Peter Korsgaard [Mon, 14 Jul 2008 07:07:32 +0000 (09:07 +0200)]
dm9601: don't do usb transfers of data on stack
dm_{read,write}() were doing USB transfers of data on stack, which isn't
allowed. Fix it by kmalloc'ing a temporary buffer.
Clean up the error handling for short transfers while we're at it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
On s2io driver, when you change the interface MTU, it invokes a card
reset, which flush some statistics. This patch solves this problem, and
also set the net_device->stats as the default statistics structure,
instead of s2io_nic->stats.
To do that, s2io_nic->stats turned into a staging area, where is saved
statistics of the last hardware statistics query. So, the difference
between the current hardware statistics and s2io_nic->stats, is the
value that should be summed up, in order to get the correct statistics
value, even after a reset.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
David Brownell [Fri, 25 Jul 2008 00:47:56 +0000 (17:47 -0700)]
enc28j60: don't specify (wrong) IRQ type
Recent changes to the IRQ framework have made passing the wrong
trigger type to request_irq() become a fatal error. In the case
of the enc28j60 driver, it stopped working in my test harness.
(Specifically: the signal detects "pin change" events, both edges,
not just falling edges. Similarly, other boards might route it
through an inverter. Trigger type are board-specific.)
This fixes that problem by the usual fix of expecting board setup
code to have set up the correct IRQ trigger type. The best known
example of that being x86 setup.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Ayaz Abdulla [Fri, 25 Jul 2008 19:31:29 +0000 (15:31 -0400)]
forcedeth bug fix: realtek phy 8211c errata
This patch adds support for the realtek 8211c phy. The driver must
perform a hardware reset of the phy due to an errata where the phy could
not detect the link.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Merge branch 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Ensure we call nfs_sb_deactive() after releasing the directory inode
nfs_remount oops when rebooting + possible fix
NFS: Ensure we call nfs_sb_deactive() after releasing the directory inode
In order to avoid the "Busy inodes after unmount" error message, we need to
ensure that nfs_async_unlink_release() releases the super block after the
call to nfs_free_unlinkdata().
The new super.c:nfs_remount function doesn't check the validity of the
options/options4 pointers. Unfortunately, this seems to happend.
The obvious patch seems to check the pointers, and not to do anything if
the happend to be NULL.
Tested on an XScale PXA255 system, latest git.
Regards,
M.
Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Thomas Gleixner [Sun, 27 Jul 2008 19:43:11 +0000 (21:43 +0200)]
x86: fix cpu hotplug on 32bit
commit 3e9704739daf46a8ba6593d749c67b5f7cd633d2 ("x86: boot secondary
cpus through initial_code") causes the kernel to crash when a CPU is
brought online after the read only sections have been write
protected. The write to initial_code in do_boot_cpu() fails.
Move inital_code to .cpuinit.data section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@zytor.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: state userland requirements in Kconfig help
firewire: avoid memleak after phy config transmit failure
firewire: fw-ohci: TSB43AB22/A dualbuffer workaround
firewire: queue the right number of data
firewire: warn on unfinished transactions during card removal
firewire: small fw_fill_request cleanup
firewire: fully initialize fw_transaction before marking it pending
firewire: fix race of bus reset with request transmission
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (59 commits)
[SCSI] replace __FUNCTION__ with __func__
[SCSI] extend the last_sector_bug flag to cover more sectors
[SCSI] qla2xxx: Update version number to 8.02.01-k6.
[SCSI] qla2xxx: Additional NPIV corrections.
[SCSI] qla2xxx: suppress uninitialized-var warning
[SCSI] qla2xxx: use memory_read_from_buffer()
[SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware.
[SCSI] ch: fix ch_remove oops
[SCSI] 3w-9xxx: add MSI support and misc fixes
[SCSI] scsi_lib: use blk_rq_tagged in scsi_request_fn
[SCSI] ibmvfc: Update driver version to 1.0.1
[SCSI] ibmvfc: Add ADISC support
[SCSI] ibmvfc: Miscellaneous fixes
[SCSI] ibmvfc: Fix hang on module removal
[SCSI] ibmvfc: Target refcounting fixes
[SCSI] ibmvfc: Reduce unnecessary log noise
[SCSI] sym53c8xx: free luntbl in sym_hcb_free
[SCSI] scsi_scan.c: Release mutex in error handling code
[SCSI] scsi_eh_prep_cmnd should save scmd->underflow
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field
...
