David Chinner [Thu, 10 Apr 2008 02:21:32 +0000 (12:21 +1000)]
[XFS] Make xfs_alloc_compute_aligned() void.
xfs_alloc_compute_aligned() returns a value based on a comparison of the
computed extent length and the minimum length allowed. This is only used
by some callers - the other four return parameters are used more often.
Hence move the comparison to the code that actually needs to do it and
make xfs_alloc_compute_aligned() a void function.
David Chinner [Thu, 10 Apr 2008 02:21:25 +0000 (12:21 +1000)]
[XFS] Clean up xfs_alloc_search_busy() return values.
xfs_alloc_search_busy() returns an index into the busy array if the extent
was found in the array. This is never checked, and the
xfs_alloc_search_busy() does a log force to prevent reuse of the extent
before the free transaction hits the disk. Hence the return value is
useless. Declare the function void and remove the slot number from the
tracing as well.
David Chinner [Thu, 10 Apr 2008 02:21:18 +0000 (12:21 +1000)]
[XFS] Propagate errors from xfs_trans_commit().
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.
David Chinner [Thu, 10 Apr 2008 02:21:11 +0000 (12:21 +1000)]
[XFS] Propagate xfs_trans_reserve() errors.
xfs_trans_reserve() reports errors that should not be ignored. For
example, a shutdown filesystem will report errors through
xfs_trans_reserve() to prevent further changes from being attempted on a
damaged filesystem. Catch and propagate all error conditions from
xfs_trans_reserve().
David Chinner [Thu, 10 Apr 2008 02:20:45 +0000 (12:20 +1000)]
[XFS] Catch errors when turning off quotas.
When turning off quota, we need to write various transactions to the log
to ensure that they are cleanly removed in the case of a crash. We need to
check that the transactions hit the disk correctly. If we fail to write
the final quota off transaction, we are corrupt in memory and so the only
option is to shut the filesystem down at this point.
David Chinner [Thu, 10 Apr 2008 02:20:31 +0000 (12:20 +1000)]
[XFS] Clean up quotamount error handling.
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail
to mount quotas, we continue with quota's turned off, which is all handled
inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need
not be returned to the callers.
David Chinner [Thu, 10 Apr 2008 02:20:24 +0000 (12:20 +1000)]
[XFS] Check for dquot flush errors
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence
we never know if we've failed to flush a dquot to disk. Propagate the
error and warn to the syslog if a flush ever fails.
David Chinner [Thu, 10 Apr 2008 02:20:03 +0000 (12:20 +1000)]
[XFS] Report errors from xfs_reserve_blocks().
xfs_reserve_blocks() can fail in interesting ways. In neither case is it a
fatal error, but the result can lead to sub-optimal behaviour. Warn to the
syslog if the call fails but otherwise continue.
David Chinner [Thu, 10 Apr 2008 02:19:02 +0000 (12:19 +1000)]
[XFS] Fix lock inversion in forced shutdown.
Recent changes to xlog_state_release_iclog() placed the grant_lock inside
the icloglock. forced unmount of the log does this the opposite way
around, but does not depend on the order for correct working. Fix the
inversion by changing the order locks are gained in
xfs_log_force_umount().
David Chinner [Thu, 10 Apr 2008 02:18:54 +0000 (12:18 +1000)]
[XFS] Reorganise xlog_t for better cacheline isolation of contention
To reduce contention on the log in large CPU count, separate out different
parts of the xlog_t structure onto different cachelines. Move each lock
onto a different cacheline along with all the members that are
accessed/modified while that lock is held.
David Chinner [Thu, 10 Apr 2008 02:18:46 +0000 (12:18 +1000)]
[XFS] Remove the xlog_ticket allocator
The ticket allocator is just a simple slab implementation internal to the
log. It requires the icloglock to be held when manipulating it and this
contributes to contention on that lock.
Just kill the entire allocator and use a memory zone instead. While there,
allow us to gracefully fail allocation with ENOMEM.
David Chinner [Thu, 10 Apr 2008 02:18:39 +0000 (12:18 +1000)]
[XFS] Per iclog callback chain lock
Rather than use the icloglock for protecting the iclog completion callback
chain, use a new per-iclog lock so that walking the callback chain doesn't
require holding a global lock.
