From: Peter Korsgaard Date: Wed, 3 Oct 2007 16:29:09 +0000 (+0200) Subject: [POWERPC] spi: mode should be "cpu-qe" instead of "qe" X-Git-Tag: v2.6.24-rc1~1450^2~62 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f023dc769c47b9158d897ee8a0278bdfe39b0115;p=linux-2.6 [POWERPC] spi: mode should be "cpu-qe" instead of "qe" Mode should be "cpu-qe" for QE in CPU mode. "qe" should be reserved for native QE mode. Signed-off-by: Peter Korsgaard Signed-off-by: Kumar Gala --- diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index ce5d67f5cb..7a6c5f2f3b 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1551,7 +1551,7 @@ platforms are moved over to use the flattened-device-tree model. Required properties: - device_type : should be "spi". - compatible : should be "fsl_spi". - - mode : the SPI operation mode, it can be "cpu" or "qe". + - mode : the SPI operation mode, it can be "cpu" or "cpu-qe". - reg : Offset and length of the register set for the device - interrupts : where a is the interrupt number and b is a field that represents an encoding of the sense and level