From: Hans Verkuil Date: Sun, 22 Jun 2008 15:11:13 +0000 (-0300) Subject: V4L/DVB (8107): cx18: improve support for the Raptor board. X-Git-Tag: v2.6.27-rc1~966^2~200 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f24648e42fd4b7d3ad5af6eaefe0214426933954;p=linux-2.6 V4L/DVB (8107): cx18: improve support for the Raptor board. - add radio definition - reset the audio firmware (required for this board, harmless for the others) Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index e429598982..456fc924cf 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -268,6 +268,7 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { .tuners = { { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, .ddr = { /* MT 46V16M16 memory */ .chip_config = 0x50306, diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c index 2694ce3506..2c280728dd 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -345,6 +345,11 @@ int cx18_firmware_init(struct cx18 *cx) int sz = load_apu_fw_direct("v4l-cx23418-apu.fw", cx->enc_mem, cx, CX18_FW_APU_SIZE); + write_enc(0xE51FF004, 0); + write_enc(0xa00000, 4); /* todo: not hardcoded */ + write_reg(0x00010000, CX18_PROC_SOFT_RESET); /* Start APU */ + cx18_msleep_timeout(500, 0); + sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw", cx->enc_mem, cx, CX18_FW_CPU_SIZE);