]> err.no Git - linux-2.6/log
linux-2.6
18 years ago[PKTGEN]: Fix kernel_thread() fail leak.
Luiz Capitulino [Tue, 21 Mar 2006 06:17:00 +0000 (22:17 -0800)]
[PKTGEN]: Fix kernel_thread() fail leak.

Free all the alocated resources if kernel_thread() call fails.

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKTGEN]: Ports thread list to Kernel list implementation.
Luiz Capitulino [Tue, 21 Mar 2006 06:16:40 +0000 (22:16 -0800)]
[PKTGEN]: Ports thread list to Kernel list implementation.

The final result is a simpler and smaller code.

Note that I'm adding a new member in the struct pktgen_thread called
'removed'. The reason is that I didn't find a better wait condition to
be used in the place of the replaced one.

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKTGEN]: Lindent run.
Luiz Capitulino [Tue, 21 Mar 2006 06:16:13 +0000 (22:16 -0800)]
[PKTGEN]: Lindent run.

Lindet run, with some fixes made by hand.

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] options: Fix some aspects of mandatory option processing
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 06:06:02 +0000 (22:06 -0800)]
[DCCP] options: Fix some aspects of mandatory option processing

According to dccp draft (draft-ietf-dccp-spec-13.txt) section 5.8.2
(Mandatory Option) the following patch correct the handling of the
following cases:

1) "... and any Mandatory options received on DCCP-Data packets MUST be
  ignored."

2) "The connection is in error and should be reset with Reset Code 5, ...
  if option O is absent (Mandatory was the last byte of the option list), or
  if option O equals Mandatory."

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ccid2: coding style cleanups
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 06:05:37 +0000 (22:05 -0800)]
[DCCP] ccid2: coding style cleanups

No changes in the logic where made.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ipv6: cleanups
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 06:01:29 +0000 (22:01 -0800)]
[DCCP] ipv6: cleanups

No changes in the logic were made, just removing trailing whitespaces,
etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[ICSK]: Introduce inet_csk_ctl_sock_create
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 06:01:03 +0000 (22:01 -0800)]
[ICSK]: Introduce inet_csk_ctl_sock_create

Consolidating open coded sequences in tcp and dccp, v4 and v6.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ipv6: Add missing ipv6 control socket
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 06:00:37 +0000 (22:00 -0800)]
[DCCP] ipv6: Add missing ipv6 control socket

I guess I forgot to add it, nah, now it just works:

18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0)
18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code)

Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both
IPv6 and IPv4, so I'll come up with another way for freeing the
control sockets in upcoming changesets.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Uninline some functions
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:58:56 +0000 (21:58 -0800)]
[DCCP]: Uninline some functions

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ipv4: make struct dccp_v4_prot static
Adrian Bunk [Tue, 21 Mar 2006 05:58:29 +0000 (21:58 -0800)]
[DCCP] ipv4: make struct dccp_v4_prot static

There's no reason for struct dccp_v4_prot being global.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPV6]: Fix some code/comment formatting in ip6_dst_output().
David S. Miller [Tue, 21 Mar 2006 05:35:50 +0000 (21:35 -0800)]
[IPV6]: Fix some code/comment formatting in ip6_dst_output().

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPV4]: fib_trie stats fix
Robert Olsson [Tue, 21 Mar 2006 05:35:01 +0000 (21:35 -0800)]
[IPV4]: fib_trie stats fix

fib_triestats has been buggy and caused oopses some platforms as
openwrt.  The patch below should cure those problems.

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPV4]: fib_trie initialzation fix
Robert Olsson [Tue, 21 Mar 2006 05:34:12 +0000 (21:34 -0800)]
[IPV4]: fib_trie initialzation fix

In some kernel configs /proc functions seems to be accessed before the
trie is initialized. The patch below checks for this.

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Fix tg3_get_ringparam()
Michael Chan [Tue, 21 Mar 2006 05:33:42 +0000 (21:33 -0800)]
[TG3]: Fix tg3_get_ringparam()

Fix-up tg3_get_ringparam() to return the correct parameters.

Set the jumbo rx ring parameter only if it is supported by the chip
and currently in use.

Add missing value for tx_max_pending, noticed by Rick Jones.

Update version to 3.51.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Add some missing netif_running() checks
Michael Chan [Tue, 21 Mar 2006 05:33:26 +0000 (21:33 -0800)]
[TG3]: Add some missing netif_running() checks

Add missing netif_running() checks in tg3's dev->set_multicast_list()
and dev->set_mac_address(). If not netif_running(), these 2 calls can
simply return 0 after storing the new settings if required.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TCP] mtu probing: move tcp-specific data out of inet_connection_sock
John Heffner [Tue, 21 Mar 2006 05:32:58 +0000 (21:32 -0800)]
[TCP] mtu probing: move tcp-specific data out of inet_connection_sock

This moves some TCP-specific MTU probing state out of
inet_connection_sock back to tcp_sock.

Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[AF_UNIX]: scm: better initialization
Benjamin LaHaise [Tue, 21 Mar 2006 05:31:51 +0000 (21:31 -0800)]
[AF_UNIX]: scm: better initialization

Instead of doing a memset then initialization of the fields of the scm
structure, just initialize all the members explicitly.  Prevent reloading
of current on x86 and x86-64 by storing the value in a local variable for
subsequent dereferences.  This is worth a ~7KB/s increase in af_unix
bandwidth.  Note that we avoid the issues surrounding potentially
uninitialized members of the ucred structure by constructing a struct
ucred instead of assigning the members individually, which forces the
compiler to zero any padding.

[ I modified the patch not to use the aggregate assignment since
  gcc-3.4.x and earlier cannot optimize that properly at all even
  though gcc-4.0.x and later can -DaveM ]

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[AF_UNIX]: use shift instead of integer division
Benjamin LaHaise [Tue, 21 Mar 2006 05:29:05 +0000 (21:29 -0800)]
[AF_UNIX]: use shift instead of integer division

The patch below replaces a divide by 2 with a shift -- sk_sndbuf is an
integer, so gcc emits an idiv, which takes 10x longer than a shift by 1.
This improves af_unix bandwidth by ~6-10K/s.  Also, tidy up the comment
to fit in 80 columns while we're at it.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NET]: Uninline kfree_skb and allow NULL argument
Jörn Engel [Tue, 21 Mar 2006 05:28:35 +0000 (21:28 -0800)]
[NET]: Uninline kfree_skb and allow NULL argument

o Uninline kfree_skb, which saves some 15k of object code on my notebook.

o Allow kfree_skb to be called with a NULL argument.

  Subsequent patches can remove conditional from drivers and further
  reduce source and object size.

Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[LLC]: Fix sap refcounting
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:28:11 +0000 (21:28 -0800)]
[LLC]: Fix sap refcounting

Thanks to Leslie Harlley Watter <leslie@watter.org> for reporting the
problem an testing this patch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[LLC]: Replace __inline__ with inline
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:27:43 +0000 (21:27 -0800)]
[LLC]: Replace __inline__ with inline

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[LLC]: Fix struct proto .name
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:27:23 +0000 (21:27 -0800)]
[LLC]: Fix struct proto .name

Cut'n'paste error from ddp_proto.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NET] pktgen: Fix races between control/worker threads.
Arthur Kepner [Tue, 21 Mar 2006 05:26:56 +0000 (21:26 -0800)]
[NET] pktgen: Fix races between control/worker threads.

There's a race in pktgen which can lead to a double
free of a pktgen_dev's skb. If a worker thread is in
the midst of doing fill_packet(), and the controlling
thread gets a "stop" message, the already freed skb
can be freed once again in pktgen_stop_device(). This
patch gives all responsibility for cleaning up a
pktgen_dev's skb to the associated worker thread.

Signed-off-by: Arthur Kepner <akepner@sgi.com>
Acked-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[XFRM]: Rearrange struct xfrm_aevent_id for better compatibility.
Jamal Hadi Salim [Tue, 21 Mar 2006 05:25:50 +0000 (21:25 -0800)]
[XFRM]: Rearrange struct xfrm_aevent_id for better compatibility.

struct xfrm_aevent_id needs to be 32-bit + 64-bit align friendly.

Based upon suggestions from Yoshifuji.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Move the IPv4 specific bits from proto.c to ipv4.c
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:25:11 +0000 (21:25 -0800)]
[DCCP]: Move the IPv4 specific bits from proto.c to ipv4.c

With this patch in place we can break down the complexity by better
compartmentalizing the code that is common to ipv6 and ipv4.

Now we have these modules:
Module                  Size  Used by
dccp_diag               1344  0
inet_diag               9448  1 dccp_diag
dccp_ccid3             15856  0
dccp_tfrc_lib          12320  1 dccp_ccid3
dccp_ccid2              5764  0
dccp_ipv4              16996  2
dccp                   48208  4 dccp_diag,dccp_ccid3,dccp_ccid2,dccp_ipv4

dccp_ipv6 still requires dccp_ipv4 due to dccp_ipv6_mapped, that is
the next target to work on the "hey, ipv4 is legacy, I only want ipv6
dude!" direction.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Rename init_dccp_v4_mibs to dccp_mib_init
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:24:42 +0000 (21:24 -0800)]
[DCCP]: Rename init_dccp_v4_mibs to dccp_mib_init

