]> err.no Git - linux-2.6/log
linux-2.6
16 years agopowerpc: Make create_branch() return errors if the branch target is too large
Michael Ellerman [Tue, 24 Jun 2008 01:32:24 +0000 (11:32 +1000)]
powerpc: Make create_branch() return errors if the branch target is too large

If you pass a target value to create_branch() which is more than 32MB - 4,
or - 32MB away from the branch site, then it's impossible to create an
immediate branch.  The current code doesn't check, which will lead to us
creating a branch to somewhere else - which is bad.

For code that cares to check we return 0, which is easy to check for, and
for code that doesn't at least we'll be creating an illegal instruction,
rather than a branch to some random address.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Allow create_branch() to return errors
Michael Ellerman [Tue, 24 Jun 2008 01:32:22 +0000 (11:32 +1000)]
powerpc: Allow create_branch() to return errors

Currently create_branch() creates a branch instruction for you, and
patches it into the call site.  In some circumstances it would be nice
to be able to create the instruction and patch it later, and also some
code might want to check for errors in the branch creation before
doing the patching.  A future commit will change create_branch() to
check for errors.

For callers that don't care, replace create_branch() with
patch_branch(), which just creates the branch and patches it directly.

While we're touching all the callers, change to using unsigned int *,
as this seems to match usage better.  That allows (and requires) us to
remove the volatile in the definition of vector in powermac/smp.c and
mpc86xx_smp.c, that's correct because now that we're passing vector as
an unsigned int * the compiler knows that it's value might change
across the patch_branch() call.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Move code patching code into arch/powerpc/lib/code-patching.c
Michael Ellerman [Tue, 24 Jun 2008 01:32:21 +0000 (11:32 +1000)]
powerpc: Move code patching code into arch/powerpc/lib/code-patching.c

We currently have a few routines for patching code in asm/system.h, because
they didn't fit anywhere else. I'd like to clean them up a little and add
some more, so first move them into a dedicated C file - they don't need to
be inlined.

While we're moving the code, drop create_function_call(), it's intended
caller never got merged and will be replaced in future with something
different.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agodrivers/macintosh/smu.c: Improve error handling
Julia Lawall [Mon, 23 Jun 2008 18:14:52 +0000 (04:14 +1000)]
drivers/macintosh/smu.c: Improve error handling

This makes two changes:

* As noted by Akinobu Mita in patch
b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem never returns NULL
and always returns a zeroed region of memory.  Thus the error checking code
and memset after the call to alloc_bootmem are not necessary.

* The old error handling code consisted of setting a global variable to
NULL and returning an error code, which could cause previously allocated
resources never to be freed.  The patch adds calls to appropriate resource
deallocation functions.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: asm/elf.h: Reduce userspace header
Adrian Bunk [Mon, 23 Jun 2008 17:48:28 +0000 (03:48 +1000)]
powerpc: asm/elf.h: Reduce userspace header

This makes asm/elf.h export less non-userspace stuff to userspace.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Don't export asm/asm-compat.h to userspace
Adrian Bunk [Mon, 23 Jun 2008 17:48:21 +0000 (03:48 +1000)]
powerpc: Don't export asm/asm-compat.h to userspace

asm/asm-compat.h doesn't seem to be intended for userspace usage.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agodrivers/macintosh: Various cleanups
Adrian Bunk [Mon, 23 Jun 2008 17:46:57 +0000 (03:46 +1000)]
drivers/macintosh: Various cleanups

This contains the following cleanups:
- make the following needlessly global code static:
  - adb.c: adb_controller
  - adb.c: adb_init()
  - adbhid.c: adb_to_linux_keycodes[]  (also make it const)
  - via-pmu68k.c: backlight_level
  - via-pmu68k.c: backlight_enabled
- remove the following unused code:
  - via-pmu68k.c: sleep_notifier_list

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Move common module code into its own file
Kumar Gala [Fri, 20 Jun 2008 16:31:01 +0000 (02:31 +1000)]
powerpc: Move common module code into its own file

Refactor common code between ppc32 and ppc64 module handling into a
shared filed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: hash_huge_page() should get the WIMG bits from the lpte
Dave Kleikamp [Wed, 18 Jun 2008 22:32:56 +0000 (08:32 +1000)]
powerpc: hash_huge_page() should get the WIMG bits from the lpte

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Tell firmware we support architecture V2.06
Joel Schopp [Wed, 18 Jun 2008 20:23:23 +0000 (06:23 +1000)]
powerpc: Tell firmware we support architecture V2.06

Add the bits to the architecture-vec so that ibm,client-architecture
lets the firmware know we support the 2.06 architecture.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Add cputable entry for Power7 architected mode
Joel Schopp [Wed, 18 Jun 2008 20:18:21 +0000 (06:18 +1000)]
powerpc: Add cputable entry for Power7 architected mode

Add an entry for Power7 architected mode and add "(raw)" to Power7 raw
mode to distinguish it more clearly.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Only demote individual slices rather than whole process
Paul Mackerras [Wed, 18 Jun 2008 05:29:12 +0000 (15:29 +1000)]
powerpc: Only demote individual slices rather than whole process

At present, if we have a kernel with a 64kB page size, and some
process maps something that has to be mapped with 4kB pages (such as a
cache-inhibited mapping on POWER5+, or the eHCA infiniband queue-pair
pages), we change the process to use 4kB pages everywhere.  This hurts
the performance of HPC programs that access eHCA from userspace.

