From: Andy Green Date: Thu, 9 Aug 2007 19:19:38 +0000 (-0700) Subject: USB: belkin_sa: avoid divide by zero error X-Git-Tag: v2.6.23-rc4~29^2~22 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e48eb085aca2971a1249efbb68f33e9ebca1395e;p=linux-2.6 USB: belkin_sa: avoid divide by zero error The belkin_sa module has a problem coping with a 0 return from tty_get_baud_rate() -- the subsequent BELKIN_SA_BAUD macro drivers/usb/serial/belkin_sa.h:#define BELKIN_SA_BAUD(b) (230400/b) performs a divide with it leading to the following divide error: usb 3-1: Belkin / Peracom / GoHubs USB Serial Adapter converter now attached to ttyUSB0 PM: Adding info for No Bus:usbdev3.3_ep81 PM: Adding info for No Bus:usbdev3.3_ep01 PM: Adding info for No Bus:usbdev3.3_ep82 divide error: 0000 [#1] SMP Modules linked in: vfat fat iwl3945 mac80211 cfg80211 belkin_sa usbserial usb_storage autofs4 vmnet(P) vmmon(P) aes nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables cpufreq_ondemand acpi_cpufreq video output sbs button dock battery ac arc4 snd_hda_intel ecb blkcipher snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss sr_mod snd_mixer_oss rtc_cmos cdrom iTCO_wdt iTCO_vendor_support snd_pcm rtc_core snd_timer serio_raw b44 ssb rtc_lib parport ata_piix snd soundcore snd_page_alloc mii ata_generic sg ahci libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd CPU: 1 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010246 (2.6.23-rc1 #1) EIP is at belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] eax: 00038400 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00038400 edi: 00001cb2 ebp: de49adb0 esp: de49ad6c ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process minicom (pid: 7306, ti=de49a000 task=eed6c3b0 task.ti=de49a000) Stack: d85c74f0 00000046 00000002 00000001 d85c74f0 d85c74f0 00000246 c887c658 00000001 00000cb0 00000001 00000084 00000000 d01b58c0 f6ba10e0 de49ade8 de49ae40 de49add0 f8e2526b d85c74b8 ca6e6dbc de49ae40 d85c746c eded72e8 Call Trace: [] show_trace_log_lvl+0x1a/0x2f [] show_stack_log_lvl+0x9b/0xa3 [] show_registers+0x1b8/0x289 [] die+0x113/0x246 [] do_trap+0x8a/0xa3 [] do_divide_error+0x85/0x8f [] error_code+0x72/0x78 [] serial_set_termios+0x86/0x8d [usbserial] [] set_termios+0x309/0x34c [] n_tty_ioctl+0x158/0x4ba [] tty_ioctl+0xc78/0xcd6 [] do_ioctl+0x50/0x67 [] vfs_ioctl+0x249/0x25c [] sys_ioctl+0x49/0x61 [] sysenter_past_esp+0x5f/0x99 ======================= Code: 85 c0 79 14 c7 44 24 04 67 1c dd f8 c7 04 24 d4 1e dd f8 e8 96 99 65 c7 8b 46 04 be 00 84 03 00 e8 47 11 77 c7 31 d2 89 c1 89 f0 f1 66 85 c0 89 c1 b8 01 00 00 00 0f 44 c8 8b 45 d8 85 db 8b EIP: [] belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] SS:ESP 0068:de49ad6c The small patch below should take care of this situation. Note that my kernel was tainted (vmware) but the problem will occur if tty_get_baud_rate() ever returns zero and should be taken care of. Signed-off-by: Andy Green Cc: William Greathouse Cc: Alan Cox Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index e67ce25f75..86724e8857 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -383,6 +383,10 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios } baud = tty_get_baud_rate(port->tty); + if (baud == 0) { + dbg("%s - tty_get_baud_rate says 0 baud", __FUNCTION__); + return; + } urb_value = BELKIN_SA_BAUD(baud); /* Clip to maximum speed */ if (urb_value == 0)