And introduce dccp_mib_exit grouping previously open coded sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Move dccp_hashinfo from ipv4.c to the core
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:24:19 +0000 (21:24 -0800)]
[DCCP]: Move dccp_hashinfo from ipv4.c to the core

As it is used by both ipv4 and ipv6.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Dont use dccp_v4_checksum in dccp_make_response
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:23:59 +0000 (21:23 -0800)]
[DCCP]: Dont use dccp_v4_checksum in dccp_make_response

dccp_make_response is shared by ipv4/6 and the ipv6 code was
recalculating the checksum, not good, so move the dccp_v4_checksum
call to dccp_v4_send_response.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Move dccp_[un]hash from ipv4.c to the core
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:23:39 +0000 (21:23 -0800)]
[DCCP]: Move dccp_[un]hash from ipv4.c to the core

As this is used by both ipv4 and ipv6 and is not ipv4 specific.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Move dccp_v4_{init,destroy}_sock to the core
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 05:23:15 +0000 (21:23 -0800)]
[DCCP]: Move dccp_v4_{init,destroy}_sock to the core

Removing one more ipv6 uses ipv4 stuff case in dccp land.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Generalize dccp_v4_send_reset
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 03:25:24 +0000 (19:25 -0800)]
[DCCP]: Generalize dccp_v4_send_reset

Renaming it to dccp_send_reset and moving it from the ipv4 specific
code to the core dccp code.

This fixes some bugs in IPV6 where timers would send v4 resets, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] feat: Introduce sysctls for the default features
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 03:25:02 +0000 (19:25 -0800)]
[DCCP] feat: Introduce sysctls for the default features

[root@qemu ~]# for a in /proc/sys/net/dccp/default/* ; do echo $a ; cat $a ; done
/proc/sys/net/dccp/default/ack_ratio
2
/proc/sys/net/dccp/default/rx_ccid
3
/proc/sys/net/dccp/default/send_ackvec
1
/proc/sys/net/dccp/default/send_ndp
1
/proc/sys/net/dccp/default/seq_window
100
/proc/sys/net/dccp/default/tx_ccid
3
[root@qemu ~]#

So if wanting to test ccid3 as the tx CCID one can just do:

[root@qemu ~]# echo 3 > /proc/sys/net/dccp/default/tx_ccid
[root@qemu ~]# echo 2 > /proc/sys/net/dccp/default/rx_ccid
[root@qemu ~]# cat /proc/sys/net/dccp/default/[tr]x_ccid
2
3
[root@qemu ~]#

Of course we also need the setsockopt for each app to tell its preferences, but
for testing or defining something other than CCID2 as the default for apps that
don't explicitely set their preference the sysctl interface is handy.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Call dccp_feat_init more early in dccp_v4_init_sock
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 03:24:41 +0000 (19:24 -0800)]
[DCCP]: Call dccp_feat_init more early in dccp_v4_init_sock

So that dccp_feat_clean doesn't get confused with uninitialized
list_heads.

Noticed when testing with no ccid kernel modules.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Kconfig tidy up
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 03:24:22 +0000 (19:24 -0800)]
[DCCP]: Kconfig tidy up

Make CCID2 and CCID3 default to what was selected for DCCP and use the
standard short description for the CCIDs (TCP-Like & TCP-Friendly).

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Make CCID2 be the default
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 03:23:58 +0000 (19:23 -0800)]
[DCCP]: Make CCID2 be the default

As per the draft. This fixes the build when netfilter dccp components
are built and dccp isn't. Thanks to Reuben Farrelly for reporting
this.

The following changesets will introduce /proc/sys/net/dccp/defaults/
to give more flexibility to DCCP developers and testers while apps
doesn't use setsockopt to specify the desired CCID, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: sparse endianness annotations
Andrea Bittau [Tue, 21 Mar 2006 03:23:32 +0000 (19:23 -0800)]
[DCCP]: sparse endianness annotations

This also fixes the layout of dccp_hdr short sequence numbers, problem
was not fatal now as we only support long (48 bits) sequence numbers.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Fix skb->nf_bridge lifetime issues
Patrick McHardy [Tue, 21 Mar 2006 03:23:05 +0000 (19:23 -0800)]
[NETFILTER]: Fix skb->nf_bridge lifetime issues

The bridge netfilter code simulates the NF_IP_PRE_ROUTING hook and skips
the real hook by registering with high priority and returning NF_STOP if
skb->nf_bridge is present and the BRNF_NF_BRIDGE_PREROUTING flag is not
set. The flag is only set during the simulated hook.