With this patch, the kernel will only demote the slice(s) containing
the eHCA or cache-inhibited mappings, leaving the remaining slices
able to use 64kB hardware pages.

This also changes the slice_get_unmapped_area code so that it is
willing to place a 64k-page mapping into (or across) a 4k-page slice
if there is no better alternative, i.e. if the program specified
MAP_FIXED or if there is not sufficient space available in slices that
are either empty or already have 64k-page mappings in them.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
16 years agopowerpc: Add cputable entry for POWER7
Michael Neuling [Wed, 18 Jun 2008 00:47:26 +0000 (10:47 +1000)]
powerpc: Add cputable entry for POWER7

Add a cputable entry for the POWER7 processor.

Also tell firmware that we know about POWER7.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Fix copy-and-paste error in clrsetbits_le16
Scott Wood [Tue, 17 Jun 2008 16:59:59 +0000 (02:59 +1000)]
powerpc: Fix copy-and-paste error in clrsetbits_le16

This was pointed out by Detlev Zundel when this code was being
added to U-boot.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Get rid of bitfields in ppc_bat struct
Becky Bruce [Fri, 13 Jun 2008 23:41:43 +0000 (09:41 +1000)]
powerpc: Get rid of bitfields in ppc_bat struct

While working on the 36-bit physical support, I noticed that there
was exactly one line of code that actually referenced the bitfields.
So I got rid of them and redefined ppc_bat as a struct of 2 u32's:
batu and batl.  I also got rid of the previous union that held the
bitfield structs and a word representation of the batu/l values.

This seems like a nicer solution than adding in a bunch of
new bitfields to support extended bat addressing that would never
get used, and just leaving the struct as-is would have been
incomplete in the face of large physical addressing.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Change BAT code to use phys_addr_t
Becky Bruce [Fri, 13 Jun 2008 23:41:42 +0000 (09:41 +1000)]
powerpc: Change BAT code to use phys_addr_t

Currently, the physical address is an unsigned long, but it should
be phys_addr_t in set_bat, [v/p]_mapped_by_bat.  Also, create a
macro that can convert a large physical address into the correct
format for programming the BAT registers.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Silly spelling fix in pgtable-ppc32
Becky Bruce [Fri, 13 Jun 2008 23:12:44 +0000 (09:12 +1000)]
powerpc: Silly spelling fix in pgtable-ppc32

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Increase CRASH_HANDLER_MAX
Arnd Bergmann [Thu, 12 Jun 2008 09:34:39 +0000 (19:34 +1000)]
powerpc: Increase CRASH_HANDLER_MAX

There are now two potential callers of machine_crash_shutdown,
so increase the limit accordingly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/cell: Disable ptcal in case of crash kdump
Arnd Bergmann [Thu, 12 Jun 2008 09:14:36 +0000 (19:14 +1000)]
powerpc/cell: Disable ptcal in case of crash kdump

We need to disable ptcal before starting a new kernel after a crash,
in order to avoid overwriting data in the kdump kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pseries: Call pseries_kexec_setup only on pseries
Arnd Bergmann [Thu, 12 Jun 2008 09:14:35 +0000 (19:14 +1000)]
powerpc/pseries: Call pseries_kexec_setup only on pseries

The pseries_kexec_setup function overwrites some ppc_md
pointers, so make sure it only gets called when running on
the right architecture.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Provide dummy crash_shutdown_register
Arnd Bergmann [Thu, 12 Jun 2008 09:14:34 +0000 (19:14 +1000)]
powerpc: Provide dummy crash_shutdown_register

When kexec is disabled, the crash_shutdown_{un,}register
functions are not available in the kernel.
This provides dummy inline functions for those so that
the callers don't have to worry about it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Free a PTE bit on ppc64 with 64K pages
Benjamin Herrenschmidt [Wed, 11 Jun 2008 05:37:10 +0000 (15:37 +1000)]
powerpc: Free a PTE bit on ppc64 with 64K pages

This frees a PTE bit when using 64K pages on ppc64.  This is done
by getting rid of the separate _PAGE_HASHPTE bit.  Instead, we just test
if any of the 16 sub-page bits is set.  For non-combo pages (ie. real
64K pages), we set SUB0 and the location encoding in that field.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Implement OF PCI address accessors stubs for CONFIG_PCI=n
Anton Vorontsov [Tue, 10 Jun 2008 22:31:00 +0000 (08:31 +1000)]
powerpc: Implement OF PCI address accessors stubs for CONFIG_PCI=n

To avoid "#ifdef CONFIG_PCI" in the drivers we should provide stubs in
place of OF PCI address accessors.

