From: Manfred Gruber Date: Sun, 17 Dec 2006 21:10:48 +0000 (+0100) Subject: [ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. X-Git-Tag: v2.6.21-rc1~75^2~22 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d941caa2537a01653704a8c1148d330a3b2755f1;p=linux-2.6 [ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index af7904b3d0..575a21dabd 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -51,6 +51,31 @@ config MACH_GESBC9312 Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. +config MACH_MICRO9 + bool + default n + +config MACH_MICRO9H + bool "Support Contec Hypercontrol Micro9-H" + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-H board. + +config MACH_MICRO9M + bool "Support Contec Hypercontrol Micro9-M" + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-M board. + +config MACH_MICRO9L + bool "Support Contec Hypercontrol Micro9-L" + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-L board. + config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" help diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index b06641dd45..0d3bf93265 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -13,4 +13,5 @@ obj-$(CONFIG_MACH_EDB9312) += edb9312.o obj-$(CONFIG_MACH_EDB9315) += edb9315.o obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o +obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c new file mode 100644 index 0000000000..f28c1294ca --- /dev/null +++ b/arch/arm/mach-ep93xx/micro9.c @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mach-ep93xx/micro9.c + * + * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH + * Manfred Gruber + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include +#include + +static struct ep93xx_eth_data micro9_eth_data = { + .phy_id = 0x1f, +}; + +static struct resource micro9_eth_resource[] = { + { + .start = EP93XX_ETHERNET_PHYS_BASE, + .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_ETHERNET, + .end = IRQ_EP93XX_ETHERNET, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device micro9_eth_device = { + .name = "ep93xx-eth", + .id = -1, + .dev = { + .platform_data = µ9_eth_data, + }, + .num_resources = ARRAY_SIZE(micro9_eth_resource), + .resource = micro9_eth_resource, +}; + +static void __init micro9_eth_init(void) +{ + memcpy(micro9_eth_data.dev_addr, + (void *)(EP93XX_ETHERNET_BASE + 0x50), 6); + platform_device_register(µ9_eth_device); +} + +static void __init micro9_init(void) +{ + micro9_eth_init(); +} + +/* + * Micro9-H + */ +#ifdef CONFIG_MACH_MICRO9H +static struct physmap_flash_data micro9h_flash_data = { + .width = 4, +}; + +static struct resource micro9h_flash_resource = { + .start = 0x10000000, + .end = 0x13ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device micro9h_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = µ9h_flash_data, + }, + .num_resources = 1, + .resource = µ9h_flash_resource, +}; + +static void __init micro9h_init(void) +{ + platform_device_register(µ9h_flash); +} + +static void __init micro9h_init_machine(void) +{ + ep93xx_init_devices(); + micro9_init(); + micro9h_init(); +} + +MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") + /* Maintainer: Manfred Gruber */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9h_init_machine, +MACHINE_END +#endif + +/* + * Micro9-M + */ +#ifdef CONFIG_MACH_MICRO9M +static void __init micro9m_init_machine(void) +{ + ep93xx_init_devices(); + micro9_init(); +} + +MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M") + /* Maintainer: Manfred Gruber */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9m_init_machine, +MACHINE_END +#endif + +/* + * Micro9-L + */ +#ifdef CONFIG_MACH_MICRO9L +static void __init micro9l_init_machine(void) +{ + ep93xx_init_devices(); + micro9_init(); +} + +MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") + /* Maintainer: Manfred Gruber */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9l_init_machine, +MACHINE_END +#endif +