From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Fri, 11 May 2007 05:23:25 +0000 (-0700)
Subject: pm3fb: Preliminary 2.4 to 2.6 port
X-Git-Tag: v2.6.22-rc1~42
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f23a06f076173c1f56572556169bf9e1793c5d59;p=linux-2.6

pm3fb: Preliminary 2.4 to 2.6 port

This is a basic port from 2.4 kernel to 2.6.  Acceleration is lost and big
endian support probably too.  The driver works in 8, 16 and 32 bit mode.

[adaplas]
- change VESA_* to FB_BLANK_* constants
- removed unused function clear_memory
- fix uninitialized variable compiler warning
- some whitespace cleaning

[akpm@linux-foundation.org: Nuke pestiferous CVS string]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index f54438828c..5511a8f21d 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1431,8 +1431,11 @@ config FB_ARK
 	  and ICS 5342 RAMDAC.
 
 config FB_PM3
-	tristate "Permedia3 support"
-	depends on FB && PCI && BROKEN
+	tristate "Permedia3 support (EXPERIMENTAL)"
+	depends on FB && PCI && EXPERIMENTAL
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
 	help
 	  This is the frame buffer device driver for the 3DLabs Permedia3
 	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index bd787e8017..6c4dfcb0fe 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -1,55 +1,25 @@
 /*
  *  linux/drivers/video/pm3fb.c -- 3DLabs Permedia3 frame buffer device
- *  
- *  Copyright (C) 2001 Romain Dolbeau <dolbeau@irisa.fr>
+ *
+ *  Copyright (C) 2001 Romain Dolbeau <romain@dolbeau.org>.
+ *
+ *  Ported to 2.6 kernel on 1 May 2007 by Krzysztof Helt <krzysztof.h1@wp.pl>
+ *	based on pm2fb.c
+ *
  *  Based on code written by:
- *           Sven Luther, <luther@dpt-info.u-strasbg.fr>
- *           Alan Hourihane, <alanh@fairlite.demon.co.uk>
- *           Russell King, <rmk@arm.linux.org.uk>
+ *	   Sven Luther, <luther@dpt-info.u-strasbg.fr>
+ *	   Alan Hourihane, <alanh@fairlite.demon.co.uk>
+ *	   Russell King, <rmk@arm.linux.org.uk>
  *  Based on linux/drivers/video/skeletonfb.c:
  *	Copyright (C) 1997 Geert Uytterhoeven
  *  Based on linux/driver/video/pm2fb.c:
- *      Copyright (C) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
- *      Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
+ *	Copyright (C) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ *	Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
  *  more details.
  *
- *  $Header: /cvsroot/linux/drivers/video/pm3fb.c,v 1.1 2002/02/25 19:11:06 marcelo Exp $
- *
- *  CHANGELOG:
- *  Mon Feb 11 10:35:48 MET 2002, v 1.4.11B: Cosmetic update.
- *  Wed Jan 23 14:16:59 MET 2002, v 1.4.11: Preliminary 2.5.x support, patch for 2.5.2.
- *  Wed Nov 28 11:08:29 MET 2001, v 1.4.10: potential bug fix for SDRAM-based board, patch for 2.4.16.
- *  Thu Sep 20 10:24:42 MET DST 2001, v 1.4.9: sync bug fix, preliminary flatpanel support, better timings.
- *  Tue Aug 28 10:13:01 MET DST 2001, v 1.4.8: memory timings check, minor bug fixes.
- *  Wed Jul 18 19:06:14 CEST 2001, v 1.4.7: Mode fix (800x600-100, 1024x768-100 changed), using HW panning + accel bug fix.
- *  Mon Jun 25 10:33:56 MET DST 2001, v 1.4.6: Depth 12 fix, chip reset ioctl, moved memory erase ioctl to DEBUG.
- *  Wed Jun 20 11:13:08 MET DST 2001, v 1.4.5: Fixed missing blinking cursor in 8bpp, code cleaning, memory erase IOCTL.
- *  Mon Jun 18 16:00:27 CEST 2001, v 1.4.4: Depth 12 (RGBA 4444) support, code cleaning.
- *  Fri Jun 15 13:53:01 CEST 2001, v 1.4.3: Removed warnings, depth 15 support, add 'depth' option.
- *  Thu Jun 14 10:13:52 MET DST 2001, v 1.4.2: Fixed depth switching bug, preliminary 15bpp (RGB5551) support.
- *  Thu Apr 12 11:16:45 MET DST 2001, v 1.4.1B: Doc updates.
- *  Fri Apr  6 11:12:53 MET DST 2001, v 1.4.1: Configure.help, minor cleanup
- *  Thu Mar 29 10:56:50 MET DST 2001, v 1.4.0: Module & module options support (note: linux patch changed, 2.2.19 added).
- *  Thu Mar 15 15:30:31 MET 2001, v 1.3.2: Fixed mirroring bug on little-endian.
- *  Wed Mar 14 21:25:54 CET 2001, v 1.3.1: Fixed bug in BlockMove (_bmov).
- *  Tue Mar 13 10:53:19 MET 2001, v 1.3.0: Character drawing hardware support (in all width between 1 and 16), fixes.
- *  Thu Mar  8 10:20:16 MET 2001, v 1.2.2: Better J2000 support, "font:" option.
- *  Tue Mar  6 21:25:04 CET 2001, v 1.2.1: Better acceleration support.
- *  Mon Mar  5 21:54:17 CET 2001, v 1.2.0: Partial acceleration support (clear & bmove)
- *  Mon Mar  5 12:52:15 CET 2001, v 1.1.3: Big pan_display fix.
- *  Sun Mar  4 22:21:50 CET 2001, v 1.1.2: (numerous) bug fixes.
- *  Fri Mar  2 15:54:07 CET 2001, v 1.1.1: Might have Appian J2000 support, resource mangement in 2.4
- *  Wed Feb 28 18:21:35 CET 2001, v 1.1.0: Might have multiple boards support (added, but not yest tested)
- *  Tue Feb 27 17:31:12 CET 2001, v 1.0.6: fixes boot-time mode select, add more default mode
- *  Tue Feb 27 14:01:36 CET 2001, v 1.0.5: fixes (1.0.4 was broken for 2.2), cleaning up
- *  Mon Feb 26 23:17:36 CET 2001, v 1.0.4: preliminary 2.4.x support, dropped (useless on pm3) partial product, more OF fix
- *  Mon Feb 26 20:59:05 CET 2001, v 1.0.3: No more shadow register (and wasted memory), endianess fix, use OF-preset resolution by default
- *  Wed Feb 21 22:09:30 CET 2001, v 1.0.2: Code cleaning for future multiboard support, better OF support, bugs fix
- *  Wed Feb 21 19:58:56 CET 2001, v 1.0.1: OpenFirmware support, fixed memory detection, better debug support, code cleaning
- *  Wed Feb 21 14:47:06 CET 2001, v 1.0.0: First working version
  */
 
 #include <linux/module.h>
@@ -58,856 +28,155 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/vmalloc.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/ctype.h>
-
-#include <video/fbcon.h>
-#include <video/fbcon-mfb.h>
-#include <video/fbcon-cfb2.h>
-#include <video/fbcon-cfb4.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
-#include <video/fbcon-cfb24.h>
-#include <video/fbcon-cfb32.h>
-#include <video/pm3fb.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <video/pm3fb.h>
 
-#ifdef CONFIG_FB_OF
-#include <asm/prom.h>
+#if !defined(CONFIG_PCI)
+#error "Only generic PCI cards supported."
 #endif
 
-/* ************************************* */
-/* ***** The various "global" data ***** */
-/* ************************************* */
-
-/* those will need a rework for multiple board support */
-/* Driver name */
-static const char permedia3_name[16] = "Permedia3";
-
-/* the fb_par struct, mandatory */
-struct pm3fb_par {
-	u32 pixclock;		/* pixclock in KHz */
-
-	u32 width;		/* width of virtual screen */
-	u32 height;		/* height of virtual screen */
-
-	u32 hsstart;		/* horiz. sync start */
-	u32 hsend;		/* horiz. sync end */
-	u32 hbend;		/* horiz. blank end (also gate end) */
-	u32 htotal;		/* total width (w/ sync & blank) */
-
-	u32 vsstart;		/* vert. sync start */
-	u32 vsend;		/* vert. sync end */
-	u32 vbend;		/* vert. blank end */
-	u32 vtotal;		/* total height (w/ sync & blank) */
-
-	u32 stride;		/* screen stride */
-	u32 base;		/* screen base (xoffset+yoffset) in 128 bits unit */
-	/* NOTE : unlike other pm3 stuff above, stored *after* shiftbpp. don't ask */
-	u32 depth;		/* screen depth (8, 12, 15, 16 or 32) */
-	u32 video;		/* video control (hsync,vsync) */
-};
-
-/* memory timings */
-struct pm3fb_timings
-{
-	unsigned long caps;
-	unsigned long timings;
-	unsigned long control;
-	unsigned long refresh;
-	unsigned long powerdown;
-};
-typedef enum pm3fb_timing_result { pm3fb_timing_ok, pm3fb_timing_problem, pm3fb_timing_retry } pm3fb_timing_result;
-#define PM3FB_UNKNOWN_TIMING_VALUE ((unsigned long)-1)
-#define PM3FB_UNKNOWN_TIMINGS { PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE }
-
-/* the fb_info struct, mandatory */
-struct pm3fb_info {
-	struct fb_info_gen gen;
-	unsigned long board_num; /* internal board number */
-	unsigned long use_current;
-	struct pm3fb_par *current_par;
-	struct pci_dev *dev;    /* PCI device */
-	unsigned long board_type; /* index in the cardbase */
-	unsigned char *fb_base;	/* framebuffer memory base */
-	u32 fb_size;		/* framebuffer memory size */
-	unsigned char *p_fb;	/* physical address of frame buffer */
-	unsigned char *v_fb;	/* virtual address of frame buffer */
-	unsigned char *pIOBase;	/* physical address of registers region, must be rg_base or rg_base+PM2_REGS_SIZE depending on the host endianness */
-	unsigned char *vIOBase;	/* address of registers after ioremap() */
-	struct {
-		u8 transp;
-		u8 red;
-		u8 green;
-		u8 blue;
-	} palette[256];
-	union {
-#ifdef FBCON_HAS_CFB16
-		u16 cmap12[16]; /* RGBA 4444 */
-		u16 cmap15[16]; /* RGBA 5551 */
-		u16 cmap16[16]; /* RGBA 5650 */
-#endif
-#ifdef FBCON_HAS_CFB32
-		u32 cmap32[16];
+#undef PM3FB_MASTER_DEBUG
+#ifdef PM3FB_MASTER_DEBUG
+#define DPRINTK(a,b...)	printk(KERN_DEBUG "pm3fb: %s: " a, __FUNCTION__ , ## b)
+#else
+#define DPRINTK(a,b...)
 #endif
-	} cmap;
-	struct pm3fb_timings memt;
-};
-
-/* regular resolution database*/
-static struct {
-	char name[16];
-	struct pm3fb_par user_mode;
-} mode_base[] __initdata = {
-	{
-		"default-800x600", {
-	49500, 800, 600, 16, 96, 256, 1056, 1, 4, 25, 625,
-			    800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}}, {
-		"1024x768-74", {
-	78752, 1024, 768, 32, 128, 304, 1328, 1, 4, 38,
-			    806, 1024, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}}, {
-		"1024x768-74-32", {
-			78752, 1024, 768, 32, 128, 304, 1328, 1, 4, 38,
-			806, 1024, 0, 32,
-			PM3VideoControl_ENABLE |
-			PM3VideoControl_HSYNC_ACTIVE_HIGH
-			|
-			PM3VideoControl_VSYNC_ACTIVE_HIGH
-			| PM3VideoControl_PIXELSIZE_32BIT}},
-/* Generated mode : "1600x1024", for the SGI 1600SW flat panel*/
-	{
-		"SGI1600SW", {
-			108000, 1600, 1024, 16, 56, 104, 1704, 3, 6, 32,
-			1056, 1600, 0, 8,
-			PM3VideoControl_ENABLE|
-			PM3VideoControl_HSYNC_ACTIVE_LOW|PM3VideoControl_VSYNC_ACTIVE_LOW|
-			PM3VideoControl_PIXELSIZE_32BIT}}, 
-/* ##### auto-generated mode, by fbtimings2pm3 */
-/* Generated mode : "640x480-60" */
-	{
-		"640x480-60", {
-	25174, 640, 480, 16, 112, 160, 800, 10, 12, 45,
-			    525, 640, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-72" */
-	{
-		"640x480-72", {
-	31199, 640, 480, 24, 64, 192, 832, 9, 12, 40, 520,
-			    640, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-75" */
-	{
-		"640x480-75", {
-	31499, 640, 480, 16, 80, 200, 840, 1, 4, 20, 500,
-			    640, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-90" */
-	{
-		"640x480-90", {
-	39909, 640, 480, 32, 72, 192, 832, 25, 39, 53, 533,
-			    640, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-100" */
-	{
-		"640x480-100", {
-	44899, 640, 480, 32, 160, 208, 848, 22, 34, 51,
-			    531, 640, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-48-lace" */
-/* INTERLACED NOT SUPPORTED
-  {"800x600-48-lace", {35999, 800, 600, 80, 208, 264, 1064, 11, 23, 102, 702, 800, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}}, 
-   INTERLACED NOT SUPPORTED */
-/* Generated mode : "800x600-56" */
-	{
-		"800x600-56", {
-	35999, 800, 600, 24, 96, 224, 1024, 1, 3, 25, 625,
-			    800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-60" */
-	{
-		"800x600-60", {
-	40000, 800, 600, 40, 168, 256, 1056, 1, 5, 28, 628,
-			    800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-70" */
-	{
-		"800x600-70", {
-	44899, 800, 600, 24, 168, 208, 1008, 9, 21, 36,
-			    636, 800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-72" */
-	{
-		"800x600-72", {
-	50000, 800, 600, 56, 176, 240, 1040, 37, 43, 66,
-			    666, 800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-75" */
-	{
-		"800x600-75", {
-	49497, 800, 600, 16, 96, 256, 1056, 1, 4, 25, 625,
-			    800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-90" */
-	{
-		"800x600-90", {
-	56637, 800, 600, 8, 72, 192, 992, 8, 19, 35, 635,
-			    800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-100", from /etc/fb.modes */
-/* DISABLED, hsstart == 0
-	{
-		"800x600-100", {
-	67499, 800, 600, 0, 64, 280, 1080, 7, 11, 25, 625,
-			    800, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-*/
-/* Generated mode : "800x600-100", from ??? */
-	{
-		"800x600-100", {
-			69650, 800, 600, 64, 128, 288, 1088, 4, 10, 40, 640, 800, 0, 8,
-			PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_LOW|
-			PM3VideoControl_VSYNC_ACTIVE_LOW|PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-43-lace" */
-/* INTERLACED NOT SUPPORTED
-  {"1024x768-43-lace", {44899, 1024, 768, 8, 184, 240, 1264, 1, 9, 49, 817, 1024, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}}, 
-   INTERLACED NOT SUPPORTED */
-/* Generated mode : "1024x768-60" */
-	{
-		"1024x768-60", {
-	64998, 1024, 768, 24, 160, 320, 1344, 3, 9, 38,
-			    806, 1024, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-70" */
-	{
-		"1024x768-70", {
-	74996, 1024, 768, 24, 160, 304, 1328, 3, 9, 38,
-			    806, 1024, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-72" */
-	{
-		"1024x768-72", {
-	74996, 10224, 768, 24, 160, 264, 10488, 3, 9, 38,
-			    806, 10224, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-75" */
-	{
-		"1024x768-75", {
-	78746, 1024, 768, 16, 112, 288, 1312, 1, 4, 32,
-			    800, 1024, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-90" */
-	{
-		"1024x768-90", {
-	100000, 1024, 768, 0, 96, 288, 1312, 21, 36, 77,
-			    845, 1024, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-100", from /etc/fb.modes */
-/* DISABLED, vsstart == 0
-	{
-		"1024x768-100", {
-	109998, 1024, 768, 0, 88, 368, 1392, 0, 8, 24, 792,
-			    1024, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-*/
-/* Generated mode : "1024x768-100", from ??? */
-	{
-		"1024x768-100", {
-			115500, 1024, 768, 32, 224, 416, 1440, 3, 13, 34, 802, 1024, 0, 8,
-			PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_LOW|
-			PM3VideoControl_VSYNC_ACTIVE_LOW|PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-43-lace" */
-/* INTERLACED NOT SUPPORTED
-  {"1152x864-43-lace", {64998, 1152, 864, 72, 200, 264, 1416, 78, 87, 191, 1055, 1152, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}}, 
-   INTERLACED NOT SUPPORTED */
-/* Generated mode : "1152x864-47-lace" */
-/* INTERLACED NOT SUPPORTED
-  {"1152x864-47-lace", {64998, 1152, 864, 88, 216, 296, 1448, 30, 39, 83, 947, 1152, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}}, 
-   INTERLACED NOT SUPPORTED */
-/* Generated mode : "1152x864-60" */
-	{
-		"1152x864-60", {
-	80000, 1152, 864, 64, 176, 304, 1456, 6, 11, 52,
-			    916, 1152, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-70" */
-	{
-		"1152x864-70", {
-	100000, 1152, 864, 40, 192, 360, 1512, 13, 24, 81,
-			    945, 1152, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-75" */
-	{
-		"1152x864-75", {
-	109998, 1152, 864, 24, 168, 312, 1464, 45, 53, 138,
-			    1002, 1152, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-80" */
-	{
-		"1152x864-80", {
-	109998, 1152, 864, 16, 128, 288, 1440, 30, 37, 94,
-			    958, 1152, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-43-lace" */
-/* INTERLACED NOT SUPPORTED
-  {"1280x1024-43-lace", {80000, 1024, 1024, 80, 160, 320, 1344, 50, 60, 125, 1149, 1024, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}}, 
-   INTERLACED NOT SUPPORTED */
-/* Generated mode : "1280x1024-47-lace" */
-/* INTERLACED NOT SUPPORTED
-  {"1280x1024-47-lace", {80000, 1280, 1024, 80, 160, 320, 1600, 1, 11, 29, 1053, 1280, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}}, 
-   INTERLACED NOT SUPPORTED */
-/* Generated mode : "1280x1024-60" */
-	{
-		"1280x1024-60", {
-	107991, 1280, 1024, 48, 160, 408, 1688, 1, 4, 42,
-			    1066, 1280, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-70" */
-	{
-		"1280x1024-70", {
-	125992, 1280, 1024, 80, 192, 408, 1688, 1, 6, 42,
-			    1066, 1280, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-74" */
-	{
-		"1280x1024-74", {
-	134989, 1280, 1024, 32, 176, 432, 1712, 0, 30, 40,
-			    1064, 1280, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-75" */
-	{
-		"1280x1024-75", {
-	134989, 1280, 1024, 16, 160, 408, 1688, 1, 4, 42,
-			    1066, 1280, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_HIGH
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_HIGH
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1600x1200-60" */
-	{
-		"1600x1200-60", {
-	155981, 1600, 1200, 32, 192, 448, 2048, 10, 18, 70,
-			    1270, 1600, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1600x1200-66" */
-	{
-		"1600x1200-66", {
-	171998, 1600, 1200, 40, 176, 480, 2080, 3, 6, 53,
-			    1253, 1600, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1600x1200-76" */
-	{
-		"1600x1200-76", {
-	197980, 1600, 1200, 40, 176, 480, 2080, 3, 8, 50,
-			    1250, 1600, 0, 8,
-			    PM3VideoControl_ENABLE |
-			    PM3VideoControl_HSYNC_ACTIVE_LOW
-			    |
-			    PM3VideoControl_VSYNC_ACTIVE_LOW
-			    | PM3VideoControl_PIXELSIZE_8BIT}},
-/* ##### end of auto-generated mode */
-	{
-	"\0",}
-};
 