Because skb->nf_bridge is only freed when the packet is destroyed, the
packet will not only skip the first invocation of NF_IP_PRE_ROUTING, but
in the case of tunnel devices on top of the bridge also all further ones.
Forwarded packets from a bridge encapsulated by a tunnel device and sent
as locally outgoing packet will also still have the incorrect bridge
information from the input path attached.

We already have nf_reset calls on all RX/TX paths of tunnel devices,
so simply reset the nf_bridge field there too. As an added bonus,
the bridge information for locally delivered packets is now also freed
when the packet is queued to a socket.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] feat: Actually change the CCID upon negotiation
Andrea Bittau [Tue, 21 Mar 2006 03:22:37 +0000 (19:22 -0800)]
[DCCP] feat: Actually change the CCID upon negotiation

Change the CCID upon successful feature negotiation.

Commiter note: patch mostly rewritten to use the new ccid API.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] CCID: Improve CCID infrastructure
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 03:21:44 +0000 (19:21 -0800)]
[DCCP] CCID: Improve CCID infrastructure

1. No need for ->ccid_init nor ->ccid_exit, this is what module_{init,exit}
   does and anynways neither ccid2 nor ccid3 were using it.

2. Rename struct ccid to struct ccid_operations and introduce struct ccid
   with a pointer to ccid_operations and rigth after it the rx or tx
   private state.

3. Remove the pointer to the state of the half connections from struct
   dccp_sock, now its derived thru ccid_priv() from the ccid pointer.

Now we also can implement the setsockopt for changing the CCID easily as
no ccid init routines can affect struct dccp_sock in any way that prevents
other CCIDs from working if a CCID switch operation is asked by apps.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKT_SCHED]: Convert sch_red to a classful qdisc
Patrick McHardy [Tue, 21 Mar 2006 03:20:44 +0000 (19:20 -0800)]
[PKT_SCHED]: Convert sch_red to a classful qdisc

Convert sch_red to a classful qdisc. All qdiscs that maintain accurate
backlog counters are eligible as child qdiscs. When a queue limit larger
than zero is given, a bfifo qdisc is used for backwards compatibility.
Current versions of tc enforce a limit larger than zero, other users
can avoid creating the default qdisc by using zero.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[XFRM]: Add some missing exports.
David S. Miller [Tue, 21 Mar 2006 03:18:52 +0000 (19:18 -0800)]
[XFRM]: Add some missing exports.

To fix the case of modular xfrm_user.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[XFRM]: Move xfrm_nl to xfrm_state.c from xfrm_user.c
David S. Miller [Tue, 21 Mar 2006 03:18:37 +0000 (19:18 -0800)]
[XFRM]: Move xfrm_nl to xfrm_state.c from xfrm_user.c

xfrm_user could be modular, and since generic code uses this symbol
now...

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[XFRM]: Make sure xfrm_replay_timer_handler() is declared early enough.
David S. Miller [Tue, 21 Mar 2006 03:18:23 +0000 (19:18 -0800)]
[XFRM]: Make sure xfrm_replay_timer_handler() is declared early enough.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - update selinux
Jamal Hadi Salim [Tue, 21 Mar 2006 03:17:39 +0000 (19:17 -0800)]
[IPSEC]: Sync series - update selinux

Add new netlink messages to selinux framework

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - policy expires
Jamal Hadi Salim [Tue, 21 Mar 2006 03:17:25 +0000 (19:17 -0800)]
[IPSEC]: Sync series - policy expires

This is similar to the SA expire insertion patch - only it inserts
expires for SP.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - SA expires
Jamal Hadi Salim [Tue, 21 Mar 2006 03:17:03 +0000 (19:17 -0800)]
[IPSEC]: Sync series - SA expires

This patch allows a user to insert SA expires. This is useful to
do on an HA backup for the case of byte counts but may not be very
useful for the case of time based expiry.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - acquire insert
Jamal Hadi Salim [Tue, 21 Mar 2006 03:16:40 +0000 (19:16 -0800)]
[IPSEC]: Sync series - acquire insert

This introduces a feature similar to the one described in RFC 2367:
"
   ... the application needing an SA sends a PF_KEY
   SADB_ACQUIRE message down to the Key Engine, which then either
   returns an error or sends a similar SADB_ACQUIRE message up to one or
   more key management applications capable of creating such SAs.
   ...
   ...
   The third is where an application-layer consumer of security
   associations (e.g.  an OSPFv2 or RIPv2 daemon) needs a security
   association.

        Send an SADB_ACQUIRE message from a user process to the kernel.

        <base, address(SD), (address(P),) (identity(SD),) (sensitivity,)
          proposal>

        The kernel returns an SADB_ACQUIRE message to registered
          sockets.