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
avr32: some mmc/sd cleanups
include/video/atmel_lcdc.h must #include <linux/workqueue.h>
avr32: allow system timer to share interrupt to make OProfile work
drivers/misc/atmel-ssc.c: Removed duplicated include
avr32: Add platform data for AC97C platform device
avr32: clean up mci platform code
fix avr32 build errors
Merge branch 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: ppc: fix invalidation of large guest pages
KVM: s390: Fix possible host kernel bug on lctl(g) handling
KVM: s390: Fix instruction naming for lctlg
KVM: s390: Fix program check on interrupt delivery handling
KVM: s390: Change guestaddr type in gaccess
KVM: s390: Fix guest kconfig
KVM: s390: Advertise KVM_CAP_USER_MEMORY
KVM: ia64: Fix irq disabling leak in error handling code
KVM: VMX: Fix undefined beaviour of EPT after reload kvm-intel.ko
KVM: VMX: Fix bypass_guest_pf enabling when disable EPT in module parameter
KVM: task switch: translate guest segment limit to virt-extension byte granular field
KVM: Avoid instruction emulation when event delivery is pending
KVM: task switch: use seg regs provided by subarch instead of reading from GDT
KVM: task switch: segment base is linear address
KVM: SVM: allow enabling/disabling NPT by reloading only the architecture module
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
setlocalversion: do not describe if there is nothing to describe
kconfig: fix typos: "Suport" -> "Support"
kconfig: make defconfig is no longer chatty
kconfig: make oldconfig is now less chatty
kconfig: speed up all*config + randconfig
kconfig: set all new symbols automatically
kconfig: add diffconfig utility
kbuild: remove Module.markers during mrproper
kbuild: sparse needs CF not CHECKFLAGS
kernel-doc: handle/strip __init
vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
init: fix URL of "The GNU Accounting Utilities"
kbuild: add arch/$ARCH/include to search path
kbuild: asm symlink support for arch/$ARCH/include
kbuild: support arch/$ARCH/include for tags, cscope
kbuild: prepare headers_* for arch/$ARCH/include
kbuild: install all headers when arch is changed
kbuild: make clean removes *.o.* as well
kbuild: optimize headers_* targets
kbuild: only one call for include/ in make headers_*
...
Andrea Righi [Sun, 27 Jul 2008 15:29:15 +0000 (17:29 +0200)]
task IO accounting: improve code readability
Put all i/o statistics in struct proc_io_accounting and use inline functions to
initialize and increment statistics, removing a lot of single variable
assignments.
This also reduces the kernel size as following (with CONFIG_TASK_XACCT=y and
CONFIG_TASK_IO_ACCOUNTING=y).
text data bss dec hex filename
11651 0 0 11651 2d83 kernel/exit.o.before
11619 0 0 11619 2d63 kernel/exit.o.after
10886 132 136 11154 2b92 kernel/fork.o.before
10758 132 136 11026 2b12 kernel/fork.o.after
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
ALSA: cs4232: fix crash during chip PNP detection
ALSA: hda - Add automatic model setting for the Acer Aspire 5920G laptop
ALSA: make snd_ac97_add_vmaster() static
ALSA: sound/pci/azt3328.h: no variables for enums
ALSA: soc - wm9712 mono mixer
ALSA: hda - Add support of ASUS Eeepc P90*
ALSA: opti9xx: no isapnp param for !CONFIG_PNP
ALSA: opti93x - Fix NULL dereference
ALSA: hda - Added support for Asus V1Sn
ALSA: ASoC: Factor PGA DAPM handling into main
ALSA: ASoC: Refactor DAPM event handler
ALSA: ALSA: ens1370: communicate PCI device to AC97
ALSA: ens1370: SRC stands for Sample Rate Converter
ALSA: hda - Align BDL position adjustment parameter
ALSA: Au1xpsc: psc not disabled when TX is idle
ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.
Al Viro [Sun, 27 Jul 2008 07:59:33 +0000 (08:59 +0100)]
missing bits of net-namespace / sysctl
Piss-poor sysctl registration API strikes again, film at 11...
What we really need is _pathname_ required to be present in already
registered table, so that kernel could warn about bad order. That's the
next target for sysctl stuff (and generally saner and more explicit
order of initialization of ipv[46] internals wouldn't hurt either).
