From: Michael Chan Date: Fri, 4 Nov 2005 16:51:21 +0000 (-0800) Subject: [PATCH] bnx2: update firmware handshake for 5708 X-Git-Tag: v2.6.15-rc1~453^2~4^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e3648b3d8de3b37fae7acbb57db1e001a19cd3b7;p=linux-2.6 [PATCH] bnx2: update firmware handshake for 5708 Dynamically determine the shared memory location where eeprom parameters are stored instead of using a fixed location. Add speed reporting to management firmware. This allows management firmware to know the current speed without contending for MII registers. Signed-off-by: Michael Chan Signed-off-by: John W. Linville --- diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 08086a9e54..affb67372e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -436,6 +436,62 @@ alloc_mem_err: return -ENOMEM; } +static void +bnx2_report_fw_link(struct bnx2 *bp) +{ + u32 fw_link_status = 0; + + if (bp->link_up) { + u32 bmsr; + + switch (bp->line_speed) { + case SPEED_10: + if (bp->duplex == DUPLEX_HALF) + fw_link_status = BNX2_LINK_STATUS_10HALF; + else + fw_link_status = BNX2_LINK_STATUS_10FULL; + break; + case SPEED_100: + if (bp->duplex == DUPLEX_HALF) + fw_link_status = BNX2_LINK_STATUS_100HALF; + else + fw_link_status = BNX2_LINK_STATUS_100FULL; + break; + case SPEED_1000: + if (bp->duplex == DUPLEX_HALF) + fw_link_status = BNX2_LINK_STATUS_1000HALF; + else + fw_link_status = BNX2_LINK_STATUS_1000FULL; + break; + case SPEED_2500: + if (bp->duplex == DUPLEX_HALF) + fw_link_status = BNX2_LINK_STATUS_2500HALF; + else + fw_link_status = BNX2_LINK_STATUS_2500FULL; + break; + } + + fw_link_status |= BNX2_LINK_STATUS_LINK_UP; + + if (bp->autoneg) { + fw_link_status |= BNX2_LINK_STATUS_AN_ENABLED; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if (!(bmsr & BMSR_ANEGCOMPLETE) || + bp->phy_flags & PHY_PARALLEL_DETECT_FLAG) + fw_link_status |= BNX2_LINK_STATUS_PARALLEL_DET; + else + fw_link_status |= BNX2_LINK_STATUS_AN_COMPLETE; + } + } + else + fw_link_status = BNX2_LINK_STATUS_LINK_DOWN; + + REG_WR_IND(bp, bp->shmem_base + BNX2_LINK_STATUS, fw_link_status); +} + static void bnx2_report_link(struct bnx2 *bp) { @@ -467,6 +523,8 @@ bnx2_report_link(struct bnx2 *bp) netif_carrier_off(bp->dev); printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); } + + bnx2_report_fw_link(bp); } static void @@ -1123,13 +1181,13 @@ bnx2_init_5708s_phy(struct bnx2 *bp) bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG); } - val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_CONFIG) & + val = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG) & BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK; if (val) { u32 is_backplane; - is_backplane = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + + is_backplane = REG_RD_IND(bp, bp->shmem_base + BNX2_SHARED_HW_CFG_CONFIG); if (is_backplane & BNX2_SHARED_HW_CFG_PHY_BACKPLANE) { bnx2_write_phy(bp, BCM5708S_BLK_ADDR, @@ -1280,13 +1338,13 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data) bp->fw_wr_seq++; msg_data |= bp->fw_wr_seq; - REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data); /* wait for an acknowledgement. */ for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) { udelay(5); - val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB); + val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB); if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ)) break; @@ -1299,7 +1357,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data) msg_data &= ~BNX2_DRV_MSG_CODE; msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT; - REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data); bp->fw_timed_out = 1; @@ -2935,7 +2993,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) /* Deposit a driver reset signature so the firmware knows that * this is a soft reset. */ - REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE, + REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE, BNX2_DRV_RESET_SIGNATURE_MAGIC); bp->fw_timed_out = 0; @@ -4012,7 +4070,7 @@ bnx2_timer(unsigned long data) goto bnx2_restart_timer; msg = (u32) ++bp->fw_drv_pulse_wr_seq; - REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg); + REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg); if ((bp->phy_flags & PHY_SERDES_FLAG) && (CHIP_NUM(bp) == CHIP_NUM_5706)) { @@ -5483,10 +5541,18 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bnx2_init_nvram(bp); + reg = REG_RD_IND(bp, BNX2_SHM_HDR_SIGNATURE); + + if ((reg & BNX2_SHM_HDR_SIGNATURE_SIG_MASK) == + BNX2_SHM_HDR_SIGNATURE_SIG) + bp->shmem_base = REG_RD_IND(bp, BNX2_SHM_HDR_ADDR_0); + else + bp->shmem_base = HOST_VIEW_SHMEM_BASE; + /* Get the permanent MAC address. First we need to make sure the * firmware is actually running. */ - reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE); + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_SIGNATURE); if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != BNX2_DEV_INFO_SIGNATURE_MAGIC) { @@ -5495,14 +5561,13 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) goto err_out_unmap; } - bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + - BNX2_DEV_INFO_BC_REV); + bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV); - reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER); + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER); bp->mac_addr[0] = (u8) (reg >> 8); bp->mac_addr[1] = (u8) reg; - reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER); + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_LOWER); bp->mac_addr[2] = (u8) (reg >> 24); bp->mac_addr[3] = (u8) (reg >> 16); bp->mac_addr[4] = (u8) (reg >> 8); @@ -5538,7 +5603,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->flags |= NO_WOL_FLAG; if (CHIP_NUM(bp) == CHIP_NUM_5708) { bp->phy_addr = 2; - reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_SHARED_HW_CFG_CONFIG); if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G) bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG; @@ -5562,8 +5627,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (bp->phy_flags & PHY_SERDES_FLAG) { bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; - reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + - BNX2_PORT_HW_CFG_CONFIG); + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG); reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { bp->autoneg = 0; diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 4a2e6ba7cd..012586e4ba 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -3715,6 +3715,15 @@ struct l2_fhdr { #define BNX2_MCP_ROM 0x00150000 #define BNX2_MCP_SCRATCH 0x00160000 +#define BNX2_SHM_HDR_SIGNATURE BNX2_MCP_SCRATCH +#define BNX2_SHM_HDR_SIGNATURE_SIG_MASK 0xffff0000 +#define BNX2_SHM_HDR_SIGNATURE_SIG 0x53530000 +#define BNX2_SHM_HDR_SIGNATURE_VER_MASK 0x000000ff +#define BNX2_SHM_HDR_SIGNATURE_VER_ONE 0x00000001 + +#define BNX2_SHM_HDR_ADDR_0 BNX2_MCP_SCRATCH + 4 +#define BNX2_SHM_HDR_ADDR_1 BNX2_MCP_SCRATCH + 8 + #define NUM_MC_HASH_REGISTERS 8 @@ -4052,6 +4061,8 @@ struct bnx2 { u8 mac_addr[8]; + u32 shmem_base; + u32 fw_ver; int pm_cap; @@ -4191,6 +4202,38 @@ struct fw_info { #define BNX2_FW_MSG_STATUS_FAILURE 0x00ff0000 #define BNX2_LINK_STATUS 0x0000000c +#define BNX2_LINK_STATUS_INIT_VALUE 0xffffffff +#define BNX2_LINK_STATUS_LINK_UP 0x1 +#define BNX2_LINK_STATUS_LINK_DOWN 0x0 +#define BNX2_LINK_STATUS_SPEED_MASK 0x1e +#define BNX2_LINK_STATUS_AN_INCOMPLETE (0<<1) +#define BNX2_LINK_STATUS_10HALF (1<<1) +#define BNX2_LINK_STATUS_10FULL (2<<1) +#define BNX2_LINK_STATUS_100HALF (3<<1) +#define BNX2_LINK_STATUS_100BASE_T4 (4<<1) +#define BNX2_LINK_STATUS_100FULL (5<<1) +#define BNX2_LINK_STATUS_1000HALF (6<<1) +#define BNX2_LINK_STATUS_1000FULL (7<<1) +#define BNX2_LINK_STATUS_2500HALF (8<<1) +#define BNX2_LINK_STATUS_2500FULL (9<<1) +#define BNX2_LINK_STATUS_AN_ENABLED (1<<5) +#define BNX2_LINK_STATUS_AN_COMPLETE (1<<6) +#define BNX2_LINK_STATUS_PARALLEL_DET (1<<7) +#define BNX2_LINK_STATUS_RESERVED (1<<8) +#define BNX2_LINK_STATUS_PARTNER_AD_1000FULL (1<<9) +#define BNX2_LINK_STATUS_PARTNER_AD_1000HALF (1<<10) +#define BNX2_LINK_STATUS_PARTNER_AD_100BT4 (1<<11) +#define BNX2_LINK_STATUS_PARTNER_AD_100FULL (1<<12) +#define BNX2_LINK_STATUS_PARTNER_AD_100HALF (1<<13) +#define BNX2_LINK_STATUS_PARTNER_AD_10FULL (1<<14) +#define BNX2_LINK_STATUS_PARTNER_AD_10HALF (1<<15) +#define BNX2_LINK_STATUS_TX_FC_ENABLED (1<<16) +#define BNX2_LINK_STATUS_RX_FC_ENABLED (1<<17) +#define BNX2_LINK_STATUS_PARTNER_SYM_PAUSE_CAP (1<<18) +#define BNX2_LINK_STATUS_PARTNER_ASYM_PAUSE_CAP (1<<19) +#define BNX2_LINK_STATUS_SERDES_LINK (1<<20) +#define BNX2_LINK_STATUS_PARTNER_AD_2500FULL (1<<21) +#define BNX2_LINK_STATUS_PARTNER_AD_2500HALF (1<<22) #define BNX2_DRV_PULSE_MB 0x00000010 #define BNX2_DRV_PULSE_SEQ_MASK 0x00007fff