-/* more mandatory stuff (see skeletonfb.c + framebuffer driver HOWTO */
-static struct pm3fb_info fb_info[PM3_MAX_BOARD];
-static struct pm3fb_par current_par[PM3_MAX_BOARD];
-static int current_par_valid[PM3_MAX_BOARD];
-/* to allow explicit filtering of board */
-short bus[PM3_MAX_BOARD];
-short slot[PM3_MAX_BOARD];
-short func[PM3_MAX_BOARD];
-short disable[PM3_MAX_BOARD];
-short noaccel[PM3_MAX_BOARD];
-char fontn[PM3_MAX_BOARD][PM3_FONTNAME_SIZE];
-short depth[PM3_MAX_BOARD];
-short flatpanel[PM3_MAX_BOARD];
-static struct display disp[PM3_MAX_BOARD];
-static char g_options[PM3_OPTIONS_SIZE] __initdata = "pm3fb,dummy";
-short printtimings = 0;
-short forcesize[PM3_MAX_BOARD];
-
-/* ********************* */
-/* ***** prototype ***** */
-/* ********************* */
-/* card-specific */
-static void pm3fb_j2000_setup(struct pm3fb_info *l_fb_info);
-/* permedia3-specific */
-static pm3fb_timing_result pm3fb_preserve_memory_timings(struct pm3fb_info *l_fb_info);
-static pm3fb_timing_result pm3fb_try_memory_timings(struct pm3fb_info *l_fb_info);
-static void pm3fb_write_memory_timings(struct pm3fb_info *l_fb_info);
-static unsigned long pm3fb_read_dac_reg(struct pm3fb_info *l_fb_info,
-					unsigned long r);
-static unsigned long pm3fb_CalculateClock(struct pm3fb_info *l_fb_info, unsigned long reqclock,	/* In kHz units */
-					  unsigned long refclock,	/* In kHz units */
-					  unsigned char *prescale,	/* ClkPreScale */
-					  unsigned char *feedback,	/* ClkFeedBackScale */
-					  unsigned char *postscale
-					  /* ClkPostScale */ );
-static void pm3fb_clear_memory(struct pm3fb_info *l_fb_info, u32 cc);
-static void pm3fb_clear_colormap(struct pm3fb_info *l_fb_info, unsigned char r, unsigned char g, unsigned char b);
-static void pm3fb_common_init(struct pm3fb_info *l_fb_info);
-static int pm3fb_Shiftbpp(struct pm3fb_info *l_fb_info,
-			  unsigned long depth, int v);
-static int pm3fb_Unshiftbpp(struct pm3fb_info *l_fb_info,
-			    unsigned long depth, int v);
-static void pm3fb_mapIO(struct pm3fb_info *l_fb_info);
-static void pm3fb_unmapIO(struct pm3fb_info *l_fb_info);
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
-static void pm3fb_show_cur_mode(struct pm3fb_info *l_fb_info);
-#endif
-static void pm3fb_show_cur_timing(struct pm3fb_info *l_fb_info);
-static void pm3fb_write_mode(struct pm3fb_info *l_fb_info);
-static void pm3fb_read_mode(struct pm3fb_info *l_fb_info,
-			    struct pm3fb_par *curpar);
-static unsigned long pm3fb_size_memory(struct pm3fb_info *l_fb_info);
-/* accelerated permedia3-specific */
-#ifdef PM3FB_USE_ACCEL
-static void pm3fb_wait_pm3(struct pm3fb_info *l_fb_info);
-static void pm3fb_init_engine(struct pm3fb_info *l_fb_info);
-#ifdef FBCON_HAS_CFB32
-static void pm3fb_cfb32_clear(struct vc_data *conp,
-			      struct display *p,
-			      int sy, int sx, int height, int width);
-static void pm3fb_cfb32_clear_margins(struct vc_data *conp,
-				      struct display *p, int bottom_only);
-#endif /* FBCON_HAS_CFB32 */
-#ifdef FBCON_HAS_CFB16
-static void pm3fb_cfb16_clear(struct vc_data *conp,
-			      struct display *p,
-			      int sy, int sx, int height, int width);
-static void pm3fb_cfb16_clear_margins(struct vc_data *conp,
-				      struct display *p, int bottom_only);
-#endif /* FBCON_HAS_CFB16 */
-#ifdef FBCON_HAS_CFB8
-static void pm3fb_cfb8_clear(struct vc_data *conp,
-			     struct display *p,
-			     int sy, int sx, int height, int width);
-static void pm3fb_cfb8_clear_margins(struct vc_data *conp,
-				     struct display *p, int bottom_only);
-#endif /* FBCON_HAS_CFB8 */
-#if defined(FBCON_HAS_CFB8) || defined(FBCON_HAS_CFB16) || defined(FBCON_HAS_CFB32)
-static void pm3fb_cfbX_bmove(struct display *p,
-			     int sy, int sx,
-			     int dy, int dx, int height, int width);
-static void pm3fb_cfbX_putc(struct vc_data *conp, struct display *p,
-			    int c, int yy, int xx);
-static void pm3fb_cfbX_putcs(struct vc_data *conp, struct display *p,
-			     const unsigned short *s, int count, int yy,
-			     int xx);
-static void pm3fb_cfbX_revc(struct display *p, int xx, int yy);
-#endif /* FBCON_HAS_CFB8 || FBCON_HAS_CFB16 || FBCON_HAS_CFB32 */
-#endif /* PM3FB_USE_ACCEL */
-/* pre-init */
-static void pm3fb_mode_setup(char *mode, unsigned long board_num);
-static void pm3fb_pciid_setup(char *pciid, unsigned long board_num);
-static char *pm3fb_boardnum_setup(char *options, unsigned long *bn);
-static void pm3fb_real_setup(char *options);
-/* fbdev */
-static int pm3fb_encode_fix(struct fb_fix_screeninfo *fix,
-			    const void *par, struct fb_info_gen *info);
-static int pm3fb_decode_var(const struct fb_var_screeninfo *var,
-			    void *par, struct fb_info_gen *info);
-static void pm3fb_encode_depth(struct fb_var_screeninfo *var, long d);
-static int pm3fb_encode_var(struct fb_var_screeninfo *var,
-			    const void *par, struct fb_info_gen *info);
-static void pm3fb_get_par(void *par, struct fb_info_gen *info);
-static void pm3fb_set_par(const void *par, struct fb_info_gen *info);
-static void pm3fb_set_color(struct pm3fb_info *l_fb_info,
-			    unsigned char regno, unsigned char r,
-			    unsigned char g, unsigned char b);
-static int pm3fb_getcolreg(unsigned regno, unsigned *red, unsigned *green,
-			   unsigned *blue, unsigned *transp,
-			   struct fb_info *info);
-static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			   unsigned blue, unsigned transp,
-			   struct fb_info *info);
-static int pm3fb_blank(int blank_mode, struct fb_info_gen *info);
-static void pm3fb_set_disp(const void *par, struct display *disp,
-			   struct fb_info_gen *info);
-static void pm3fb_detect(void);
-static int pm3fb_pan_display(const struct fb_var_screeninfo *var,
-			     struct fb_info_gen *info);
-static int pm3fb_ioctl(struct fb_info *info, u_int cmd, u_long arg);
-
-
-/* the struct that hold them together */
-struct fbgen_hwswitch pm3fb_switch = {
-	pm3fb_detect, pm3fb_encode_fix, pm3fb_decode_var, pm3fb_encode_var,
-	pm3fb_get_par, pm3fb_set_par, pm3fb_getcolreg, 
-	pm3fb_pan_display, pm3fb_blank, pm3fb_set_disp
-};
+/*
+ * Driver data
+ */
+static char *mode_option __devinitdata;
 
-static struct fb_ops pm3fb_ops = {
-	.owner =	THIS_MODULE,
-	.fb_get_fix =	fbgen_get_fix,
-	.fb_get_var =	fbgen_get_var,
-	.fb_set_var =	fbgen_set_var,
-	.fb_get_cmap =	fbgen_get_cmap,
-	.fb_set_cmap =	fbgen_set_cmap,
-	.fb_setcolreg =	pm3fb_setcolreg,
-	.fb_pan_display =fbgen_pan_display,
-	.fb_blank =	fbgen_blank,
-	.fb_ioctl =	pm3fb_ioctl,
-};
+/*
+ *  If your driver supports multiple boards, you should make the
+ *  below data types arrays, or allocate them dynamically (using kmalloc()).
+ */
 
-#ifdef PM3FB_USE_ACCEL
-#ifdef FBCON_HAS_CFB32
-static struct display_switch pm3fb_cfb32 = {
-	fbcon_cfb32_setup, pm3fb_cfbX_bmove, pm3fb_cfb32_clear,
-	pm3fb_cfbX_putc, pm3fb_cfbX_putcs, pm3fb_cfbX_revc,
-	NULL /* cursor() */ , NULL /* set_font() */ ,
-	pm3fb_cfb32_clear_margins,
-	FONTWIDTHRANGE(1, 16)	/* true only if accelerated... */
-};
-#endif /* FBCON_HAS_CFB32 */
-#ifdef FBCON_HAS_CFB16
-static struct display_switch pm3fb_cfb16 = {
-	fbcon_cfb16_setup, pm3fb_cfbX_bmove, pm3fb_cfb16_clear,
-	pm3fb_cfbX_putc, pm3fb_cfbX_putcs, pm3fb_cfbX_revc,
-	NULL /* cursor() */ , NULL /* set_font() */ ,
-	pm3fb_cfb16_clear_margins,
-	FONTWIDTHRANGE(1, 16)	/* true only if accelerated... */
-};
-#endif /* FBCON_HAS_CFB16 */
-#ifdef FBCON_HAS_CFB8
-static struct display_switch pm3fb_cfb8 = {
-	fbcon_cfb8_setup, pm3fb_cfbX_bmove, pm3fb_cfb8_clear,
-	pm3fb_cfbX_putc, pm3fb_cfbX_putcs, pm3fb_cfbX_revc,
-	NULL /* cursor() */ , NULL /* set_font() */ ,
-	pm3fb_cfb8_clear_margins,
-	FONTWIDTHRANGE(1, 16)	/* true only if accelerated... */
-};
-#endif /* FBCON_HAS_CFB8 */
-#endif /* PM3FB_USE_ACCEL */
-
-/* ****************************** */
-/* ***** card-specific data ***** */
-/* ****************************** */
-struct pm3fb_card_timings {
-	unsigned long memsize; /* 0 for last value (i.e. default) */
-	struct pm3fb_timings memt;
+/*
+ * This structure defines the hardware state of the graphics card. Normally
+ * you place this in a header file in linux/include/video. This file usually
+ * also includes register information. That allows other driver subsystems
+ * and userland applications the ability to use the same header file to
+ * avoid duplicate work and easy porting of software.
+ */
+struct pm3_par {
+	unsigned char	__iomem *v_regs;/* virtual address of p_regs */
+	u32		video;		/* video flags before blanking */
+	u32		base;		/* screen base (xoffset+yoffset) in 128 bits unit */
+	u32 		palette[16];
 };
 
-static struct pm3fb_card_timings t_FormacProFormance3[] = {
-	{ 16, { 0x02e311b8, 0x06100205, 0x08000002, 0x00000079, 0x00000000} },
-	{ 0, { 0x02e311b8, 0x06100205, 0x08000002, 0x00000079, 0x00000000} } /* from 16 MB PF3 */
+/*
+ * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
+ * if we don't use modedb. If we do use modedb see pm3fb_init how to use it
+ * to get a fb_var_screeninfo. Otherwise define a default var as well.
+ */
+static struct fb_fix_screeninfo pm3fb_fix __devinitdata = {
+	.id =		"Permedia3",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_PSEUDOCOLOR,
+	.xpanstep =	1,
+	.ypanstep =	1,
+	.ywrapstep =	0,
+	.accel =	FB_ACCEL_NONE,
 };
 
-static struct pm3fb_card_timings t_AppianJeronimo2000[] = {
-	{ 32, { 0x02e311B8, 0x07424905, 0x0c000003, 0x00000061, 0x00000000} },
-	{ 0, { 0x02e311B8, 0x07424905, 0x0c000003, 0x00000061, 0x00000000} } /* from 32MB J2000 */
-};
+/*
+ * Utility functions
+ */
 
-static struct pm3fb_card_timings t_3DLabsOxygenVX1[] = {
-	{ 32, { 0x30e311b8, 0x08501204, 0x08000002, 0x0000006b, 0x00000000} },
-	{ 0, { 0x30e311b8, 0x08501204, 0x08000002, 0x0000006b, 0x00000000} } /* from 32MB VX1 */
-};
+static inline u32 PM3_READ_REG(struct pm3_par *par, s32 off)
+{
+	return fb_readl(par->v_regs + off);
+}
 
-static struct {
-		char cardname[32]; /* recognized card name */
-		u16 subvendor; /* subvendor of the card */
-		u16 subdevice; /* subdevice of the card */
-		u8  func; /* function of the card to which the extra init apply */
-		void (*specific_setup)(struct pm3fb_info *l_fb_info); /* card/func specific setup, done before _any_ FB access */
-	struct pm3fb_card_timings *c_memt; /* defauls timings for the boards */
-} cardbase[] = {
-	{ "Unknown Permedia3 board", 0xFFFF, 0xFFFF, 0xFF, NULL, NULL },
-	{ "Appian Jeronimo 2000 head 1", 0x1097, 0x3d32, 1, NULL,
-	  t_AppianJeronimo2000
-	},
-	{ "Appian Jeronimo 2000 head 2", 0x1097, 0x3d32, 2, pm3fb_j2000_setup,
-	  t_AppianJeronimo2000
-	},
-	{ "Formac ProFormance 3", PCI_VENDOR_ID_3DLABS, 0x000a, 0, NULL, /* Formac use 3DLabs ID ?!? */
-	  t_FormacProFormance3
-	},
-	{ "3DLabs Permedia3 Create!", PCI_VENDOR_ID_3DLABS, 0x0127, 0, NULL, NULL },
-	{ "3DLabs Oxygen VX1 PCI", PCI_VENDOR_ID_3DLABS, 0x0121, 0, NULL,
-	  t_3DLabsOxygenVX1
-	},
-	{ "3DLabs Oxygen VX1 AGP", PCI_VENDOR_ID_3DLABS, 0x0125, 0, NULL, NULL },
-	{ "3DLabs Oxygen VX1-16 AGP", PCI_VENDOR_ID_3DLABS, 0x0140, 0, NULL, NULL },
-	{ "3DLabs Oxygen VX1-1600SW PCI", PCI_VENDOR_ID_3DLABS, 0x0800, 0, NULL, NULL },
-	{ "\0", 0x0, 0x0, 0, NULL, NULL }
-};
+static inline void PM3_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
+{
+	fb_writel(v, par->v_regs + off);
+}
 
-/* ********************************** */
-/* ***** card-specific function ***** */
-/* ********************************** */
-static void pm3fb_j2000_setup(struct pm3fb_info *l_fb_info)
-{       /* the appian j2000 require more initialization of the second head */
-	/* l_fb_info must point to the _second_ head of the J2000 */
-	
-	DTRACE;
-
-	l_fb_info->memt = t_AppianJeronimo2000[0].memt; /* 32 MB, first and only j2000 ? */
-	
-	pm3fb_write_memory_timings(l_fb_info);
+static inline void PM3_WAIT(struct pm3_par *par, u32 n)
+{
+	while (PM3_READ_REG(par, PM3InFIFOSpace) < n);
 }
 
-/* *************************************** */
-/* ***** permedia3-specific function ***** */
-/* *************************************** */
-static pm3fb_timing_result pm3fb_preserve_memory_timings(struct pm3fb_info *l_fb_info)
+static inline void PM3_SLOW_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
 {
-	l_fb_info->memt.caps = PM3_READ_REG(PM3LocalMemCaps);
-	l_fb_info->memt.timings = PM3_READ_REG(PM3LocalMemTimings);
-	l_fb_info->memt.control = PM3_READ_REG(PM3LocalMemControl);
-	l_fb_info->memt.refresh = PM3_READ_REG(PM3LocalMemRefresh);
-	l_fb_info->memt.powerdown = PM3_READ_REG(PM3LocalMemPowerDown);
-
-	if ((l_fb_info->memt.caps == PM3FB_UNKNOWN_TIMING_VALUE) ||
-	    (l_fb_info->memt.timings == PM3FB_UNKNOWN_TIMING_VALUE) ||
-	    (l_fb_info->memt.control == PM3FB_UNKNOWN_TIMING_VALUE) ||
-	    (l_fb_info->memt.refresh == PM3FB_UNKNOWN_TIMING_VALUE) ||
-	    (l_fb_info->memt.powerdown == PM3FB_UNKNOWN_TIMING_VALUE))
-	{
-		printk(KERN_ERR "pm3fb: invalid memory timings in permedia3 board #%ld\n", l_fb_info->board_num);
-		return(pm3fb_try_memory_timings(l_fb_info));
+	if (par->v_regs) {
+		mb();
+		PM3_WAIT(par, 1);
+		wmb();
+		PM3_WRITE_REG(par, off, v);
 	}
-	return(pm3fb_timing_ok);
 }
 
-static pm3fb_timing_result pm3fb_try_memory_timings(struct pm3fb_info *l_fb_info)
+static inline void PM3_SET_INDEX(struct pm3_par *par, unsigned index)
 {
-	if (cardbase[l_fb_info->board_type].c_memt)
-	{
-		int i = 0, done = 0;
-		while (!done)
-		{
-			if ((cardbase[l_fb_info->board_type].c_memt[i].memsize == l_fb_info->fb_size)
-			    || !(cardbase[l_fb_info->board_type].c_memt[i].memsize))
-			{ /* will use the 0-sized timings by default */
-				done = 1;
-				l_fb_info->memt = cardbase[l_fb_info->board_type].c_memt[i].memt;
-				printk(KERN_WARNING  "pm3fb: trying to use predefined memory timings for permedia3 board #%ld (%s, %ld MB)\n",
-				       l_fb_info->board_num,
-				       cardbase[l_fb_info->board_type].cardname,
-				       cardbase[l_fb_info->board_type].c_memt[i].memsize);
-				pm3fb_write_memory_timings(l_fb_info);
-				return(pm3fb_timing_retry);
-			}
-			i++;
-		}
-	} else
-		return(pm3fb_timing_problem);
-	return(pm3fb_timing_ok);
+	PM3_SLOW_WRITE_REG(par, PM3RD_IndexHigh, (index >> 8) & 0xff);
+	PM3_SLOW_WRITE_REG(par, PM3RD_IndexLow, index & 0xff);
 }
 
-static void pm3fb_write_memory_timings(struct pm3fb_info *l_fb_info)
+static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
 {
-	unsigned char m, n, p;
-	unsigned long clockused;
-	
-	PM3_SLOW_WRITE_REG(PM3LocalMemCaps, l_fb_info->memt.caps);
-	PM3_SLOW_WRITE_REG(PM3LocalMemTimings, l_fb_info->memt.timings);
-	PM3_SLOW_WRITE_REG(PM3LocalMemControl, l_fb_info->memt.control);
-	PM3_SLOW_WRITE_REG(PM3LocalMemRefresh, l_fb_info->memt.refresh);
-	PM3_SLOW_WRITE_REG(PM3LocalMemPowerDown, l_fb_info->memt.powerdown);
-
-	clockused =
-	    pm3fb_CalculateClock(l_fb_info, 2 * 105000, PM3_REF_CLOCK, &m,
-				 &n, &p);
-
-	PM3_WRITE_DAC_REG(PM3RD_KClkPreScale, m);
-	PM3_WRITE_DAC_REG(PM3RD_KClkFeedbackScale, n);
-	PM3_WRITE_DAC_REG(PM3RD_KClkPostScale, p);
-	PM3_WRITE_DAC_REG(PM3RD_KClkControl,
-			  PM3RD_KClkControl_STATE_RUN |
-			  PM3RD_KClkControl_SOURCE_PLL |
-			  PM3RD_KClkControl_ENABLE);
-	PM3_WRITE_DAC_REG(PM3RD_MClkControl,
-			  PM3RD_MClkControl_STATE_RUN |
-			  PM3RD_MClkControl_SOURCE_KCLK |
-			  PM3RD_MClkControl_ENABLE);
-	PM3_WRITE_DAC_REG(PM3RD_SClkControl,
-			  PM3RD_SClkControl_STATE_RUN |
-			  PM3RD_SClkControl_SOURCE_PCLK |
-			  PM3RD_SClkControl_ENABLE);
+	PM3_SET_INDEX(par, r);
+	wmb();
+	PM3_WRITE_REG(par, PM3RD_IndexedData, v);
 }
 
-static unsigned long pm3fb_read_dac_reg(struct pm3fb_info *l_fb_info,
-					unsigned long r)
+static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno,
+			unsigned char r, unsigned char g, unsigned char b)
 {
-	DASSERT((l_fb_info->vIOBase != (unsigned char *) (-1)),
-		"l_fb_info->vIOBase mapped in read dac reg\n");
-	PM3_SET_INDEX(r);
-	mb();
-	return (PM3_READ_REG(PM3RD_IndexedData));
+	PM3_SLOW_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
+	PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, r);
+	PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, g);
+	PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, b);
+}
+
+static void pm3fb_clear_colormap(struct pm3_par *par,
+			unsigned char r, unsigned char g, unsigned char b)
+{
+	int i;
+
+	for (i = 0; i < 256 ; i++) /* fill color map with white */
+		pm3fb_set_color(par, i, r, g, b);
+
 }
 
 /* Calculating various clock parameter */
-static unsigned long pm3fb_CalculateClock(struct pm3fb_info *l_fb_info, unsigned long reqclock,	/* In kHz units */
-					  unsigned long refclock,	/* In kHz units */
-					  unsigned char *prescale,	/* ClkPreScale */
-					  unsigned char *feedback,	/* ClkFeedBackScale */
-					  unsigned char *postscale
-					  /* ClkPostScale */ )
+static void pm3fb_calculate_clock(unsigned long reqclock,
+				unsigned char *prescale,
+				unsigned char *feedback,
+				unsigned char *postscale)
 {
 	int f, pre, post;
 	unsigned long freq;
 	long freqerr = 1000;
-	unsigned long actualclock = 0;
-
-	DTRACE;
+	long currerr;
 
 	for (f = 1; f < 256; f++) {
 		for (pre = 1; pre < 256; pre++) {
 			for (post = 0; post < 5; post++) {
-				freq =
-				    ((2 * refclock * f) /
-				     (pre * (1 << post)));
-				if ((reqclock > freq - freqerr)
-				    && (reqclock < freq + freqerr)) {
-					freqerr =
-					    (reqclock >
-					     freq) ? reqclock -
-					    freq : freq - reqclock;
+				freq = ((2*PM3_REF_CLOCK * f) >> post) / pre;
+				currerr = (reqclock > freq)
+					? reqclock - freq
+					: freq - reqclock;
+				if (currerr < freqerr) {
+					freqerr = currerr;
 					*feedback = f;
 					*prescale = pre;
 					*postscale = post;
-					actualclock = freq;
 				}
 			}
 		}
 	}
-
-	return (actualclock);
 }
 
