From: John W. Linville Date: Wed, 9 Nov 2005 23:19:14 +0000 (+0100) Subject: [PATCH] siimage: enable interrupts on Adaptec SA-1210 card X-Git-Tag: v2.6.15-rc1~52^2~1 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d868dd19ad0828b1b3b56f3b06bd4a39971847be;p=linux-2.6 [PATCH] siimage: enable interrupts on Adaptec SA-1210 card The siimage driver proports to support the Adaptec SA-1210 SATA controller. However, at least some of those cards boot-up with their interrupts disabled internally. The siimage driver currently ignores that fact, so that driver does not actually work with those cards. This patch enables those interrupts on cards that need it. [ This is implemented based on similar code in the libata-based sata_sil driver. ] Signed-off-by: John W. Linville Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 2b9961b881..022d244f2e 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -701,6 +701,7 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) unsigned long barsize = pci_resource_len(dev, 5); u8 tmpbyte = 0; void __iomem *ioaddr; + u32 tmp, irq_mask; /* * Drop back to PIO if we can't map the mmio. Some @@ -726,6 +727,14 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) pci_set_drvdata(dev, (void *) ioaddr); if (pdev_is_sata(dev)) { + /* make sure IDE0/1 interrupts are not masked */ + irq_mask = (1 << 22) | (1 << 23); + tmp = readl(ioaddr + 0x48); + if (tmp & irq_mask) { + tmp &= ~irq_mask; + writel(tmp, ioaddr + 0x48); + readl(ioaddr + 0x48); /* flush */ + } writel(0, ioaddr + 0x148); writel(0, ioaddr + 0x1C8); }