This reduces contention on the icloglock during transaction commit and log
I/O completion by reducing the number of times we need to hold the global
icloglock during these operations.
While investigating the extent corruption bug I ran into this bug in debug
only code. xfs_bmap_check_leaf_extents() loops through the leaf blocks of
the extent btree checking that every extent is entirely before the next
extent. It also compares the last extent in the previous block to the
first extent in the current block when the previous block has been
released and potentially unmapped. So take a copy of the last extent
instead of a pointer. Also move the last extent check out of the loop
because we only need to do it once.
Most VN_RELE calls either directly contain a XFS_ITOV or have the
corresponding xfs_inode already in scope. Use the IRELE helper instead of
VN_RELE to clarify the code. With a little more work we can kill VN_RELE
altogether and define IRELE in terms of iput directly.
[XFS] cleanup root inode handling in xfs_fs_fill_super
- rename rootvp to root for clarify
- remove useless vn_to_inode call
- check is_bad_inode before calling d_alloc_root
- use iput instead of VN_RELE in the error case
David Chinner [Thu, 27 Mar 2008 07:00:45 +0000 (18:00 +1100)]
[XFS] Ensure a btree insert returns a valid cursor.
When writing into preallocated regions there is a case where XFS can oops
or hang doing the unwritten extent conversion on I/O completion. It turns
out that the problem is related to the btree cursor being invalid.
When we do an insert into the tree, we may need to split blocks in the
tree. When we only split at the leaf level (i.e. level 0), everything
works just fine. However, if we have a multi-level split in the btreee,
the cursor passed to the insert function is no longer valid once the
insert is complete.
The leaf level split is handled correctly because all the operations at
level 0 are done using the original cursor, hence it is updated correctly.
However, when we need to update the next level up the tree, we don't use
that cursor - we use a cloned cursor that points to the index in the next
level up where we need to do the insert.
Hence if we need to split a second level, the changes to the tree are
reflected in the cloned cursor and not the original cursor. This
clone-and-move-up-a-level-on-split behaviour recurses all the way to the
top of the tree.
The complexity here is that these cloned cursors do not point to the
original index that was inserted - they point to the newly allocated block
(the right block) and the original cursor pointer to that level may still
point to the left block. Hence, without deep examination of the cloned
cursor and buffers, we cannot update the original cursor with the new path
from the cloned cursor.
In these cases the original cursor could be pointing to the wrong block(s)
and hence a subsequent modification to the tree using that cursor will
lead to corruption of the tree.
The crash case occurs when the tree changes height - we insert a new level
in the tree, and the cursor does not have a buffer in it's path for that
level. Hence any attempt to walk back up the cursor to the root block will
result in a null pointer dereference.
To make matters even more complex, the BMAP BT is rooted in an inode, so
we can have a change of height in the btree *without a root split*. That
is, if the root block in the inode is full when we split a leaf node, we
cannot fit the pointer to the new block in the root, so we allocate a new
block, migrate all the ptrs out of the inode into the new block and point
the inode root block at the newly allocated block. This changes the height
of the tree without a root split having occurred and hence invalidates the
path in the original cursor.
The patch below prevents xfs_bmbt_insert() from returning with an invalid
cursor by detecting the cases that invalidate the original cursor and
refresh it by do a lookup into the btree for the original index we were
inserting at.
Note that the INOBT, AGFBNO and AGFCNT btree implementations also have
this bug, but the cursor is currently always destroyed or revalidated
after an insert for those trees. Hence this patch only address the problem
in the BMBT code.
David Chinner [Thu, 27 Mar 2008 07:00:38 +0000 (18:00 +1100)]
[XFS] Account for inode cluster alignment in all allocations
At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty
transaction in xfs_mkdir or xfs_create. This is due to the initial
allocation attempt not taking into account inode alignment and hence we
can prepare the AGF freelist for allocation when it's not actually
possible to do an allocation. This results in inode allocation returning
ENOSPC with a dirty transaction, and hence we shut down the filesystem.
Because the first allocation is an exact allocation attempt, we must tell
the allocator that the alignment does not affect the allocation attempt.
i.e. we will accept any extent alignment as long as the extent starts at
the block we want. Unfortunately, this means that if the longest free
extent is less than the length + alignment necessary for fallback
allocation attempts but is long enough to attempt a non-aligned
allocation, we will modify the free list.
