From: Li Yang Date: Tue, 3 Jul 2007 09:43:16 +0000 (+0800) Subject: [POWERPC] 83xx: USB platform code rework X-Git-Tag: v2.6.23-rc1~767^2^2~42 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e5a94af84715d142b1050c927a83dd8b1076774b;p=linux-2.6 [POWERPC] 83xx: USB platform code rework Add 831x USB platform setup code and rework 834x USB platform setup code. Move USB platform code to usb.c for different boards with CPU of the same series to share the USB initialization code. Signed-off-by: Li Yang Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 31a91b53f5..5a98f88577 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the PowerPC 83xx linux kernel. # -obj-y := misc.o +obj-y := misc.o usb.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c index 4dee22ad14..3edfe170a0 100644 --- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -48,6 +48,7 @@ static void __init mpc8313_rdb_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc831x_usb_cfg(); } void __init mpc8313_rdb_init_IRQ(void) diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 8607441c39..4c9ff9cadf 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -39,55 +39,16 @@ #include "mpc83xx.h" #define BCSR5_INT_USB 0x02 -/* Note: This is only for PB, not for PB+PIB - * On PB only port0 is connected using ULPI */ -static int mpc834x_usb_cfg(void) +static int mpc834xemds_usb_cfg(void) { - unsigned long sccr, sicrl; - void __iomem *immap; + struct device_node *np; void __iomem *bcsr_regs = NULL; u8 bcsr5; - struct device_node *np = NULL; - int port0_is_dr = 0; - - if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr")) != NULL) - port0_is_dr = 1; - if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph")) != NULL){ - if (port0_is_dr) { - printk(KERN_WARNING - "There is only one USB port on PB board! \n"); - return -1; - } else if (!port0_is_dr) - /* No usb port enabled */ - return -1; - } - - immap = ioremap(get_immrbase(), 0x1000); - if (!immap) - return -1; - - /* Configure clock */ - sccr = in_be32(immap + MPC83XX_SCCR_OFFS); - if (port0_is_dr) - sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - else - sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, sccr); - - /* Configure Pin */ - sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); - /* set port0 only */ - if (port0_is_dr) - sicrl |= MPC83XX_SICRL_USB0; - else - sicrl &= ~(MPC83XX_SICRL_USB0); - out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); - - iounmap(immap); + mpc834x_usb_cfg(); /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { + if (np) { struct resource res; of_address_to_resource(np, 0, &res); @@ -129,7 +90,7 @@ static void __init mpc834x_mds_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif - mpc834x_usb_cfg(); + mpc834xemds_usb_cfg(); } static void __init mpc834x_mds_init_IRQ(void) diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index f5c5034a84..589ee55730 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -7,6 +7,7 @@ /* System Clock Control Register */ #define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MASK 0x00f00000 #define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 #define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 #define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 @@ -16,12 +17,31 @@ /* system i/o configuration register low */ #define MPC83XX_SICRL_OFFS 0x114 -#define MPC83XX_SICRL_USB0 0x40000000 -#define MPC83XX_SICRL_USB1 0x20000000 +#define MPC834X_SICRL_USB_MASK 0x60000000 +#define MPC834X_SICRL_USB0 0x40000000 +#define MPC834X_SICRL_USB1 0x20000000 +#define MPC831X_SICRL_USB_MASK 0x00000c00 +#define MPC831X_SICRL_USB_ULPI 0x00000800 /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 -#define MPC83XX_SICRH_USB_UTMI 0x00020000 +#define MPC834X_SICRH_USB_UTMI 0x00020000 +#define MPC831X_SICRH_USB_MASK 0x000000e0 +#define MPC831X_SICRH_USB_ULPI 0x000000a0 + +/* USB Control Register */ +#define FSL_USB2_CONTROL_OFFS 0x500 +#define CONTROL_UTMI_PHY_EN 0x00000200 +#define CONTROL_REFSEL_48MHZ 0x00000080 +#define CONTROL_PHY_CLK_SEL_ULPI 0x00000400 +#define CONTROL_OTG_PORT 0x00000020 + +/* USB PORTSC Registers */ +#define FSL_USB2_PORTSC1_OFFS 0x184 +#define FSL_USB2_PORTSC2_OFFS 0x188 +#define PORTSCX_PTW_16BIT 0x10000000 +#define PORTSCX_PTS_UTMI 0x00000000 +#define PORTSCX_PTS_ULPI 0x80000000 /* * Declaration for the various functions exported by the @@ -33,5 +53,7 @@ extern int mpc83xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); +extern int mpc834x_usb_cfg(void); +extern int