-static int pm3fb_Shiftbpp(struct pm3fb_info *l_fb_info,
-			  unsigned long depth, int v)
+static inline int pm3fb_shift_bpp(unsigned long depth, int v)
 {
-	DTRACE;
-	
 	switch (depth) {
 	case 8:
 		return (v >> 4);
@@ -918,181 +187,59 @@ static int pm3fb_Shiftbpp(struct pm3fb_info *l_fb_info,
 	case 32:
 		return (v >> 2);
 	}
-	DPRINTK(1, "Unsupported depth %ld\n", depth);
-	return (0);
-}
-
-static int pm3fb_Unshiftbpp(struct pm3fb_info *l_fb_info,
-			    unsigned long depth, int v)
-{
-	DTRACE;
-
-	switch (depth) {
-	case 8:
-		return (v << 4);
-	case 12:	
-	case 15:
-	case 16:
-		return (v << 3);
-	case 32:
-		return (v << 2);
-	}
-	DPRINTK(1, "Unsupported depth %ld\n", depth);
-	return (0);
-}
-
-static void pm3fb_mapIO(struct pm3fb_info *l_fb_info)
-{
-	DTRACE;
-
-	l_fb_info->vIOBase =
-	    ioremap((unsigned long) l_fb_info->pIOBase, PM3_REGS_SIZE);
-	l_fb_info->v_fb =
-	    ioremap((unsigned long) l_fb_info->p_fb, l_fb_info->fb_size);
-	DPRINTK(2, "IO mapping : IOBase %lx / %lx, fb %lx / %lx\n",
-		(unsigned long) l_fb_info->pIOBase,
-		(unsigned long) l_fb_info->vIOBase,
-		(unsigned long) l_fb_info->p_fb,
-		(unsigned long) l_fb_info->v_fb);
-}
-
-static void pm3fb_unmapIO(struct pm3fb_info *l_fb_info)
-{
-	DTRACE;
-
-	iounmap(l_fb_info->vIOBase);
-	iounmap(l_fb_info->v_fb);
-	l_fb_info->vIOBase = (unsigned char *) -1;
-	l_fb_info->v_fb = (unsigned char *) -1;
-}
-
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
-static void pm3fb_show_cur_mode(struct pm3fb_info *l_fb_info)
-{
-	DPRINTK(2, "PM3Aperture0: 0x%08x\n", PM3_READ_REG(PM3Aperture0));
-	DPRINTK(2, "PM3Aperture1: 0x%08x\n", PM3_READ_REG(PM3Aperture1));
-	DPRINTK(2, "PM3ByAperture1Mode: 0x%08x\n",
-		PM3_READ_REG(PM3ByAperture1Mode));
-	DPRINTK(2, "PM3ByAperture2Mode: 0x%08x\n",
-		PM3_READ_REG(PM3ByAperture2Mode));
-	DPRINTK(2, "PM3ChipConfig: 0x%08x\n", PM3_READ_REG(PM3ChipConfig));
-	DPRINTK(2, "PM3FIFODis: 0x%08x\n", PM3_READ_REG(PM3FIFODis));
-	DPRINTK(2, "PM3HTotal: 0x%08x\n", PM3_READ_REG(PM3HTotal));
-	DPRINTK(2, "PM3HbEnd: 0x%08x\n", PM3_READ_REG(PM3HbEnd));
-	DPRINTK(2, "PM3HgEnd: 0x%08x\n", PM3_READ_REG(PM3HgEnd));
-	DPRINTK(2, "PM3HsEnd: 0x%08x\n", PM3_READ_REG(PM3HsEnd));
-	DPRINTK(2, "PM3HsStart: 0x%08x\n", PM3_READ_REG(PM3HsStart));
-	DPRINTK(2, "PM3MemBypassWriteMask: 0x%08x\n",
-		PM3_READ_REG(PM3MemBypassWriteMask));
-	DPRINTK(2, "PM3RD_IndexControl: 0x%08x\n",
-		PM3_READ_REG(PM3RD_IndexControl));
-	DPRINTK(2, "PM3ScreenBase: 0x%08x\n", PM3_READ_REG(PM3ScreenBase));
-	DPRINTK(2, "PM3ScreenStride: 0x%08x\n",
-		PM3_READ_REG(PM3ScreenStride));
-	DPRINTK(2, "PM3VClkCtl: 0x%08x\n", PM3_READ_REG(PM3VClkCtl));
-	DPRINTK(2, "PM3VTotal: 0x%08x\n", PM3_READ_REG(PM3VTotal));
-	DPRINTK(2, "PM3VbEnd: 0x%08x\n", PM3_READ_REG(PM3VbEnd));
-	DPRINTK(2, "PM3VideoControl: 0x%08x\n",
-		PM3_READ_REG(PM3VideoControl));
-	DPRINTK(2, "PM3VsEnd: 0x%08x\n", PM3_READ_REG(PM3VsEnd));
-	DPRINTK(2, "PM3VsStart: 0x%08x\n", PM3_READ_REG(PM3VsStart));
-
-	DPRINTK(2, "PM3RD_ColorFormat: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_ColorFormat));
-	DPRINTK(2, "PM3RD_DACControl: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_DACControl));
-	DPRINTK(2, "PM3RD_DClk0FeedbackScale: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_DClk0FeedbackScale));
-	DPRINTK(2, "PM3RD_DClk0PostScale: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_DClk0PostScale));
-	DPRINTK(2, "PM3RD_DClk0PreScale: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_DClk0PreScale));
-	DPRINTK(2, "[not set] PM3RD_IndexControl: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_IndexControl));
-	DPRINTK(2, "PM3RD_MiscControl: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_MiscControl));
-	DPRINTK(2, "PM3RD_PixelSize: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_PixelSize));
-	DPRINTK(2, "PM3RD_SyncControl: %ld\n",
-		PM3_READ_DAC_REG(PM3RD_SyncControl));
-}
-
-#endif /* defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2) */
-static void pm3fb_show_cur_timing(struct pm3fb_info *l_fb_info)
-{
-	u16 subvendor, subdevice;
-
-	if ((!pci_read_config_word
-	     (l_fb_info->dev, PCI_SUBSYSTEM_VENDOR_ID, &subvendor))
-	    &&
-	    (!pci_read_config_word
-	     (l_fb_info->dev, PCI_SUBSYSTEM_ID, &subdevice))) {
-		/* well, nothing... */
-	} else {
-		subvendor = subdevice = (u16)-1;
-	}
-
-	printk(KERN_INFO "pm3fb: memory timings for board #%ld (subvendor: 0x%hx, subdevice: 0x%hx)\n", l_fb_info->board_num, subvendor, subdevice);
-	printk(KERN_INFO " PM3LocalMemCaps: 0x%08x\n",
-	       PM3_READ_REG(PM3LocalMemCaps));
-	printk(KERN_INFO " PM3LocalMemTimings: 0x%08x\n",
-	       PM3_READ_REG(PM3LocalMemTimings));
-	printk(KERN_INFO " PM3LocalMemControl: 0x%08x\n",
-	       PM3_READ_REG(PM3LocalMemControl));
-	printk(KERN_INFO " PM3LocalMemRefresh: 0x%08x\n",
-	       PM3_READ_REG(PM3LocalMemRefresh));
-	printk(KERN_INFO " PM3LocalMemPowerDown: 0x%08x\n",
-	       PM3_READ_REG(PM3LocalMemPowerDown));
+	DPRINTK("Unsupported depth %ld\n", depth);
+	return 0;
 }
 
 /* write the mode to registers */
-static void pm3fb_write_mode(struct pm3fb_info *l_fb_info)
+static void pm3fb_write_mode(struct fb_info *info)
 {
+	struct pm3_par *par = info->par;
 	char tempsync = 0x00, tempmisc = 0x00;
-	DTRACE;
-
-	PM3_SLOW_WRITE_REG(PM3MemBypassWriteMask, 0xffffffff);
-	PM3_SLOW_WRITE_REG(PM3Aperture0, 0x00000000);
-	PM3_SLOW_WRITE_REG(PM3Aperture1, 0x00000000);
-	PM3_SLOW_WRITE_REG(PM3FIFODis, 0x00000007);
-
-	PM3_SLOW_WRITE_REG(PM3HTotal,
-			   pm3fb_Shiftbpp(l_fb_info,
-					  l_fb_info->current_par->depth,
-					  l_fb_info->current_par->htotal -
-					  1));
-	PM3_SLOW_WRITE_REG(PM3HsEnd,
-			   pm3fb_Shiftbpp(l_fb_info,
-					  l_fb_info->current_par->depth,
-					  l_fb_info->current_par->hsend));
-	PM3_SLOW_WRITE_REG(PM3HsStart,
-			   pm3fb_Shiftbpp(l_fb_info,
-					  l_fb_info->current_par->depth,
-					  l_fb_info->current_par->
+	const u32 hsstart = info->var.right_margin;
+	const u32 hsend = hsstart + info->var.hsync_len;
+	const u32 hbend = hsend + info->var.left_margin;
+	const u32 xres = (info->var.xres + 31) & ~31;
+	const u32 htotal = xres + hbend;
+	const u32 vsstart = info->var.lower_margin;
+	const u32 vsend = vsstart + info->var.vsync_len;
+	const u32 vbend = vsend + info->var.upper_margin;
+	const u32 vtotal = info->var.yres + vbend;
+	const u32 width = (info->var.xres_virtual + 7) & ~7;
+
+	PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
+	PM3_SLOW_WRITE_REG(par, PM3Aperture0, 0x00000000);
+	PM3_SLOW_WRITE_REG(par, PM3Aperture1, 0x00000000);
+	PM3_SLOW_WRITE_REG(par, PM3FIFODis, 0x00000007);
+
+	PM3_SLOW_WRITE_REG(par, PM3HTotal,
+			   pm3fb_shift_bpp(info->var.bits_per_pixel,
+					  htotal - 1));
+	PM3_SLOW_WRITE_REG(par, PM3HsEnd,
+			   pm3fb_shift_bpp(info->var.bits_per_pixel,
+					  hsend));
+	PM3_SLOW_WRITE_REG(par, PM3HsStart,
+			   pm3fb_shift_bpp(info->var.bits_per_pixel,
 					  hsstart));
-	PM3_SLOW_WRITE_REG(PM3HbEnd,
-			   pm3fb_Shiftbpp(l_fb_info,
-					  l_fb_info->current_par->depth,
-					  l_fb_info->current_par->hbend));
-	PM3_SLOW_WRITE_REG(PM3HgEnd,
-			   pm3fb_Shiftbpp(l_fb_info,
-					  l_fb_info->current_par->depth,
-					  l_fb_info->current_par->hbend));
-	PM3_SLOW_WRITE_REG(PM3ScreenStride,
-			   pm3fb_Shiftbpp(l_fb_info,
-					  l_fb_info->current_par->depth,
-					  l_fb_info->current_par->stride));
-	PM3_SLOW_WRITE_REG(PM3VTotal, l_fb_info->current_par->vtotal - 1);
-	PM3_SLOW_WRITE_REG(PM3VsEnd, l_fb_info->current_par->vsend - 1);
-	PM3_SLOW_WRITE_REG(PM3VsStart,
-			   l_fb_info->current_par->vsstart - 1);
-	PM3_SLOW_WRITE_REG(PM3VbEnd, l_fb_info->current_par->vbend);
-
-	switch (l_fb_info->current_par->depth) {
+	PM3_SLOW_WRITE_REG(par, PM3HbEnd,
+			   pm3fb_shift_bpp(info->var.bits_per_pixel,
+					  hbend));
+	PM3_SLOW_WRITE_REG(par, PM3HgEnd,
+			   pm3fb_shift_bpp(info->var.bits_per_pixel,
+					  hbend));
+	PM3_SLOW_WRITE_REG(par, PM3ScreenStride,
+			   pm3fb_shift_bpp(info->var.bits_per_pixel,
+					  width));
+	PM3_SLOW_WRITE_REG(par, PM3VTotal, vtotal - 1);
+	PM3_SLOW_WRITE_REG(par, PM3VsEnd, vsend - 1);
+	PM3_SLOW_WRITE_REG(par, PM3VsStart, vsstart - 1);
+	PM3_SLOW_WRITE_REG(par, PM3VbEnd, vbend);
+
+	switch (info->var.bits_per_pixel) {
 	case 8:
-		PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
 				   PM3ByApertureMode_PIXELSIZE_8BIT);
-		PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
 				   PM3ByApertureMode_PIXELSIZE_8BIT);
 		break;
 
@@ -1100,15 +247,15 @@ static void pm3fb_write_mode(struct pm3fb_info *l_fb_info)
 	case 15:
 	case 16:
 #ifndef __BIG_ENDIAN
-		PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
 				   PM3ByApertureMode_PIXELSIZE_16BIT);
-		PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
 				   PM3ByApertureMode_PIXELSIZE_16BIT);
 #else
-		PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
 				   PM3ByApertureMode_PIXELSIZE_16BIT |
 				   PM3ByApertureMode_BYTESWAP_BADC);
-		PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
 				   PM3ByApertureMode_PIXELSIZE_16BIT |
 				   PM3ByApertureMode_BYTESWAP_BADC);
 #endif /* ! __BIG_ENDIAN */
@@ -1116,23 +263,23 @@ static void pm3fb_write_mode(struct pm3fb_info *l_fb_info)
 
 	case 32:
 #ifndef __BIG_ENDIAN
-		PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
 				   PM3ByApertureMode_PIXELSIZE_32BIT);
-		PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
 				   PM3ByApertureMode_PIXELSIZE_32BIT);
 #else
-		PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
 				   PM3ByApertureMode_PIXELSIZE_32BIT |
 				   PM3ByApertureMode_BYTESWAP_DCBA);
-		PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+		PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
 				   PM3ByApertureMode_PIXELSIZE_32BIT |
 				   PM3ByApertureMode_BYTESWAP_DCBA);
 #endif /* ! __BIG_ENDIAN */
 		break;
 
 	default:
-		DPRINTK(1, "Unsupported depth %d\n",
-			l_fb_info->current_par->depth);
+		DPRINTK("Unsupported depth %d\n",
+			info->var.bits_per_pixel);
 		break;
 	}
 
@@ -1143,95 +290,86 @@ static void pm3fb_write_mode(struct pm3fb_info *l_fb_info)
 	 * sync options in PM3RD_SyncControl.  --rmk
 	 */
 	{
-		unsigned int video = l_fb_info->current_par->video;
+		unsigned int video = par->video;
 
 		video &= ~(PM3VideoControl_HSYNC_MASK |
 			   PM3VideoControl_VSYNC_MASK);
 		video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
 			 PM3VideoControl_VSYNC_ACTIVE_HIGH;
-		PM3_SLOW_WRITE_REG(PM3VideoControl, video);
+		PM3_SLOW_WRITE_REG(par, PM3VideoControl, video);
 	}
-	PM3_SLOW_WRITE_REG(PM3VClkCtl,
-			   (PM3_READ_REG(PM3VClkCtl) & 0xFFFFFFFC));
-	PM3_SLOW_WRITE_REG(PM3ScreenBase, l_fb_info->current_par->base);
-	PM3_SLOW_WRITE_REG(PM3ChipConfig,
-			   (PM3_READ_REG(PM3ChipConfig) & 0xFFFFFFFD));
+	PM3_SLOW_WRITE_REG(par, PM3VClkCtl,
+			   (PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC));
+	PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+	PM3_SLOW_WRITE_REG(par, PM3ChipConfig,
+			   (PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD));
 
 	{
-		unsigned char m;	/* ClkPreScale */
-		unsigned char n;	/* ClkFeedBackScale */
-		unsigned char p;	/* ClkPostScale */
-		(void)pm3fb_CalculateClock(l_fb_info, l_fb_info->current_par->pixclock, PM3_REF_CLOCK, &m, &n, &p);
-
-		DPRINTK(2,
-			"Pixclock: %d, Pre: %d, Feedback: %d, Post: %d\n",
-			l_fb_info->current_par->pixclock, (int) m, (int) n,
-			(int) p);
-
-		PM3_WRITE_DAC_REG(PM3RD_DClk0PreScale, m);
-		PM3_WRITE_DAC_REG(PM3RD_DClk0FeedbackScale, n);
-		PM3_WRITE_DAC_REG(PM3RD_DClk0PostScale, p);
+		unsigned char uninitialized_var(m);	/* ClkPreScale */
+		unsigned char uninitialized_var(n);	/* ClkFeedBackScale */
+		unsigned char uninitialized_var(p);	/* ClkPostScale */
+		unsigned long pixclock = PICOS2KHZ(info->var.pixclock);
+
+		(void)pm3fb_calculate_clock(pixclock, &m, &n, &p);
+
+		DPRINTK("Pixclock: %ld, Pre: %d, Feedback: %d, Post: %d\n",
+			pixclock, (int) m, (int) n, (int) p);
+
+		PM3_WRITE_DAC_REG(par, PM3RD_DClk0PreScale, m);
+		PM3_WRITE_DAC_REG(par, PM3RD_DClk0FeedbackScale, n);
+		PM3_WRITE_DAC_REG(par, PM3RD_DClk0PostScale, p);
 	}
 	/*
-	   PM3_WRITE_DAC_REG(PM3RD_IndexControl, 0x00);
+	   PM3_WRITE_DAC_REG(par, PM3RD_IndexControl, 0x00);
 	 */
 	/*
-	   PM3_SLOW_WRITE_REG(PM3RD_IndexControl, 0x00);
+	   PM3_SLOW_WRITE_REG(par, PM3RD_IndexControl, 0x00);
 	 */
-	if ((l_fb_info->current_par->video & PM3VideoControl_HSYNC_MASK) ==
+	if ((par->video & PM3VideoControl_HSYNC_MASK) ==
 	    PM3VideoControl_HSYNC_ACTIVE_HIGH)
 		tempsync |= PM3RD_SyncControl_HSYNC_ACTIVE_HIGH;
-	if ((l_fb_info->current_par->video & PM3VideoControl_VSYNC_MASK) ==
+	if ((par->video & PM3VideoControl_VSYNC_MASK) ==
 	    PM3VideoControl_VSYNC_ACTIVE_HIGH)
 		tempsync |= PM3RD_SyncControl_VSYNC_ACTIVE_HIGH;
-	
-	PM3_WRITE_DAC_REG(PM3RD_SyncControl, tempsync);
-	DPRINTK(2, "PM3RD_SyncControl: %d\n", tempsync);
-	
-	if (flatpanel[l_fb_info->board_num])
-	{
-		PM3_WRITE_DAC_REG(PM3RD_DACControl, PM3RD_DACControl_BLANK_PEDESTAL_ENABLE);
-		PM3_WAIT(2);
-		PM3_WRITE_REG(PM3VSConfiguration, 0x06);
-		PM3_WRITE_REG(0x5a00, 1 << 14); /* black magic... */
-		tempmisc = PM3RD_MiscControl_VSB_OUTPUT_ENABLE;
-	}
-	else
-		PM3_WRITE_DAC_REG(PM3RD_DACControl, 0x00);
 
-	switch (l_fb_info->current_par->depth) {
+	PM3_WRITE_DAC_REG(par, PM3RD_SyncControl, tempsync);
+	DPRINTK("PM3RD_SyncControl: %d\n", tempsync);
+
+	PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00);
+
+	switch (info->var.bits_per_pixel) {
 	case 8:
-		PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+		PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 				  PM3RD_PixelSize_8_BIT_PIXELS);
-		PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+		PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 				  PM3RD_ColorFormat_CI8_COLOR |
 				  PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
 		tempmisc |= PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 		break;
 	case 12:
-		PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+		PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 				  PM3RD_PixelSize_16_BIT_PIXELS);
-		PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+		PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 				  PM3RD_ColorFormat_4444_COLOR |
 				  PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
 				  PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
 		tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 			PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
-		break;		
+		break;
 	case 15:
-		PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+		PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 				  PM3RD_PixelSize_16_BIT_PIXELS);
-		PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+		PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 				  PM3RD_ColorFormat_5551_FRONT_COLOR |
 				  PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
 				  PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
 		tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 			PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
-		break;		
+		break;
 	case 16:
-		PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+		PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 				  PM3RD_PixelSize_16_BIT_PIXELS);
-		PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+		PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 				  PM3RD_ColorFormat_565_FRONT_COLOR |
 				  PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
 				  PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
@@ -1239,2396 +377,631 @@ static void pm3fb_write_mode(struct pm3fb_info *l_fb_info)
 			PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 		break;
 	case 32:
-		PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+		PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 				  PM3RD_PixelSize_32_BIT_PIXELS);
-		PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+		PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 				  PM3RD_ColorFormat_8888_COLOR |
 				  PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
 		tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 			PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 		break;
 	}
-	PM3_WRITE_DAC_REG(PM3RD_MiscControl, tempmisc);
-	
-	PM3_SHOW_CUR_MODE;
+	PM3_WRITE_DAC_REG(par, PM3RD_MiscControl, tempmisc);
 }
 
-static void pm3fb_read_mode(struct pm3fb_info *l_fb_info,
-			    struct pm3fb_par *curpar)
-{
-	unsigned long pixsize1, pixsize2, clockused;
-	unsigned long pre, feedback, post;
-
-	DTRACE;
-
-	clockused = PM3_READ_REG(PM3VClkCtl);
+/*
+ * hardware independent functions
+ */
+int pm3fb_init(void);
+int pm3fb_setup(char*);
 
-	switch (clockused) {
-	case 3:
-		pre = PM3_READ_DAC_REG(PM3RD_DClk3PreScale);
-		feedback = PM3_READ_DAC_REG(PM3RD_DClk3FeedbackScale);
-		post = PM3_READ_DAC_REG(PM3RD_DClk3PostScale);
+static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	u32 lpitch;
 