If we then have the exact allocation fail, all other allocation attempts
will also fail due to the alignment constraint being taken into account.
Hence the initial attempt needs to set the "alignment slop" field so that
alignment, while not required, must be taken into account when determining
if there is enough space left in the AG to do the allocation.
That means if the exact allocation fails, we will not dirty the freelist
if there is not enough space available fo a subsequent allocation to
succeed. Hence we get an ENOSPC error back to userspace without shutting
down the filesystem.
[XFS] Replace custom AIL linked-list code with struct list_head
Replace the xfs_ail_entry_t with a struct list_head and clean the
surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail()
by terminating the loop at the head of the list correctly.
[XFS] Remove superflous xfs_readsb call in xfs_mountfs.
When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines
above unconditionally, so there is no need to try to read the superblock
if it's not present. If any other port doesn't have the superblock read at
this point it should just call it directly from it's xfs_mount equivalent.
Niv Sardi [Thu, 6 Mar 2008 02:49:26 +0000 (13:49 +1100)]
[XFS] kill t_sema member of struct xfs_trans
It's completely unused so we might aswell kill it. Note that there is
another t_sema in struct xlog_ticket, which is used and actually an sv_t
despite the name. That one is left untouched by this patch.
David Chinner [Thu, 6 Mar 2008 02:45:43 +0000 (13:45 +1100)]
[XFS] Use power-of-2 sized buffers to reduce overhead
Now that the ktrace_enter() code is using atomics, the non-power-of-2
buffer sizes - which require modulus operations to get the index - are
showing up as using substantial CPU in the profiles.
Force the buffer sizes to be rounded up to the nearest power of two and
use masking rather than modulus operations to convert the index counter to
the buffer index. This reduces ktrace_enter overhead to 8% of a CPU time,
and again almost halves the trace intensive test runtime.
David Chinner [Thu, 6 Mar 2008 02:45:35 +0000 (13:45 +1100)]
[XFS] Use atomic counters for ktrace buffer indexes
ktrace_enter() is consuming vast amounts of CPU time due to the use of a
single global lock for protecting buffer index increments. Change it to
use per-buffer atomic counters - this reduces ktrace_enter() overhead
during a trace intensive test on a 4p machine from 58% of all CPU time to
12% and halves test runtime.
David Chinner [Thu, 6 Mar 2008 02:45:29 +0000 (13:45 +1100)]
[XFS] Update c/mtime correctly on truncates
XFS changes the c/mtime of an inode when truncating it to the same size.
The c/mtime is only supposed to change if the size is changed. Not to be
confused with ftruncate, where the c/mtime is supposed to be changed even
if the size is not changed.
The Linux VFS encodes this semantic difference in the flags it sends down
to ->setattr, which XFS currently ignores. We need to make XFS pay
attention to the VFS flags and hence Do The Right Thing.
[XFS] don't encode parent in nfs filehandles unless nessecary
As Dave pointed out after the export ops changes we now always encode the
parent into the filehandle for regular files, but it's not actually needed
when the filesystem is export with no_subtree_check. This one-liner fixes
xfs_fs_encode_fh to skip encoding the parent unless nessecary.
Instead of of xfs_get_dir_entry use a macro to get the xfs_inode from the
dentry in the callers and grab the reference manually.
Only grab the reference once as it's fine to keep it over the dmapi calls.
(And even that reference is actually superflous in Linux but I'll leave
that for another patch)
- use proper goto based unwinding instead of the current mess of
multiple conditionals
- rename ip to inode because that's the normal convention for Linux
inodes while ip is the convention for xfs_inodes
- remove unlikely checks for the default_acl - branches marked unlikely
might lead to extreme branch bredictor slowdons if taken and for some
workloads a default acl is quite common
- properly indent the switch statements
- remove xfs_has_fs_struct as nfsd has a fs_struct in any semi-recent
kernel
David Chinner [Thu, 6 Mar 2008 02:44:14 +0000 (13:44 +1100)]
[XFS] Use atomics for iclog reference counting
Now that we update the log tail LSN less frequently on transaction
completion, we pass the contention straight to the global log state lock
(l_iclog_lock) during transaction completion.