For the time being, here are full fixups required by ..._rotable()
stuff; we make per-net sysctl sets descendents of "ro" one and make sure
that sufficient skeleton is there before we start registering per-net
sysctls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harvey Harrison [Fri, 4 Jul 2008 06:47:27 +0000 (23:47 -0700)]
[SCSI] replace __FUNCTION__ with __func__
[jejb: fixed up a ton of missed conversions.
All of you are on notice this has happened, driver trees will now
need to be rebased]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Alan Jenkins [Sun, 27 Jul 2008 08:38:42 +0000 (09:38 +0100)]
[SCSI] extend the last_sector_bug flag to cover more sectors
The last_sector_bug flag was added to work around a bug in certain usb
cardreaders, where they would crash if a multiple sector read included the
last sector. The original implementation avoids this by e.g. splitting an 8
sector read which includes the last sector into a 7 sector read, and a single
sector read for the last sector. The flag is enabled for all USB devices.
This revealed a second bug in other usb cardreaders, which crash when they
get a multiple sector read which stops 1 sector short of the last sector.
Affected hardware includes the Kingston "MobileLite" external USB cardreader
and the internal USB cardreader on the Asus EeePC.
Extend the last_sector_bug workaround to ensure that any access which touches
the last 8 hardware sectors of the device is a single sector long. Requests
are shrunk as necessary to meet this constraint.
This gives us a safety margin against potential unknown or future bugs
affecting multi-sector access to the end of the device. The two known bugs
only affect the last 2 sectors. However, they suggest that these devices
are prone to fencepost errors and that multi-sector access to the end of the
device is not well tested. Popular OS's use multi-sector accesses, but they
rarely read the last few sectors. Linux (with udev & vol_id) automatically
reads sectors from the end of the device on insertion. It is assumed that
single sector accesses are more thoroughly tested during development.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
David Brownell [Sun, 27 Jul 2008 09:34:45 +0000 (02:34 -0700)]
avr32: some mmc/sd cleanups
Minor cleanups for the MMC/SD support on avr32:
- Make at32_add_device_mci() properly initialize "missing"
platform data ... so boards like STK1002 won't try GPIO 0.
- Switch over to gpio_is_valid() instead of testing for only
one designated value.
- Provide STK1002 platform data for the unlikely case that
switches are set so first Ethernet controller isn't in use.
(That's the only way to get card detect and writeprotect
switch sensing on the STK1000.)
And get rid of one "unused variable" warning.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Al Viro [Sun, 27 Jul 2008 11:40:51 +0000 (04:40 -0700)]
net: missing bits of net-namespace / sysctl
Piss-poor sysctl registration API strikes again, film at 11...
What we really need is _pathname_ required to be present in
already registered table, so that kernel could warn about bad
order. That's the next target for sysctl stuff (and generally
saner and more explicit order of initialization of ipv[46]
internals wouldn't hurt either).
For the time being, here are full fixups required by ..._rotable()
stuff; we make per-net sysctl sets descendents of "ro" one and
make sure that sufficient skeleton is there before we start registering
per-net sysctls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 27 Jul 2008 10:59:24 +0000 (03:59 -0700)]
ipcomp: Fix warnings after ipcomp consolidation.
net/ipv4/ipcomp.c: In function ‘ipcomp4_init_state’:
net/ipv4/ipcomp.c:109: warning: unused variable ‘calg_desc’
net/ipv4/ipcomp.c:108: warning: unused variable ‘ipcd’
net/ipv4/ipcomp.c:107: warning: ‘err’ may be used uninitialized in this function
net/ipv6/ipcomp6.c: In function ‘ipcomp6_init_state’:
net/ipv6/ipcomp6.c:139: warning: unused variable ‘calg_desc’
net/ipv6/ipcomp6.c:138: warning: unused variable ‘ipcd’
net/ipv6/ipcomp6.c:137: warning: ‘err’ may be used uninitialized in this function
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Sun, 27 Jul 2008 09:35:54 +0000 (10:35 +0100)]
[ARM] Fix shared mmap when more than two maps of the same file exist
The shared mmap code works fine for the test case, which only checked
for two shared maps of the same file. However, three shared maps
result in one mapping remaining cached, resulting in stale data being
visible via that mapping. Fix this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
... VIVT only stuff
... VIPT only stuff
... VIVT or VIPT stuff
which is clearly bogus - we would only ever use the "VIVT or VIPT" case
when both VIVT and VIPT are not selected. Fix this.