Without these stubs build breaks for drivers not strictly requiring PCI,
for example CONFIG_FB_OF=y without CONFIG_PCI:

  LD      .tmp_vmlinux1
drivers/built-in.o: In function `offb_map_reg':
offb.c:(.text+0x6e7c): undefined reference to `of_get_pci_address'

OF PCI IRQ accessors require pci_dev argument, so drivers using PCI
IRQs should depend on CONFIG_PCI anyway.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agomacintosh/media bay: Convert semaphore to mutex
Daniel Walker [Mon, 9 Jun 2008 23:26:09 +0000 (09:26 +1000)]
macintosh/media bay: Convert semaphore to mutex

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agomacintosh/therm_windtunnel: Convert semaphore to mutex
Daniel Walker [Mon, 9 Jun 2008 23:26:08 +0000 (09:26 +1000)]
macintosh/therm_windtunnel: Convert semaphore to mutex

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agospufs: Convert nopfn to fault
Nick Piggin [Mon, 9 Jun 2008 23:26:08 +0000 (09:26 +1000)]
spufs: Convert nopfn to fault

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Get rid of CROSS32{AS,LD,OBJCOPY}
Segher Boessenkool [Sat, 7 Jun 2008 23:42:52 +0000 (09:42 +1000)]
powerpc: Get rid of CROSS32{AS,LD,OBJCOPY}

CROSS32AS and CROSS32LD are never used (instead, CROSS32CC is used
with proper command line options).

CROSS32OBJCOPY isn't used anymore either, since the "wrapper" stuff
was added.

Remove these unused variables.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopcmcia: Use linux/of_{device,platform}.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:31:08 +0000 (16:31 +1000)]
pcmcia: Use linux/of_{device,platform}.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agodrivers/net: Use linux/of_{device,platform}.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:28:54 +0000 (16:28 +1000)]
drivers/net: Use linux/of_{device,platform}.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agomacintosh: Use linux/of_{device,platform}.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:27:02 +0000 (16:27 +1000)]
macintosh: Use linux/of_{device,platform}.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agohwmon: Use linux/of_platform.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:25:50 +0000 (16:25 +1000)]
hwmon: Use linux/of_platform.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopasemi-rng: Use linux/of_platform.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:20:05 +0000 (16:20 +1000)]
pasemi-rng: Use linux/of_platform.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoviotape: Use unlocked_ioctl
Stephen Rothwell [Fri, 23 May 2008 05:12:23 +0000 (15:12 +1000)]
viotape: Use unlocked_ioctl

This pushes the BKL down into the driver.  Based on a patch by Alan Cox.

We need to do it this way for now as the inode parameter of viotap_ioctl
is used internally as a flag.  We should do a further cleanup patch.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Optimise smp_wmb on 64-bit processors
Nick Piggin [Wed, 21 May 2008 14:12:31 +0000 (00:12 +1000)]
powerpc: Optimise smp_wmb on 64-bit processors

For 64-bit processors, lwsync is the recommended method of store/store
ordering on caching enabled memory.  For those subarchs which have
lwsync, use it rather than eieio for smp_wmb.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoMerge branch 'linux-2.6'
Paul Mackerras [Mon, 30 Jun 2008 00:16:50 +0000 (10:16 +1000)]
Merge branch 'linux-2.6'

16 years agoMerge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx
Paul Mackerras [Sun, 29 Jun 2008 23:57:05 +0000 (09:57 +1000)]
Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Sun, 29 Jun 2008 19:22:55 +0000 (12:22 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (42 commits)
  V4L/DVB (8108): Fix open/close race in saa7134
  V4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuff
  V4L/DVB (8097): xc5000: check device hardware state to determine if firmware download is needed
  V4L/DVB (8096): au8522: prevent false-positive lock status
  V4L/DVB (8092): videodev: simplify and fix standard enumeration
  V4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixed
  V4L/DVB (8074): av7110: OSD transfers should not be interrupted
  V4L/DVB (8073): av7110: Catch another type of ARM crash
  V4L/DVB (8071): tda10023: Fix possible kernel oops during initialisation
  V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 and enable card entry
  V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization
  V4L/DVB (8067): cx18: Fix firmware load for case when digital capture happens first
  V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 and FM radio
  V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-core
  V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE
  V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506
  V4L/DVB (8044): au8522: tuning optimizations
  V4L/DVB (8043): au0828: add support for additional USB device id's
  V4L/DVB (8042): DVB-USB UMT-010 channel scan oops
  V4L/DVB (8040): soc-camera: remove soc_camera_host_class class
  ...

16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 29 Jun 2008 19:22:30 +0000 (12:22 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.
  ACPI: don't walk tables if ACPI was disabled
  thermal: Create CONFIG_THERMAL_HWMON=n

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
Linus Torvalds [Sun, 29 Jun 2008 19:21:02 +0000 (12:21 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: fix a.out.h export to userspace with O= build.

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Sun, 29 Jun 2008 19:20:11 +0000 (12:20 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fw-sbp2: fix parsing of logical unit directories

16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Sun, 29 Jun 2008 19:19:02 +0000 (12:19 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Fix regression in UDF anchor block detection

16 years agoFix and clean top .gitignore
Eduard - Gabriel Munteanu [Thu, 26 Jun 2008 07:54:34 +0000 (10:54 +0300)]
Fix and clean top .gitignore

Removed vmlinux* rule because it matches too many useful files, replacing
it with rules matching filetype by filename (e.g. *.gz). Also unignored
.mailmap from the top directory. Added a comment telling the user how to
check for tracked files being ignored.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Sun, 29 Jun 2008 19:16:07 +0000 (12:16 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: fix up section mismatch warning
  Blackfin arch: fix bug - kernel boot fails when Spinlock and rw-lock debugging enabled

16 years agoMerge branch 'audit.b52' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit...
Linus Torvalds [Sun, 29 Jun 2008 19:15:10 +0000 (12:15 -0700)]
Merge branch 'audit.b52' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current

