From: Alex Aizman Date: Fri, 5 Aug 2005 02:33:15 +0000 (-0700) Subject: [SCSI] open-iscsi/linux-iscsi-5 Initiator: Kconfig update X-Git-Tag: v2.6.15-rc1~723^2~2^2~50^2~17^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c899e4ef96f01b7e051045e08f3a8fe5e5f2bbb7;p=linux-2.6 [SCSI] open-iscsi/linux-iscsi-5 Initiator: Kconfig update Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f1e8c4223e..ff105c7b96 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -223,12 +223,35 @@ config SCSI_FC_ATTRS config SCSI_ISCSI_ATTRS tristate "iSCSI Transport Attributes" - depends on SCSI + depends on SCSI && NET help If you wish to export transport-specific information about each attached iSCSI device to sysfs, say Y. Otherwise, say N. +config ISCSI_TCP + tristate "iSCSI Initiator over TCP/IP" + depends on SCSI && INET && SCSI_ISCSI_ATTRS + select CRYPTO + select CRYPTO_MD5 + select CRYPTO_CRC32C + help + The iSCSI Driver provides a host with the ability to access storage + through an IP network. The driver uses the iSCSI protocol to transport + SCSI requests and responses over a TCP/IP network between the host + (the "initiator") and "targets". Architecturally, the iSCSI driver + combines with the host's TCP/IP stack, network drivers, and Network + Interface Card (NIC) to provide the same functions as a SCSI or a + Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). + + To compile this driver as a module, choose M here: the + module will be called iscsi_tcp. + + The userspace component needed to initialize the driver, documentation, + and sample configuration files can be found here: + + http://linux-iscsi.sf.net + endmenu menu "SCSI low-level drivers"