        <base, address(SD), (address(P),) (identity(SD),) (sensitivity,)
          proposal>

        The user-level consumer waits for an SADB_UPDATE or SADB_ADD
        message for its particular type, and then can use that
        association by using SADB_GET messages.

 "
An app such as OSPF could then use ipsec KM to get keys

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - user
Jamal Hadi Salim [Tue, 21 Mar 2006 03:16:12 +0000 (19:16 -0800)]
[IPSEC]: Sync series - user

Add xfrm as the user of the core changes

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - fast path
Jamal Hadi Salim [Tue, 21 Mar 2006 03:15:29 +0000 (19:15 -0800)]
[IPSEC]: Sync series - fast path

Fast path sequence updates that will generate ipsec async
events

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPSEC]: Sync series - core changes
Jamal Hadi Salim [Tue, 21 Mar 2006 03:15:11 +0000 (19:15 -0800)]
[IPSEC]: Sync series - core changes

This patch provides the core functionality needed for sync events
for ipsec. Derived work of Krisztian KOVACS <hidden@balabit.hu>

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKT_SCHED]: Keep backlog counter in sch_sfq
Patrick McHardy [Tue, 21 Mar 2006 03:01:38 +0000 (19:01 -0800)]
[PKT_SCHED]: Keep backlog counter in sch_sfq

Keep backlog counter in SFQ qdisc to make it usable as child qdisc
with RED.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKT_SCHED]: Restore TBF change semantic
Patrick McHardy [Tue, 21 Mar 2006 03:01:21 +0000 (19:01 -0800)]
[PKT_SCHED]: Restore TBF change semantic

When TBF was converted to a classful qdisc, the semantic of the limit
parameter was broken. On initilization an inner bfifo qdisc is created
for backwards compatibility, when changing parameters however the new
limit is ignored and the current child qdisc remains in place.

Always replace the child qdisc by the default bfifo when limit is above
zero, otherwise don't touch the inner qdisc. Current tc version enforce
a limit above zero, other users can avoid creating the inner qdisc by
using zero.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKT_SCHED]: Dump child qdisc handle in sch_{atm,dsmark}
Patrick McHardy [Tue, 21 Mar 2006 03:01:06 +0000 (19:01 -0800)]
[PKT_SCHED]: Dump child qdisc handle in sch_{atm,dsmark}

A qdisc should set tcm_info to the child qdisc handle in its class
dump function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PKT_SCHED]: Qdisc drop operation is optional
Patrick McHardy [Tue, 21 Mar 2006 03:00:49 +0000 (19:00 -0800)]
[PKT_SCHED]: Qdisc drop operation is optional

The drop operation is optional and qdiscs must check if childs support it.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IRDA]: pci_register_driver conversion
Christophe Lucas [Tue, 21 Mar 2006 03:00:27 +0000 (19:00 -0800)]
[IRDA]: pci_register_driver conversion

This patch converts 2 IrDA drivers pci_module_init() calls to
pci_register_driver().

Signed-off-by: Christophe Lucas <clucas@ifrance.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IRDA]: sti/cli removal from EP7211 IrDA driver
David chosrova [Tue, 21 Mar 2006 03:00:04 +0000 (19:00 -0800)]
[IRDA]: sti/cli removal from EP7211 IrDA driver

This patch replaces the deprecated sti/cli routines with the corresponding
spin_lock ones.

Signed-off-by: David chosrova <david.chosrova@libertysurf.fr>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IRDA]: nsc-ircc: support for yet another Thinkpad IrDA chipset
Jean Tourrilhes [Tue, 21 Mar 2006 02:59:40 +0000 (18:59 -0800)]
[IRDA]: nsc-ircc: support for yet another Thinkpad IrDA chipset

This patch simply adds support for a variation of the nsc-ircc PC8739x
chipset, found in some IBM Thinkpad laptops.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IRDA]: nsc-ircc: PM update
Dmitry Torokhov [Tue, 21 Mar 2006 02:59:05 +0000 (18:59 -0800)]
[IRDA]: nsc-ircc: PM update

This patch brings the nsc-ircc code to a more up to date power
management scheme, following the current device model.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IRDA]: nsc-ircc: ISAPnP support
Jean Tourrilhes [Tue, 21 Mar 2006 02:54:03 +0000 (18:54 -0800)]
[IRDA]: nsc-ircc: ISAPnP support

This enables PnP support for the nsc-ircc chipset.
Since we can't fetch the chipset cfg_base from the PnP layer, we just use
the PnP information as one more hint when probing the chip.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETLINK]: Add netlink_has_listeners for avoiding unneccessary event message generation
Patrick McHardy [Tue, 21 Mar 2006 02:52:01 +0000 (18:52 -0800)]
[NETLINK]: Add netlink_has_listeners for avoiding unneccessary event message generation

Keep a bitmask of multicast groups with subscribed listeners to let
netlink users check for listeners before generating multicast
messages.

