From: Haavard Skinnemoen Date: Mon, 12 Feb 2007 15:28:56 +0000 (+0100) Subject: [AVR32] Make I/O access macros work with external devices X-Git-Tag: v2.6.22-rc1~1131^2~10 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e3e7d8d4ea37b8372ee417452d03171c5dc55125;p=linux-2.6 [AVR32] Make I/O access macros work with external devices Fix the I/O access macros so that they work with externally connected devices accessed in little-endian mode over any bus width: * Use a set of macros to define I/O port- and memory operations borrowed from MIPS. * Allow subarchitecture to specify address- and data-mangling * Implement at32ap-specific port mangling (with build-time configurable bus width. Only one bus width at a time supported for now.) * Rewrite iowriteN and friends to use write[bwl] and friends (not the __raw counterparts.) This has been tested using pata_pcmcia to access a CompactFlash card connected to the EBI (16-bit bus width.) Signed-off-by: Haavard Skinnemoen --- diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig index d7497715cc..eb30783845 100644 --- a/arch/avr32/mach-at32ap/Kconfig +++ b/arch/avr32/mach-at32ap/Kconfig @@ -2,6 +2,30 @@ if PLATFORM_AT32AP menu "Atmel AVR32 AP options" +choice + prompt "AT32AP7000 static memory bus width" + depends on CPU_AT32AP7000 + default AP7000_16_BIT_SMC + help + Define the width of the AP7000 external static memory interface. + This is used to determine how to mangle the address and/or data + when doing little-endian port access. + + The current code can only support a single external memory bus + width for all chip selects, excluding the flash (which is using + raw access and is thus not affected by any of this.) + +config AP7000_32_BIT_SMC + bool "32 bit" + +config AP7000_16_BIT_SMC + bool "16 bit" + +config AP7000_8_BIT_SMC + bool "8 bit" + +endchoice + endmenu -endif +endif # PLATFORM_AT32AP diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h new file mode 100644 index 0000000000..ee59e401f0 --- /dev/null +++ b/include/asm-avr32/arch-at32ap/io.h @@ -0,0 +1,39 @@ +#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H +#define __ASM_AVR32_ARCH_AT32AP_IO_H + +/* For "bizarre" halfword swapping */ +#include + +#if defined(CONFIG_AP7000_32_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 3UL) +# define __swizzle_addr_w(addr) (addr ^ 2UL) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swab32(x) +#elif defined(CONFIG_AP7000_16_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 1UL) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) swahw32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swahb32(x) +#else +# define __swizzle_addr_b(addr) (addr) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) swab16(x) +# define ioswabl(a, x) swab32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) (x) +# define __mem_ioswabl(a, x) (x) +#endif + +#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index c08e810483..27b1523d42 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -1,13 +1,15 @@ #ifndef __ASM_AVR32_IO_H #define __ASM_AVR32_IO_H +#include #include - -#ifdef __KERNEL__ +#include #include #include +#include + /* virt_to_phys will only work when address is in P1 or P2 */ static __inline__ unsigned long virt_to_phys(volatile void *address) { @@ -36,204 +38,235 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); -static inline void writeb(unsigned char b, volatile void __iomem *addr) +static inline void __raw_writeb(u8 v, volatile void __iomem *addr) { - *(volatile unsigned char __force *)addr = b; + *(volatile u8 __force *)addr = v; } -static inline void writew(unsigned short b, volatile void __iomem *addr) +static inline void __raw_writew(u16 v, volatile void __iomem *addr) { - *(volatile unsigned short __force *)addr = b; + *(volatile u16 __force *)addr = v; } -static inline void writel(unsigned int b, volatile void __iomem *addr) +static inline void __raw_writel(u32 v, volatile void __iomem *addr) { - *(volatile unsigned int __force *)addr = b; + *(volatile u32 __force *)addr = v; } -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -static inline unsigned char readb(const volatile void __iomem *addr) +static inline u8 __raw_readb(const volatile void __iomem *addr) { - return *(const volatile unsigned char __force *)addr; + return *(const volatile u8 __force *)addr; } -static inline unsigned short readw(const volatile void __iomem *addr) +static inline u16 __raw_readw(const volatile void __iomem *addr) { - return *(const volatile unsigned short __force *)addr; + return *(const volatile u16 __force *)addr; } -static inline unsigned int readl(const volatile void __iomem *addr) +static inline u32 __raw_readl(const volatile void __iomem *addr) { - return *(const volatile unsigned int __force *)addr; + return *(const volatile u32 __force *)addr; +} + +/* Convert I/O port address to virtual address */ +#ifndef __io +# define __io(p) ((void *)phys_to_uncached(p)) +#endif + +/* + * Not really sure about the best way to slow down I/O on + * AVR32. Defining it as a no-op until we have an actual test case. + */ +#define SLOW_DOWN_IO do { } while (0) + +#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \ +static inline void \ +pfx##write##bwl(type val, volatile void __iomem *addr) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ + __val = pfx##ioswab##bwl(__addr, val); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ +} \ + \ +static inline type pfx##read##bwl(const volatile void __iomem *addr) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + return pfx##ioswab##bwl(__addr, __val); \ +} + +#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \ +static inline void pfx##out##bwl##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = __io(__swizzle_addr_##bwl(port)); \ + __val = pfx##ioswab##bwl(__addr, val); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwl##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = __io(__swizzle_addr_##bwl(port)); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + slow; \ + \ + return pfx##ioswab##bwl(__addr, __val); \ } -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l) -#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l) -#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l) +#define __BUILD_MEMORY_PFX(bus, bwl, type) \ + __BUILD_MEMORY_SINGLE(bus, bwl, type) + +#define BUILDIO_MEM(bwl, type) \ + __BUILD_MEMORY_PFX(, bwl, type) \ + __BUILD_MEMORY_PFX(__mem_, bwl, type) + +#define __BUILD_IOPORT_PFX(bus, bwl, type) \ + __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO) + +#define BUILDIO_IOPORT(bwl, type) \ + __BUILD_IOPORT_PFX(, bwl, type) \ + __BUILD_IOPORT_PFX(__mem_, bwl, type) + +BUILDIO_MEM(b, u8) +BUILDIO_MEM(w, u16) +BUILDIO_MEM(l, u32) + +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +#define __BUILD_MEMORY_STRING(bwl, type) \ +static inline void writes##bwl(volatile void __iomem *addr, \ + const void *data, unsigned int count) \ +{ \ + const type *__data = data; \ + \ + while (count--) \ + __mem_write##bwl(*__data++, addr); \ +} \ + \ +static inline void reads##bwl(const volatile void __iomem *addr, \ + void *data, unsigned int count) \ +{ \ + type *__data = data; \ + \ + while (count--) \ + *__data++ = __mem_read##bwl(addr); \ +} + +#define __BUILD_IOPORT_STRING(bwl, type) \ +static inline void outs##bwl(unsigned long port, const void *data, \ + unsigned int count) \ +{ \ + const type *__data = data; \ + \ + while (count--) \ + __mem_out##bwl(*__data++, port); \ +} \ + \ +static inline void ins##bwl(unsigned long port, void *data, \ + unsigned int count) \ +{ \ + type *__data = data; \ + \ + while (count--) \ + *__data++ = __mem_in##bwl(port); \ +} -#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l) -#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l) -#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l) +#define BUILDSTRING(bwl, type) \ + __BUILD_MEMORY_STRING(bwl, type) \ + __BUILD_IOPORT_STRING(bwl, type) +BUILDSTRING(b, u8) +BUILDSTRING(w, u16) +BUILDSTRING(l, u32) /* * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be */ #ifndef ioread8 -#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define ioread8(p) ((unsigned int)readb(p)) -#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; }) -#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; }) +#define ioread16(p) ((unsigned int)readw(p)) +#define ioread16be(p) ((unsigned int)__raw_readw(p)) -#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; }) -#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; }) +#define ioread32(p) ((unsigned int)readl(p)) +#define ioread32be(p) ((unsigned int)__raw_readl(p)) -#define iowrite8(v,p) __raw_writeb(v, p) +#define iowrite8(v,p) writeb(v, p) -#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p) -#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p) +#define iowrite16(v,p) writew(v, p) +#define iowrite16be(v,p) __raw_writew(v, p) -#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p) -#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p) +#define iowrite32(v,p) writel(v, p) +#define iowrite32be(v,p) __raw_writel(v, p) -#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) -#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) -#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) +#define ioread8_rep(p,d,c) readsb(p,d,c) +#define ioread16_rep(p,d,c) readsw(p,d,c) +#define ioread32_rep(p,d,c) readsl(p,d,c) -#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) -#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) -#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) +#define iowrite8_rep(p,s,c) writesb(p,s,c) +#define iowrite16_rep(p,s,c) writesw(p,s,c) +#define iowrite32_rep(p,s,c) writesl(p,s,c) #endif - -/* - * These two are only here because ALSA _thinks_ it needs them... - */ static inline void memcpy_fromio(void * to, const volatile void __iomem *from, unsigned long count) { char *p = to; - while (count) { - count--; - *p = readb(from); - p++; - from++; - } + volatile const char __iomem *addr = from; + + while (count--) + *p++ = readb(addr++); } static inline void memcpy_toio(volatile void __iomem *to, const void * from, unsigned long count) { const char *p = from; - while (count) { - count--; - writeb(*p, to); - p++; - to++; - } + volatile char __iomem *addr = to; + + while (count--) + writeb(*p++, addr++); } static inline void memset_io(volatile void __iomem *addr, unsigned char val, unsigned long count) { - memset((void __force *)addr, val, count); -} - -/* - * Bad read/write accesses... - */ -extern void __readwrite_bug(const char *fn); - -#define IO_SPACE_LIMIT 0xffffffff - -/* Convert I/O port address to virtual address */ -#define __io(p) ((void __iomem *)phys_to_uncached(p)) - -/* - * IO port access primitives - * ------------------------- - * - * The AVR32 doesn't have special IO access instructions; all IO is memory - * mapped. Note that these are defined to perform little endian accesses - * only. Their primary purpose is to access PCI and ISA peripherals. - * - * Note that for a big endian machine, this implies that the following - * big endian mode connectivity is in place. - * - * The machine specific io.h include defines __io to translate an "IO" - * address to a memory address. - * - * Note that we prevent GCC re-ordering or caching values in expressions - * by introducing sequence points into the in*() definitions. Note that - * __raw_* do not guarantee this behaviour. - * - * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. - */ -#define outb(v, p) __raw_writeb(v, __io(p)) -#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p)) -#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p)) - -#define inb(p) __raw_readb(__io(p)) -#define inw(p) le16_to_cpu(__raw_readw(__io(p))) -#define inl(p) le32_to_cpu(__raw_readl(__io(p))) - -static inline void __outsb(unsigned long port, void *addr, unsigned int count) -{ - while (count--) { - outb(*(u8 *)addr, port); - addr++; - } -} + volatile char __iomem *p = addr; -static inline void __insb(unsigned long port, void *addr, unsigned int count) -{ - while (count--) { - *(u8 *)addr = inb(port); - addr++; - } + while (count--) + writeb(val, p++); } -static inline void __outsw(unsigned long port, void *addr, unsigned int count) -{ - while (count--) { - outw(*(u16 *)addr, port); - addr += 2; - } -} - -static inline void __insw(unsigned long port, void *addr, unsigned int count) -{ - while (count--) { - *(u16 *)addr = inw(port); - addr += 2; - } -} - -static inline void __outsl(unsigned long port, void *addr, unsigned int count) -{ - while (count--) { - outl(*(u32 *)addr, port); - addr += 4; - } -} - -static inline void __insl(unsigned long port, void *addr, unsigned int count) -{ - while (count--) { - *(u32 *)addr = inl(port); - addr += 4; - } -} - -#define outsb(port, addr, count) __outsb(port, addr, count) -#define insb(port, addr, count) __insb(port, addr, count) -#define outsw(port, addr, count) __outsw(port, addr, count) -#define insw(port, addr, count) __insw(port, addr, count) -#define outsl(port, addr, count) __outsl(port, addr, count) -#define insl(port, addr, count) __insl(port, addr, count) +#define IO_SPACE_LIMIT 0xffffffff extern void __iomem *__ioremap(unsigned long offset, size_t size, unsigned long flags); @@ -292,6 +325,4 @@ extern void __iounmap(void __iomem *addr); */ #define xlate_dev_kmem_ptr(p) p -#endif /* __KERNEL__ */ - #endif /* __ASM_AVR32_IO_H */