From: Hin-Tak Leung <hintak.leung@gmail.com>
Date: Tue, 8 Jul 2008 11:30:02 +0000 (+0100)
Subject: rtl8187: updating rtl818x.h to support RTL8187B
X-Git-Tag: v2.6.27-rc1~969^2~186^2~6
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d1e11af51657d18222bef9cc15591f8c0f289186;p=linux-2.6

rtl8187: updating rtl818x.h to support RTL8187B

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h
index 4f7d38f506..85a6394e43 100644
--- a/drivers/net/wireless/rtl818x.h
+++ b/drivers/net/wireless/rtl818x.h
@@ -66,7 +66,10 @@ struct rtl818x_csr {
 #define RTL818X_TX_CONF_R8180_F		(3 << 25)
 #define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
 #define RTL818X_TX_CONF_R8185_D		(5 << 25)
+#define RTL818X_TX_CONF_R8187vD_1	(5 << 25)
+#define RTL818X_TX_CONF_R8187vD_2	(6 << 25)
 #define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
+#define RTL818X_TX_CONF_DISREQQSIZE	(1 << 28)
 #define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
 #define RTL818X_TX_CONF_HW_SEQNUM	(1 << 30)
 #define RTL818X_TX_CONF_CW_MIN		(1 << 31)
@@ -106,8 +109,11 @@ struct rtl818x_csr {
 #define RTL818X_MSR_NO_LINK		(0 << 2)
 #define RTL818X_MSR_ADHOC		(1 << 2)
 #define RTL818X_MSR_INFRA		(2 << 2)
+#define RTL818X_MSR_MASTER		(3 << 2)
+#define RTL818X_MSR_ENEDCA		(4 << 2)
 	u8	CONFIG3;
 #define RTL818X_CONFIG3_ANAPARAM_WRITE	(1 << 6)
+#define RTL818X_CONFIG3_GNT_SELECT	(1 << 7)
 	u8	CONFIG4;
 #define RTL818X_CONFIG4_POWEROFF	(1 << 6)
 #define RTL818X_CONFIG4_VCOOFF		(1 << 7)
@@ -133,7 +139,9 @@ struct rtl818x_csr {
 	__le32	RF_TIMING;
 	u8	GP_ENABLE;
 	u8	GPIO;
-	u8	reserved_12[10];
+	u8	reserved_12[2];
+	__le32	HSSI_PARA;
+	u8	reserved_13[4];
 	u8	TX_AGC_CTL;
 #define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT		(1 << 0)
 #define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT	(1 << 1)
@@ -141,29 +149,39 @@ struct rtl818x_csr {
 	u8	TX_GAIN_CCK;
 	u8	TX_GAIN_OFDM;
 	u8	TX_ANTENNA;
-	u8	reserved_13[16];
+	u8	reserved_14[16];
 	u8	WPA_CONF;
-	u8	reserved_14[3];
+	u8	reserved_15[3];
 	u8	SIFS;
 	u8	DIFS;
 	u8	SLOT;
-	u8	reserved_15[5];
+	u8	reserved_16[5];
 	u8	CW_CONF;
 #define RTL818X_CW_CONF_PERPACKET_CW_SHIFT	(1 << 0)
 #define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT	(1 << 1)
 	u8	CW_VAL;
 	u8	RATE_FALLBACK;
-	u8	reserved_16[25];
+#define RTL818X_RATE_FALLBACK_ENABLE	(1 << 7)
+	u8	ACM_CONTROL;
+	u8	reserved_17[24];
 	u8	CONFIG5;
 	u8	TX_DMA_POLLING;
-	u8	reserved_17[2];
+	u8	reserved_18[2];
 	__le16	CWR;
 	u8	RETRY_CTR;
-	u8	reserved_18[5];
+	u8	reserved_19[3];
+	__le16	INT_MIG;
+/* RTL818X_R8187B_*: magic numbers from ioregisters */
+#define RTL818X_R8187B_B	0
+#define RTL818X_R8187B_D	1
+#define RTL818X_R8187B_E	2
 	__le32	RDSAR;
-	u8	reserved_19[12];
-	__le16	FEMR;
+	__le16	TID_AC_MAP;
 	u8	reserved_20[4];
+	u8	ANAPARAM3;
+	u8	reserved_21[5];
+	__le16	FEMR;
+	u8	reserved_22[4];
 	__le16	TALLY_CNT;
 	u8	TALLY_SEL;
 } __attribute__((packed));