Queries don't perform any locking, which may result in false
positives, it is guaranteed however that any new subscriptions are
visible before bind() or setsockopt() return.

Signed-off-by: Patrick McHardy <kaber@trash.net>
ACKed-by: Jamal Hadi Salim<hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: ctnetlink: avoid unneccessary event message generation
Patrick McHardy [Tue, 21 Mar 2006 02:03:59 +0000 (18:03 -0800)]
[NETFILTER]: ctnetlink: avoid unneccessary event message generation

Avoid unneccessary event message generation by checking for netlink
listeners before building a message.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: x_tables: replace IPv4/IPv6 policy match by address family independant...
Patrick McHardy [Tue, 21 Mar 2006 02:03:40 +0000 (18:03 -0800)]
[NETFILTER]: x_tables: replace IPv4/IPv6 policy match by address family independant version

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Move ip6_masked_addrcmp to include/net/ipv6.h
Patrick McHardy [Tue, 21 Mar 2006 02:03:16 +0000 (18:03 -0800)]
[NETFILTER]: Move ip6_masked_addrcmp to include/net/ipv6.h

Replace netfilter's ip6_masked_addrcmp by a more efficient version
in include/net/ipv6.h to make it usable without module dependencies.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: x_tables: add xt_{match,target} arguments to match/target functions
Patrick McHardy [Tue, 21 Mar 2006 02:02:56 +0000 (18:02 -0800)]
[NETFILTER]: x_tables: add xt_{match,target} arguments to match/target functions

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: x_tables: pass registered match/target data to match/target functions
Patrick McHardy [Tue, 21 Mar 2006 02:02:15 +0000 (18:02 -0800)]
[NETFILTER]: x_tables: pass registered match/target data to match/target functions

This allows to make decisions based on the revision (and address family
with a follow-up patch) at runtime.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Convert x_tables matches/targets to centralized error checking
Patrick McHardy [Tue, 21 Mar 2006 02:01:58 +0000 (18:01 -0800)]
[NETFILTER]: Convert x_tables matches/targets to centralized error checking

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Convert ip6_tables matches/targets to centralized error checking
Patrick McHardy [Tue, 21 Mar 2006 02:01:43 +0000 (18:01 -0800)]
[NETFILTER]: Convert ip6_tables matches/targets to centralized error checking

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Convert arp_tables targets to centralized error checking
Patrick McHardy [Tue, 21 Mar 2006 02:01:28 +0000 (18:01 -0800)]
[NETFILTER]: Convert arp_tables targets to centralized error checking

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Convert ip_tables matches/targets to centralized error checking
Patrick McHardy [Tue, 21 Mar 2006 02:01:14 +0000 (18:01 -0800)]
[NETFILTER]: Convert ip_tables matches/targets to centralized error checking

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Change {ip,ip6,arp}_tables to use centralized error checking
Patrick McHardy [Tue, 21 Mar 2006 02:00:36 +0000 (18:00 -0800)]
[NETFILTER]: Change {ip,ip6,arp}_tables to use centralized error checking

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: xt_tables: add centralized error checking
Patrick McHardy [Tue, 21 Mar 2006 01:59:06 +0000 (17:59 -0800)]
[NETFILTER]: xt_tables: add centralized error checking

Introduce new functions for common match/target checks (private data
size, valid hooks, valid tables and valid protocols) to get more consistent
error reporting and to avoid each module duplicating them.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: nf_conntrack: use ipv6_addr_equal in nf_ct_reasm
Yasuyuki Kozakai [Tue, 21 Mar 2006 01:58:44 +0000 (17:58 -0800)]
[NETFILTER]: nf_conntrack: use ipv6_addr_equal in nf_ct_reasm

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[NETFILTER]: Fix CID offset bug in PPTP NAT helper debug message
Holger Eitzenberger [Tue, 21 Mar 2006 01:58:21 +0000 (17:58 -0800)]
[NETFILTER]: Fix CID offset bug in PPTP NAT helper debug message

The recent (kernel 2.6.15.1) fix for PPTP NAT helper introduced a
bug - which only appears if DEBUGP is enabled though.

The calculation of the CID offset into a PPTP request struct is
not correct, so that at least not the correct CID is displayed
if DEBUGP is enabled.

This patch corrects CID offset calculation and introduces a #define
for that.

Signed-off-by: Holger Eitzenberger <heitzenberger@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] CCID2: Drop sock reference count on timer expiration and reset.
Andrea Bittau [Tue, 21 Mar 2006 01:57:52 +0000 (17:57 -0800)]
[DCCP] CCID2: Drop sock reference count on timer expiration and reset.