* 'audit.b52' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] remove useless argument type in audit_filter_user()
  [PATCH] audit: fix kernel-doc parameter notation
  [PATCH] kernel/audit.c: nlh->nlmsg_type is gotten more than once

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Sun, 29 Jun 2008 19:14:37 +0000 (12:14 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [patch 2/3] vfs: dcache cleanups
  [patch 1/3] vfs: dcache sparse fixes
  [patch 3/3] vfs: make d_path() consistent across mount operations
  [patch 4/4] flock: remove unused fields from file_lock_operations
  [patch 3/4] vfs: fix ERR_PTR abuse in generic_readlink
  [patch 2/4] fs: make struct file arg to d_path const
  [patch 1/4] vfs: path_{get,put}() cleanups
  [patch for 2.6.26 4/4] vfs: utimensat(): fix write access check for futimens()
  [patch for 2.6.26 3/4] vfs: utimensat(): fix error checking for {UTIME_NOW,UTIME_OMIT} case
  [patch for 2.6.26 1/4] vfs: utimensat(): ignore tv_sec if tv_nsec == UTIME_OMIT or UTIME_NOW
  [patch for 2.6.26 2/4] vfs: utimensat(): be consistent with utime() for immutable and append-only files
  [PATCH] fix cgroup-inflicted breakage in block_dev.c

16 years agokbuild: fix a.out.h export to userspace with O= build.
David Woodhouse [Fri, 27 Jun 2008 13:39:42 +0000 (14:39 +0100)]
kbuild: fix a.out.h export to userspace with O= build.

We need to check for existence of the a.out.h header in the source tree,
not the object tree, if we want it to get the right answer with O=.

Signed-off-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
16 years agopowerpc: Add dma nodes to 83xx, 85xx and 86xx boards
Kumar Gala [Fri, 27 Jun 2008 18:45:19 +0000 (13:45 -0500)]
powerpc: Add dma nodes to 83xx, 85xx and 86xx boards

Added DMA nodes for the elo/elo-plus DMA engines.

Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agofirewire: fw-sbp2: fix parsing of logical unit directories
Richard Sharpe [Wed, 25 Jun 2008 02:11:13 +0000 (19:11 -0700)]
firewire: fw-sbp2: fix parsing of logical unit directories

There is a small off-by-one bug in firewire-sbp2. This causes problems
when a device exports multiple LUN Directories. I found it when trying
to talk to a SONY DVD Jukebox.

Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Acked-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (op. order, changelog)
16 years agoV4L/DVB (8108): Fix open/close race in saa7134
Arjan van de Ven [Sun, 22 Jun 2008 20:03:02 +0000 (17:03 -0300)]
V4L/DVB (8108): Fix open/close race in saa7134

The saa7134 driver uses a (non-atomic) variable in an attempt to
only allow one opener of the device (how it deals with sending
the fd over unix sockets I don't know).

Unfortunately, the release function first decrements this variable,
and THEN goes on to disable more of the device. This allows for
a race where another opener of the device comes in after the decrement of
the variable, configures the hardware just to then see the hardware
be disabled by the rest of the release function.

This patch makes the release function use the same lock as the open
function to protect the hardware as well as the variable (which now
at least has some locking to protect it).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuff
Marcin Slusarz [Sun, 22 Jun 2008 12:11:40 +0000 (09:11 -0300)]
V4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuff

Move allocation after first check and fix memory leak.

Noticed-by: Daniel Marjamäki <danielm77@spray.se>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8097): xc5000: check device hardware state to determine if firmware download...
Steven Toth [Sun, 22 Jun 2008 00:06:02 +0000 (21:06 -0300)]
V4L/DVB (8097): xc5000: check device hardware state to determine if firmware download is needed

This patch ensures that the xc5000 will have firmware loaded as needed if the
part is powered down or reset via gpio from the host. An example of this, in
some cases, could be after the system resumes from standby or hibernate modes.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8096): au8522: prevent false-positive lock status
Steven Toth [Sat, 21 Jun 2008 22:32:41 +0000 (19:32 -0300)]
V4L/DVB (8096): au8522: prevent false-positive lock status

This decreases scan time in Queens, New York from 28 minutes to 7 minutes,
with the exact same services found.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8092): videodev: simplify and fix standard enumeration
Hans Verkuil [Sat, 21 Jun 2008 16:23:27 +0000 (13:23 -0300)]
V4L/DVB (8092): videodev: simplify and fix standard enumeration

VIDIOC_ENUMSTD did not return all the PAL/SECAM/NTSC variants: it just returned
one single PAL/SECAM/NTSC standard without separate entries for the trickier
standards like NTSC-JP.

Changed the code so that it behaves better.