-		DPRINTK(2,
-			"DClk3 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
-			pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
-								feedback,
-								post));
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	switch(var->bits_per_pixel) {
+	case 8:
+		var->red.length = var->green.length = var->blue.length = 8;
+		var->red.offset = var->green.offset = var->blue.offset = 0;
 		break;
-	case 2:
-		pre = PM3_READ_DAC_REG(PM3RD_DClk2PreScale);
-		feedback = PM3_READ_DAC_REG(PM3RD_DClk2FeedbackScale);
-		post = PM3_READ_DAC_REG(PM3RD_DClk2PostScale);
-
-		DPRINTK(2,
-			"DClk2 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
-			pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
-								feedback,
-								post));
+	case 12:
+		var->red.offset   = 8;
+		var->red.length   = 4;
+		var->green.offset = 4;
+		var->green.length = 4;
+		var->blue.offset  = 0;
+		var->blue.length  = 4;
+		var->transp.offset = 12;
+		var->transp.length = 4;
+	case 15:
+		var->red.offset   = 10;
+		var->red.length   = 5;
+		var->green.offset = 5;
+		var->green.length = 5;
+		var->blue.offset  = 0;
+		var->blue.length  = 5;
+		var->transp.offset = 15;
+		var->transp.length = 1;
 		break;
-	case 1:
-		pre = PM3_READ_DAC_REG(PM3RD_DClk1PreScale);
-		feedback = PM3_READ_DAC_REG(PM3RD_DClk1FeedbackScale);
-		post = PM3_READ_DAC_REG(PM3RD_DClk1PostScale);
-
-		DPRINTK(2,
-			"DClk1 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
-			pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
-								feedback,
-								post));
+	case 16:
+		var->red.offset   = 11;
+		var->red.length   = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset  = 0;
+		var->blue.length  = 5;
 		break;
-	case 0:
-		pre = PM3_READ_DAC_REG(PM3RD_DClk0PreScale);
-		feedback = PM3_READ_DAC_REG(PM3RD_DClk0FeedbackScale);
-		post = PM3_READ_DAC_REG(PM3RD_DClk0PostScale);
-
-		DPRINTK(2,
-			"DClk0 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
-			pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
-								feedback,
-								post));
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		var->red.offset	  = 16;
+		var->green.offset = 8;
+		var->blue.offset  = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
 		break;
 	default:
-		pre = feedback = post = 0;
-		DPRINTK(1, "Unknowk D clock used : %ld\n", clockused);
-		break;
+		DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
+		return -EINVAL;
 	}
+	var->height = var->width = -1;
 
-	curpar->pixclock = PM3_SCALE_TO_CLOCK(pre, feedback, post);
-
-	pixsize1 =
-	    PM3ByApertureMode_PIXELSIZE_MASK &
-	    (PM3_READ_REG(PM3ByAperture1Mode));
-	pixsize2 =
-	    PM3ByApertureMode_PIXELSIZE_MASK &
-	    (PM3_READ_REG(PM3ByAperture2Mode));
-
-	DASSERT((pixsize1 == pixsize2),
-		"pixsize the same in both aperture\n");
+	if (var->xres != var->xres_virtual) {
+		DPRINTK("virtual x resolution != physical x resolution not supported\n");
+		return -EINVAL;
+	}
 
-	if (pixsize1 & PM3ByApertureMode_PIXELSIZE_32BIT)
-		curpar->depth = 32;
-	else if (pixsize1 & PM3ByApertureMode_PIXELSIZE_16BIT)
-	{
-		curpar->depth = 16;
+	if (var->yres > var->yres_virtual) {
+		DPRINTK("virtual y resolution < physical y resolution not possible\n");
+		return -EINVAL;
 	}
-	else
-		curpar->depth = 8;
-
-	/* not sure if I need to add one on the next ; it give better result with */
-	curpar->htotal =
-	    pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
-			     1 + PM3_READ_REG(PM3HTotal));
-	curpar->hsend =
-	    pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
-			     PM3_READ_REG(PM3HsEnd));
-	curpar->hsstart =
-	    pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
-			     PM3_READ_REG(PM3HsStart));
-	curpar->hbend =
-	    pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
-			     PM3_READ_REG(PM3HbEnd));
-
-	curpar->stride =
-	    pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
-			     PM3_READ_REG(PM3ScreenStride));
-
-	curpar->vtotal = 1 + PM3_READ_REG(PM3VTotal);
-	curpar->vsend = 1 + PM3_READ_REG(PM3VsEnd);
-	curpar->vsstart = 1 + PM3_READ_REG(PM3VsStart);
-	curpar->vbend = PM3_READ_REG(PM3VbEnd);
-
-	curpar->video = PM3_READ_REG(PM3VideoControl);
-
-	curpar->base = PM3_READ_REG(PM3ScreenBase);
-	curpar->width = curpar->htotal - curpar->hbend; /* make virtual == displayed resolution */
-	curpar->height = curpar->vtotal - curpar->vbend;
-
-	DPRINTK(2, "Found : %d * %d, %d Khz, stride is %08x\n",
-		curpar->width, curpar->height, curpar->pixclock,
-		curpar->stride);
-}
 
-static unsigned long pm3fb_size_memory(struct pm3fb_info *l_fb_info)
-{
-	unsigned long memsize = 0, tempBypass, i, temp1, temp2;
-	u16 subvendor, subdevice;
-	pm3fb_timing_result ptr;
-
-	DTRACE;
-
-	l_fb_info->fb_size = 64 * 1024 * 1024;	/* pm3 aperture always 64 MB */
-	pm3fb_mapIO(l_fb_info);	/* temporary map IO */
-
-	DASSERT((l_fb_info->vIOBase != NULL),
-		"IO successfully mapped before mem detect\n");
-	DASSERT((l_fb_info->v_fb != NULL),
-		"FB successfully mapped before mem detect\n");
-
-	/* card-specific stuff, *before* accessing *any* FB memory */
-	if ((!pci_read_config_word
-	     (l_fb_info->dev, PCI_SUBSYSTEM_VENDOR_ID, &subvendor))
-	    &&
-	    (!pci_read_config_word
-	     (l_fb_info->dev, PCI_SUBSYSTEM_ID, &subdevice))) {
-		i = 0; l_fb_info->board_type = 0;
-		while ((cardbase[i].cardname[0]) && !(l_fb_info->board_type)) {
-			if ((cardbase[i].subvendor == subvendor) &&
-			    (cardbase[i].subdevice == subdevice) &&
-			    (cardbase[i].func == PCI_FUNC(l_fb_info->dev->devfn))) {
-				DPRINTK(2, "Card #%ld is an %s\n",
-					l_fb_info->board_num,
-					cardbase[i].cardname);
-				if (cardbase[i].specific_setup)
-					cardbase[i].specific_setup(l_fb_info);
-				l_fb_info->board_type = i;
-			}
-			i++;
-		}
-		if (!l_fb_info->board_type) {
-			DPRINTK(1, "Card #%ld is an unknown 0x%04x / 0x%04x\n",
-				l_fb_info->board_num, subvendor, subdevice);
-		}
-	} else {
-		printk(KERN_ERR "pm3fb: Error: pci_read_config_word failed, board #%ld\n",
-		       l_fb_info->board_num);
+	if (var->xoffset) {
+		DPRINTK("xoffset not supported\n");
+		return -EINVAL;
 	}
 
-	if (printtimings)
-		pm3fb_show_cur_timing(l_fb_info);
-	
-	/* card-specific setup is done, we preserve the final
-           memory timing for future reference */
-	if ((ptr = pm3fb_preserve_memory_timings(l_fb_info)) == pm3fb_timing_problem) { /* memory timings were wrong ! oops.... */
-		return(0);
+	if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+		DPRINTK("interlace not supported\n");
+		return -EINVAL;
 	}
-	
-	tempBypass = PM3_READ_REG(PM3MemBypassWriteMask);
 
-	DPRINTK(2, "PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
+	var->xres = (var->xres + 31) & ~31; /* could sometimes be 8 */
+	lpitch = var->xres * ((var->bits_per_pixel + 7)>>3);
 
-	PM3_SLOW_WRITE_REG(PM3MemBypassWriteMask, 0xFFFFFFFF);
+	if (var->xres < 200 || var->xres > 2048) {
+		DPRINTK("width not supported: %u\n", var->xres);
+		return -EINVAL;
+	}
 
-	/* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
-	for (i = 0; i < 32; i++) {
-		fb_writel(i * 0x00345678,
-			  (l_fb_info->v_fb + (i * 1048576)));
-		mb();
-		temp1 = fb_readl((l_fb_info->v_fb + (i * 1048576)));
+	if (var->yres < 200 || var->yres > 4095) {
+		DPRINTK("height not supported: %u\n", var->yres);
+		return -EINVAL;
+	}
 
-		/* Let's check for wrapover, write will fail at 16MB boundary */
-		if (temp1 == (i * 0x00345678))
-			memsize = i;
-		else
-			break;
+	if (lpitch * var->yres_virtual > info->fix.smem_len) {
+		DPRINTK("no memory for screen (%ux%ux%u)\n",
+			var->xres, var->yres_virtual, var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (PICOS2KHZ(var->pixclock) > PM3_MAX_PIXCLOCK) {
+		DPRINTK("pixclock too high (%ldKHz)\n", PICOS2KHZ(var->pixclock));
+		return -EINVAL;
 	}
 
-	DPRINTK(2, "First detect pass already got %ld MB\n", memsize + 1);
+	var->accel_flags = 0;	/* Can't mmap if this is on */
 
-	if (memsize == i) {
-		for (i = 0; i < 32; i++) {
-			/* Clear first 32MB ; 0 is 0, no need to byteswap */
-			writel(0x0000000,
-			       (l_fb_info->v_fb + (i * 1048576)));
-			mb();
-		}
+	DPRINTK("Checking graphics mode at %dx%d depth %d\n",
+		var->xres, var->yres, var->bits_per_pixel);
+	return 0;
+}
 
-		for (i = 32; i < 64; i++) {
-			fb_writel(i * 0x00345678,
-				  (l_fb_info->v_fb + (i * 1048576)));
-			mb();
-			temp1 =
-			    fb_readl((l_fb_info->v_fb + (i * 1048576)));
-			temp2 =
-			    fb_readl((l_fb_info->v_fb +
-				      ((i - 32) * 1048576)));
-			if ((temp1 == (i * 0x00345678)) && (temp2 == 0))	/* different value, different RAM... */
-				memsize = i;
-			else
-				break;
-		}
-	}
+static int pm3fb_set_par(struct fb_info *info)
+{
+	struct pm3_par *par = info->par;
+	const u32 xres = (info->var.xres + 31) & ~31;
+	const int depth = (info->var.bits_per_pixel + 7) & ~7;
 
-	DPRINTK(2, "Second detect pass got %ld MB\n", memsize + 1);
+	par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
+					(info->var.yoffset * xres)
+					+ info->var.xoffset);
+	par->video = 0;
 
-	PM3_SLOW_WRITE_REG(PM3MemBypassWriteMask, tempBypass);
+	if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		par->video |= PM3VideoControl_HSYNC_ACTIVE_HIGH;
+	else
+		par->video |= PM3VideoControl_HSYNC_ACTIVE_LOW;
 
-	pm3fb_unmapIO(l_fb_info);
-	memsize = 1048576 * (memsize + 1);
+	if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		par->video |= PM3VideoControl_VSYNC_ACTIVE_HIGH;
+	else
+		par->video |= PM3VideoControl_VSYNC_ACTIVE_LOW;
 
-	DPRINTK(2, "Returning 0x%08lx bytes\n", memsize);
+	if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
+		par->video |= PM3VideoControl_LINE_DOUBLE_ON;
+	else
+		par->video |= PM3VideoControl_LINE_DOUBLE_OFF;
 
-	if (forcesize[l_fb_info->board_num] && ((forcesize[l_fb_info->board_num] * 1048576) != memsize))
-	{
-		printk(KERN_WARNING "pm3fb: mismatch between probed (%ld MB) and specified (%hd MB) memory size, using SPECIFIED !\n", memsize, forcesize[l_fb_info->board_num]);
-		memsize = 1048576 * forcesize[l_fb_info->board_num];
+	if (info->var.activate == FB_ACTIVATE_NOW)
+		par->video |= PM3VideoControl_ENABLE;
+	else {
+		par->video |= PM3VideoControl_DISABLE;
+		DPRINTK("PM3Video disabled\n");
 	}
-	
-	l_fb_info->fb_size = memsize;
-	
-	if (ptr == pm3fb_timing_retry)
-	{
-		printk(KERN_WARNING "pm3fb: retrying memory timings check");
-		if (pm3fb_try_memory_timings(l_fb_info) == pm3fb_timing_problem)
-			return(0);
+	switch (depth) {
+	case 8:
+		par->video |= PM3VideoControl_PIXELSIZE_8BIT;
+		break;
+	case 12:
+	case 15:
+	case 16:
+		par->video |= PM3VideoControl_PIXELSIZE_16BIT;
+		break;
+	case 32:
+		par->video |= PM3VideoControl_PIXELSIZE_32BIT;
+		break;
+	default:
+		DPRINTK("Unsupported depth\n");
+		break;
 	}
-	
-	return (memsize);
-}
-
-static void pm3fb_clear_memory(struct pm3fb_info *l_fb_info, u32 cc)
-{
-	int i;
 
-	DTRACE;
+	info->fix.visual =
+		(depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = ((info->var.xres_virtual + 7)  & ~7)
+					* depth / 8;
 
-	for (i = 0; i < (l_fb_info->fb_size / sizeof(u32)) ; i++) /* clear entire FB memory to black */
-	{
-		fb_writel(cc, (l_fb_info->v_fb + (i * sizeof(u32))));
-	}
+/*	pm3fb_clear_memory(info, 0);*/
+	pm3fb_clear_colormap(par, 0, 0, 0);
+	PM3_WRITE_DAC_REG(par, PM3RD_CursorMode,
+			  PM3RD_CursorMode_CURSOR_DISABLE);
+	pm3fb_write_mode(info);
+	return 0;
 }
 
-static void pm3fb_clear_colormap(struct pm3fb_info *l_fb_info, unsigned char r, unsigned char g, unsigned char b)
+static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info)
 {
-	int i;
-
-	DTRACE;
+	struct pm3_par *par = info->par;
+
+	if (regno >= 256)  /* no. of hw registers */
+	   return -EINVAL;
+
+	/* grayscale works only partially under directcolor */
+	if (info->var.grayscale) {
+	   /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+	   red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+	}
+
+	/* Directcolor:
+	 *   var->{color}.offset contains start of bitfield
+	 *   var->{color}.length contains length of bitfield
+	 *   {hardwarespecific} contains width of DAC
+	 *   pseudo_palette[X] is programmed to (X << red.offset) |
+	 *				      (X << green.offset) |
+	 *				      (X << blue.offset)
+	 *   RAMDAC[X] is programmed to (red, green, blue)
+	 *   color depth = SUM(var->{color}.length)
+	 *
+	 * Pseudocolor:
+	 *	var->{color}.offset is 0
+	 *	var->{color}.length contains width of DAC or the number of unique
+	 *			colors available (color depth)
+	 *	pseudo_palette is not used
+	 *	RAMDAC[X] is programmed to (red, green, blue)
+	 *	color depth = var->{color}.length
+	 */
 
-	for (i = 0; i < 256 ; i++) /* fill color map with white */
-		pm3fb_set_color(l_fb_info, i, r, g, b);
+	/*
+	 * This is the point where the color is converted to something that
+	 * is acceptable by the hardware.
+	 */
+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+	red = CNVT_TOHW(red, info->var.red.length);
+	green = CNVT_TOHW(green, info->var.green.length);
+	blue = CNVT_TOHW(blue, info->var.blue.length);
+	transp = CNVT_TOHW(transp, info->var.transp.length);
+#undef CNVT_TOHW
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+	info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
+		u32 v;
+
+		if (regno >= 16)
+			return -EINVAL;
+
+		v = (red << info->var.red.offset) |
+			(green << info->var.green.offset) |
+			(blue << info->var.blue.offset) |
+			(transp << info->var.transp.offset);
+
+		switch (info->var.bits_per_pixel) {
+		case 8:
+			break;
+		case 16:
+		case 24:
+		case 32:
+			((u32*)(info->pseudo_palette))[regno] = v;
+			break;
+		}
+		return 0;
+	}
+	else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+		pm3fb_set_color(par, regno, red, green, blue);
 
+	return 0;
 }
 
-/* common initialisation */
-static void pm3fb_common_init(struct pm3fb_info *l_fb_info)
+static int pm3fb_pan_display(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
 {
-	DTRACE;
+	struct pm3_par *par = info->par;
+	const u32 xres = (var->xres + 31) & ~31;
 
-	DPRINTK(2, "Initializing board #%ld @ %lx\n", l_fb_info->board_num,
-		(unsigned long) l_fb_info);
+	par->base = pm3fb_shift_bpp(var->bits_per_pixel,
+					(var->yoffset * xres)
+					+ var->xoffset);
+	PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+	return 0;
+}
 
-	strcpy(l_fb_info->gen.info.modename, permedia3_name);
-	disp[l_fb_info->board_num].scrollmode = 0;	/* SCROLL_YNOMOVE; *//* 0 means "let fbcon choose" */
-	l_fb_info->gen.parsize = sizeof(struct pm3fb_par);
-	l_fb_info->gen.info.changevar = NULL;
-	l_fb_info->gen.info.fbops = &pm3fb_ops;
-	l_fb_info->gen.info.disp = &(disp[l_fb_info->board_num]);
-	if (fontn[l_fb_info->board_num][0])
-		strcpy(l_fb_info->gen.info.fontname,
-		       fontn[l_fb_info->board_num]);
-	l_fb_info->gen.info.switch_con = &fbgen_switch;
-	l_fb_info->gen.info.updatevar = &fbgen_update_var;	/* */
-	l_fb_info->gen.info.flags = FBINFO_FLAG_DEFAULT;
+static int pm3fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct pm3_par *par = info->par;
+	u32 video = par->video;
 