We currently have to take this lock to decrement the iclog reference
count. there is a reference count on each iclog, so we need to take þhe
global lock for all refcount changes.
When large numbers of processes are all doing small trnasctions, the iclog
reference counts will be quite high, and the state change that absolutely
requires the l_iclog_lock is the except rather than the norm.
Change the reference counting on the iclogs to use atomic_inc/dec so that
we can use atomic_dec_and_lock during transaction completion and avoid the
need for grabbing the l_iclog_lock for every reference count decrement
except the one that matters - the last.
David Chinner [Thu, 6 Mar 2008 02:44:06 +0000 (13:44 +1100)]
[XFS] Prevent AIL lock contention during transaction completion
When hundreds of processors attempt to commit transactions at the same
time, they can contend on the AIL lock when updating the tail LSN held in
the in-core log structure.
At the moment, the tail LSN is only needed when actually writing out an
iclog, so it really does not need to be updated on every single
transaction completion - only those that result in switching iclogs and
flushing them to disk.
The result is that we reduce the number of times we need to grab the AIL
lock and the log grant lock by up to two orders of magnitude on large
processor count machines. The problem has previously been hidden by AIL
lock contention walking the AIL list which was recently solved and
uncovered this issue.
David Chinner [Thu, 6 Mar 2008 02:43:49 +0000 (13:43 +1100)]
[XFS] Remove the xfs_icluster structure
Remove the xfs_icluster structure and replace with a radix tree lookup.
We don't need to keep a list of inodes in each cluster around anymore as
we can look them up quickly when we need to. The only time we need to do
this now is during inode writeback.
Factor the inode cluster writeback code out of xfs_iflush and convert it
to use radix_tree_gang_lookup() instead of walking a list of inodes built
when we first read in the inodes.
This remove 3 pointers from each xfs_inode structure and the xfs_icluster
structure per inode cluster. Hence we reduce the cache footprint of the
xfs_inodes by between 5-10% depending on cluster sparseness.
To be truly efficient we need a radix_tree_gang_lookup_range() call to
stop searching once we are past the end of the cluster instead of trying
to find a full cluster's worth of inodes.
David Chinner [Thu, 6 Mar 2008 02:43:42 +0000 (13:43 +1100)]
[XFS] Don't block pdflush when writing back inodes
When pdflush is writing back inodes, it can get stuck on inode cluster
buffers that are currently under I/O. This occurs when we write data to
multiple inodes in the same inode cluster at the same time.
Effectively, delayed allocation marks the inode dirty during the data
writeback. Hence if the inode cluster was flushed during the writeback of
the first inode, the writeback of the second inode will block waiting for
the inode cluster write to complete before writing it again for the newly
dirtied inode.
Basically, we want to avoid this from happening so we don't block pdflush
and slow down all of writeback. Hence we introduce a non-blocking async
inode flush flag that pdflush uses. If this flag is set, we use
non-blocking operations (e.g. try locks) whereever we can to avoid
blocking or extra I/O being issued.
David Chinner [Thu, 6 Mar 2008 02:43:34 +0000 (13:43 +1100)]
[XFS] Factor xfs_itobp() and xfs_inotobp().
The only difference between the functions is one passes an inode for the
lookup, the other passes an inode number. However, they don't do the same
validity checking or set all the same state on the buffer that is returned
yet they should.
Factor the functions into a common implementation.
Lachlan McIlroy [Thu, 6 Mar 2008 02:43:11 +0000 (13:43 +1100)]
[XFS] make inode reclaim synchronise with xfs_iflush_done()
On a forced shutdown, xfs_finish_reclaim() will skip flushing the inode.
If the inode flush lock is not already held and there is an outstanding
xfs_iflush_done() then we might free the inode prematurely. By acquiring
and releasing the flush lock we will synchronise with xfs_iflush_done().
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
it821x: do not describe noraid parameter with its value
Pb1200/DBAu1200: fix bad IDE resource size
Au1200: IDE driver build fix
Au1200: kill IDE driver function prototypes
avr32 mustn't select HAVE_IDE
Sergei Shtylyov [Wed, 16 Apr 2008 23:14:33 +0000 (01:14 +0200)]
Pb1200/DBAu1200: fix bad IDE resource size
The header files for the Pb1200/DBAu1200 boards have wrong definition for the
IDE interface's decoded range length -- it should be 512 bytes according to
what the IDE driver does. In addition, the IDE platform device claims 1 byte
too many for its memory resource -- fix the platform code and the IDE driver
in accordance.