Also simplified the if/switch statements into a common standards lookup table.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixed
Oliver Endriss [Fri, 20 Jun 2008 02:25:04 +0000 (23:25 -0300)]
V4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixed

Fix uncorrected block counter and bit error rate to follow DVB API spec:
- Unsupported controls return -ENOSYS.
- UNC must never be set to 0.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8074): av7110: OSD transfers should not be interrupted
Oliver Endriss [Fri, 20 Jun 2008 02:10:14 +0000 (23:10 -0300)]
V4L/DVB (8074): av7110: OSD transfers should not be interrupted

OSD transfers should not be interrupted.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8073): av7110: Catch another type of ARM crash
Oliver Endriss [Fri, 20 Jun 2008 02:04:27 +0000 (23:04 -0300)]
V4L/DVB (8073): av7110: Catch another type of ARM crash

Catch another type of ARM crash.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8071): tda10023: Fix possible kernel oops during initialisation
Oliver Endriss [Fri, 20 Jun 2008 01:45:55 +0000 (22:45 -0300)]
V4L/DVB (8071): tda10023: Fix possible kernel oops during initialisation

If the i2c write fails during initialisation, an oops happens
because state->frontend.dvb is still undefined. Fixed.

Thanks to Sigmund Augdal for reporting this bug,
and to Hartmut Birr for suggesting the fix.

Thanks-to: Sigmund Augdal <sigmund@snap.tv>
Thanks-to: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 and enable...
Andy Walls [Sun, 22 Jun 2008 05:00:09 +0000 (02:00 -0300)]
V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 and enable card entry

cx18: Fix S-Video and Compsite input settings for the Yuan MPC718 per user
reports from Yuri Warczynski <Yuri.Warczynski@gmail.com> and
Brian Hope <brian@hopefamily.info> and enable the card entry.  The tuner reset
GPIO pin is likely incorrect as the tuner firmware cannot be reloaded without a
reboot.  It is likely the audio routing is done via GPIO which is not
implemented yet, as users report audio doesn't work for some inputs.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization
Andy Walls [Sun, 22 Jun 2008 04:27:00 +0000 (01:27 -0300)]
V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization

cx18: Add I2C slave reset via GPIO upon initialization.  One user,
Michael <msd4824@yahoo.com>, has reported this allows his HVR-1600 EEPROM to
be consistently recognized when using (long,) 100 msec delays.   The delays in
this commit are nominal (10 & 40 msec) and need testing/tuning on boards with
I2C problems to find the right values.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8067): cx18: Fix firmware load for case when digital capture happens first
Andy Walls [Sun, 22 Jun 2008 03:04:21 +0000 (00:04 -0300)]
V4L/DVB (8067): cx18: Fix firmware load for case when digital capture happens first

This is a fix for the case when a digital capture from dvr0 happens first after
modprobe, before access to any cx18 v4l2 device nodes.  The initial dvb feed
start has been changed to load the firmware if not already loaded.  Also fixed a
use counter to correct dvb feed accounting if starting the transport DMA fails.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 and...
Andy Walls [Fri, 20 Jun 2008 02:17:05 +0000 (23:17 -0300)]
V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 and FM radio

Fix the cx18-cards.c structures for the HVR-1600 to reflect that audio Line In 2
and FM radio audio go to AIN3 and AIN4 of the CS5345 mux respectively.  Verified
by physical inspection of an HVR-1600MCE, by listening to FM broadcasts with the
HVR-1600MCE, and by comparing with the card definition for a PVR-150 in ivtv.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-core
Andy Walls [Sat, 14 Jun 2008 06:58:08 +0000 (03:58 -0300)]
V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-core

Change the cx18-av-core code so that accesses to cx23418 av core that
cause auto-configuration will be adjusted to emulate the auto-configuration
behavior of the cx25843.  This fixes the VBI displayed as video at the top of
the frame for NTSC and probably other things.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE
Michael Krufky [Tue, 17 Jun 2008 20:37:51 +0000 (17:37 -0300)]
V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE

The automatic Kconfig selection for tuners and frontends should be
conditional, based on !DVB_FE_CUSTOMISE.

This patch corrects the selection for VIDEO_CX18 on
MEDIA_TUNER_MXL5005S and DVB_S5H1409

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506
Tim Farrington [Sun, 15 Jun 2008 16:33:42 +0000 (13:33 -0300)]
V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506

Also, adds IR table for Avermedia A16d

Signed-off-by: Tim Farrington <timf@iinet.net.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8044): au8522: tuning optimizations
Michael Krufky [Fri, 13 Jun 2008 23:33:23 +0000 (20:33 -0300)]
V4L/DVB (8044): au8522: tuning optimizations

If the current modulation and frequency is already set to
the desired parameters, then don't re-tune.

Don't store current frequency until after we've tuned successfully.

Force a re-tune after resume from standby.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8043): au0828: add support for additional USB device id's
Michael Krufky [Fri, 13 Jun 2008 06:29:43 +0000 (03:29 -0300)]
V4L/DVB (8043): au0828: add support for additional USB device id's

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8042): DVB-USB UMT-010 channel scan oops
Austin Lund [Fri, 13 Jun 2008 14:02:43 +0000 (11:02 -0300)]
V4L/DVB (8042): DVB-USB UMT-010 channel scan oops

In the umt-010 driver the struct umt_properties sets the number of URBs for
transfer to 20.  But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10.

