From: Joe Perches Date: Mon, 17 Dec 2007 19:40:18 +0000 (-0800) Subject: USB: Spelling fixes X-Git-Tag: v2.6.25-rc1~1075^2~59 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=dc0d5c1e5c7532e800fff6e313cd4af44af99976;p=linux-2.6 USB: Spelling fixes Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index fad5d91656..c5ec1a55ee 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -999,7 +999,7 @@ static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot) bi.dwAddress = swab32(blockidx->PageAddress); uea_dbg(INS_TO_USBDEV(sc), - "sending block %u for DSP page %u size %u adress %x\n", + "sending block %u for DSP page %u size %u address %x\n", blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress)); /* send block info through the IDMA pipe */ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b0f9873ce6..bcc42136c9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -915,7 +915,7 @@ next_desc: } if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n"); skip_normal_probe: diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index aecc7225a8..f3095a90a0 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -53,7 +53,7 @@ #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ #define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ -#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ +#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */ #define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index d59eb92a84..63e8fa3a69 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1896,7 +1896,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, spin_lock_irqsave(&udc->lock, flags); - /* ------basic driver infomation ---- */ + /* ------basic driver information ---- */ t = scnprintf(next, size, DRIVER_DESC "\n" "%s version: %s\n" diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 7d6bef56cb..e6d68bda42 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1028,7 +1028,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* STATUS for zero length DATA stages is * always an IN ... even for IN transfers, - * a wierd case which seem to stall OMAP. + * a weird case which seem to stall OMAP. */ UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR); UDC_CTRL_REG = UDC_CLR_EP; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index f35795fbd8..adb0defa16 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -25,7 +25,7 @@ #include "ehci-fsl.h" -/* FIXME: Power Managment is un-ported so temporarily disable it */ +/* FIXME: Power Management is un-ported so temporarily disable it */ #undef CONFIG_PM /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 80d99bce2b..dce305bd62 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -211,7 +211,7 @@ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) * low/fullspeed transfer can "carry over" from one uframe to the next, * since the TT just performs downstream transfers in sequence. * - * For example two seperate 100 usec transfers can start in the same uframe, + * For example two separate 100 usec transfers can start in the same uframe, * and the second one would "carry over" 75 usecs into the next uframe. */ static void diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h index fe9ceb077d..57388252b6 100644 --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -405,7 +405,7 @@ struct r8a66597_pipe_info { u16 pipenum; - u16 address; /* R8A66597 HCD usb addres */ + u16 address; /* R8A66597 HCD usb address */ u16 epnum; u16 maxpacket; u16 type; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 8832a72bb1..cb7fa0eaf3 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -323,7 +323,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, usb_kill_urb(urb); retval = -ETIMEDOUT; } else { - /* URB completed within timout */ + /* URB completed within timeout */ retval = urb->status; readbytes = urb->actual_length; } diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index f1b886c204..da922dfc0d 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1312,7 +1312,7 @@ static int ctrl_out (struct usbtest_dev *dev, len += vary; /* [real world] the "zero bytes IN" case isn't really used. - * hardware can easily trip up in this wierd case, since its + * hardware can easily trip up in this weird case, since its * status stage is IN, not OUT like other ep0in transfers. */ if (len > length) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index a5d2e115e1..3428ccc28d 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -959,7 +959,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) * * This function will block the close until one of the following: * 1. Response to our Chase comes from Edgeport - * 2. A timout of 10 seconds without activity has expired + * 2. A timeout of 10 seconds without activity has expired * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) * ************************************************************************/ @@ -999,7 +999,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) return; } } else { - // Reset timout value back to 10 seconds + // Reset timeout value back to 10 seconds dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits); loop = 10; } @@ -1014,7 +1014,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) * This function will block the close until one of the following: * 1. TX count are 0 * 2. The edgeport has stopped - * 3. A timout of 3 seconds without activity has expired + * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ static void block_until_tx_empty (struct edgeport_port *edge_port) @@ -1050,7 +1050,7 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) return; } } else { - // Reset timout value back to seconds + // Reset timeout value back to seconds loop = 30; } } diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c29c912711..869ecd374c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1133,7 +1133,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) * This function will block the close until one of the following: * 1. TX count are 0 * 2. The mos7840 has stopped - * 3. A timout of 3 seconds without activity has expired + * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) @@ -1161,7 +1161,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) dbg("%s - TIMEOUT", __FUNCTION__); return; } else { - /* Reset timout value back to seconds */ + /* Reset timeout value back to seconds */ wait = 30; } } @@ -1275,7 +1275,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) * * This function will block the close until one of the following: * 1. Response to our Chase comes from mos7840 - * 2. A timout of 10 seconds without activity has expired + * 2. A timeout of 10 seconds without activity has expired * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty) * ************************************************************************/ @@ -1304,7 +1304,7 @@ static void mos7840_block_until_chase_response(struct moschip_port dbg("%s - TIMEOUT", __FUNCTION__); return; } else { - /* Reset timout value back to seconds */ + /* Reset timeout value back to seconds */ wait = 10; } }