From: Jean Delvare Date: Thu, 12 Jul 2007 12:12:31 +0000 (+0200) Subject: i2c-savage4: Delete many unused defines X-Git-Tag: v2.6.23-rc1~1112^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c6e16295b71ec006c8cb6d13520e9194652a6026;p=linux-2.6 i2c-savage4: Delete many unused defines Signed-off-by: Jean Delvare --- diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index b7fb65c301..8adf4abaa0 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -25,8 +25,6 @@ /* This interfaces to the I2C bus of the Savage4 to gain access to the BT869 and possibly other I2C devices. The DDC bus is not yet supported because its register is not memory-mapped. - However we leave the DDC code here, commented out, to make - it easier to add later. */ #include @@ -37,36 +35,19 @@ #include #include -/* 3DFX defines */ -#define PCI_CHIP_SAVAGE3D 0x8A20 -#define PCI_CHIP_SAVAGE3D_MV 0x8A21 +/* device IDs */ #define PCI_CHIP_SAVAGE4 0x8A22 #define PCI_CHIP_SAVAGE2000 0x9102 -#define PCI_CHIP_PROSAVAGE_PM 0x8A25 -#define PCI_CHIP_PROSAVAGE_KM 0x8A26 -#define PCI_CHIP_SAVAGE_MX_MV 0x8c10 -#define PCI_CHIP_SAVAGE_MX 0x8c11 -#define PCI_CHIP_SAVAGE_IX_MV 0x8c12 -#define PCI_CHIP_SAVAGE_IX 0x8c13 #define REG 0xff20 /* Serial Port 1 Register */ /* bit locations in the register */ -#define DDC_ENAB 0x00040000 -#define DDC_SCL_OUT 0x00080000 -#define DDC_SDA_OUT 0x00100000 -#define DDC_SCL_IN 0x00200000 -#define DDC_SDA_IN 0x00400000 #define I2C_ENAB 0x00000020 #define I2C_SCL_OUT 0x00000001 #define I2C_SDA_OUT 0x00000002 #define I2C_SCL_IN 0x00000008 #define I2C_SDA_IN 0x00000010 -/* initialization states */ -#define INIT2 0x20 -#define INIT3 0x04 - /* delays */ #define CYCLE_DELAY 10 #define TIMEOUT (HZ / 2)