From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 18 Oct 2006 04:38:26 +0000 (-0500)
Subject: [PATCH] bcm43xx: fix unexpected LED control values in BCM4303 sprom
X-Git-Tag: v2.6.19-rc5~10^2^2
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=df6d7c94b0c3ae6a1185c9e5fa8ee3368e4a5efb;p=linux-2.6

[PATCH] bcm43xx: fix unexpected LED control values in BCM4303 sprom

The bcm43xx driver uses 4 locations in the devices sprom to determine
the behavior of the leds. Certain defaults are assigned if all bits are
set in those locations. On at least one BCM4303 chip, the sprom contains
values other than the default, which executes an assertion placed in the
default case of a following switch statement. This patch makes the leds
on the above mentioned interface behave correctly. In addition, it limits
the number of logged messages to 20 for the case of unexpected values in
the sprom locations.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
index 2ddbec6bf1..7d383a27b9 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
@@ -189,20 +189,24 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity)
 		case BCM43xx_LED_INACTIVE:
 			continue;
 		case BCM43xx_LED_OFF:
+		case BCM43xx_LED_BCM4303_3:
 			break;
 		case BCM43xx_LED_ON:
 			turn_on = 1;
 			break;
 		case BCM43xx_LED_ACTIVITY:
+		case BCM43xx_LED_BCM4303_0:
 			turn_on = activity;
 			break;
 		case BCM43xx_LED_RADIO_ALL:
 			turn_on = radio->enabled;
 			break;
 		case BCM43xx_LED_RADIO_A:
+		case BCM43xx_LED_BCM4303_2:
 			turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
 			break;
 		case BCM43xx_LED_RADIO_B:
+		case BCM43xx_LED_BCM4303_1:
 			turn_on = (radio->enabled &&
 				   (phy->type == BCM43xx_PHYTYPE_B ||
 				    phy->type == BCM43xx_PHYTYPE_G));
@@ -257,7 +261,8 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity)
 			continue;
 #endif /* CONFIG_BCM43XX_DEBUG */
 		default:
-			assert(0);
+			dprintkl(KERN_INFO PFX "Bad value in leds_update,"
+				" led->behaviour: 0x%x\n", led->behaviour);
 		};
 
 		if (led->activelow)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
index d3716cf3ae..811e14a811 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
@@ -46,6 +46,12 @@ enum { /* LED behaviour values */
 	BCM43xx_LED_TEST_BLINKSLOW,
 	BCM43xx_LED_TEST_BLINKMEDIUM,
 	BCM43xx_LED_TEST_BLINKFAST,
+
+	/* Misc values for BCM4303 */
+	BCM43xx_LED_BCM4303_0 = 0x2B,
+	BCM43xx_LED_BCM4303_1 = 0x78,
+	BCM43xx_LED_BCM4303_2 = 0x2E,
+	BCM43xx_LED_BCM4303_3 = 0x19,
 };
 
 int bcm43xx_leds_init(struct bcm43xx_private *bcm);