From: Jeremy Fitzhardinge Date: Wed, 30 Jan 2008 12:34:11 +0000 (+0100) Subject: x86: defer cr3 reload when doing pud_clear() X-Git-Tag: v2.6.25-rc1~1143^2~5 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=fa28ba21cec24d3fa1279bcae7e5d5ff6224635a;p=linux-2.6 x86: defer cr3 reload when doing pud_clear() PAE mode requires that we reload cr3 in order to guarantee that changes to the pgd will be noticed by the processor. This means that in principle pud_clear needs to reload cr3 every time. However, because reloading cr3 implies a tlb flush, we want to avoid it where possible. pud_clear() is only used in a couple of places: - in free_pmd_range(), when pulling down a range of process address space, and - huge_pmd_unshare() In both cases, the calling code will do a a tlb flush anyway, so there's no need to do it within pud_clear(). In free_pmd_range(), the pud_clear is immediately followed by pmd_free_tlb(); we can hook that to make the mmu_gather do an unconditional full flush to make sure cr3 gets reloaded. In huge_pmd_unshare, it is followed by flush_tlb_range, which always results in a full cr3-reload tlb flush. Signed-off-by: Jeremy Fitzhardinge Cc: Andi Kleen Cc: Linus Torvalds Cc: H. Peter Anvin Cc: William Irwin Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h index 0caa37a9a2..10c2b452e6 100644 --- a/include/asm-x86/pgalloc_32.h +++ b/include/asm-x86/pgalloc_32.h @@ -74,6 +74,13 @@ static inline void pmd_free(pmd_t *pmd) static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) { + /* This is called just after the pmd has been detached from + the pgd, which requires a full tlb flush to be recognized + by the CPU. Rather than incurring multiple tlb flushes + while the address space is being pulled down, make the tlb + gathering machinery do a full flush when we're done. */ + tlb->fullmm = 1; + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); tlb_remove_page(tlb, virt_to_page(pmd)); } diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h index ed4c6f0e57..a195c3e757 100644 --- a/include/asm-x86/pgtable-3level.h +++ b/include/asm-x86/pgtable-3level.h @@ -96,14 +96,23 @@ static inline void pud_clear(pud_t *pudp) set_pud(pudp, __pud(0)); /* - * Pentium-II erratum A13: in PAE mode we explicitly have to flush - * the TLB via cr3 if the top-level pgd is changed... + * In principle we need to do a cr3 reload here to make sure + * the processor recognizes the changed pgd. In practice, all + * the places where pud_clear() gets called are followed by + * full tlb flushes anyway, so we can defer the cost here. * - * XXX I don't think we need to worry about this here, since - * when clearing the pud, the calling code needs to flush the - * tlb anyway. But do it now for safety's sake. - jsgf + * Specifically: + * + * mm/memory.c:free_pmd_range() - immediately after the + * pud_clear() it does a pmd_free_tlb(). We change the + * mmu_gather structure to do a full tlb flush (which has the + * effect of reloading cr3) when the pagetable free is + * complete. + * + * arch/x86/mm/hugetlbpage.c:huge_pmd_unshare() - the call to + * this is followed by a flush_tlb_range, which on x86 does a + * full tlb flush. */ - write_cr3(read_cr3()); } #define pud_page(pud) \