-	pm3fb_mapIO(l_fb_info);
-
-	pm3fb_clear_memory(l_fb_info, 0);
-	pm3fb_clear_colormap(l_fb_info, 0, 0, 0);
-
-	(void) fbgen_get_var(&(disp[l_fb_info->board_num]).var, -1,
-			     &l_fb_info->gen.info);
-
-	if (depth[l_fb_info->board_num]) /* override mode-defined depth */
-	{
-		pm3fb_encode_depth(&(disp[l_fb_info->board_num]).var, depth[l_fb_info->board_num]);
-		(disp[l_fb_info->board_num]).var.bits_per_pixel = depth2bpp(depth[l_fb_info->board_num]);
-	}
-
-	(void) fbgen_do_set_var(&(disp[l_fb_info->board_num]).var, 1,
-				&l_fb_info->gen);
-
-	fbgen_set_disp(-1, &l_fb_info->gen);
-
-	do_install_cmap(0, &l_fb_info->gen.info);
-
-	if (register_framebuffer(&l_fb_info->gen.info) < 0) {
-		DPRINTK(1, "Couldn't register framebuffer\n");
-		return;
-	}
-
-	PM3_WRITE_DAC_REG(PM3RD_CursorMode,
-			  PM3RD_CursorMode_CURSOR_DISABLE);
-	
-	PM3_SHOW_CUR_MODE;
-	
-	pm3fb_write_mode(l_fb_info);
-	
-	printk("fb%d: %s, using %uK of video memory (%s)\n",
-	       l_fb_info->gen.info.node,
-	       permedia3_name, (u32) (l_fb_info->fb_size >> 10),
-	       cardbase[l_fb_info->board_type].cardname);
-}
-
-/* **************************************************** */
-/* ***** accelerated permedia3-specific functions ***** */
-/* **************************************************** */
-#ifdef PM3FB_USE_ACCEL
-static void pm3fb_wait_pm3(struct pm3fb_info *l_fb_info)
-{
-	DTRACE;
-
-	PM3_SLOW_WRITE_REG(PM3FilterMode, PM3FilterModeSync);
-	PM3_SLOW_WRITE_REG(PM3Sync, 0);
-	mb();
-	do {
-		while ((PM3_READ_REG(PM3OutFIFOWords)) == 0);
-		rmb();
-	} while ((PM3_READ_REG(PM3OutputFifo)) != PM3Sync_Tag);
-}
-
-static void pm3fb_init_engine(struct pm3fb_info *l_fb_info)
-{
-	PM3_SLOW_WRITE_REG(PM3FilterMode, PM3FilterModeSync);
-	PM3_SLOW_WRITE_REG(PM3StatisticMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3DeltaMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3RasterizerMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3ScissorMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3LineStippleMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3AreaStippleMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3GIDMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3DepthMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3StencilMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3StencilData, 0x0);
-	PM3_SLOW_WRITE_REG(PM3ColorDDAMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureCoordMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureIndexMode0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureIndexMode1, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureReadMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3LUTMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureFilterMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureCompositeMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureApplicationMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureCompositeColorMode1, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureCompositeAlphaMode1, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureCompositeColorMode0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3TextureCompositeAlphaMode0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FogMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3ChromaTestMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3AlphaTestMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3AntialiasMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3YUVMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3AlphaBlendColorMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3AlphaBlendAlphaMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3DitherMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3LogicalOpMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3RouterMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3Window, 0x0);
-
-	PM3_SLOW_WRITE_REG(PM3Config2D, 0x0);
-
-	PM3_SLOW_WRITE_REG(PM3SpanColorMask, 0xffffffff);
-
-	PM3_SLOW_WRITE_REG(PM3XBias, 0x0);
-	PM3_SLOW_WRITE_REG(PM3YBias, 0x0);
-	PM3_SLOW_WRITE_REG(PM3DeltaControl, 0x0);
-
-	PM3_SLOW_WRITE_REG(PM3BitMaskPattern, 0xffffffff);
-
-	PM3_SLOW_WRITE_REG(PM3FBDestReadEnables,
-			   PM3FBDestReadEnables_E(0xff) |
-			   PM3FBDestReadEnables_R(0xff) |
-			   PM3FBDestReadEnables_ReferenceAlpha(0xff));
-	PM3_SLOW_WRITE_REG(PM3FBDestReadBufferAddr0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FBDestReadBufferOffset0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FBDestReadBufferWidth0,
-			   PM3FBDestReadBufferWidth_Width(l_fb_info->
-							  current_par->
-							  width));
-
-	PM3_SLOW_WRITE_REG(PM3FBDestReadMode,
-			   PM3FBDestReadMode_ReadEnable |
-			   PM3FBDestReadMode_Enable0);
-	PM3_SLOW_WRITE_REG(PM3FBSourceReadBufferAddr, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FBSourceReadBufferOffset, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FBSourceReadBufferWidth,
-			   PM3FBSourceReadBufferWidth_Width(l_fb_info->
-							    current_par->
-							    width));
-	PM3_SLOW_WRITE_REG(PM3FBSourceReadMode,
-			   PM3FBSourceReadMode_Blocking |
-			   PM3FBSourceReadMode_ReadEnable);
-
-	{
-		unsigned long rm = 1;
-		switch (l_fb_info->current_par->depth) {
-		case 8:
-			PM3_SLOW_WRITE_REG(PM3PixelSize,
-					   PM3PixelSize_GLOBAL_8BIT);
-			break;
-		case 12:
-		case 15:
-		case 16:
-			PM3_SLOW_WRITE_REG(PM3PixelSize,
-					   PM3PixelSize_GLOBAL_16BIT);
-			break;
-		case 32:
-			PM3_SLOW_WRITE_REG(PM3PixelSize,
-					   PM3PixelSize_GLOBAL_32BIT);
-			break;
-		default:
-			DPRINTK(1, "Unsupported depth %d\n",
-				l_fb_info->current_par->depth);
-			break;
-		}
-		PM3_SLOW_WRITE_REG(PM3RasterizerMode, rm);
-	}
-
-	PM3_SLOW_WRITE_REG(PM3FBSoftwareWriteMask, 0xffffffff);
-	PM3_SLOW_WRITE_REG(PM3FBHardwareWriteMask, 0xffffffff);
-	PM3_SLOW_WRITE_REG(PM3FBWriteMode,
-			   PM3FBWriteMode_WriteEnable |
-			   PM3FBWriteMode_OpaqueSpan |
-			   PM3FBWriteMode_Enable0);
-	PM3_SLOW_WRITE_REG(PM3FBWriteBufferAddr0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FBWriteBufferOffset0, 0x0);
-	PM3_SLOW_WRITE_REG(PM3FBWriteBufferWidth0,
-			   PM3FBWriteBufferWidth_Width(l_fb_info->
-						       current_par->
-						       width));
-
-	PM3_SLOW_WRITE_REG(PM3SizeOfFramebuffer, 0x0);
-	{
-		unsigned long sofb = (8UL * l_fb_info->fb_size) /
-			((depth2bpp(l_fb_info->current_par->depth))
-			 * l_fb_info->current_par->width);	/* size in lines of FB */
-		if (sofb > 4095)
-			PM3_SLOW_WRITE_REG(PM3SizeOfFramebuffer, 4095);
-		else
-			PM3_SLOW_WRITE_REG(PM3SizeOfFramebuffer, sofb);
-		
-		switch (l_fb_info->current_par->depth) {
-		case 8:
-			PM3_SLOW_WRITE_REG(PM3DitherMode,
-					   (1 << 10) | (2 << 3));
-			break;
-		case 12:
-		case 15:
-		case 16:
-			PM3_SLOW_WRITE_REG(PM3DitherMode,
-					   (1 << 10) | (1 << 3));
-			break;
-		case 32:
-			PM3_SLOW_WRITE_REG(PM3DitherMode,
-					   (1 << 10) | (0 << 3));
-			break;
-		default:
-			DPRINTK(1, "Unsupported depth %d\n",
-				l_fb_info->current_par->depth);
-			break;
-		}
-	}
-
-	PM3_SLOW_WRITE_REG(PM3dXDom, 0x0);
-	PM3_SLOW_WRITE_REG(PM3dXSub, 0x0);
-	PM3_SLOW_WRITE_REG(PM3dY, (1 << 16));
-	PM3_SLOW_WRITE_REG(PM3StartXDom, 0x0);
-	PM3_SLOW_WRITE_REG(PM3StartXSub, 0x0);
-	PM3_SLOW_WRITE_REG(PM3StartY, 0x0);
-	PM3_SLOW_WRITE_REG(PM3Count, 0x0);
-	
-/* Disable LocalBuffer. better safe than sorry */
-	PM3_SLOW_WRITE_REG(PM3LBDestReadMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3LBDestReadEnables, 0x0);
-	PM3_SLOW_WRITE_REG(PM3LBSourceReadMode, 0x0);
-	PM3_SLOW_WRITE_REG(PM3LBWriteMode, 0x0);
-	
-	pm3fb_wait_pm3(l_fb_info);
-}
-
-#ifdef FBCON_HAS_CFB32
-static void pm3fb_cfb32_clear(struct vc_data *conp,
-			      struct display *p,
-			      int sy, int sx, int height, int width)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	u32 c;
-
-	DTRACE;
-
-	sx = sx * fontwidth(p);
-	width = width * fontwidth(p);
-	sy = sy * fontheight(p);
-	height = height * fontheight(p);
-	c = ((u32 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
-
-	/* block fills in 32bpp are hard, but in low res (width <= 1600 :-)
-	   we can use 16bpp operations, but not if NoWriteMask is on (SDRAM)  */
-	if ((l_fb_info->current_par->width > 1600) ||
-	    (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)) {
-		PM3_WAIT(4);
-
-		PM3_WRITE_REG(PM3Config2D,
-					  PM3Config2D_UseConstantSource |
-					  PM3Config2D_ForegroundROPEnable |
-					  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-					  PM3Config2D_FBWriteEnable);
-
-		PM3_WRITE_REG(PM3ForegroundColor, c);
-
-		PM3_WRITE_REG(PM3RectanglePosition,
-			      (PM3RectanglePosition_XOffset(sx)) |
-			      (PM3RectanglePosition_YOffset(sy)));
-
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      PM3Render2D_SpanOperation |
-			      (PM3Render2D_Width(width)) |
-			      (PM3Render2D_Height(height)));
-	} else {
-		PM3_WAIT(8);
-
-		PM3_WRITE_REG(PM3FBBlockColor, c);
-
-		PM3_WRITE_REG(PM3PixelSize, PM3PixelSize_GLOBAL_16BIT);
-
-		PM3_WRITE_REG(PM3FBWriteBufferWidth0,
-			      PM3FBWriteBufferWidth_Width(l_fb_info->
-							  current_par->
-							  width << 1));
-
-		PM3_WRITE_REG(PM3Config2D,
-					  PM3Config2D_UseConstantSource |
-					  PM3Config2D_ForegroundROPEnable |
-					  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-					  PM3Config2D_FBWriteEnable);
-
-		PM3_WRITE_REG(PM3RectanglePosition,
-			      (PM3RectanglePosition_XOffset(sx << 1)) |
-			      (PM3RectanglePosition_YOffset(sy)));
-
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      (PM3Render2D_Width(width << 1)) |
-			      (PM3Render2D_Height(height)));
-
-		PM3_WRITE_REG(PM3FBWriteBufferWidth0,
-			      PM3FBWriteBufferWidth_Width(l_fb_info->
-							  current_par->
-							  width));
-
-		PM3_WRITE_REG(PM3PixelSize, PM3PixelSize_GLOBAL_32BIT);
-	}
-
-	pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfb32_clear_margins(struct vc_data *conp,
-				      struct display *p, int bottom_only)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	int sx, sy;
-	u32 c;
-
-	DTRACE;
-
-	sx = conp->vc_cols * fontwidth(p);	/* right margin */
-	sy = conp->vc_rows * fontheight(p);	/* bottom margin */
-	c = ((u32 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
-
-	if (!bottom_only) {	/* right margin top->bottom */
-		PM3_WAIT(4);
-
-		PM3_WRITE_REG(PM3Config2D,
-					  PM3Config2D_UseConstantSource |
-					  PM3Config2D_ForegroundROPEnable |
-					  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-					  PM3Config2D_FBWriteEnable);
-
-		PM3_WRITE_REG(PM3ForegroundColor, c);
-
-		PM3_WRITE_REG(PM3RectanglePosition,
-			      (PM3RectanglePosition_XOffset
-			       (p->var.xoffset +
-				sx)) | (PM3RectanglePosition_YOffset(p->
-								     var.
-								     yoffset)));
-
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      PM3Render2D_SpanOperation |
-			      (PM3Render2D_Width(p->var.xres - sx)) |
-			      (PM3Render2D_Height(p->var.yres)));
-	}
-
-	/* bottom margin left -> right */
-	PM3_WAIT(4);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable);
-
-	PM3_WRITE_REG(PM3ForegroundColor, c);
-
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(p->var.xoffset)) |
-		      (PM3RectanglePosition_YOffset(p->var.yoffset + sy)));
-
-	PM3_WRITE_REG(PM3Render2D,
-		      PM3Render2D_XPositive |
-		      PM3Render2D_YPositive |
-		      PM3Render2D_Operation_Normal |
-		      PM3Render2D_SpanOperation |
-		      (PM3Render2D_Width(p->var.xres)) |
-		      (PM3Render2D_Height(p->var.yres - sy)));
-
-	pm3fb_wait_pm3(l_fb_info);
-}
-#endif /* FBCON_HAS_CFB32 */
-#ifdef FBCON_HAS_CFB16
-static void pm3fb_cfb16_clear(struct vc_data *conp,
-			      struct display *p,
-			      int sy, int sx, int height, int width)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	u32 c;
-
-	DTRACE;
-
-	sx = sx * fontwidth(p);
-	width = width * fontwidth(p);
-	sy = sy * fontheight(p);
-	height = height * fontheight(p);
-	c = ((u16 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
-	c = c | (c << 16);
-
-	PM3_WAIT(4);
-
-	if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-		PM3_WRITE_REG(PM3ForegroundColor, c);
-	else
-		PM3_WRITE_REG(PM3FBBlockColor, c);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable);
-
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(sx)) |
-		      (PM3RectanglePosition_YOffset(sy)));
-	
-	if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      PM3Render2D_SpanOperation |
-			      (PM3Render2D_Width(width)) |
-			      (PM3Render2D_Height(height)));
-	else
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      (PM3Render2D_Width(width)) |
-			      (PM3Render2D_Height(height)));
-	
-	pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfb16_clear_margins(struct vc_data *conp,
-				      struct display *p, int bottom_only)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	int sx, sy;
-	u32 c;
-
-	DTRACE;
-
-	sx = conp->vc_cols * fontwidth(p);	/* right margin */
-	sy = conp->vc_rows * fontheight(p);	/* bottom margin */
-	c = ((u16 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
-	c = c | (c << 16);
-
-	if (!bottom_only) {	/* right margin top->bottom */
-		PM3_WAIT(4);
-
-		PM3_WRITE_REG(PM3Config2D,
-					  PM3Config2D_UseConstantSource |
-					  PM3Config2D_ForegroundROPEnable |
-					  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-					  PM3Config2D_FBWriteEnable);
-		
-		if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-			PM3_WRITE_REG(PM3ForegroundColor, c);
-		else
-			PM3_WRITE_REG(PM3FBBlockColor, c);
-		
-		PM3_WRITE_REG(PM3RectanglePosition,
-			      (PM3RectanglePosition_XOffset
-			       (p->var.xoffset +
-				sx)) | (PM3RectanglePosition_YOffset(p->
-								     var.
-								     yoffset)));
-		if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-			PM3_WRITE_REG(PM3Render2D,
-				      PM3Render2D_XPositive |
-				      PM3Render2D_YPositive |
-				      PM3Render2D_Operation_Normal |
-				      PM3Render2D_SpanOperation |
-				      (PM3Render2D_Width(p->var.xres - sx)) |
-				      (PM3Render2D_Height(p->var.yres)));
-		else
-			PM3_WRITE_REG(PM3Render2D,
-				      PM3Render2D_XPositive |
-				      PM3Render2D_YPositive |
-				      PM3Render2D_Operation_Normal |
-				      (PM3Render2D_Width(p->var.xres - sx)) |
-				      (PM3Render2D_Height(p->var.yres)));
-	}
-	
-	/* bottom margin left -> right */
-	PM3_WAIT(4);
-	
-	PM3_WRITE_REG(PM3Config2D,
-		      PM3Config2D_UseConstantSource |
-		      PM3Config2D_ForegroundROPEnable |
-		      (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-		      PM3Config2D_FBWriteEnable);
-	
-	if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-		PM3_WRITE_REG(PM3ForegroundColor, c);
-	else
-		PM3_WRITE_REG(PM3FBBlockColor, c);
-	
-	
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(p->var.xoffset)) |
-		      (PM3RectanglePosition_YOffset(p->var.yoffset + sy)));
-	
-	if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      PM3Render2D_SpanOperation |
-			      (PM3Render2D_Width(p->var.xres)) |
-			      (PM3Render2D_Height(p->var.yres - sy)));
-	else
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      (PM3Render2D_Width(p->var.xres)) |
-			      (PM3Render2D_Height(p->var.yres - sy)));
-
-	pm3fb_wait_pm3(l_fb_info);
-}
-#endif /* FBCON_HAS_CFB16 */
-#ifdef FBCON_HAS_CFB8
-static void pm3fb_cfb8_clear(struct vc_data *conp,
-			     struct display *p,
-			     int sy, int sx, int height, int width)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	u32 c;
-
-	DTRACE;
-
-	sx = sx * fontwidth(p);
-	width = width * fontwidth(p);
-	sy = sy * fontheight(p);
-	height = height * fontheight(p);
-
-	c = attr_bgcol_ec(p, conp);
-	c |= c << 8;
-	c |= c << 16;
-
-	PM3_WAIT(4);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable);
-
-	PM3_WRITE_REG(PM3ForegroundColor, c);
-
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(sx)) |
-		      (PM3RectanglePosition_YOffset(sy)));
-
-	PM3_WRITE_REG(PM3Render2D,
-		      PM3Render2D_XPositive |
-		      PM3Render2D_YPositive |
-		      PM3Render2D_Operation_Normal |
-		      PM3Render2D_SpanOperation |
-		      (PM3Render2D_Width(width)) |
-		      (PM3Render2D_Height(height)));
-
-	pm3fb_wait_pm3(l_fb_info);
-}
+	/*
+	 * Oxygen VX1 - it appears that setting PM3VideoControl and
+	 * then PM3RD_SyncControl to the same SYNC settings undoes
+	 * any net change - they seem to xor together.  Only set the
+	 * sync options in PM3RD_SyncControl.  --rmk
+	 */
+	video &= ~(PM3VideoControl_HSYNC_MASK |
+		   PM3VideoControl_VSYNC_MASK);
+	video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
+		 PM3VideoControl_VSYNC_ACTIVE_HIGH;
 
-static void pm3fb_cfb8_clear_margins(struct vc_data *conp,
-				     struct display *p, int bottom_only)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	int sx, sy;
-	u32 c;
-
-	DTRACE;
-
-	sx = conp->vc_cols * fontwidth(p);	/* right margin */
-	sy = conp->vc_rows * fontheight(p);	/* bottom margin */
-	c = attr_bgcol_ec(p, conp);
-	c |= c << 8;
-	c |= c << 16;
-
-	if (!bottom_only) {	/* right margin top->bottom */
-		PM3_WAIT(4);
-
-		PM3_WRITE_REG(PM3Config2D,
-					  PM3Config2D_UseConstantSource |
-					  PM3Config2D_ForegroundROPEnable |
-					  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-					  PM3Config2D_FBWriteEnable);
-
-		PM3_WRITE_REG(PM3ForegroundColor, c);
-
-		PM3_WRITE_REG(PM3RectanglePosition,
-			      (PM3RectanglePosition_XOffset
-			       (p->var.xoffset +
-				sx)) | (PM3RectanglePosition_YOffset(p->
-								     var.
-								     yoffset)));
-
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      PM3Render2D_SpanOperation |
-			      (PM3Render2D_Width(p->var.xres - sx)) |
-			      (PM3Render2D_Height(p->var.yres)));
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		video = video | PM3VideoControl_ENABLE;
+		break;
+	case FB_BLANK_NORMAL:	/* FIXME */
+		video = video & ~(PM3VideoControl_ENABLE);
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		video = video & ~(PM3VideoControl_HSYNC_MASK |
+				  PM3VideoControl_BLANK_ACTIVE_LOW);
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		video = video & ~(PM3VideoControl_VSYNC_MASK |
+				  PM3VideoControl_BLANK_ACTIVE_LOW);
+		break;
+	case FB_BLANK_POWERDOWN:
+		video = video & ~(PM3VideoControl_HSYNC_MASK |
+				  PM3VideoControl_VSYNC_MASK |
+				  PM3VideoControl_BLANK_ACTIVE_LOW);
+		break;
+	default:
+		DPRINTK("Unsupported blanking %d\n", blank_mode);
+		return 1;
 	}
 
-	/* bottom margin left -> right */
-	PM3_WAIT(4);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable);
-
-	PM3_WRITE_REG(PM3ForegroundColor, c);
-
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(p->var.xoffset)) |
-		      (PM3RectanglePosition_YOffset(p->var.yoffset + sy)));
+	PM3_SLOW_WRITE_REG(par,PM3VideoControl, video);
 
-	PM3_WRITE_REG(PM3Render2D,
-		      PM3Render2D_XPositive |
-		      PM3Render2D_YPositive |
-		      PM3Render2D_Operation_Normal |
-		      PM3Render2D_SpanOperation |
-		      (PM3Render2D_Width(p->var.xres)) |
-		      (PM3Render2D_Height(p->var.yres - sy)));
-
-	pm3fb_wait_pm3(l_fb_info);
-}
-#endif /* FBCON_HAS_CFB8 */
-#if defined(FBCON_HAS_CFB8) || defined(FBCON_HAS_CFB16) || defined(FBCON_HAS_CFB32)
-static void pm3fb_cfbX_bmove(struct display *p,
-			     int sy, int sx,
-			     int dy, int dx, int height, int width)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	int x_align, o_x, o_y;
-
-	DTRACE;
-
-	sx = sx * fontwidth(p);
-	dx = dx * fontwidth(p);
-	width = width * fontwidth(p);
-	sy = sy * fontheight(p);
-	dy = dy * fontheight(p);
-	height = height * fontheight(p);
-
-	o_x = sx - dx;		/*(sx > dx ) ? (sx - dx) : (dx - sx); */
-	o_y = sy - dy;		/*(sy > dy ) ? (sy - dy) : (dy - sy); */
-
-	x_align = (sx & 0x1f);
-
-	PM3_WAIT(6);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UserScissorEnable |
-				  PM3Config2D_ForegroundROPEnable |
-				  PM3Config2D_Blocking |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable);
-
-	PM3_WRITE_REG(PM3ScissorMinXY,
-		      ((dy & 0x0fff) << 16) | (dx & 0x0fff));
-	PM3_WRITE_REG(PM3ScissorMaxXY,
-				  (((dy + height) & 0x0fff) << 16) |
-				  ((dx + width) & 0x0fff));
-
-	PM3_WRITE_REG(PM3FBSourceReadBufferOffset,
-		      PM3FBSourceReadBufferOffset_XOffset(o_x) |
-		      PM3FBSourceReadBufferOffset_YOffset(o_y));
-
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(dx - x_align)) |
-		      (PM3RectanglePosition_YOffset(dy)));
-
-	PM3_WRITE_REG(PM3Render2D,
-		      ((sx > dx) ? PM3Render2D_XPositive : 0) |
-		      ((sy > dy) ? PM3Render2D_YPositive : 0) |
-		      PM3Render2D_Operation_Normal |
-		      PM3Render2D_SpanOperation |
-		      PM3Render2D_FBSourceReadEnable |
-		      (PM3Render2D_Width(width + x_align)) |
-		      (PM3Render2D_Height(height)));
-
-	pm3fb_wait_pm3(l_fb_info);
+	return 0;
 }
 
