From: Manuel Lauss Date: Fri, 27 Jun 2008 16:25:18 +0000 (+0200) Subject: au1xmmc: remove custom carddetect poll implementation. X-Git-Tag: v2.6.27-rc1~1047^2~35 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e2d2647702702ea08cb78cdc9eca8c24242aa9be;p=linux-2.6 au1xmmc: remove custom carddetect poll implementation. The MMC core provides a carddetect poll feature, time to remove the driver's own implementation of it. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 718eb87958..3f15eb2048 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -21,7 +21,7 @@ * published by the Free Software Foundation. */ -/* Why is a timer used to detect insert events? +/* Why don't we use the SD controllers' carddetect feature? * * From the AU1100 MMC application guide: * If the Au1100-based design is intended to support both MultiMediaCards @@ -30,8 +30,6 @@ * In doing so, a MMC card never enters SPI-mode communications, * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective * (the low to high transition will not occur). - * - * So we use the timer to check the status manually. */ #include @@ -111,7 +109,6 @@ struct au1xmmc_host { int irq; - struct timer_list timer; struct tasklet_struct finish_task; struct tasklet_struct data_task; struct au1xmmc_platform_data *platdata; @@ -198,29 +195,24 @@ static void au1xmmc_set_power(struct au1xmmc_host *host, int state) host->platdata->set_power(host->mmc, state); } -static int au1xmmc_card_inserted(struct au1xmmc_host *host) +static int au1xmmc_card_inserted(struct mmc_host *mmc) { - int ret; + struct au1xmmc_host *host = mmc_priv(mmc); if (host->platdata && host->platdata->card_inserted) - ret = host->platdata->card_inserted(host->mmc); - else - ret = 1; /* assume there is a card */ + return !!host->platdata->card_inserted(host->mmc); - return ret; + return -ENOSYS; } static int au1xmmc_card_readonly(struct mmc_host *mmc) { struct au1xmmc_host *host = mmc_priv(mmc); - int ret; if (host->platdata && host->platdata->card_readonly) - ret = host->platdata->card_readonly(mmc); - else - ret = 0; /* assume card is read-write */ + return !!host->platdata->card_readonly(mmc); - return ret; + return -ENOSYS; } static void au1xmmc_finish_request(struct au1xmmc_host *host) @@ -698,7 +690,7 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) host->status = HOST_S_CMD; /* fail request immediately if no card is present */ - if (0 == au1xmmc_card_inserted(host)) { + if (0 == au1xmmc_card_inserted(mmc)) { mrq->cmd->error = -ENOMEDIUM; au1xmmc_finish_request(host); return; @@ -935,39 +927,10 @@ static const struct mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, .set_ios = au1xmmc_set_ios, .get_ro = au1xmmc_card_readonly, + .get_cd = au1xmmc_card_inserted, .enable_sdio_irq = au1xmmc_enable_sdio_irq, }; -static void au1xmmc_poll_event(unsigned long arg) -{ - struct au1xmmc_host *host = (struct au1xmmc_host *)arg; - int card = au1xmmc_card_inserted(host); - int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0; - - if (card != controller) { - host->flags &= ~HOST_F_ACTIVE; - if (card) - host->flags |= HOST_F_ACTIVE; - mmc_detect_change(host->mmc, 0); - } - -#ifdef DEBUG - if (host->mrq != NULL) { - u32 status = au_readl(HOST_STATUS(host)); - DBG("PENDING - %8.8x\n", host->pdev->id, status); - } -#endif - mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT); -} - -static void au1xmmc_init_cd_poll_timer(struct au1xmmc_host *host) -{ - init_timer(&host->timer); - host->timer.function = au1xmmc_poll_event; - host->timer.data = (unsigned long)host; - host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT; -} - static int __devinit au1xmmc_probe(struct platform_device *pdev) { struct mmc_host *mmc; @@ -1042,13 +1005,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) if (host->platdata && host->platdata->cd_setup) { ret = host->platdata->cd_setup(mmc, 1); if (ret) { - dev_err(&pdev->dev, "board CD setup failed\n"); - goto out4; + dev_warn(&pdev->dev, "board CD setup failed\n"); + mmc->caps |= MMC_CAP_NEEDS_POLL; } - } else { - /* poll the board-specific is-card-in-socket-? method */ - au1xmmc_init_cd_poll_timer(host); - } + } else + mmc->caps |= MMC_CAP_NEEDS_POLL; tasklet_init(&host->data_task, au1xmmc_tasklet_data, (unsigned long)host); @@ -1084,10 +1045,6 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); - /* start the carddetect poll timer if necessary */ - if (!(host->platdata && host->platdata->cd_setup)) - add_timer(&host->timer); - printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X" " (mode=%s)\n", pdev->id, host->iobase, host->flags & HOST_F_DMA ? "dma" : "pio"); @@ -1112,9 +1069,10 @@ out5: tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); - if (host->platdata && host->platdata->cd_setup) + if (host->platdata && host->platdata->cd_setup && + !(mmc->caps & MMC_CAP_NEEDS_POLL)) host->platdata->cd_setup(mmc, 0); -out4: + free_irq(host->irq, host); out3: iounmap((void *)host->iobase); @@ -1142,10 +1100,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev) led_classdev_unregister(host->platdata->led); #endif - if (host->platdata && host->platdata->cd_setup) + if (host->platdata && host->platdata->cd_setup && + !(mmc->caps & MMC_CAP_NEEDS_POLL)) host->platdata->cd_setup(mmc, 0); - else - del_timer_sync(&host->timer); au_writel(0, HOST_ENABLE(host)); au_writel(0, HOST_CONFIG(host));