There was a hybrid use of standard timers and sk_timers.  This caused
the reference count of the sock to be incorrect when resetting the RTO
timer.  The sock reference count should now be correct, enabling its
destruction, and allowing the DCCP module to be unloaded.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
18 years ago[DCCP]: Set the default CCID according to kernel config selection
Ian McDonald [Tue, 21 Mar 2006 01:56:56 +0000 (17:56 -0800)]
[DCCP]: Set the default CCID according to kernel config selection

Now CCID2 is the default, as stated in the RFC drafts, but we allow
a config where just CCID3 is built, where CCID3 becomes the default.

Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
18 years ago[NETFILTER] nf_conntrack: clean up to reduce size of 'struct nf_conn'
Harald Welte [Tue, 21 Mar 2006 01:56:32 +0000 (17:56 -0800)]
[NETFILTER] nf_conntrack: clean up to reduce size of 'struct nf_conn'

This patch moves all helper related data fields of 'struct nf_conn'
into a separate structure 'struct nf_conn_help'.  This new structure
is only present in conntrack entries for which we actually have a
helper loaded.

Also, this patch cleans up the nf_conntrack 'features' mechanism to
resemble what the original idea was: Just glue the feature-specific
data structures at the end of 'struct nf_conn', and explicitly
re-calculate the pointer to it when needed rather than keeping
pointers around.

Saves 20 bytes per conntrack on my x86_64 box. A non-helped conntrack
is 276 bytes. We still need to save another 20 bytes in order to fit
into to target of 256bytes.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: include <linux/vmalloc.h>
Michael Chan [Tue, 21 Mar 2006 01:55:25 +0000 (17:55 -0800)]
[BNX2]: include <linux/vmalloc.h>

Include <linux/vmalloc.h> so that it compiles properly on all archs.

Update version to 1.4.38.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TCP]: MTU probing
John Heffner [Tue, 21 Mar 2006 01:53:41 +0000 (17:53 -0800)]
[TCP]: MTU probing

Implementation of packetization layer path mtu discovery for TCP, based on
the internet-draft currently found at
<http://www.ietf.org/internet-drafts/draft-ietf-pmtud-method-05.txt>.

Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: Update version
Michael Chan [Tue, 21 Mar 2006 01:50:08 +0000 (17:50 -0800)]
[BNX2]: Update version

Update version to 1.4.37.

Add missing flush_scheduled_work() in bnx2_suspend as noted by Jeff
Garzik.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: Support larger rx ring sizes (part 2)
Michael Chan [Tue, 21 Mar 2006 01:49:49 +0000 (17:49 -0800)]
[BNX2]: Support larger rx ring sizes (part 2)

Support bigger rx ring sizes (up to 1020) in the rx fast path.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: Support larger rx ring sizes (part 1)
Michael Chan [Tue, 21 Mar 2006 01:49:20 +0000 (17:49 -0800)]
[BNX2]: Support larger rx ring sizes (part 1)

Increase maximum receive ring size from 255 to 1020 by supporting
up to 4 linked pages of receive descriptors. To accomodate the
higher memory usage, each physical descriptor page is allocated
separately and the software ring that keeps track of the SKBs and the
DMA addresses is allocated using vmalloc.

Some of the receive-related fields in the bp structure are re-
organized a bit for better locality of reference.

The max. was reduced to 1020 from 4080 after discussion with David
Miller.

This patch contains ring init code changes only. This next patch
contains rx data path code changes.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: Fix bug when rx ring is full
Michael Chan [Tue, 21 Mar 2006 01:49:02 +0000 (17:49 -0800)]
[BNX2]: Fix bug when rx ring is full

Fix the rx code path that does not handle the full rx ring correctly.

When the rx ring is set to the max. size (i.e. 255), the consumer and
producer indices will be the same when completing an rx packet. Fix
the rx code to handle this condition properly.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: Add ethtool -d support
Michael Chan [Tue, 21 Mar 2006 01:48:46 +0000 (17:48 -0800)]
[BNX2]: Add ethtool -d support

Add ETHTOOL_GREGS support.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[BNX2]: Reduce register test size
Michael Chan [Tue, 21 Mar 2006 01:48:32 +0000 (17:48 -0800)]
[BNX2]: Reduce register test size

Eliminate some of the registers in ethtool register test to reduce
driver size.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Update version and reldate
Michael Chan [Tue, 21 Mar 2006 01:48:18 +0000 (17:48 -0800)]
[TG3]: Update version and reldate

Update version to 3.50.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Support shutdown WoL.
Michael Chan [Tue, 21 Mar 2006 01:48:03 +0000 (17:48 -0800)]
[TG3]: Support shutdown WoL.

