From: Eric W. Biederman <ebiederman@xmission.com>
Date: Thu, 29 Jun 2006 09:25:02 +0000 (-0700)
Subject: [PATCH] genirq: irq: document what an IRQ is
X-Git-Tag: v2.6.18-rc1~363
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f702d7013c7470284843a6370aaa53b8b75c5a40;p=linux-2.6

[PATCH] genirq: irq: document what an IRQ is

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/Documentation/IRQ.txt b/Documentation/IRQ.txt
new file mode 100644
index 0000000000..1011e71750
--- /dev/null
+++ b/Documentation/IRQ.txt
@@ -0,0 +1,22 @@
+What is an IRQ?
+
+An IRQ is an interrupt request from a device.
+Currently they can come in over a pin, or over a packet.
+Several devices may be connected to the same pin thus
+sharing an IRQ.
+
+An IRQ number is a kernel identifier used to talk about a hardware
+interrupt source.  Typically this is an index into the global irq_desc
+array, but except for what linux/interrupt.h implements the details
+are architecture specific.
+
+An IRQ number is an enumeration of the possible interrupt sources on a
+machine.  Typically what is enumerated is the number of input pins on
+all of the interrupt controller in the system.  In the case of ISA
+what is enumerated are the 16 input pins on the two i8259 interrupt
+controllers.
+
+Architectures can assign additional meaning to the IRQ numbers, and
+are encouraged to in the case  where there is any manual configuration
+of the hardware involved.  The ISA IRQs are a classic example of
+assigning this kind of additional meaning.