mpc831x_usb_cfg(void); #endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c new file mode 100644 index 0000000000..e7fdf013cd --- /dev/null +++ b/arch/powerpc/platforms/83xx/usb.c @@ -0,0 +1,181 @@ +/* + * Freescale 83xx USB SOC setup code + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Author: Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +#include +#include +#include + +#include +#include +#include + +#include "mpc83xx.h" + + +#ifdef CONFIG_MPC834x +int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl, sicrh; + void __iomem *immap; + struct device_node *np = NULL; + int port0_is_dr = 0, port1_is_dr = 0; + const void *prop, *dr_mode; + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -ENOMEM; + + /* Read registers */ + /* Note: DR and MPH must use the same clock setting in SCCR */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK; + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK; + sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI; + + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + if (np) { + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + + prop = of_get_property(np, "phy_type", NULL); + if (prop && (!strcmp(prop, "utmi") || + !strcmp(prop, "utmi_wide"))) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + sicrh |= MPC834X_SICRH_USB_UTMI; + port1_is_dr = 1; + } else if (prop && !strcmp(prop, "serial")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + port1_is_dr = 1; + } else { + sicrl |= MPC834X_SICRL_USB0; + } + } else if (prop && !strcmp(prop, "ulpi")) { + sicrl |= MPC834X_SICRL_USB0; + } else { + printk(KERN_WARNING "834x USB PHY type not supported\n"); + } + port0_is_dr = 1; + of_node_put(np); + } + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph"); + if (np) { + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + + prop = of_get_property(np, "port0", NULL); + if (prop) { + if (port0_is_dr) + printk(KERN_WARNING + "834x USB port0 can't be used by both DR and MPH!\n"); + sicrl |= MPC834X_SICRL_USB0; + } + prop = of_get_property(np, "port1", NULL); + if (prop) { + if (port1_is_dr) + printk(KERN_WARNING + "834x USB port1 can't be used by both DR and MPH!\n"); + sicrl |= MPC834X_SICRL_USB1; + } + of_node_put(np); + } + + /* Write back */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + out_be32(immap + MPC83XX_SICRH_OFFS, sicrh); + + iounmap(immap); + return 0; +} +#endif /* CONFIG_MPC834x */ + +#ifdef CONFIG_PPC_MPC831x +int mpc831x_usb_cfg(void) +{ + u32 temp; + void __iomem *immap, *usb_regs; + struct device_node *np = NULL; + const void *prop; + struct resource res; + int ret = 0; +#ifdef CONFIG_USB_OTG + const void *dr_mode; +#endif + + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + if (!np) + return -ENODEV; + prop = of_get_property(np, "phy_type", NULL); + + /* Map IMMR space for pin and clock settings */ + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) { + of_node_put(np); + return -ENOMEM; + } + + /* Configure clock */ + temp = in_be32(immap + MPC83XX_SCCR_OFFS); + temp &= ~MPC83XX_SCCR_USB_MASK; + temp |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, temp); + + /* Configure pin mux for ULPI. There is no pin mux for UTMI */ + if (!strcmp(prop, "ulpi")) { + temp = in_be32(immap + MPC83XX_SICRL_OFFS); + temp &= ~MPC831X_SICRL_USB_MASK; + temp |= MPC831X_SICRL_USB_ULPI; + out_be32(immap + MPC83XX_SICRL_OFFS, temp); + + temp = in_be32(immap + MPC83XX_SICRH_OFFS); + temp &= ~MPC831X_SICRH_USB_MASK; + temp |= MPC831X_SICRH_USB_ULPI; + out_be32(immap + MPC83XX_SICRH_OFFS, temp); + } + + iounmap(immap); + + /* Map USB SOC space */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + of_node_put(np); + return ret; + } + usb_regs = ioremap(res.start, res.end - res.start + 1); + + /* Using on-chip PHY */ + if (!strcmp(prop, "utmi_wide") || + !strcmp(prop, "utmi")) { + /* Set UTMI_PHY_EN, REFSEL to 48MHZ */ + out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, + CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ); + /* Using external UPLI PHY */ + } else if (!strcmp(prop, "ulpi")) { + /* Set PHY_CLK_SEL to ULPI */ + temp = CONTROL_PHY_CLK_SEL_ULPI; +#ifdef CONFIG_USB_OTG + /* Set OTG_PORT */ + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) + temp |= CONTROL_OTG_PORT; +#endif /* CONFIG_USB_OTG */ + out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp); + } else { + printk(KERN_WARNING "831x USB PHY type not supported\n"); + ret = -EINVAL; + } + + iounmap(usb_regs); + of_node_put(np); + return ret; +} +#endif /* CONFIG_PPC_MPC831x */