-static void pm3fb_cfbX_putc(struct vc_data *conp, struct display *p,
-			    int c, int yy, int xx)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	u8 *cdat, asx = 0, asy = 0, o_x = 0, o_y = 0;
-	u32 fgx, bgx, ldat;
-	int sx, sy, i;
-
-	DTRACE;
-
-	if (l_fb_info->current_par->depth == 8)
-		fgx = attr_fgcol(p, c);
-	else if (depth2bpp(l_fb_info->current_par->depth) == 16)
-		fgx = ((u16 *) p->dispsw_data)[attr_fgcol(p, c)];
-	else
-		fgx = ((u32 *) p->dispsw_data)[attr_fgcol(p, c)];
-
-	PM3_COLOR(fgx);
-
-	if (l_fb_info->current_par->depth == 8)
-		bgx = attr_bgcol(p, c);
-	else if (depth2bpp(l_fb_info->current_par->depth) == 16)
-		bgx = ((u16 *) p->dispsw_data)[attr_bgcol(p, c)];
-	else
-		bgx = ((u32 *) p->dispsw_data)[attr_bgcol(p, c)];
-
-	PM3_COLOR(bgx);
-
-	PM3_WAIT(4);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable | PM3Config2D_OpaqueSpan);
-
-	PM3_WRITE_REG(PM3ForegroundColor, fgx);
-	PM3_WRITE_REG(PM3FillBackgroundColor, bgx);
-
-	/* WARNING : address select X need to specify 8 bits for fontwidth <= 8 */
-	/* and 16 bits for fontwidth <= 16 */
-	/* same in _putcs, same for Y and fontheight */
-	if (fontwidth(p) <= 8)
-		asx = 2;
-	else if (fontwidth(p) <= 16)
-		asx = 3;	/* look OK */
-	if (fontheight(p) <= 8)
-		asy = 2;
-	else if (fontheight(p) <= 16)
-		asy = 3;	/* look OK */
-	else if (fontheight(p) <= 32)
-		asy = 4;	/* look OK */
-
-	sx = xx * fontwidth(p);
-	sy = yy * fontheight(p);
-
-	if (fontwidth(p) <= 8)
-		o_x = (8 - (sx & 0x7)) & 0x7;
-	else if (fontwidth(p) <= 16)
-		o_x = (16 - (sx & 0xF)) & 0xF;
-	if (fontheight(p) <= 8)
-		o_y = (8 - (sy & 0x7)) & 0x7;
-	else if (fontheight(p) <= 16)
-		o_y = (16 - (sy & 0xF)) & 0xF;
-	else if (fontheight(p) <= 32)
-		o_y = (32 - (sy & 0x1F)) & 0x1F;
-
-	PM3_WRITE_REG(PM3AreaStippleMode, (o_x << 7) | (o_y << 12) |	/* x_offset, y_offset in pattern */
-		      (1 << 18) |	/* BE */
-		      1 | (asx << 1) | (asy << 4) |	/* address select x/y */
-		      (1 << 20));	/* OpaqueSpan */
-
-	if (fontwidth(p) <= 8) {
-		cdat = p->fontdata + (c & p->charmask) * fontheight(p);
-	} else {
-		cdat =
-		    p->fontdata +
-		    ((c & p->charmask) * (fontheight(p) << 1));
-	}
-
-	PM3_WAIT(2 + fontheight(p));
-
-	for (i = 0; i < fontheight(p); i++) {	/* assume fontheight <= 32 */
-		if (fontwidth(p) <= 8) {
-			ldat = *cdat++;
-		} else {	/* assume fontwidth <= 16 ATM */
-
-			ldat = ((*cdat++) << 8);
-			ldat |= *cdat++;
-		}
-		PM3_WRITE_REG(AreaStipplePattern_indexed(i), ldat);
-	}
+	/*
+	 *  Frame buffer operations
+	 */
 
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(sx)) |
-		      (PM3RectanglePosition_YOffset(sy)));
+static struct fb_ops pm3fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= pm3fb_check_var,
+	.fb_set_par	= pm3fb_set_par,
+	.fb_setcolreg	= pm3fb_setcolreg,
+	.fb_pan_display	= pm3fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,		/* Needed !!! */
+	.fb_copyarea	= cfb_copyarea,		/* Needed !!! */
+	.fb_imageblit	= cfb_imageblit,	/* Needed !!! */
+	.fb_blank	= pm3fb_blank,
+};
 
-	PM3_WRITE_REG(PM3Render2D,
-		      PM3Render2D_AreaStippleEnable |
-		      PM3Render2D_XPositive |
-		      PM3Render2D_YPositive |
-		      PM3Render2D_Operation_Normal |
-		      PM3Render2D_SpanOperation |
-		      (PM3Render2D_Width(fontwidth(p))) |
-		      (PM3Render2D_Height(fontheight(p))));
+/* ------------------------------------------------------------------------- */
 
-	pm3fb_wait_pm3(l_fb_info);
-}
+	/*
+	 *  Initialization
+	 */
 
-static void pm3fb_cfbX_putcs(struct vc_data *conp, struct display *p,
-			     const unsigned short *s, int count, int yy,
-			     int xx)
+/* mmio register are already mapped when this function is called */
+/* the pm3fb_fix.smem_start is also set */
+static unsigned long pm3fb_size_memory(struct pm3_par *par)
 {
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-	u8 *cdat, asx = 0, asy = 0, o_x = 0, o_y = 0;
-	u32 fgx, bgx, ldat;
-	int sx, sy, i, j;
-	u16 sc;
-
-	DTRACE;
-
-	sc = scr_readw(s);
-	if (l_fb_info->current_par->depth == 8)
-		fgx = attr_fgcol(p, sc);
-	else if (depth2bpp(l_fb_info->current_par->depth) == 16)
-		fgx = ((u16 *) p->dispsw_data)[attr_fgcol(p, sc)];
-	else
-		fgx = ((u32 *) p->dispsw_data)[attr_fgcol(p, sc)];
-	
-	PM3_COLOR(fgx);
-	
-	if (l_fb_info->current_par->depth == 8)
-		bgx = attr_bgcol(p, sc);
-	else if (depth2bpp(l_fb_info->current_par->depth) == 16)
-		bgx = ((u16 *) p->dispsw_data)[attr_bgcol(p, sc)];
-	else
-		bgx = ((u32 *) p->dispsw_data)[attr_bgcol(p, sc)];
-	
-	PM3_COLOR(bgx);
-
-	PM3_WAIT(4);
-
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable |
-				  PM3Config2D_OpaqueSpan);
-
-	PM3_WRITE_REG(PM3ForegroundColor, fgx);
-	PM3_WRITE_REG(PM3FillBackgroundColor, bgx);
-
-	/* WARNING : address select X need to specify 8 bits for fontwidth <= 8 */
-	/* and 16 bits for fontwidth <= 16 */
-	/* same in _putc, same for Y and fontheight */
-	if (fontwidth(p) <= 8)
-		asx = 2;
-	else if (fontwidth(p) <= 16)
-		asx = 3;	/* look OK */
-	if (fontheight(p) <= 8)
-		asy = 2;
-	else if (fontheight(p) <= 16)
-		asy = 3;	/* look OK */
-	else if (fontheight(p) <= 32)
-		asy = 4;	/* look OK */
-
-	sy = yy * fontheight(p);
-
-	if (fontheight(p) <= 8)
-		o_y = (8 - (sy & 0x7)) & 0x7;
-	else if (fontheight(p) <= 16)
-		o_y = (16 - (sy & 0xF)) & 0xF;
-	else if (fontheight(p) <= 32)
-		o_y = (32 - (sy & 0x1F)) & 0x1F;
-
-	for (j = 0; j < count; j++) {
-		sc = scr_readw(s + j);
-		if (fontwidth(p) <= 8)
-			cdat = p->fontdata +
-				(sc & p->charmask) * fontheight(p);
-		else
-			cdat = p->fontdata +
-				((sc & p->charmask) * fontheight(p) << 1);
-		
-		sx = (xx + j) * fontwidth(p);
-
-		if (fontwidth(p) <= 8)
-			o_x = (8 - (sx & 0x7)) & 0x7;
-		else if (fontwidth(p) <= 16)
-			o_x = (16 - (sx & 0xF)) & 0xF;
-
-		PM3_WAIT(3 + fontheight(p));
-
-		PM3_WRITE_REG(PM3AreaStippleMode, (o_x << 7) | (o_y << 12) | /* x_offset, y_offset in pattern */
-			      (1 << 18) | /* BE */
-			      1 | (asx << 1) | (asy << 4) | /* address select x/y */
-			      (1 << 20)); /* OpaqueSpan */
-
-		for (i = 0; i < fontheight(p); i++) { /* assume fontheight <= 32 */
-			if (fontwidth(p) <= 8) {
-				ldat = *cdat++;
-			} else { /* assume fontwidth <= 16 ATM */
-				ldat = ((*cdat++) << 8);
-				ldat |= *cdat++;
-			}
-			PM3_WRITE_REG(AreaStipplePattern_indexed(i), ldat);
-		}
+	unsigned long	memsize = 0, tempBypass, i, temp1, temp2;
+	unsigned char	__iomem *screen_mem;
 
-		PM3_WRITE_REG(PM3RectanglePosition,
-			      (PM3RectanglePosition_XOffset(sx)) |
-			      (PM3RectanglePosition_YOffset(sy)));
-
-		PM3_WRITE_REG(PM3Render2D,
-			      PM3Render2D_AreaStippleEnable |
-			      PM3Render2D_XPositive |
-			      PM3Render2D_YPositive |
-			      PM3Render2D_Operation_Normal |
-			      PM3Render2D_SpanOperation |
-			      (PM3Render2D_Width(fontwidth(p))) |
-			      (PM3Render2D_Height(fontheight(p))));
+	pm3fb_fix.smem_len = 64 * 1024 * 1024; /* request full aperture size */
+	/* Linear frame buffer - request region and map it. */
+	if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
+				 "pm3fb smem")) {
+		printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
+		return 0;
 	}
-	pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfbX_revc(struct display *p, int xx, int yy)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-
-	xx = xx * fontwidth(p);
-	yy = yy * fontheight(p);
-
-	if (l_fb_info->current_par->depth == 8)
-	{
-		if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-			PM3_SLOW_WRITE_REG(PM3FBSoftwareWriteMask, 0x0F0F0F0F);
-		else
-			PM3_SLOW_WRITE_REG(PM3FBHardwareWriteMask, 0x0F0F0F0F);
+	screen_mem =
+		ioremap_nocache(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+	if (!screen_mem) {
+		printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
+		release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+		return 0;
 	}
 
-	PM3_WAIT(3);
+	/* TODO: card-specific stuff, *before* accessing *any* FB memory */
+	/* For Appian Jeronimo 2000 board second head */
 
-	PM3_WRITE_REG(PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0xa)) |	/* Oxa is GXinvert */
-				  PM3Config2D_FBDestReadEnable |
-				  PM3Config2D_FBWriteEnable);
+	tempBypass = PM3_READ_REG(par, PM3MemBypassWriteMask);
 
-	PM3_WRITE_REG(PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(xx)) |
-		      (PM3RectanglePosition_YOffset(yy)));
+	DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
 
-	PM3_WRITE_REG(PM3Render2D,
-		      PM3Render2D_XPositive |
-		      PM3Render2D_YPositive |
-		      PM3Render2D_Operation_Normal |
-		      PM3Render2D_SpanOperation |
-		      (PM3Render2D_Width(fontwidth(p))) |
-		      (PM3Render2D_Height(fontheight(p))));
+	PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
 
-	pm3fb_wait_pm3(l_fb_info);
+	/* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
+	for (i = 0; i < 32; i++) {
+		fb_writel(i * 0x00345678,
+			  (screen_mem + (i * 1048576)));
+		mb();
+		temp1 = fb_readl((screen_mem + (i * 1048576)));
 
-	if (l_fb_info->current_par->depth == 8)
-	{
-		if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
-			PM3_SLOW_WRITE_REG(PM3FBSoftwareWriteMask, 0xFFFFFFFF);
+		/* Let's check for wrapover, write will fail at 16MB boundary */
+		if (temp1 == (i * 0x00345678))
+			memsize = i;
 		else
-			PM3_SLOW_WRITE_REG(PM3FBHardwareWriteMask, 0xFFFFFFFF);
+			break;
 	}
-}
 
-#endif /* FBCON_HAS_CFB8 || FBCON_HAS_CFB16 || FBCON_HAS_CFB32 */
-#endif /* PM3FB_USE_ACCEL */
-/* *********************************** */
-/* ***** pre-init board(s) setup ***** */
-/* *********************************** */
+	DPRINTK("First detect pass already got %ld MB\n", memsize + 1);
 
-static void pm3fb_mode_setup(char *mode, unsigned long board_num)
-{
-	struct pm3fb_info *l_fb_info = &(fb_info[board_num]);
-	struct pm3fb_par *l_fb_par = &(current_par[board_num]);
-	unsigned long i = 0;
-
-	current_par_valid[board_num] = 0;
-
-	if (!strncmp(mode, "current", 7)) {
-		l_fb_info->use_current = 1;	/* default w/ OpenFirmware */
-	} else {
-		while ((mode_base[i].name[0])
-		       && (!current_par_valid[board_num])) {
-			if (!
-			    (strncmp
-			     (mode, mode_base[i].name,
-			      strlen(mode_base[i].name)))) {
-				memcpy(l_fb_par, &(mode_base[i].user_mode),
-				       sizeof(struct pm3fb_par));
-				current_par_valid[board_num] = 1;
-				DPRINTK(2, "Mode set to %s\n",
-					mode_base[i].name);
-			}
-			i++;
+	if (memsize + 1 == i) {
+		for (i = 0; i < 32; i++) {
+			/* Clear first 32MB ; 0 is 0, no need to byteswap */
+			writel(0x0000000,
+			       (screen_mem + (i * 1048576)));
+			mb();
 		}
-		DASSERT(current_par_valid[board_num],
-			"Valid mode on command line\n");
-	}
-}
 
-static void pm3fb_pciid_setup(char *pciid, unsigned long board_num)
-{
-	short l_bus = -1, l_slot = -1, l_func = -1;
-	char *next;
-
-	if (pciid) {
-		l_bus = simple_strtoul(pciid, &next, 10);
-		if (next && (next[0] == ':')) {
-			pciid = next + 1;
-			l_slot = simple_strtoul(pciid, &next, 10);
-			if (next && (next[0] == ':')) {
-				pciid = next + 1;
-				l_func =
-				    simple_strtoul(pciid, (char **) NULL,
-						   10);
-			}
+		for (i = 32; i < 64; i++) {
+			fb_writel(i * 0x00345678,
+				  (screen_mem + (i * 1048576)));
+			mb();
+			temp1 =
+			    fb_readl((screen_mem + (i * 1048576)));
+			temp2 =
+			    fb_readl((screen_mem + ((i - 32) * 1048576)));
+			/* different value, different RAM... */
+			if ((temp1 == (i * 0x00345678)) && (temp2 == 0))
+				memsize = i;
+			else
+				break;
 		}
-	} else
-		return;
-
-	if ((l_bus >= 0) && (l_slot >= 0) && (l_func >= 0)) {
-		bus[board_num] = l_bus;
-		slot[board_num] = l_slot;
-		func[board_num] = l_func;
-		DPRINTK(2, "Board #%ld will be PciId: %hd:%hd:%hd\n",
-			board_num, l_bus, l_slot, l_func);
-	} else {
-		DPRINTK(1, "Invalid PciId: %hd:%hd:%hd for board #%ld\n",
-			l_bus, l_slot, l_func, board_num);
 	}
-}
-
-static void pm3fb_font_setup(char *lf, unsigned long board_num)
-{
-	unsigned long lfs = strlen(lf);
-
-	if (lfs > (PM3_FONTNAME_SIZE - 1)) {
-		DPRINTK(1, "Fontname %s too long\n", lf);
-		return;
-	}
-	strlcpy(fontn[board_num], lf, lfs + 1);
-}
+	DPRINTK("Second detect pass got %ld MB\n", memsize + 1);
 
-static void pm3fb_bootdepth_setup(char *bds, unsigned long board_num)
-{
-	unsigned long bd = simple_strtoul(bds, (char **) NULL, 10);
+	PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
 
-	if (!(depth_supported(bd))) {
-		printk(KERN_WARNING "pm3fb: ignoring invalid depth %s for board #%ld\n",
-		       bds, board_num);
-		return;
-	}
-	depth[board_num] = bd;
-}
+	iounmap(screen_mem);
+	release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+	memsize = 1048576 * (memsize + 1);
 
-static void pm3fb_forcesize_setup(char *bds, unsigned long board_num)
-{
-	unsigned long bd = simple_strtoul(bds, (char **) NULL, 10);
+	DPRINTK("Returning 0x%08lx bytes\n", memsize);
 
-	if (bd > 64) {
-		printk(KERN_WARNING "pm3fb: ignoring invalid memory size %s for board #%ld\n",
-		       bds, board_num);
-		return;
-	}
-	forcesize[board_num] = bd;
+	return memsize;
 }
 
-static char *pm3fb_boardnum_setup(char *options, unsigned long *bn)
+static int __devinit pm3fb_probe(struct pci_dev *dev,
+				  const struct pci_device_id *ent)
 {
-	char *next;
+	struct fb_info *info;
+	struct pm3_par *par;
+	struct device* device = &dev->dev; /* for pci drivers */
+	int err, retval = -ENXIO;
 
-	if (!(isdigit(options[0]))) {
-		(*bn) = 0;
-		return (options);
+	err = pci_enable_device(dev);
+	if (err) {
+		printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err);
+		return err;
 	}
+	/*
+	 * Dynamically allocate info and par
+	 */
+	info = framebuffer_alloc(sizeof(struct pm3_par), device);
 
-	(*bn) = simple_strtoul(options, &next, 10);
-
-	if (next && (next[0] == ':') && ((*bn) >= 0)
-	    && ((*bn) <= PM3_MAX_BOARD)) {
-		DPRINTK(2, "Board_num seen as %ld\n", (*bn));
-		return (next + 1);
-	} else {
-		(*bn) = 0;
-		DPRINTK(2, "Board_num default to %ld\n", (*bn));
-		return (options);
-	}
-}
+	if (!info)
+		return -ENOMEM;
+	par = info->par;
 
-static void pm3fb_real_setup(char *options)
-{
-	char *next;
-	unsigned long i, bn;
-	struct pm3fb_info *l_fb_info;
-
-	DTRACE;
-
-	DPRINTK(2, "Options : %s\n", options);
-
-	for (i = 0; i < PM3_MAX_BOARD; i++) {
-		l_fb_info = &(fb_info[i]);
-		memset(l_fb_info, 0, sizeof(struct pm3fb_info));
-		l_fb_info->gen.fbhw = &pm3fb_switch;
-		l_fb_info->board_num = i;
-		current_par_valid[i] = 0;
-		slot[i] = -1;
-		func[i] = -1;
-		bus[i] = -1;
-		disable[i] = 0;
-		noaccel[i] = 0;
-		fontn[i][0] = '\0';
-		depth[i] = 0;
-		l_fb_info->current_par = &(current_par[i]);
+	/*
+	 * Here we set the screen_base to the virtual memory address
+	 * for the framebuffer.
+	 */
+	pm3fb_fix.mmio_start = pci_resource_start(dev, 0);
+	pm3fb_fix.mmio_len = PM3_REGS_SIZE;
+
+	/* Registers - request region and map it. */
+	if (!request_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len,
+				 "pm3fb regbase")) {
+		printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n");
+		goto err_exit_neither;
+	}
+	par->v_regs =
+		ioremap_nocache(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
+	if (!par->v_regs) {
+		printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n",
+			pm3fb_fix.id);
+		release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
+		goto err_exit_neither;
+	}
+
+#if defined(__BIG_ENDIAN)
+	pm3fb_fix.mmio_start += PM3_REGS_SIZE;
+	DPRINTK("Adjusting register base for big-endian.\n");
+#endif
+	/* Linear frame buffer - request region and map it. */
+	pm3fb_fix.smem_start = pci_resource_start(dev, 1);
+	pm3fb_fix.smem_len = pm3fb_size_memory(par);
+	if (!pm3fb_fix.smem_len)
+	{
+		printk(KERN_WARNING "pm3fb: Can't find memory on board.\n");
+		goto err_exit_mmio;
 	}
-
-	/* eat up prefix pm3fb and whatever is used as separator i.e. :,= */
-	if (!strncmp(options, "pm3fb", 5)) {
-		options += 5;
-		while (((*options) == ',') || ((*options) == ':')
-		       || ((*options) == '='))
-			options++;
+	if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
+				 "pm3fb smem")) {
+		printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
+		goto err_exit_mmio;
 	}
-
-	while (options) {
-		bn = 0;
-		if ((next = strchr(options, ','))) {
-			(*next) = '\0';
-			next++;
-		}
-
-		if (!strncmp(options, "mode:", 5)) {
-			options = pm3fb_boardnum_setup(options + 5, &bn);
-			DPRINTK(2, "Setting mode for board #%ld\n", bn);
-			pm3fb_mode_setup(options, bn);
-		} else if (!strncmp(options, "off:", 4)) {
-			options = pm3fb_boardnum_setup(options + 4, &bn);
-			DPRINTK(2, "Disabling board #%ld\n", bn);
-			disable[bn] = 1;
-		} else if (!strncmp(options, "off", 3)) {	/* disable everything */
-			for (i = 0; i < PM3_MAX_BOARD; i++)
-				disable[i] = 1;
-		} else if (!strncmp(options, "disable:", 8)) {
-			options = pm3fb_boardnum_setup(options + 8, &bn);
-			DPRINTK(2, "Disabling board #%ld\n", bn);
-			disable[bn] = 1;
-		} else if (!strncmp(options, "pciid:", 6)) {
-			options = pm3fb_boardnum_setup(options + 6, &bn);
-			DPRINTK(2, "Setting PciID for board #%ld\n", bn);
-			pm3fb_pciid_setup(options, bn);
-		} else if (!strncmp(options, "noaccel:", 8)) {
-			options = pm3fb_boardnum_setup(options + 8, &bn);
-			noaccel[bn] = 1;
-		} else if (!strncmp(options, "font:", 5)) {
-			options = pm3fb_boardnum_setup(options + 5, &bn);
-			pm3fb_font_setup(options, bn);
-		} else if (!strncmp(options, "depth:", 6)) {
-			options = pm3fb_boardnum_setup(options + 6, &bn);
-			pm3fb_bootdepth_setup(options, bn);
-		} else if (!strncmp(options, "printtimings", 12)) {
-			printtimings = 1;
-		} else if (!strncmp(options, "flatpanel:", 10)) {
-			options = pm3fb_boardnum_setup(options + 10, &bn);
-			flatpanel[bn] = 1;
-		} else if (!strncmp(options, "forcesize:", 10)) {
-			options = pm3fb_boardnum_setup(options + 10, &bn);
-			pm3fb_forcesize_setup(options, bn);
-		}
-		options = next;
+	info->screen_base =
+		ioremap_nocache(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+	if (!info->screen_base) {
+		printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
+		release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+		goto err_exit_mmio;
 	}
-}
+	info->screen_size = pm3fb_fix.smem_len;
 