Sergei Shtylyov [Wed, 16 Apr 2008 23:14:33 +0000 (01:14 +0200)]
Au1200: IDE driver build fix
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled:
drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable':
drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function
`sg_virt'
drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function
`sg_next'
drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from
integer without a cast
Fix this by including <linux/scatterlist.h>. While at it, remove the #include's
without which the driver happily builds.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sergei Shtylyov [Wed, 16 Apr 2008 23:14:33 +0000 (01:14 +0200)]
Au1200: kill IDE driver function prototypes
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c:
include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared
`static' but never defined
include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared
`static' but never defined
by wiping out the whole "function prototyping" section from the header file
<asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are
already dead in the IDE driver; move the only useful prototype into the driver.
Adrian Bunk [Wed, 16 Apr 2008 23:14:32 +0000 (01:14 +0200)]
avr32 mustn't select HAVE_IDE
There's a libata based PATA driver for avr32, but no support for
drivers/ide/ on avr32.
This patch fixes the following compile error:
<-- snip -->
...
CC [M] drivers/ide/ide-cd.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory
make[3]: *** [drivers/ide/ide-cd.o] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: remove broken usb-serial num_endpoints check
USB: option: Add new vendor ID and device ID for AMOI HSDPA modem
USB: support more Huawei data card product IDs
USB: option.c: add more device IDs
USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
[TCP]: Add return value indication to tcp_prune_ofo_queue().
PS3: gelic: fix the oops on the broken IE returned from the hypervisor
b43legacy: fix DMA mapping leakage
mac80211: remove message on receiving unexpected unencrypted frames
Update rt2x00 MAINTAINERS entry
Add rfkill to MAINTAINERS file
rfkill: Fix device type check when toggling states
b43legacy: Fix usage of struct device used for DMAing
ssb: Fix usage of struct device used for DMAing
MAINTAINERS: move to generic repository for iwlwifi
b43legacy: fix initvals loading on bcm4303
rtl8187: Add missing priv->vif assignments
netconsole: only set CON_PRINTBUFFER if the user specifies a netconsole
[CAN]: Update documentation of struct sockaddr_can
MAINTAINERS: isdn4linux@listserv.isdn4linux.de is subscribers-only
[TCP]: Fix never pruned tcp out-of-order queue.
[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
The num_interrupt_in, num_bulk_in, and other checks in the usb-serial
code are just wrong, there are too many different devices out there with
different numbers of endpoints. We need to just be sticking with the
device ids instead of trying to catch this kind of thing. It broke too
many different devices.
This fixes a large number of usb-serial devices to get them working
properly again.
- declare the unusal device for Huawei data card devices in
unusual_devs.h
- disable the product ID matching for Huawei data card devices in
usb_match_device function of driver.c
- declare the product IDs in option.c.
James Cameron [Wed, 9 Apr 2008 08:59:13 +0000 (18:59 +1000)]
USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
The modem was detected, the ttyUSB{0,1,2} appeared, a call could be
made, and the expected data rate was achieved. Tested for an hour or
two, total of 100Mb. I shall do more testing.
Signed-off-by: James Cameron <quozl@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Helt [Tue, 15 Apr 2008 21:34:47 +0000 (14:34 -0700)]
acpi thermal trip points increased to 12
The THERMAL_MAX_TRIPS value is set to 10. It is too few for the Compaq AP550
machine which has 12 trip points.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Tue, 15 Apr 2008 21:34:46 +0000 (14:34 -0700)]
spi: spi_s3c24xx must initialize num_chipselect
The SPI core now expects num_chipselect to be set correctly as due to added
checks on the chip being selected before an transfer is allowed. This patch
adds a num_cs field to the platform data which needs to be set correctly
before adding the SPI platform device.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Tue, 15 Apr 2008 21:34:44 +0000 (14:34 -0700)]
spi: spi_s3c24xx driver must init completion
The s3c24xx_spi_txrx() function should initialise the completion each time
before using it, otherwise we end up with the possibility of returning success
before the interrupt handler has processed all the data.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Tue, 15 Apr 2008 21:34:43 +0000 (14:34 -0700)]
vfs: fix possible deadlock in ext2, ext3, ext4 when using xattrs
mb_cache_entry_alloc() was allocating cache entries with GFP_KERNEL. But
filesystems are calling this function while holding xattr_sem so possible
recursion into the fs violates locking ordering of xattr_sem and transaction
start / i_mutex for ext2-4. Change mb_cache_entry_alloc() so that filesystems
can specify desired gfp mask and use GFP_NOFS from all of them.
Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Dave Jones <davej@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation: correct overcommit caveat in hugetlbpage.txt
As shown by Gurudas Pai recently, we can put hugepages into the surplus
state (by echo 0 > /proc/sys/vm/nr_hugepages), even when
/proc/sys/vm/nr_overcommit_hugepages is 0. This is actually correct, to
allow the original goal (shrink the static pool to 0) to succeed (we are
converting hugepages to surplus because they are in use). However, the
documentation does not accurately reflect this case. Update it.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
add "Isolate" migratetype name to /proc/pagetypeinfo
In a5d76b54a3f3a40385d7f76069a2feac9f1bad63 (memory unplug: page isolation by
KAMEZAWA Hiroyuki), "isolate" migratetype added. but unfortunately, it
doesn't treat /proc/pagetypeinfo display logic.
this patch add "Isolate" to pagetype name field.
/proc/pagetype
before:
------------------------------------------------------------------------------------------------------------------------
Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
Node 0, zone DMA, type Unmovable 1 2 2 2 1 2 2 1 1 0 0
Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA, type Movable 2 3 3 1 3 3 2 0 0 0 0
Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 0 1
Node 0, zone DMA, type <NULL> 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type Unmovable 1 9 7 4 1 1 1 1 0 0 0
Node 0, zone Normal, type Reclaimable 5 2 0 0 1 1 0 0 0 1 0
Node 0, zone Normal, type Movable 0 1 1 0 0 0 1 0 0 1 60
Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1
Node 0, zone Normal, type <NULL> 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone HighMem, type Unmovable 0 0 1 1 1 0 1 1 2 2 0
Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone HighMem, type Movable 236 62 6 2 2 1 1 0 1 1 16
Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1
Node 0, zone HighMem, type <NULL> 0 0 0 0 0 0 0 0 0 0 0
Number of blocks type Unmovable Reclaimable Movable Reserve <NULL>
Node 0, zone DMA 1 0 2 1 0
Node 0, zone Normal 10 40 169 1 0
Node 0, zone HighMem 2 0 283 1 0
after:
------------------------------------------------------------------------------------------------------------------------
Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
Node 0, zone DMA, type Unmovable 1 2 2 2 1 2 2 1 1 0 0
Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA, type Movable 2 3 3 1 3 3 2 0 0 0 0
Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 0 1
Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type Unmovable 0 2 1 1 0 1 0 0 0 0 0
Node 0, zone Normal, type Reclaimable 1 1 1 1 1 0 1 1 1 0 0
Node 0, zone Normal, type Movable 0 1 1 1 0 1 0 1 0 0 196
Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1
Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone HighMem, type Unmovable 0 1 0 0 0 1 1 1 2 2 0
Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone HighMem, type Movable 1 0 1 1 0 0 0 0 1 0 200
Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1
Node 0, zone HighMem, type Isolate 0 0 0 0 0 0 0 0 0 0 0
Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
Node 0, zone DMA 1 0 2 1 0
Node 0, zone Normal 8 4 207 1 0
Node 0, zone HighMem 2 0 283 1 0
Dmitri Vorobiev [Tue, 15 Apr 2008 21:34:40 +0000 (14:34 -0700)]
Fix typos in Documentation/filesystems/seq_file.txt
A couple of typos crept into the newly added document about the seq_file
interface. This patch corrects those typos and simultaneously deletes
unnecessary trailing spaces.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Tue, 15 Apr 2008 21:34:38 +0000 (14:34 -0700)]
uml: compile error fix
This patch fixes this error:
In file included from /home/wangcong/projects/linux-2.6/arch/um/kernel/smp.c:9:
include2/asm/tlb.h: In function `tlb_remove_page':
include2/asm/tlb.h:101: error: implicit declaration of function `page_cache_release'
And since including <linux/pagemap.h> in <linux/swap.h> will break sparc,
we add this #include in uml's own header.
Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Tue, 15 Apr 2008 21:34:37 +0000 (14:34 -0700)]
memcg: fix oops in oom handling
When I used a test program to fork mass processes and immediately move them to
a cgroup where the memory limit is low enough to trigger oom kill, I got oops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000808
IP: [<ffffffff8045c47f>] _spin_lock_irqsave+0x8/0x18
PGD 4c95f067 PUD 4406c067 PMD 0
Oops: 0002 [1] SMP
CPU 2
Modules linked in:
Kay Sievers [Tue, 15 Apr 2008 21:34:35 +0000 (14:34 -0700)]
serial: fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial
platform drivers, to re-enable auto loading.
NOTE that Kconfig for some of these drivers doesn't allow modular builds, and
thus doesn't match the driver source's unload support. Presumably their
unload code is buggy and/or weakly tested...
[dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kay Sievers [Tue, 15 Apr 2008 21:34:34 +0000 (14:34 -0700)]
pcmcia: fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable PCMCIA
platform drivers, to re-enable auto loading.
[dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kay Sievers [Tue, 15 Apr 2008 21:34:33 +0000 (14:34 -0700)]
misc: fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable 'misc'
platform drivers, to re-enable auto loading.
[dbrownell@users.sourceforge.net: bugfix, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kay Sievers [Tue, 15 Apr 2008 21:34:30 +0000 (14:34 -0700)]
leds: fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable platform LED drivers, to re-enable auto loading.
[dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc: fix the error in the function of cmos_set_alarm
There is a bug in the function of cmos_set_alarm. RTC alarm time for October
can't be set correctly.
For October: 0x0A will be written into the RTC region (MONTH_ALARM) in current
kernel. But in fact 0x10 should be written. Wildcards are also not handled
correctly.
Kay Sievers [Tue, 15 Apr 2008 21:34:28 +0000 (14:34 -0700)]
mmc: fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable MMC host
platform drivers, to re-enable auto loading.
Also, add missing owner declarations in driver init.
[dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix memory corruption and crash on 32-bit x86 systems.
If a !PAE x86 kernel is booted on a 32-bit system with more than 4GB of
RAM, then we call memory_present() with a start/end that goes outside
the scope of MAX_PHYSMEM_BITS.
That causes this loop to happily walk over the limit of the sparse
memory section map:
for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) {
unsigned long section = pfn_to_section_nr(pfn);
struct mem_section *ms;
ms = __nr_to_section(section);
if (!ms->section_mem_map)
ms->section_mem_map = sparse_encode_early_nid(nid) |
SECTION_MARKED_PRESENT;
'ms' will be out of bounds and we'll corrupt a small amount of memory by
encoding the node ID and writing SECTION_MARKED_PRESENT (==0x1) over it.
The corruption might happen when encoding a non-zero node ID, or due to
the SECTION_MARKED_PRESENT which is 0x1:
mmzone.h:#define SECTION_MARKED_PRESENT (1UL<<0)
The fix is to sanity check anything the architecture passes to
sparsemem.
This bug seems to be rather old (as old as sparsemem support itself),
but the exact incarnation depended on random details like configs, which
made this bug more prominent in v2.6.25-to-be.
An additional enhancement might be to print a warning about ignored or
trimmed memory ranges.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <Yinghai.Lu@sun.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The signal trampolines were accidently flushing the kernel I$ instead of
the users. Fix that up, and also add a missing user D$ flush while
we're at it.
Fix locking bug in "acquire_console_semaphore_for_printk()"
When I cleaned up printk() and split up the printk locking logic in
commit 266c2e0abeca649fa6667a1a427ad1da507c6375 ("Make printk() console
semaphore accesses sensible") I had incorrectly moved the call to
have_callable_console() outside of the console semaphore.
That was buggy. The console semaphore protects the console_drivers list
that is used by have_callable_console().
Thanks go to Bongani Hlope who saw this as a hang on shutdown and reboot
and bisected the bug to the right commit, and tested this patch. See
PS3: gelic: fix the oops on the broken IE returned from the hypervisor
This fixes the bug that the driver would try to over-scan the memory
if the sum of the length field of every IEs does not match the length
returned from the hypervisor.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
projects / linux-2.6 / log