Add comments to each case, including noting the impossibility of
correctly detecting the cache type of ARM926 and ARMv6 cores from
the cache type register in the "VIVT or VIPT" case.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When guest invalidates a large tlb map, there may be more than one
corresponding shadow tlb maps that need to be invalidated. Use eaddr and eend
to find these shadow tlb maps.
Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM: s390: Fix possible host kernel bug on lctl(g) handling
The lctl(g) instructions require a specific alignment for the parameters.
The architecture requires a specification program check if these alignments
are not used. Enforcing this alignment also removes a possible host BUG,
since the get_guest functions check for proper alignment and emits a BUG.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM: s390: Fix program check on interrupt delivery handling
The current interrupt handling on s390 misbehaves on an error case. On s390
each cpu has the prefix area (lowcore) for interrupt delivery. This memory
must always be available. If we fail to access the prefix area for a guest
on interrupt delivery the configuration is completely unusable. There is no
point in sending another program interrupt to an inaccessible lowcore.
Furthermore, we should not bug the host kernel, because this can be triggered
by userspace. I think the guest kernel itself can not trigger the problem, as
SET PREFIX and SIGNAL PROCESSOR SET PREFIX both check that the memory is
available and sane. As this is a userspace bug (e.g. setting the wrong guest
offset, unmapping guest memory) we should kill the userspace process instead
of BUGing the host kernel.
In the long term we probably should notify the userspace process about this
problem.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
All registers are unsigned long types. This patch changes all occurences
of guestaddr in gaccess from u64 to unsigned long.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
The virtio transport only works with kvm guest support and only as a
builtin. Lets change the build process of drivers/s390/kvm/kvm_virtio.c
to depend on kvm guest support, which is also a bool.
CONFIG_S390_GUEST already selects CONFIG_VIRTIO, that should prevent
CONFIG_S390_GUEST=y CONFIG_VIRTIO=n situations.
CC: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
Julia Lawall [Tue, 22 Jul 2008 19:38:18 +0000 (21:38 +0200)]
KVM: ia64: Fix irq disabling leak in error handling code
There is a call to local_irq_restore in the normal exit case, so it would
seem that there should be one on an error return as well.
The semantic patch that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression l;
expression E,E1,E2;
@@
local_irq_save(l);
... when != local_irq_restore(l)
when != spin_unlock_irqrestore(E,l)
when any
when strict
(
if (...) { ... when != local_irq_restore(l)
when != spin_unlock_irqrestore(E1,l)
+ local_irq_restore(l);
return ...;
}
|
if (...)
+ {local_irq_restore(l);
return ...;
+ }
|
spin_unlock_irqrestore(E2,l);
|
local_irq_restore(l);
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Avi Kivity <avi@qumranet.com>
Avi Kivity [Sat, 19 Jul 2008 05:57:05 +0000 (08:57 +0300)]
KVM: Avoid instruction emulation when event delivery is pending
When an event (such as an interrupt) is injected, and the stack is
shadowed (and therefore write protected), the guest will exit. The
current code will see that the stack is shadowed and emulate a few
instructions, each time postponing the injection. Eventually the
injection may succeed, but at that time the guest may be unwilling
to accept the interrupt (for example, the TPR may have changed).
This occurs every once in a while during a Windows 2008 boot.
Fix by unshadowing the fault address if the fault was due to an event
injection.
KVM: task switch: use seg regs provided by subarch instead of reading from GDT
There is no guarantee that the old TSS descriptor in the GDT contains
the proper base address. This is the case for Windows installation's
reboot-via-triplefault.
Use guest registers instead. Also translate the address properly.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM: SVM: allow enabling/disabling NPT by reloading only the architecture module
If NPT is enabled after loading both KVM modules on AMD and it should be
disabled, both KVM modules must be reloaded. If only the architecture module is
reloaded the behavior is undefined. With this patch it is possible to disable
NPT only by reloading the kvm_amd module.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
Nicolas Boichat [Mon, 21 Jul 2008 14:18:01 +0000 (22:18 +0800)]
ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.
To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.
This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.
Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
!codec->bus->modelname) {
But I think it is less elegant (if you prefer that way, I can prepare a
patch).
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files
mlx4_core: Add VLAN tag field to WQE control segment struct
RDMA/nes: CM connection setup/teardown rework
IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUG
IPoIB/cm: Connected mode is no longer EXPERIMENTAL
RDMA/ucm: BKL is not needed for ib_ucm_open()
RDMA/ucma: BKL is not needed for ucma_open()
* git://git.infradead.org/mtd-2.6: (57 commits)
[MTD] [NAND] subpage read feature as a way to increase performance.