-/* ********************************************** */
-/* ***** framebuffer API standard functions ***** */
-/* ********************************************** */
+	info->fbops = &pm3fb_ops;
 
-static int pm3fb_encode_fix(struct fb_fix_screeninfo *fix,
-			    const void *par, struct fb_info_gen *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-	struct pm3fb_par *p = (struct pm3fb_par *) par;
-
-	DTRACE;
-
-	strcpy(fix->id, permedia3_name);
-	fix->smem_start = (unsigned long)l_fb_info->p_fb;
-	fix->smem_len = l_fb_info->fb_size;
-	fix->mmio_start = (unsigned long)l_fb_info->pIOBase;
-	fix->mmio_len = PM3_REGS_SIZE;
-#ifdef PM3FB_USE_ACCEL
-	if (!(noaccel[l_fb_info->board_num]))
-		fix->accel = FB_ACCEL_3DLABS_PERMEDIA3;
-	else
-#endif /* PM3FB_USE_ACCEL */
-		fix->accel = FB_ACCEL_NONE;
-	fix->type = FB_TYPE_PACKED_PIXELS;
-	fix->visual =
-	    (p->depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	if (current_par_valid[l_fb_info->board_num])
-		fix->line_length =
-			l_fb_info->current_par->width *
-			depth2ByPP(l_fb_info->current_par->depth);
-	else
-		fix->line_length = 0;
-	fix->xpanstep = 64 / depth2bpp(p->depth);
-	fix->ypanstep = 1;
-	fix->ywrapstep = 0;
-	return (0);
-}
-
-static int pm3fb_decode_var(const struct fb_var_screeninfo *var,
-			    void *par, struct fb_info_gen *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-	struct pm3fb_par *p = (struct pm3fb_par *) par;
-	struct pm3fb_par temp_p;
-	u32 xres;
-
-	DTRACE;
-
-	DASSERT((var != NULL), "fb_var_screeninfo* not NULL");
-	DASSERT((p != NULL), "pm3fb_par* not NULL");
-	DASSERT((l_fb_info != NULL), "pm3fb_info* not NULL");
-
-	memset(&temp_p, 0, sizeof(struct pm3fb_par));
-	temp_p.width = (var->xres_virtual + 7) & ~7;
-	temp_p.height = var->yres_virtual;
-
-	if (!(depth_supported(var->bits_per_pixel))) /* round unsupported up to a multiple of 8 */
-		temp_p.depth = depth2bpp(var->bits_per_pixel);
-	else
-		temp_p.depth = var->bits_per_pixel;
+	par->video = PM3_READ_REG(par, PM3VideoControl);
 
-	temp_p.depth = (temp_p.depth > 32) ? 32 : temp_p.depth; /* max 32 */
-	temp_p.depth = (temp_p.depth == 24) ? 32 : temp_p.depth; /* 24 unsupported, round-up to 32 */
+	info->fix = pm3fb_fix;
+	info->pseudo_palette = par->palette;
+	info->flags = FBINFO_DEFAULT;/* | FBINFO_HWACCEL_YPAN;*/
 
-	if ((temp_p.depth == 16) && (var->red.length == 5) && (var->green.length == 5) && (var->blue.length == 5))
-		temp_p.depth = 15; /* RGBA 5551 is stored as depth 15 */
-
-	if ((temp_p.depth == 16) && (var->red.length == 4) && (var->green.length == 4) && (var->blue.length == 4))
-		temp_p.depth = 12; /* RGBA 4444  is stored as depth 12 */
-
-
-	DPRINTK(2,
-		"xres: %d, yres: %d, vxres: %d, vyres: %d ; xoffset:%d, yoffset: %d\n",
-		var->xres, var->yres, var->xres_virtual, var->yres_virtual,
-		var->xoffset, var->yoffset);
+	/*
+	 * This should give a reasonable default video mode. The following is
+	 * done when we can set a video mode.
+	 */
+	if (!mode_option)
+		mode_option = "640x480@60";
 
-	xres = (var->xres + 31) & ~31;
-	if (temp_p.width < xres + var->xoffset)
-		temp_p.width = xres + var->xoffset;
-	if (temp_p.height < var->yres + var->yoffset)
-		temp_p.height = var->yres + var->yoffset;
+	retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
 
-	if (temp_p.width > 2048) {
-		DPRINTK(1, "virtual width not supported: %u\n",
-			temp_p.width);
-		return (-EINVAL);
-	}
-	if (var->yres < 200) {
-		DPRINTK(1, "height not supported: %u\n", (u32) var->yres);
-		return (-EINVAL);
-	}
-	if (temp_p.height < 200 || temp_p.height > 4095) {
-		DPRINTK(1, "virtual height not supported: %u\n",
-			temp_p.height);
-		return (-EINVAL);
+	if (!retval || retval == 4) {
+		retval = -EINVAL;
+		goto err_exit_both;
 	}
-	if (!(depth_supported(temp_p.depth))) {
-		DPRINTK(1, "depth not supported: %u\n", temp_p.depth);
-		return (-EINVAL);
-	}
-	if ((temp_p.width * temp_p.height * depth2ByPP(temp_p.depth)) >
-	    l_fb_info->fb_size) {
-		DPRINTK(1, "no memory for screen (%ux%ux%u)\n",
-			temp_p.width, temp_p.height, temp_p.depth);
-		return (-EINVAL);
-	}
-
-	if ((!var->pixclock) ||
-	    (!var->right_margin) ||
-	    (!var->hsync_len) ||
-	    (!var->left_margin) ||
-	    (!var->lower_margin) ||
-	    (!var->vsync_len) || (!var->upper_margin)
-	    ) {
-		unsigned long i = 0, done = 0;
-		printk(KERN_WARNING "pm3fb: refusing to use a likely wrong timing\n");
-
-		while ((mode_base[i].user_mode.width) && !done) {
-			if ((mode_base[i].user_mode.width == temp_p.width)
-			    && (mode_base[i].user_mode.height ==
-				temp_p.height)) {
-				printk(KERN_NOTICE "pm3fb: using close match %s\n",
-				       mode_base[i].name);
-				temp_p = mode_base[i].user_mode;
-				done = 1;
-			}
-			i++;
-		}
-		if (!done)
-			return (-EINVAL);
-	} else {
-		temp_p.pixclock = PICOS2KHZ(var->pixclock);
-		if (temp_p.pixclock > PM3_MAX_PIXCLOCK) {
-			DPRINTK(1, "pixclock too high (%uKHz)\n",
-				temp_p.pixclock);
-			return (-EINVAL);
-		}
-
-		temp_p.hsstart = var->right_margin;
-		temp_p.hsend = var->right_margin + var->hsync_len;
-		temp_p.hbend =
-		    var->right_margin + var->hsync_len + var->left_margin;
-		temp_p.htotal = xres + temp_p.hbend;
-
-		temp_p.vsstart = var->lower_margin;
-		temp_p.vsend = var->lower_margin + var->vsync_len;
-		temp_p.vbend =
-		    var->lower_margin + var->vsync_len + var->upper_margin;
-		temp_p.vtotal = var->yres + temp_p.vbend;
-
-		temp_p.stride = temp_p.width;
-
-		DPRINTK(2, "Using %d * %d, %d Khz, stride is %08x\n",
-			temp_p.width, temp_p.height, temp_p.pixclock,
-			temp_p.stride);
-
-		temp_p.base =
-		    pm3fb_Shiftbpp(l_fb_info, temp_p.depth,
-				   (var->yoffset * xres) + var->xoffset);
-
-		temp_p.video = 0;
-
-		if (var->sync & FB_SYNC_HOR_HIGH_ACT)
-			temp_p.video |= PM3VideoControl_HSYNC_ACTIVE_HIGH;
-		else
-			temp_p.video |= PM3VideoControl_HSYNC_ACTIVE_LOW;
-
-		if (var->sync & FB_SYNC_VERT_HIGH_ACT)
-			temp_p.video |= PM3VideoControl_VSYNC_ACTIVE_HIGH;
-		else
-			temp_p.video |= PM3VideoControl_VSYNC_ACTIVE_LOW;
-
-		if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
-			DPRINTK(1, "Interlaced mode not supported\n\n");
-			return (-EINVAL);
-		}
-
-		if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
-			temp_p.video |= PM3VideoControl_LINE_DOUBLE_ON;
-		else
-			temp_p.video |= PM3VideoControl_LINE_DOUBLE_OFF;
-
-		if (var->activate == FB_ACTIVATE_NOW)
-			temp_p.video |= PM3VideoControl_ENABLE;
-		else {
-			temp_p.video |= PM3VideoControl_DISABLE;
-			DPRINTK(2, "PM3Video disabled\n");
-		}
 
-		switch (temp_p.depth) {
-		case 8:
-			temp_p.video |= PM3VideoControl_PIXELSIZE_8BIT;
-			break;
-		case 12:
-		case 15:
-		case 16:
-			temp_p.video |= PM3VideoControl_PIXELSIZE_16BIT;
-			break;
-		case 32:
-			temp_p.video |= PM3VideoControl_PIXELSIZE_32BIT;
-			break;
-		default:
-			DPRINTK(1, "Unsupported depth\n");
-			break;
-		}
+	/* This has to been done !!! */
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		retval = -ENOMEM;
+		goto err_exit_both;
 	}
-	(*p) = temp_p;
 
-#ifdef PM3FB_USE_ACCEL
-	if (var->accel_flags & FB_ACCELF_TEXT)
-		noaccel[l_fb_info->board_num] = 0;
-	else
-		noaccel[l_fb_info->board_num] = 1;
-#endif /* PM3FB_USE_ACCEL */
-
-	return (0);
-}
-
-static void pm3fb_encode_depth(struct fb_var_screeninfo *var, long d)
-{
-	switch (d) {
-	case 8:
-		var->red.length = var->green.length = var->blue.length = 8;
-		var->red.offset = var->green.offset = var->blue.offset = 0;
-		var->transp.offset = var->transp.length = 0;
-		break;
-
-	case 12:
-		var->red.offset = 8;
-		var->red.length = 4;
-		var->green.offset = 4;
-		var->green.length = 4;
-		var->blue.offset = 0;
-		var->blue.length = 4;
-		var->transp.offset = 12;
-		var->transp.length = 4;
-		break;
-
-	case 15:
-		var->red.offset = 10;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 5;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		var->transp.offset = 15;
-		var->transp.length = 1;
-		break;
-
-	case 16:
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 6;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		var->transp.offset = var->transp.length = 0;
-		break;
-
-	case 32:
-		var->transp.offset = 24;
-		var->red.offset = 16;
-		var->green.offset = 8;
-		var->blue.offset = 0;
-		var->red.length = var->green.length =
-			var->blue.length = var->transp.length = 8;
-		break;
+	/*
+	 * For drivers that can...
+	 */
+	pm3fb_check_var(&info->var, info);
 
-	default:
-		DPRINTK(1, "Unsupported depth %ld\n", d);
-		break;
+	if (register_framebuffer(info) < 0) {
+		retval = -EINVAL;
+		goto err_exit_all;
 	}
-}
-
-static int pm3fb_encode_var(struct fb_var_screeninfo *var,
-			    const void *par, struct fb_info_gen *info)
-{
-	struct pm3fb_par *p = (struct pm3fb_par *) par;
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
-	u32 base;
-
-	DTRACE;
-
-	DASSERT((var != NULL), "fb_var_screeninfo* not NULL");
-	DASSERT((p != NULL), "pm3fb_par* not NULL");
-	DASSERT((info != NULL), "fb_info_gen* not NULL");
-
-	memset(var, 0, sizeof(struct fb_var_screeninfo));
-
-#ifdef PM3FB_USE_ACCEL
-	if (!(noaccel[l_fb_info->board_num]))
-		var->accel_flags |= FB_ACCELF_TEXT;
-#endif /* PM3FB_USE_ACCEL */
-
-	var->xres_virtual = p->width;
-	var->yres_virtual = p->height;
-	var->xres = p->htotal - p->hbend;
-	var->yres = p->vtotal - p->vbend;
-
-	DPRINTK(2, "xres = %d, yres : %d\n", var->xres, var->yres);
-
-	var->right_margin = p->hsstart;
-	var->hsync_len = p->hsend - p->hsstart;
-	var->left_margin = p->hbend - p->hsend;
-	var->lower_margin = p->vsstart;
-	var->vsync_len = p->vsend - p->vsstart;
-	var->upper_margin = p->vbend - p->vsend;
-	var->bits_per_pixel = depth2bpp(p->depth);
-	
-	pm3fb_encode_depth(var, p->depth);
-
-	base = pm3fb_Unshiftbpp(l_fb_info, p->depth, p->base);
-
-	var->xoffset = base % var->xres;
-	var->yoffset = base / var->xres;
-
-	var->height = var->width = -1;
-
-	var->pixclock = KHZ2PICOS(p->pixclock);
-
-	if ((p->video & PM3VideoControl_HSYNC_MASK) ==
-	    PM3VideoControl_HSYNC_ACTIVE_HIGH)
-		var->sync |= FB_SYNC_HOR_HIGH_ACT;
-	if ((p->video & PM3VideoControl_VSYNC_MASK) ==
-	    PM3VideoControl_VSYNC_ACTIVE_HIGH)
-		var->sync |= FB_SYNC_VERT_HIGH_ACT;
-	if (p->video & PM3VideoControl_LINE_DOUBLE_ON)
-		var->vmode = FB_VMODE_DOUBLE;
-
-	return (0);
-}
-
-static void pm3fb_get_par(void *par, struct fb_info_gen *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
-	DTRACE;
+	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	   info->fix.id);
+	pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
+	return 0;
 
-	if (!current_par_valid[l_fb_info->board_num]) {
-		if (l_fb_info->use_current)
-			pm3fb_read_mode(l_fb_info, l_fb_info->current_par);
-		else
-			memcpy(l_fb_info->current_par,
-			       &(mode_base[0].user_mode),
-			       sizeof(struct pm3fb_par));
-		current_par_valid[l_fb_info->board_num] = 1;
-	}
-	*((struct pm3fb_par *) par) = *(l_fb_info->current_par);
+ err_exit_all:
+	fb_dealloc_cmap(&info->cmap);
+ err_exit_both:
+	iounmap(info->screen_base);
+	release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ err_exit_mmio:
+	iounmap(par->v_regs);
+	release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
+ err_exit_neither:
+	framebuffer_release(info);
+	return retval;
 }
 
-static void pm3fb_set_par(const void *par, struct fb_info_gen *info)
+	/*
+	 *  Cleanup
+	 */
+static void __devexit pm3fb_remove(struct pci_dev *dev)
 {
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
-	DTRACE;
-
-	*(l_fb_info->current_par) = *((struct pm3fb_par *) par);
-	current_par_valid[l_fb_info->board_num] = 1;
-
-	pm3fb_write_mode(l_fb_info);
+	struct fb_info *info = pci_get_drvdata(dev);
 
-#ifdef PM3FB_USE_ACCEL
-	pm3fb_init_engine(l_fb_info);
-#endif /* PM3FB_USE_ACCEL */
-}
+	if (info) {
+		struct fb_fix_screeninfo *fix = &info->fix;
+		struct pm3_par *par = info->par;
 
-static void pm3fb_set_color(struct pm3fb_info *l_fb_info,
-			    unsigned char regno, unsigned char r,
-			    unsigned char g, unsigned char b)
-{
-	DTRACE;
+		unregister_framebuffer(info);
+		fb_dealloc_cmap(&info->cmap);
 
-	PM3_SLOW_WRITE_REG(PM3RD_PaletteWriteAddress, regno);
-	PM3_SLOW_WRITE_REG(PM3RD_PaletteData, r);
-	PM3_SLOW_WRITE_REG(PM3RD_PaletteData, g);
-	PM3_SLOW_WRITE_REG(PM3RD_PaletteData, b);
-}
+		iounmap(info->screen_base);
+		release_mem_region(fix->smem_start, fix->smem_len);
+		iounmap(par->v_regs);
+		release_mem_region(fix->mmio_start, fix->mmio_len);
 
-static int pm3fb_getcolreg(unsigned regno, unsigned *red, unsigned *green,
-			   unsigned *blue, unsigned *transp,
-			   struct fb_info *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
-	DTRACE;
-
-	if (regno < 256) {
-		*red =
-		    l_fb_info->palette[regno].red << 8 | l_fb_info->
-		    palette[regno].red;
-		*green =
-		    l_fb_info->palette[regno].green << 8 | l_fb_info->
-		    palette[regno].green;
-		*blue =
-		    l_fb_info->palette[regno].blue << 8 | l_fb_info->
-		    palette[regno].blue;
-		*transp =
-		    l_fb_info->palette[regno].transp << 8 | l_fb_info->
-		    palette[regno].transp;
+		pci_set_drvdata(dev, NULL);
+		framebuffer_release(info);
 	}
-	return (regno > 255);
 }
 
-static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			   unsigned blue, unsigned transp,
-			   struct fb_info *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
+static struct pci_device_id pm3fb_id_table[] = {
+	{ PCI_VENDOR_ID_3DLABS, 0x0a,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+	  0xff0000, 0 },
+	{ 0, }
+};
 
-	DTRACE;
+/* For PCI drivers */
+static struct pci_driver pm3fb_driver = {
+	.name =		"pm3fb",
+	.id_table =	pm3fb_id_table,
+	.probe =	pm3fb_probe,
+	.remove =	__devexit_p(pm3fb_remove),
+};
 
-	if (regno < 16) {
-		switch (l_fb_info->current_par->depth) {
-#ifdef FBCON_HAS_CFB8
-		case 8:
-			break;
-#endif
-#ifdef FBCON_HAS_CFB16
-		case 12:
-			l_fb_info->cmap.cmap12[regno] =
-				(((u32) red & 0xf000) >> 4) |
-				(((u32) green & 0xf000) >> 8) |
-				(((u32) blue & 0xf000) >> 12);
-			break;
+MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
 
-		case 15:
-			l_fb_info->cmap.cmap15[regno] =
-				(((u32) red & 0xf800) >> 1) |
-				(((u32) green & 0xf800) >> 6) |
-				(((u32) blue & 0xf800) >> 11);
-			break;
-
-		case 16:
-			l_fb_info->cmap.cmap16[regno] =
-			    ((u32) red & 0xf800) |
-			    (((u32) green & 0xfc00) >> 5) |
-			    (((u32) blue & 0xf800) >> 11);
-			break;
-#endif
-#ifdef FBCON_HAS_CFB32
-		case 32:
-			l_fb_info->cmap.cmap32[regno] =
-			    (((u32) transp & 0xff00) << 16) |
-			    (((u32) red & 0xff00) << 8) |
-			    (((u32) green & 0xff00)) |
-			    (((u32) blue & 0xff00) >> 8);
-			break;
-#endif
-		default:
-			DPRINTK(1, "bad depth %u\n",
-				l_fb_info->current_par->depth);
-			break;
-		}
-	}
-	if (regno < 256) {
-		l_fb_info->palette[regno].red = red >> 8;
-		l_fb_info->palette[regno].green = green >> 8;
-		l_fb_info->palette[regno].blue = blue >> 8;
-		l_fb_info->palette[regno].transp = transp >> 8;
-		if (l_fb_info->current_par->depth == 8)
-			pm3fb_set_color(l_fb_info, regno, red >> 8,
-					green >> 8, blue >> 8);
-	}
-	return (regno > 255);
-}
-
-static int pm3fb_blank(int blank_mode, struct fb_info_gen *info)
+int __init pm3fb_init(void)
 {
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-	u32 video;
-
-	DTRACE;
-
-	if (!current_par_valid[l_fb_info->board_num])
-		return (1);
-
-	video = l_fb_info->current_par->video;
-
 	/*
-	 * Oxygen VX1 - it appears that setting PM3VideoControl and
-	 * then PM3RD_SyncControl to the same SYNC settings undoes
-	 * any net change - they seem to xor together.  Only set the
-	 * sync options in PM3RD_SyncControl.  --rmk
+	 *  For kernel boot options (in 'video=pm3fb:<options>' format)
 	 */
-	video &= ~(PM3VideoControl_HSYNC_MASK |
-		   PM3VideoControl_VSYNC_MASK);
-	video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
-		 PM3VideoControl_VSYNC_ACTIVE_HIGH;
-
-	if (blank_mode > 0) {
-		switch (blank_mode - 1) {
-
-		case VESA_NO_BLANKING:	/* FIXME */
-			video = video & ~(PM3VideoControl_ENABLE);
-			break;
-
-		case VESA_HSYNC_SUSPEND:
-			video = video & ~(PM3VideoControl_HSYNC_MASK |
-					  PM3VideoControl_BLANK_ACTIVE_LOW);
-			break;
-		case VESA_VSYNC_SUSPEND:
-			video = video & ~(PM3VideoControl_VSYNC_MASK |
-					  PM3VideoControl_BLANK_ACTIVE_LOW);
-			break;
-		case VESA_POWERDOWN:
-			video = video & ~(PM3VideoControl_HSYNC_MASK |
-					  PM3VideoControl_VSYNC_MASK |
-					  PM3VideoControl_BLANK_ACTIVE_LOW);
-			break;
-		default:
-			DPRINTK(1, "Unsupported blanking %d\n",
-				blank_mode);
-			return (1);
-			break;
-		}
-	}
-
-	PM3_SLOW_WRITE_REG(PM3VideoControl, video);
+#ifndef MODULE
+	char *option = NULL;
 