Not surprisingly this causes an oops for all devices which use the umt-010
chipset when they are inserted.

fix on Kaffeine channel scan for

Initialize stream count using MAX_NO_URBS_FOR_DATA_STREAM.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8040): soc-camera: remove soc_camera_host_class class
Guennadi Liakhovetski [Fri, 13 Jun 2008 12:11:01 +0000 (09:11 -0300)]
V4L/DVB (8040): soc-camera: remove soc_camera_host_class class

Devices can either be class devices or bus devices, not both at the
same time. Soc-camera host devices usually have a platform device as
their parent. Trying to also register them with a class crashes the
kernel, when linked statically. Interestingly, it works when built
as a module. Thanks to Paulius Zaleckas for reporting.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8039): pxa-camera: fix platform_get_irq() error handling.
Guennadi Liakhovetski [Fri, 13 Jun 2008 12:03:45 +0000 (09:03 -0300)]
V4L/DVB (8039): pxa-camera: fix platform_get_irq() error handling.

platform_get_irq() returns a negative value on error, not 0.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8037): tda18271: ensure that the thermometer is off during channel configuration
Michael Krufky [Wed, 11 Jun 2008 16:52:49 +0000 (13:52 -0300)]
V4L/DVB (8037): tda18271: ensure that the thermometer is off during channel configuration

Having the thermometer on during channel configuration
could cause tuning instability.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8036): tda18271: toggle rf agc speed mode on TDA18271HD/C2 only
Michael Krufky [Mon, 9 Jun 2008 05:03:31 +0000 (02:03 -0300)]
V4L/DVB (8036): tda18271: toggle rf agc speed mode on TDA18271HD/C2 only

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8035): tda18271: dont touch EB14 if rf_cal lookup is out of range
Michael Krufky [Mon, 9 Jun 2008 01:12:37 +0000 (22:12 -0300)]
V4L/DVB (8035): tda18271: dont touch EB14 if rf_cal lookup is out of range

The TDA18271HD/C1 rf_cal map lookup is expected to go out of range outside
of the frequency window 41 MHz - 61.1 MHz.  In these cases, the internal
RF tracking filters calibration mechanism is used.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8034): tda18271: fix IF notch frequency handling
Michael Krufky [Sun, 8 Jun 2008 23:10:29 +0000 (20:10 -0300)]
V4L/DVB (8034): tda18271: fix IF notch frequency handling

The IF notch bit gets unset when we update the Main Post Div register
value, before we have a chance to write the desired IF notch setting
to the tuner.  Move the IF notch configuration to after we update MPD.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8029): Improve error message at tda1004x_attach
Mauro Carvalho Chehab [Sat, 14 Jun 2008 14:27:34 +0000 (11:27 -0300)]
V4L/DVB (8029): Improve error message at tda1004x_attach

When an error occurs at firmware loading, sometimes, tda1004x stops answering.
Instead of reporting such error, attach code were assuming that the device were
answering an invalid ID (0xff). This can be seen when enabling debug options:

tda1004x: tda1004x_read_byte: reg=0x0
tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5

Now, instead of reporting an invalid ID, it will report the correct error:

tda10046: chip is not answering. Giving up.
saa7133[0]/dvb: failed to attach tda10046
saa7133[0]/dvb: frontend initialization failed

A possible improvement would be trying to reset the device.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8028): Improve error messages for tda1004x attach
Mauro Carvalho Chehab [Sat, 14 Jun 2008 13:44:04 +0000 (10:44 -0300)]
V4L/DVB (8028): Improve error messages for tda1004x attach

A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid
firmware:

DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision ff -- invalid
tda1004x: trying to boot from eeprom
tda1004x: found firmware revision ff -- invalid
tda1004x: waiting for firmware upload...
tda1004x: Error during firmware upload
tda1004x: found firmware revision ff -- invalid
tda1004x: firmware upload failed

Sometimes, loading/unloading this firmware makes tda1004x to return an invalid
ID. However, there were no printk messages to help to identify what were the
cause for the error.

With this patch, it will now print:

Invalid tda1004x ID = 0xff. Can't proceed
saa7133[0]/dvb: failed to attach tda10046
saa7133[0]/dvb: frontend initialization failed

Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input are working
Matthias Schwarzott [Fri, 13 Jun 2008 22:28:17 +0000 (19:28 -0300)]
V4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input are working

Describe exactly that only s-video and composite input are working on Avermedia
A700

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recovered
Mauro Carvalho Chehab [Sat, 14 Jun 2008 12:41:18 +0000 (09:41 -0300)]
V4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recovered

On some alsa versions, it seems that snd_pcm_substream_chip(substream)
is returning a NULL pointer. This causes an OOPS, as reported by:

https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.24/+bug/212271
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/212960

This patch avoids the OOPS by not letting and open() succeed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8022): saa7134: fix race between opening and closing the device
Marcin Slusarz [Tue, 10 Jun 2008 18:18:16 +0000 (15:18 -0300)]
V4L/DVB (8022): saa7134: fix race between opening and closing the device

decrementing dev->empress_users should be done as last action of ts_release,
because it sleeps and write access to dev->empress_started is not protected
in any way
(additionally closing thread could mute audio after opening thread unmuted it)

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8020): Fix callbacks functions of saa7134_empress
Dmitri Belimov [Tue, 10 Jun 2008 17:19:31 +0000 (14:19 -0300)]
V4L/DVB (8020): Fix callbacks functions of saa7134_empress

If I try v4l2-ctl --all -d /dev/video1 or v4l2-ctl --streamon -d /dev/video1
modules crashed:

*pde = 00000000
Modules linked in: ac battery loop saa7134_empress(F) saa6752hs(F) tuner_simple(F) tuner_types(F) tea5767(F) tda9887(F) tda8290(F) tea5761(F) tuner(F) snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib saa7134(F) snd_mpu401 parport_pc parport snd_timer snd_hwdep snd_mpu401_uart floppy rtc psmouse videodev(F) v4l1_compat(F) compat_ioctl32(F) v4l2_common(F) videobuf_dma_sg(F) videobuf_core(F) snd_rawmidi snd_seq_device via_ircc pcspkr snd ir_kbd_i2c(F) irda soundcore ir_common(F) crc_ccitt tveeprom(F) i2c_viapro i2c_core button via_agp agpgart evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk 8139cp via82cxxx ide_core 8139too mii ehci_hcd uhci_hcd usbcore thermal processor fan

EIP is at __mutex_lock_slowpath+0x29/0x7b
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process v4l2-ctl (pid: 2742, ti=ced7e000 task=cf325260 task.ti=ced7e000)
       d08e5411 00000000 ced7fed4 00000000 d0975acb 40045612 cfa86ee0 ffffffcd
       cf2b7000 ced7febc c03858d6 00000019 00000292 d089e4ec cf37b2a0 d089e4a0
Call Trace:
 [<c028b52b>] mutex_lock+0xa/0xb
 [<d08e5411>] videobuf_streamon+0xf/0x9a [videobuf_core]
 [<d0975acb>] __video_do_ioctl+0x136a/0x2d68 [videodev]
 [<d088f789>] task_end_request+0x40/0x51 [ide_core]
 [<d088c4aa>] ide_intr+0x187/0x192 [ide_core]
 [<c016a551>] mntput_no_expire+0x11/0x64
 [<c0160b1c>] path_walk+0x90/0x98
 [<d0977738>] video_ioctl2+0x173/0x239 [videodev]
 [<c0140936>] filemap_fault+0x202/0x370
 [<c014930a>] __do_fault+0x2c3/0x2fe
 [<c014ab03>] handle_mm_fault+0x22a/0x49f
 [<c0162737>] vfs_ioctl+0x47/0x5d
 [<c0162992>] do_vfs_ioctl+0x245/0x258
 [<c01629e6>] sys_ioctl+0x41/0x5b
 [<c01036a6>] sysenter_past_esp+0x5f/0x85
 =======================

After this fix all of that commands works without problem:

v4l2-ctl --all -d /dev/video1

Driver Info:
Driver name   : saa7134
Card type     : Beholder BeholdTV M6 Extra
Bus info      : PCI:0000:00:0d.0
Driver version: 526
Capabilities  : 0x05000001
Video Capture
Read/Write
Streaming
Format Video Capture:
Width/Height  : 720/576
Pixel Format  : MPEG
Field         : Any
Bytes per Line: 0
Size Image    : 58656
Colorspace    : Unknown (00000000)
Video input : 0 (CCIR656)
Video Standard = 0x000000ff
PAL-B/B1/G/H/I/D/D1/K

P.S. data from /dev/video1 is not correct :(( .

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8018): Add em2860 chip ID
Devin Heitmueller [Tue, 10 Jun 2008 15:35:42 +0000 (12:35 -0300)]
V4L/DVB (8018): Add em2860 chip ID

em28xx-cards.c
em28xx-reg.h
 - Add em2860 chip ID (seen on Pointnix Intra-Oral Camera)
   http://www.pointnix.com/ENG/dental/product_02.asp

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8017): Ensure em28xx extensions only get run against devs that support them
Devin Heitmueller [Tue, 10 Jun 2008 15:34:35 +0000 (12:34 -0300)]
V4L/DVB (8017): Ensure em28xx extensions only get run against devs that support them

em28xx-audio.c
em28xx-dvb.c
 - Em28xx extensions should ensure they are being only loaded against devices
   that support them.  Deals with case where there are multiple em28xx
   devices, some of which have DVB (or ALSA) support and some do not.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be on the...
Antti Palosaari [Tue, 10 Jun 2008 14:41:58 +0000 (11:41 -0300)]
V4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be on the safe side

- change msleep(0) to msleep(1)

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8013): gl861: remove useless identify_state
Antti Palosaari [Thu, 29 May 2008 01:04:12 +0000 (22:04 -0300)]
V4L/DVB (8013): gl861: remove useless identify_state

- remove useless identify_state - device is always warm

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8012): gl861: sleep a little to avoid I2C errors
Antti Palosaari [Thu, 29 May 2008 00:55:06 +0000 (21:55 -0300)]
V4L/DVB (8012): gl861: sleep a little to avoid I2C errors

- add little sleep to avoid I2C errors arising on faster CPUs

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8011): em28xx: enable DVB for HVR-900
Devin Heitmueller [Mon, 9 Jun 2008 17:59:05 +0000 (14:59 -0300)]
V4L/DVB (8011): em28xx: enable DVB for HVR-900

em28xx-cards.c
 - DVB support is supposed to be enabled for the first generation HVR-900.
   This device was confirmed with DVB by mkrufky when we did the original work
   in April, but I guess we forgot to set the flag.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8010): em28xx: Properly register extensions for already attached devices
Devin Heitmueller [Mon, 9 Jun 2008 17:58:04 +0000 (14:58 -0300)]
V4L/DVB (8010): em28xx: Properly register extensions for already attached devices

em28xx-video.c
 - Properly handle loading of the module when multiple devices are already
   connected (such as at bootup).  Before we were only calling dvb_init()
   against the last device in the list, so while we were handling subsequent
   adds properly, if there were multiple devices present on driver load,
   everybody except the last device would not get initialized.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8008): cx18: remove duplicate audio and video input enums
Hans Verkuil [Sun, 8 Jun 2008 09:05:18 +0000 (06:05 -0300)]
V4L/DVB (8008): cx18: remove duplicate audio and video input enums

cx18-cards.h had a copy of the audio and video input enums
from cx18-av-core.h, but with different prefixes. Removed
that copy and used the ones from cx18-av-core.h.

Thanks to Andy Walls <awalls@radix.net> for the report.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputs
Hans Verkuil [Sat, 7 Jun 2008 14:18:17 +0000 (11:18 -0300)]
V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputs

The S-Video LUMA input was restricted to the In1-In4 inputs, but it
turns out that it can use the full range of In1-In8.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8005): Fix OOPS if frontend is null
Mauro Carvalho Chehab [Sat, 7 Jun 2008 18:54:10 +0000 (15:54 -0300)]
V4L/DVB (8005): Fix OOPS if frontend is null

Thanks to timf <timf@iinet.net.au> and Mike Galbraith <efault@gmx.de> to report
this issue.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8004): Fix INPUT dependency at budget-ci
Mauro Carvalho Chehab [Thu, 5 Jun 2008 21:59:08 +0000 (18:59 -0300)]
V4L/DVB (8004): Fix INPUT dependency at budget-ci

As reported by Ingo Molnar:
MODPOST 346 modules
ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined!
ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined!
ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined!
ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined!
ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined!

This occurs when:

CONFIG_INPUT=n
CONFIG_VIDEO_IR=m
CONFIG_DVB_BUDGET_CI=m

Thanks-to: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agopowerpc/booke: Add kprobes support for booke style processors
Kumar Gala [Thu, 26 Jun 2008 07:01:37 +0000 (02:01 -0500)]
powerpc/booke: Add kprobes support for booke style processors

This patch is based on work done by Madhvesh. R. Sulibhavi back in
March 2007.

We refactor some of the single step handling since it differs between
"classic" and "booke" powerpc cores.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/kprobes: Some minor fixes
Kumar Gala [Thu, 26 Jun 2008 06:57:58 +0000 (01:57 -0500)]
powerpc/kprobes: Some minor fixes

* Mark __flush_icache_range as a function that can't be probed since its
  used by the kprobe code.

* Fix an issue with single stepping and async exceptions.  We need to
  ensure that we dont get an async exception (external, decrementer, etc)
  while we are attempting to single step the probe point.

  Added a check to ensure we only handle a single step if its really
  intended for the instruction in question.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/QE: use arch_initcall to probe QUICC Engine GPIOs
Anton Vorontsov [Wed, 11 Jun 2008 23:42:14 +0000 (03:42 +0400)]
powerpc/QE: use arch_initcall to probe QUICC Engine GPIOs

It was discussed that global arch_initcall() is preferred way to probe
QE GPIOs, so let's use it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: Update pin setup for 8560ads
Vitaly Bordug [Thu, 12 Jun 2008 00:30:13 +0000 (04:30 +0400)]
powerpc/85xx: Update pin setup for 8560ads

Ports B and C pins programming is changed to get SCC2 UART and FCC3
ethernet work.

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/cpm: Remove !CONFIG_PPC_CPM_NEW_BINDING code
Kumar Gala [Thu, 12 Jun 2008 13:12:49 +0000 (08:12 -0500)]
powerpc/cpm: Remove !CONFIG_PPC_CPM_NEW_BINDING code

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agocpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code
Kumar Gala [Thu, 12 Jun 2008 13:05:09 +0000 (08:05 -0500)]
cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agocpm_uart: fix whitespace issues
Kumar Gala [Thu, 12 Jun 2008 12:53:48 +0000 (07:53 -0500)]
cpm_uart: fix whitespace issues

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/e500mc: flush L2 on NAP for e500mc
Kumar Gala [Thu, 19 Jun 2008 14:40:31 +0000 (09:40 -0500)]
powerpc/e500mc: flush L2 on NAP for e500mc

If we have an L2CSR register (e500mc) we need to flush the L2 before going
to nap.  We use the HW flush mechanism provided in that register.

The code reuses the CPU_FTR_604_PERF_MON bit as it is no longer used by
any code in the kernel.  Additionally we didn't reuse the exist L2CR
feature bit as this is intended for the 7xxx L2CR register and L2CSR
is part of the new Freescale "Book-E" registers.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: add DOZE/NAP support for e500 core
Kumar Gala [Wed, 18 Jun 2008 21:26:52 +0000 (16:26 -0500)]
powerpc/85xx: add DOZE/NAP support for e500 core

The e500 core enter DOZE/NAP power-saving modes when the core go to
cpu_idle routine.

The power management default running mode is DOZE, If the user

echo 1 > /proc/sys/kernel/powersave-nap

the system will change to NAP running mode.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agoMerge branches 'release', 'acpi_disabled' and 'bugzilla-10958' into release
Len Brown [Thu, 26 Jun 2008 05:56:35 +0000 (01:56 -0400)]
Merge branches 'release', 'acpi_disabled' and 'bugzilla-10958' into release