CPUFREQ: S3C24XX NAND driver frequency scaling support.
[MTD][NAND] au1550nd: remove unused variable
[MTD] jedec_probe: Fix SST 16-bit chip detection
[MTD][MTDPART] Fix a division by zero bug
[MTD][MTDPART] Cleanup and document the erase region handling
[MTD][MTDPART] Handle most checkpatch findings
[MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
[MTD] physmap: resume already suspended chips on failure to suspend
[MTD] physmap: Fix suspend/resume/shutdown bugs.
[MTD] [NOR] Fix -ETIMEO errors in CFI driver
[MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
[JFFS2] Use .unlocked_ioctl
[MTD] Fix const assignment in the MTD command line partitioning driver
[MTD] [NOR] gen_probe: No debug message when debugging is disabled
[MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
[MTD] [MAPS] Remove the bast-flash driver.
[MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
[MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
[MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
atmel-mci: debugfs support
mmc: Add per-card debugfs support
mmc: Export internal host state through debugfs
imxmmc: fix crash when no platform data is provided
imxmmc: fix platform resources
imxmmc: remove DEBUG definition
mmc_spi: put signals to low power off fix
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (39 commits)
[PATCH] fix RLIM_NOFILE handling
[PATCH] get rid of corner case in dup3() entirely
[PATCH] remove remaining namei_{32,64}.h crap
[PATCH] get rid of indirect users of namei.h
[PATCH] get rid of __user_path_lookup_open
[PATCH] f_count may wrap around
[PATCH] dup3 fix
[PATCH] don't pass nameidata to __ncp_lookup_validate()
[PATCH] don't pass nameidata to gfs2_lookupi()
[PATCH] new (local) helper: user_path_parent()
[PATCH] sanitize __user_walk_fd() et.al.
[PATCH] preparation to __user_walk_fd cleanup
[PATCH] kill nameidata passing to permission(), rename to inode_permission()
[PATCH] take noexec checks to very few callers that care
Re: [PATCH 3/6] vfs: open_exec cleanup
[patch 4/4] vfs: immutable inode checking cleanup
[patch 3/4] fat: dont call notify_change
[patch 2/4] vfs: utimes cleanup
[patch 1/4] vfs: utimes: move owner check into inode_change_ok()
[PATCH] vfs: use kstrdup() and check failing allocation
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
netns: fix ip_rt_frag_needed rt_is_expired
netfilter: nf_conntrack_extend: avoid unnecessary "ct->ext" dereferences
netfilter: fix double-free and use-after free
netfilter: arptables in netns for real
netfilter: ip{,6}tables_security: fix future section mismatch
selinux: use nf_register_hooks()
netfilter: ebtables: use nf_register_hooks()
Revert "pkt_sched: sch_sfq: dump a real number of flows"
qeth: use dev->ml_priv instead of dev->priv
syncookies: Make sure ECN is disabled
net: drop unused BUG_TRAP()
net: convert BUG_TRAP to generic WARN_ON
drivers/net: convert BUG_TRAP to generic WARN_ON
Randy Dunlap [Sat, 26 Jul 2008 22:22:28 +0000 (15:22 -0700)]
firmware: fix memmap printk format warnings
Fix firmware/memmap printk format warnings:
drivers/firmware/memmap.c:156: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
drivers/firmware/memmap.c:161: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Bernhard Walle <bwalle@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Sat, 26 Jul 2008 22:22:28 +0000 (15:22 -0700)]
mm/util.c must #include <linux/sched.h>
mm/util.c: In function 'arch_pick_mmap_layout':
mm/util.c:144: error: dereferencing pointer to incomplete type
mm/util.c:145: error: 'arch_get_unmapped_area' undeclared (first use in this function)
mm/util.c:145: error: (Each undeclared identifier is reported only once
mm/util.c:145: error: for each function it appears in.)
mm/util.c:146: error: 'arch_unmap_area' undeclared (first use in this function)
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Righi [Sat, 26 Jul 2008 22:22:27 +0000 (15:22 -0700)]
hugetlb: remove unused variable warning
Remove the following warning when CONFIG_HUGETLB_PAGE is not set:
ipc/shm.c: In function `shm_get_stat':
ipc/shm.c:565: warning: unused variable `h'
[akpm@linux-foundation.org: use tabs, not spaces] Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 26 Jul 2008 20:01:20 +0000 (16:01 -0400)]
[PATCH] fix RLIM_NOFILE handling
* dup2() should return -EBADF on exceeded sysctl_nr_open
* dup() should *not* return -EINVAL even if you have rlimit set to 0;
it should get -EMFILE instead.