-	return (0);
-}
-
-static void pm3fb_set_disp(const void *par, struct display *disp,
-			   struct fb_info_gen *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-	struct pm3fb_par *p = (struct pm3fb_par *) par;
-	u32 flags;
-
-	DTRACE;
-
-	local_irq_save(flags);
-	info->info.screen_base = l_fb_info->v_fb;
-	switch (p->depth) {
-#ifdef FBCON_HAS_CFB8
-	case 8:
-#ifdef PM3FB_USE_ACCEL
-		if (!(noaccel[l_fb_info->board_num]))
-			disp->dispsw = &pm3fb_cfb8;
-		else
-#endif /* PM3FB_USE_ACCEL */
-			disp->dispsw = &fbcon_cfb8;
-		break;
+	if (fb_get_options("pm3fb", &option))
+		return -ENODEV;
+	pm3fb_setup(option);
 #endif
-#ifdef FBCON_HAS_CFB16
-	case 12:
-#ifdef PM3FB_USE_ACCEL
-		if (!(noaccel[l_fb_info->board_num]))
-			disp->dispsw = &pm3fb_cfb16;
-		else
-#endif /* PM3FB_USE_ACCEL */
-			disp->dispsw = &fbcon_cfb16;
-		disp->dispsw_data = l_fb_info->cmap.cmap12;
-		break;
-	case 15:
-#ifdef PM3FB_USE_ACCEL
-		if (!(noaccel[l_fb_info->board_num]))
-			disp->dispsw = &pm3fb_cfb16;
-		else
-#endif /* PM3FB_USE_ACCEL */
-			disp->dispsw = &fbcon_cfb16;
-		disp->dispsw_data = l_fb_info->cmap.cmap15;
-		break;
-	case 16:
-#ifdef PM3FB_USE_ACCEL
-		if (!(noaccel[l_fb_info->board_num]))
-			disp->dispsw = &pm3fb_cfb16;
-		else
-#endif /* PM3FB_USE_ACCEL */
-			disp->dispsw = &fbcon_cfb16;
-		disp->dispsw_data = l_fb_info->cmap.cmap16;
-		break;
-#endif
-#ifdef FBCON_HAS_CFB32
-	case 32:
-#ifdef PM3FB_USE_ACCEL
-		if (!(noaccel[l_fb_info->board_num]))
-			disp->dispsw = &pm3fb_cfb32;
-		else
-#endif /* PM3FB_USE_ACCEL */
-			disp->dispsw = &fbcon_cfb32;
-		disp->dispsw_data = l_fb_info->cmap.cmap32;
-		break;
-#endif /* FBCON_HAS_CFB32 */
-	default:
-		disp->dispsw = &fbcon_dummy;
-		DPRINTK(1, "Invalid depth, using fbcon_dummy\n");
-		break;
-	}
-	local_irq_restore(flags);
-}
-
-/* */
-static void pm3fb_detect(void)
-{
-	struct pci_dev *dev_array[PM3_MAX_BOARD];
-	struct pci_dev *dev = NULL;
-	struct pm3fb_info *l_fb_info = &(fb_info[0]);
-	unsigned long i, j, done;
-
-	DTRACE;
-
-	for (i = 0; i < PM3_MAX_BOARD; i++) {
-		dev_array[i] = NULL;
-		fb_info[i].dev = NULL;
-	}
-
-	dev = pci_get_device(PCI_VENDOR_ID_3DLABS,
-			    PCI_DEVICE_ID_3DLABS_PERMEDIA3, dev);
-
-	for (i = 0; ((i < PM3_MAX_BOARD) && dev); i++) {
-		dev_array[i] = dev;
-		dev = pci_get_device(PCI_VENDOR_ID_3DLABS,
-				    PCI_DEVICE_ID_3DLABS_PERMEDIA3, dev);
-	}
-
-	if (dev) {		/* more than PM3_MAX_BOARD */
-		printk(KERN_WARNING "pm3fb: Warning: more than %d boards found\n",
-		       PM3_MAX_BOARD);
-	}
-
-	if (!dev_array[0]) {	/* not a single board, abort */
-		return;
-	}
-
-	/* allocate user-defined boards */
-	for (i = 0; i < PM3_MAX_BOARD; i++) {
-		if ((bus[i] >= 0) && (slot[i] >= 0) && (func[i] >= 0)) {
-			for (j = 0; j < PM3_MAX_BOARD; j++) {
-				if ((dev_array[j] != NULL) &&
-				    (dev_array[j]->bus->number == bus[i])
-				    && (PCI_SLOT(dev_array[j]->devfn) ==
-					slot[i])
-				    && (PCI_FUNC(dev_array[j]->devfn) ==
-					func[i])) {
-					fb_info[i].dev = dev_array[j];
-					dev_array[j] = NULL;
-				}
-			}
-		}
-	}
-	/* allocate remaining boards */
-	for (i = 0; i < PM3_MAX_BOARD; i++) {
-		if (fb_info[i].dev == NULL) {
-			done = 0;
-			for (j = 0; ((j < PM3_MAX_BOARD) && (!done)); j++) {
-				if (dev_array[j] != NULL) {
-					fb_info[i].dev = dev_array[j];
-					dev_array[j] = NULL;
-					done = 1;
-				}
-			}
-		}
-	}
-
-	/* at that point, all PCI Permedia3 are detected and allocated */
-	/* now, initialize... or not */
-	for (i = 0; i < PM3_MAX_BOARD; i++) {
-		l_fb_info = &(fb_info[i]);
-		if (l_fb_info->dev && !disable[i]) {	/* PCI device was found and not disabled by user */
-			DPRINTK(2,
-				"found @%lx Vendor %lx Device %lx ; base @ : %lx - %lx - %lx - %lx - %lx - %lx, irq %ld\n",
-				(unsigned long) l_fb_info->dev,
-				(unsigned long) l_fb_info->dev->vendor,
-				(unsigned long) l_fb_info->dev->device,
-				(unsigned long)
-				pci_resource_start(l_fb_info->dev, 0),
-				(unsigned long)
-				pci_resource_start(l_fb_info->dev, 1),
-				(unsigned long)
-				pci_resource_start(l_fb_info->dev, 2),
-				(unsigned long)
-				pci_resource_start(l_fb_info->dev, 3),
-				(unsigned long)
-				pci_resource_start(l_fb_info->dev, 4),
-				(unsigned long)
-				pci_resource_start(l_fb_info->dev, 5),
-				(unsigned long) l_fb_info->dev->irq);
-
-			l_fb_info->pIOBase =
-			    (unsigned char *)
-			    pci_resource_start(l_fb_info->dev, 0);
-#ifdef __BIG_ENDIAN
-			l_fb_info->pIOBase += PM3_REGS_SIZE;
-#endif
-			l_fb_info->vIOBase = (unsigned char *) -1;
-			l_fb_info->p_fb =
-			    (unsigned char *)
-			    pci_resource_start(l_fb_info->dev, 1);
-			l_fb_info->v_fb = (unsigned char *) -1;
-
-				if (!request_mem_region
-			    ((unsigned long)l_fb_info->p_fb, 64 * 1024 * 1024, /* request full aperture size */
-			     "pm3fb")) {
-				printk
-				    (KERN_ERR "pm3fb: Error: couldn't request framebuffer memory, board #%ld\n",
-				     l_fb_info->board_num);
-				continue;
-			}
-			if (!request_mem_region
-			    ((unsigned long)l_fb_info->pIOBase, PM3_REGS_SIZE,
-			     "pm3fb I/O regs")) {
-				printk
-				    (KERN_ERR "pm3fb: Error: couldn't request IObase memory, board #%ld\n",
-				     l_fb_info->board_num);
-				continue;
-			}
-			if (forcesize[l_fb_info->board_num])
-				l_fb_info->fb_size = forcesize[l_fb_info->board_num];
-
-			l_fb_info->fb_size =
-			    pm3fb_size_memory(l_fb_info);
-				if (l_fb_info->fb_size) {
-				(void) pci_enable_device(l_fb_info->dev);
-				pm3fb_common_init(l_fb_info);
-			} else
-				printk(KERN_ERR "pm3fb: memory problem, not enabling board #%ld\n", l_fb_info->board_num);
-		}
-	}
-}
-
-static int pm3fb_pan_display(const struct fb_var_screeninfo *var,
-			     struct fb_info_gen *info)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
-	DTRACE;
-
-	if (!current_par_valid[l_fb_info->board_num])
-		return -EINVAL;
-
-	l_fb_info->current_par->base =	/* in 128 bits chunk - i.e. AFTER Shiftbpp */
-	    pm3fb_Shiftbpp(l_fb_info,
-			   l_fb_info->current_par->depth,
-			   (var->yoffset * l_fb_info->current_par->width) +
-			   var->xoffset);
-	PM3_SLOW_WRITE_REG(PM3ScreenBase, l_fb_info->current_par->base);
-	return 0;
-}
 
-static int pm3fb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
-{
-	struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-	u32 cm, i;
-#ifdef PM3FB_MASTER_DEBUG
-	char cc[3];
-#endif /* PM3FB_MASTER_DEBUG */
-
-	switch(cmd)
-	{
-#ifdef PM3FB_MASTER_DEBUG
-	case PM3FBIO_CLEARMEMORY:
-		if (copy_from_user(&cm, (void *)arg, sizeof(u32)))
-			return(-EFAULT);
-		pm3fb_clear_memory(l_fb_info, cm);
-		return(0);
-		break;
-
-	case PM3FBIO_CLEARCMAP:
-		if (copy_from_user(cc, (void*)arg, 3 * sizeof(char)))
-			return(-EFAULT);
-		pm3fb_clear_colormap(l_fb_info, cc[0], cc[1], cc[2]);
-		return(0);
-		break;
-#endif /* PM3FB_MASTER_DEBUG */
-
-	case PM3FBIO_RESETCHIP:
-		cm = 1;
-		PM3_SLOW_WRITE_REG(PM3ResetStatus, 1);
-		for (i = 0 ; (i < 10000) && cm ; i++)
-		{
-			PM3_DELAY(10);
-			cm = PM3_READ_REG(PM3ResetStatus);
-		}
-		if (cm)
-		{
-			printk(KERN_ERR "pm3fb: chip reset failed with status 0x%x\n", cm);
-			return(-EIO);
-		}
-		/* first thing first, reload memory timings */
-		pm3fb_write_memory_timings(l_fb_info);
-#ifdef PM3FB_USE_ACCEL
-		pm3fb_init_engine(l_fb_info);
-#endif /* PM3FB_USE_ACCEL */
-		pm3fb_write_mode(l_fb_info);
-		return(0);
-		break;
-
-	default:
-		DPRINTK(2, "unknown ioctl: %d (%x)\n", cmd, cmd);
-		return(-EINVAL);
-	}
+	return pci_register_driver(&pm3fb_driver);
 }
 
-/* ****************************************** */
-/* ***** standard FB API init functions ***** */
-/* ****************************************** */
-
-int __init pm3fb_setup(char *options)
+static void __exit pm3fb_exit(void)
 {
-	long opsi = strlen(options);
-
-	DTRACE;
-
-	memcpy(g_options, options,
-	       ((opsi + 1) >
-		PM3_OPTIONS_SIZE) ? PM3_OPTIONS_SIZE : (opsi + 1));
-	g_options[PM3_OPTIONS_SIZE - 1] = 0;
-
-	return (0);
+	pci_unregister_driver(&pm3fb_driver);
 }
 
-int __init pm3fb_init(void)
-{
-	DTRACE;
-
-	DPRINTK(2, "This is pm3fb.c, CVS version: $Header: /cvsroot/linux/drivers/video/pm3fb.c,v 1.1 2002/02/25 19:11:06 marcelo Exp $");
-
-	pm3fb_real_setup(g_options);
-
-	pm3fb_detect();
-
-	if (!fb_info[0].dev) {	/* not even one board ??? */
-		DPRINTK(1, "No PCI Permedia3 board detected\n");
-	}
-	return (0);
-}
-
-/* ************************* */
-/* **** Module support ***** */
-/* ************************* */
-
 #ifdef MODULE
-MODULE_AUTHOR("Romain Dolbeau");
-MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
-static char *mode[PM3_MAX_BOARD];
-module_param_array(mode, charp, NULL, 0);
-MODULE_PARM_DESC(mode,"video mode");
-module_param_array(disable, short, NULL, 0);
-MODULE_PARM_DESC(disable,"disable board");
-static short off[PM3_MAX_BOARD];
-module_param_array(off, short, NULL, 0);
-MODULE_PARM_DESC(off,"disable board");
-static char *pciid[PM3_MAX_BOARD];
-module_param_array(pciid, charp, NULL, 0);
-MODULE_PARM_DESC(pciid,"board PCI Id");
-module_param_array(noaccel, short, NULL, 0);
-MODULE_PARM_DESC(noaccel,"disable accel");
-static char *font[PM3_MAX_BOARD];
-module_param_array(font, charp, NULL, 0);
-MODULE_PARM_DESC(font,"choose font");
-module_param(depth, short, NULL, 0);
-MODULE_PARM_DESC(depth,"boot-time depth");
-module_param(printtimings, short, NULL, 0);
-MODULE_PARM_DESC(printtimings, "print the memory timings of the card(s)");
-module_param(forcesize, short, NULL, 0);
-MODULE_PARM_DESC(forcesize, "force specified memory size");
-/*
-MODULE_SUPPORTED_DEVICE("Permedia3 PCI boards")
-MODULE_GENERIC_TABLE(gtype,name)
-MODULE_DEVICE_TABLE(type,name)
-*/
-
-void pm3fb_build_options(void)
-{
-	int i;
-	char ts[128];
-
-	strcpy(g_options, "pm3fb");
-	for (i = 0; i < PM3_MAX_BOARD ; i++)
-	{
-		if (mode[i])
-		{
-			sprintf(ts, ",mode:%d:%s", i, mode[i]);
-			strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
-		}
-		if (disable[i] || off[i])
-		{
-			sprintf(ts, ",disable:%d:", i);
-			strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
-		}
-		if (pciid[i])
-		{
-			sprintf(ts, ",pciid:%d:%s", i, pciid[i]);
-			strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
-		}
-		if (noaccel[i])
-		{
-			sprintf(ts, ",noaccel:%d:", i);
-			strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
-		}
-		if (font[i])
-		{
-			sprintf(ts, ",font:%d:%s", i, font[i]);
-			strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
-		}
-		if (depth[i])
-		{
-			sprintf(ts, ",depth:%d:%d", i, depth[i]);
-			strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
-		}
-	}
-	g_options[PM3_OPTIONS_SIZE - 1] = '\0';
-	DPRINTK(1, "pm3fb use options: %s\n", g_options);
-}
+	/*
+	 *  Setup
+	 */
 
-int init_module(void)
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+int __init pm3fb_setup(char *options)
 {
-	DTRACE;
-
-	pm3fb_build_options();
-
-	pm3fb_init();
-
+	/* Parse user speficied options (`video=pm3fb:') */
 	return 0;
 }
-
-void cleanup_module(void)
-{
-	DTRACE;
-	{
-		unsigned long i;
-		struct pm3fb_info *l_fb_info;
-		for (i = 0; i < PM3_MAX_BOARD; i++) {
-			l_fb_info = &(fb_info[i]);
-			pci_dev_put(l_fb_info->dev);
-			if (l_fb_info->dev != NULL  && !(disable[l_fb_info->board_num])) {
-				if (l_fb_info->vIOBase != (unsigned char *) -1) {
-					pm3fb_unmapIO(l_fb_info);
-					release_mem_region(l_fb_info->p_fb,
-						   l_fb_info->fb_size);
-					release_mem_region(l_fb_info->pIOBase,
-						   PM3_REGS_SIZE);
-				}
-				unregister_framebuffer(&l_fb_info->gen.info);
-			}
-		}
-	}
-}
 #endif /* MODULE */
+
+module_init(pm3fb_init);
+module_exit(pm3fb_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/include/video/pm3fb.h b/include/video/pm3fb.h
index 94c7d2da90..d52e45a1e9 100644
--- a/include/video/pm3fb.h
+++ b/include/video/pm3fb.h
@@ -7,9 +7,6 @@
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive for
  *  more details.
- *
- *  $Header: /cvsroot/linux/drivers/video/pm3fb.h,v 1.1 2002/02/25 19:11:06 marcelo Exp $
- *
  */
 
 #ifndef PM3FB_H
@@ -1119,117 +1116,10 @@
 /* ***** pm3fb useful define and macro ***** */
 /* ***************************************** */
 
-/* permedia3 -specific definitions */
-#define PM3_SCALE_TO_CLOCK(pr, fe, po) ((2 * PM3_REF_CLOCK * fe) / (pr * (1 << (po))))
-
-/* in case it's not in linux/pci.h */
-#ifndef PCI_DEVICE_ID_3DLABS_PERMEDIA3
-#define PCI_DEVICE_ID_3DLABS_PERMEDIA3 0x000a
-#endif
-
-/* max number of simultaneous board */
-#define PM3_MAX_BOARD 4
-
 /* max size of options */
 #define PM3_OPTIONS_SIZE 256
 
 /* max size of font name */
 #define PM3_FONTNAME_SIZE 40
 
-/* do we want accelerated console  */
-#define PM3FB_USE_ACCEL 1
-
-/* for driver debugging ONLY */
-/* 0 = assert only, 1 = error, 2 = info, 3+ = verbose */
-/* define PM3FB_MASTER_DEBUG 1 */
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 3)
-#define PM3FB_TRACE
-#endif /* defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 3) */
-
-#ifdef PM3FB_MASTER_DEBUG
-#define DPRINTK(l,a,b...) do { if ((l) <= PM3FB_MASTER_DEBUG) printk("pm3fb: %s: " a, __FUNCTION__ , ## b); } while (0)
-#define DASSERT(t,a,b...) do { if (!(t)) printk("pm3fb: _assert failed: %s: " a, __FUNCTION__ , ## b); } while (0)
-#ifdef PM3FB_TRACE
-#define DTRACE printk("pm3fb: _enter %s\n", __FUNCTION__)
-#else /* PM3FB_TRACE */
-#define DTRACE
-#endif /* PM3FB_TRACE */
-#else /* PM3FB_MASTER_DEBUG */
-#define DPRINTK(l,a,b...)
-#define DASSERT(t,a,b...)
-#define DTRACE
-#endif /* PM3FB_MASTER_DEBUG */
-
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
-#define PM3_SHOW_CUR_MODE pm3fb_show_cur_mode(l_fb_info)
-#else
-#define PM3_SHOW_CUR_MODE /* pm3fb_show_cur_mode() */
-#endif
-
-/* ******************************************** */
-/* ***** A bunch of register-access macro ***** */
-/* ******************************************** */
-
-#define PM3_WRITE_REG(r, v) fb_writel(v, (l_fb_info->vIOBase + r))
-#define PM3_READ_REG(r) fb_readl((l_fb_info->vIOBase + r))
-
-
-#define depth2bpp(d) ((d + 7L) & ~7L)
-#define depth2ByPP(d) (depth2bpp(d) / 8)
-
-#define depth_supported(d) ((d == 8) || (d == 12) || (d == 15) || (d == 16) || (d==32))
-
-
-#define PM3_WAIT(n) \
-do{ \
-	while(PM3_READ_REG(PM3InFIFOSpace)<(n)); \
-} while(0)
-
-#define PM3_DELAY(x) do { \
-        int delay = x; \
-        unsigned char tmp; \
-        while(delay--){tmp = PM3_READ_REG(PM3InFIFOSpace);}; \
-} while(0)
-
-#define PM3_SLOW_WRITE_REG(r,v)	\
-do{                             \
-    DASSERT((l_fb_info->vIOBase != (unsigned char*)(-1)), "l_fb_info->vIOBase mapped in slow write\n"); \
-	mb();                   \
-	PM3_WAIT(1);            \
-	mb();                   \
-    PM3_WRITE_REG(r,v);     \
-} while(0)
-
-#define PM3_SET_INDEX(index) \
-do{ \
-	PM3_SLOW_WRITE_REG(PM3RD_IndexHigh,(((index)>>8)&0xff)); \
-	PM3_SLOW_WRITE_REG(PM3RD_IndexLow,((index)&0xff)); \
-} while(0)
-
-#define PM3_WRITE_DAC_REG(r, v) \
-do { \
-     DASSERT((l_fb_info->vIOBase != (unsigned char*)(-1)), "l_fb_info->vIOBase mapped in write dac reg\n"); \
-     PM3_SET_INDEX(r); \
-     mb(); \
-     PM3_WRITE_REG(PM3RD_IndexedData, v); \
-} while (0)
-
-/* next one is really a function, added as a macro to be consistent */
-#define PM3_READ_DAC_REG(r) pm3fb_read_dac_reg(l_fb_info, r)
-
-
-#define PM3_COLOR(c) \
-do { \
-  if (l_fb_info->current_par->depth == 8) \
-    { \
-      c = (c & 0xFF); \
-      c = c | (c << 8); \
-    } \
-  if ((l_fb_info->current_par->depth == 8) || (depth2bpp(l_fb_info->current_par->depth) == 16)) \
-    { \
-      c = (c & 0xFFFF); \
-      c = c | (c << 16); \
-    } \
-} while (0)
-
 #endif /* PM3FB_H */