From: Dale Farnsworth Date: Mon, 7 Apr 2008 22:08:06 +0000 (+1000) Subject: [POWERPC] prpmc2800: Fix frequencies in prpmc2800.dts X-Git-Tag: v2.6.26-rc1~1125^2~62 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=fb9d93de6049922c4d46cc2dc9d2eeec07369e7f;p=linux-2.6 [POWERPC] prpmc2800: Fix frequencies in prpmc2800.dts After the conversion to dts v1 format, seeing the frequencies in decimal made it obvious that some of them had been incorrectly truncated. This fixes them. Note that the PCI frequency comes from a different source and is documented as 66MHz, so it was left at 66000000. Signed-off-by: Dale Farnsworth Acked-by: Mark A. Greer Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index b96b400dc3..822aac7e5b 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -27,7 +27,7 @@ PowerPC,7447 { device_type = "cpu"; reg = <0>; - clock-frequency = <733000000>; /* Default */ + clock-frequency = <733333333>; /* Default */ bus-frequency = <133333333>; timebase-frequency = <33333333>; i-cache-line-size = <32>; @@ -137,7 +137,7 @@ compatible = "marvell,mv64x60-brg"; reg = <0xb200 0x8>; clock-src = <8>; - clock-frequency = <133000000>; + clock-frequency = <133333333>; current-speed = <9600>; bcr = <0>; }; @@ -146,7 +146,7 @@ compatible = "marvell,mv64x60-brg"; reg = <0xb208 0x8>; clock-src = <8>; - clock-frequency = <133000000>; + clock-frequency = <133333333>; current-speed = <9600>; bcr = <0>; };