From: Nathan Lynch Date: Thu, 21 Sep 2006 19:25:34 +0000 (-0500) Subject: [POWERPC] Maple U3 HT - reject inappropriate config space access X-Git-Tag: v2.6.19-rc1~1300^2~4 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d608df5c7da6ee968aa2ad43c596d5f8d4022299;p=linux-2.6 [POWERPC] Maple U3 HT - reject inappropriate config space access When there is a PCI-X mode 2 capable device behind the HT<->PCI-X bridge, the pci core decides that the device has the extended 4K config space, even though the bus is not operating in mode 2. This is because the u3_ht pci ops silently accept offsets greater than 255 but use only the 8 least significant bits, which means reading at offset 0x100 gets the data at offset 0x0, and causes confusion for lspci. Reject accesses to configuration space offsets greater than 255. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index dc05af5156..ec5c14f5ba 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -213,6 +213,9 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; + if (offset > 0xff) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -245,6 +248,9 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; + if (offset > 0xff) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND;