From: Mike Frysinger <michael.frysinger@analog.com>
Date: Tue, 5 Aug 2008 20:01:15 +0000 (-0700)
Subject: blackfin RTC driver: if we dont define irq_set_freq, the common rtc-dev layer will... 
X-Git-Tag: v2.6.27-rc2~27
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=dd279f6127c0f64dfb0055bc0adb97a284a08df3;p=linux-2.6

blackfin RTC driver: if we dont define irq_set_freq, the common rtc-dev layer will give us the same behavior of returning ENOTTY

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 8624f55d05..48ada59947 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -381,20 +381,6 @@ static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
 #undef yesno
 }
 
-/**
- *	bfin_irq_set_freq - make sure hardware supports requested freq
- *	@dev: pointer to RTC device structure
- *	@freq: requested frequency rate
- *
- *	The Blackfin RTC can only generate periodic events at 1 per
- *	second (1 Hz), so reject any attempt at changing it.
- */
-static int bfin_irq_set_freq(struct device *dev, int freq)
-{
-	dev_dbg_stamp(dev);
-	return -ENOTTY;
-}
-
 static struct rtc_class_ops bfin_rtc_ops = {
 	.open          = bfin_rtc_open,
 	.release       = bfin_rtc_release,
@@ -404,7 +390,6 @@ static struct rtc_class_ops bfin_rtc_ops = {
 	.read_alarm    = bfin_rtc_read_alarm,
 	.set_alarm     = bfin_rtc_set_alarm,
 	.proc          = bfin_rtc_proc,
-	.irq_set_freq  = bfin_irq_set_freq,
 };
 
 static int __devinit bfin_rtc_probe(struct platform_device *pdev)