From: Olof Johansson Date: Mon, 16 Apr 2007 06:26:34 +0000 (+1000) Subject: [POWERPC] pasemi: Allow 8KB config space for I/O bridge X-Git-Tag: v2.6.22-rc1~1109^2~65 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=df7e70a2b0899845bb9a53548beeed05b9947705;p=linux-2.6 [POWERPC] pasemi: Allow 8KB config space for I/O bridge Device 0 function 0 on the root bus is really a two-function bus agent, but only the first function is visible. Because of this, we need to allow config accesses into the second range. Modify the check for valid offsets accordingly. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index 7ecb2ba24d..056243da36 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -33,7 +33,17 @@ #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off)) -#define CONFIG_OFFSET_VALID(off) ((off) < 4096) +static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset) +{ + /* Device 0 Function 0 is special: It's config space spans function 1 as + * well, so allow larger offset. It's really a two-function device but the + * second function does not probe. + */ + if (bus == 0 && devfn == 0) + return offset < 8192; + else + return offset < 4096; +} static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose, u8 bus, u8 devfn, int offset) @@ -51,7 +61,7 @@ static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, if (!hose) return PCIBIOS_DEVICE_NOT_FOUND; - if (!CONFIG_OFFSET_VALID(offset)) + if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); @@ -85,7 +95,7 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, if (!hose) return PCIBIOS_DEVICE_NOT_FOUND; - if (!CONFIG_OFFSET_VALID(offset)) + if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);