From: Salyzyn, Mark Date: Tue, 30 Oct 2007 19:50:49 +0000 (-0400) Subject: [SCSI] aacraid: forced reset override X-Git-Tag: v2.6.25-rc1~1230^2~163 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f858317d894a22eb2c26edcd26c7060fc4f40a15;p=linux-2.6 [SCSI] aacraid: forced reset override Some of our vendors have requested that our adapters ignore the hardware reset attempts during recovery and have enforced this with changes in Adapter Firmware. Some of our customers have requested the option to be able to reset the adapter under adverse adapter failure, we even had a few defects reported here considering it a regression that the Adapter could not be reset. This patch addresses this dichotomy. The user can force the adapter to be reset if it supports the IOP_RESET_ALWAYS command, in cases where the adapter has been programmed to ignore the reset, by setting the aacraid.check_reset parameter to a value of -1. The driver will not reset an Adapter that does not support the reset command(s). This patch also fixes and cleans up some of the logic associated with resetting the adapter. Signed-off-by: Mark Salyzyn Signed-off-by: James Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a77ab8d693..ad8912cbe6 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -179,7 +179,7 @@ MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health che int aac_check_reset = 1; module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the adapter."); +MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it."); int expose_physicals = -1; module_param(expose_physicals, int, S_IRUGO|S_IWUSR); @@ -1305,9 +1305,9 @@ int aac_get_adapter_info(struct aac_dev* dev) (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid), dev->supplement_adapter_info.VpdInfo.Tsid); } - if (!aac_check_reset || + if (!aac_check_reset || ((aac_check_reset != 1) && (dev->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET))) { + le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) { printk(KERN_INFO "%s%d: Reset Adapter Ignored\n", dev->name, dev->id); } @@ -1798,7 +1798,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd) if (active) return SCSI_MLQUEUE_DEVICE_BUSY; - aac = (struct aac_dev *)scsicmd->device->host->hostdata; + aac = (struct aac_dev *)sdev->host->hostdata; if (aac->in_reset) return SCSI_MLQUEUE_HOST_BUSY; diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index abce48ccc8..cb9a92f894 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -1217,12 +1217,13 @@ int aac_reset_adapter(struct aac_dev * aac, int forced) } /* Quiesce build, flush cache, write through mode */ - aac_send_shutdown(aac); + if (forced < 2) + aac_send_shutdown(aac); spin_lock_irqsave(host->host_lock, flagv); - retval = _aac_reset_adapter(aac, forced); + retval = _aac_reset_adapter(aac, forced ? forced : ((aac_check_reset != 0) && (aac_check_reset != 1))); spin_unlock_irqrestore(host->host_lock, flagv); - if (retval == -ENODEV) { + if ((forced < 2) && (retval == -ENODEV)) { /* Unwind aac_send_shutdown() IOP_RESET unsupported/disabled */ struct fib * fibctx = aac_fib_alloc(aac); if (fibctx) { @@ -1372,14 +1373,14 @@ int aac_check_health(struct aac_dev * aac) printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED); - if (!aac_check_reset || + if (!aac_check_reset || ((aac_check_reset != 1) && (aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET))) + le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) goto out; host = aac->scsi_host_ptr; if (aac->thread->pid != current->pid) spin_lock_irqsave(host->host_lock, flagv); - BlinkLED = _aac_reset_adapter(aac, 0); + BlinkLED = _aac_reset_adapter(aac, aac_check_reset != 1); if (aac->thread->pid != current->pid) spin_unlock_irqrestore(host->host_lock, flagv); return BlinkLED; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9dd331bc29..b4c9ff1b08 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -584,8 +584,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) * support a register, instead of a commanded, reset. */ if ((aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_MU_RESET|AAC_OPTION_IGNORE_RESET)) == - le32_to_cpu(AAC_OPTION_MU_RESET)) + le32_to_cpu(AAC_OPTION_MU_RESET)) && + aac_check_reset && + ((aac_check_reset != 1) || + (aac->supplement_adapter_info.SupportedOptions2 & + le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */ return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */ } diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 73eef3dc5d..710a03e54e 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -549,7 +549,9 @@ int _aac_rx_init(struct aac_dev *dev) dev->OIMR = status = rx_readb (dev, MUnit.OIMR); if ((((status & 0x0c) != 0x0c) || aac_reset_devices || reset_devices) && !aac_rx_restart_adapter(dev, 0)) - ++restart; + /* Make sure the Hardware FIFO is empty */ + while ((++restart < 512) && + (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL)); /* * Check to see if the board panic'd while booting. */