Check for orig_start exceeding rlimit taken to sys_fcntl().
Failing expand_files() in dup{2,3}() now gets -EMFILE remapped to -EBADF.
Consequently, remaining checks for rlimit are taken to expand_files().
Al Viro [Sat, 26 Jul 2008 17:38:19 +0000 (13:38 -0400)]
[PATCH] get rid of corner case in dup3() entirely
Since Ulrich is OK with getting rid of dup3(fd, fd, flags) completely,
to hell the damn thing goes. Corner case for dup2() is handled in
sys_dup2() (complete with -EBADF if dup2(fd, fd) is called with fd
that is not open), the rest is done in dup3().
Al Viro notice one cornercase that the new dup3() code. The dup2()
function, as a special case, handles dup-ing to the same file
descriptor. In this case the current dup3() code does nothing at
all. I.e., it ingnores the flags parameter. This shouldn't happen,
the close-on-exec flag should be set if requested.
In case the O_CLOEXEC bit in the flags parameter is not set the
dup3() function should behave in this respect identical to dup2().
This means dup3(fd, fd, 0) should not actively reset the c-o-e
flag.
The patch below implements this minor change.
[AV: credits to Artur Grabowski for bringing that up as potential subtle point
in dup2() behaviour]
Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 22 Jul 2008 13:59:21 +0000 (09:59 -0400)]
[PATCH] sanitize __user_walk_fd() et.al.
* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
user_path_at(dfd, pathname, flags, &path)
user_path(pathname, &path)
user_lpath(pathname, &path)
user_path_dir(pathname, &path) (fail if not a directory)
The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.
On Mon, May 19, 2008 at 12:01:49AM +0200, Marcin Slusarz wrote:
> open_exec is needlessly indented, calls ERR_PTR with 0 argument
> (which is not valid errno) and jumps into middle of function
> just to return value.
> So clean it up a bit.
Still looks rather messy. See below for a better version.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the immutable and append-only checks from chmod, chown and utimes
into notify_change(). Checks for immutable and append-only files are
always performed by the VFS and not by the filesystem (see
permission() and may_...() in namei.c), so these belong in
notify_change(), and not in inode_change_ok().
This should be completely equivalent.
CC: Ulrich Drepper <drepper@redhat.com> CC: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The FAT_IOCTL_SET_ATTRIBUTES ioctl() calls notify_change() to change
the file mode before changing the inode attributes. Replace with
explicit calls to security_inode_setattr(), fat_setattr() and
fsnotify_change().
This is equivalent to the original. The reason it is needed, is that
later in the series we move the immutable check into notify_change().
That would break the FAT_IOCTL_SET_ATTRIBUTES ioctl, as it needs to
perform the mode change regardless of the immutability of the file.
[Fix error if fat is built as a module. Thanks to OGAWA Hirofumi for
noticing.]
[patch 1/4] vfs: utimes: move owner check into inode_change_ok()
Add a new ia_valid flag: ATTR_TIMES_SET, to handle the
UTIMES_OMIT/UTIMES_NOW and UTIMES_NOW/UTIMES_OMIT cases. In these
cases neither ATTR_MTIME_SET nor ATTR_ATIME_SET is in the flags, yet
the POSIX draft specifies that permission checking is performed the
same way as if one or both of the times was explicitly set to a
timestamp.
See the path "vfs: utimensat(): fix error checking for
{UTIME_NOW,UTIME_OMIT} case" by Michael Kerrisk for the patch
introducing this behavior.
This is a cleanup, as well as allowing filesystems (NFS/fuse/...) to
perform their own permission checking instead of the default.
CC: Ulrich Drepper <drepper@redhat.com> CC: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* MAY_CHDIR is redundant - it's an equivalent of MAY_ACCESS
* MAY_ACCESS on fuse should affect only the last step of pathname resolution
* fchdir() and chroot() should pass MAY_ACCESS, for the same reason why
chdir() needs that.
* now that we pass MAY_ACCESS explicitly in all cases, LOOKUP_ACCESS can be
removed; it has no business being in nameidata.
projects / linux-2.6 / log