From: Lothar Wassmann Date: Wed, 12 Oct 2005 18:58:11 +0000 (+0100) Subject: [ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c X-Git-Tag: v2.6.14-rc5~66^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e6158b4a5647624ceb90074bfcc248ea3152c906;p=linux-2.6 [ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann Signed-off-by: Russell King --- diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 672b359b07..90c2a86c42 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -499,7 +499,7 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios, /* * Update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, quot); + uart_update_timeout(port, termios->c_cflag, baud); up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (termios->c_iflag & INPCK)