Support WoL during shutdown by calling
tg3_set_power_state(tp, PCI_D3hot) during tg3_close().

Change the power state parameter to pci_power_t type and use
constants defined in pci.h.

Certain ethtool operations cannot be performed after tg3_close()
because the device will go to low power state. Add return -EAGAIN
in such cases where appropriate.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Enable TSO by default
Michael Chan [Tue, 21 Mar 2006 01:47:44 +0000 (17:47 -0800)]
[TG3]: Enable TSO by default

Enable TSO by default on newer chips that support TSO in hardware.
Leave TSO off by default on older chips that do firmware TSO because
performance is slightly lower.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[TG3]: Add support for 5714S and 5715S
Michael Chan [Tue, 21 Mar 2006 01:47:20 +0000 (17:47 -0800)]
[TG3]: Add support for 5714S and 5715S

Add support for 5714S and 5715S.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPV4] fib_rules.c: make struct fib_rules static again
Adrian Bunk [Tue, 21 Mar 2006 01:46:56 +0000 (17:46 -0800)]
[IPV4] fib_rules.c: make struct fib_rules static again

struct fib_rules became global for no good reason.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPCOMP6]: don't check vfree() argument for NULL.
Jesper Juhl [Tue, 21 Mar 2006 01:46:29 +0000 (17:46 -0800)]
[IPCOMP6]: don't check vfree() argument for NULL.

vfree does it's own NULL checking, so checking a pointer before
handing it to vfree is pointless.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Initial feature negotiation implementation
Andrea Bittau [Tue, 21 Mar 2006 01:43:56 +0000 (17:43 -0800)]
[DCCP]: Initial feature negotiation implementation

Still needs more work, but boots and doesn't crashes, even
does some negotiation!

18:38:52.174934  127.0.0.1.43458 > 127.0.0.1.5001: request <change_l ack_ratio 2, change_r ccid 2, change_l ccid 2>
18:38:52.218526  127.0.0.1.5001 > 127.0.0.1.43458: response <nop, nop, change_l ack_ratio 2, confirm_r ccid 2 2, confirm_l ccid 2 2, confirm_r ack_ratio 2>
18:38:52.185398  127.0.0.1.43458 > 127.0.0.1.5001: <nop, confirm_r ack_ratio 2, ack_vector0 0x00, elapsed_time 212>

:-)

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation
Andrea Bittau [Tue, 21 Mar 2006 01:41:47 +0000 (17:41 -0800)]
[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation

Original work by Andrea Bittau, Arnaldo Melo cleaned up and fixed several
issues on the merge process.

For now CCID2 was turned the default for all SOCK_DCCP connections, but this
will be remedied soon with the merge of the feature negotiation code.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] CCID3: Set the no_feedback_timer fields near init_timer
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 01:35:13 +0000 (17:35 -0800)]
[DCCP] CCID3: Set the no_feedback_timer fields near init_timer

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP]: Don't alloc ack vector for the control sock
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 01:34:53 +0000 (17:34 -0800)]
[DCCP]: Don't alloc ack vector for the control sock

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ackvec: Delete all the ack vector records in dccp_ackvec_free
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 01:20:46 +0000 (17:20 -0800)]
[DCCP] ackvec: Delete all the ack vector records in dccp_ackvec_free

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] CCID: Allow ccid_{init,exit} to be NULL
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 01:20:23 +0000 (17:20 -0800)]
[DCCP] CCID: Allow ccid_{init,exit} to be NULL

Testing if the ccid being instantiated has these methods in
ccid_init().

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[DCCP] ackvec: Introduce ack vector records
Andrea Bittau [Tue, 21 Mar 2006 01:19:55 +0000 (17:19 -0800)]
[DCCP] ackvec: Introduce ack vector records

Based on a patch by Andrea Bittau.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[LIST]: Introduce list_for_each_entry_from
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 01:19:17 +0000 (17:19 -0800)]
[LIST]: Introduce list_for_each_entry_from

For iterating over list of given type continuing from existing point.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[IPV4]: Use RCU locking in fib_rules.
Robert Olsson [Tue, 21 Mar 2006 01:18:53 +0000 (17:18 -0800)]
[IPV4]: Use RCU locking in fib_rules.

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[LIST]: Introduce list_for_each_entry_safe_from
Arnaldo Carvalho de Melo [Tue, 21 Mar 2006 01:18:05 +0000 (17:18 -0800)]
[LIST]: Introduce list_for_each_entry_safe_from

For iterate over list of given type from existing point safe against removal of
list entry.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>