From: Andy Walls Date: Wed, 25 Jun 2008 03:24:21 +0000 (-0300) Subject: V4L/DVB (8114): cx18: Improve Raptor card audio input routing defintions X-Git-Tag: v2.6.27-rc1~966^2~195 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c5588b5c473c3d496a2f94b80ea8254110866506;p=linux-2.6 V4L/DVB (8114): cx18: Improve Raptor card audio input routing defintions cx18: Improved Raptor card audio input routing defintions, so that muxer values matched cx18_gpio() values for tuner, line in 1, and radio and added LED indication of selected audio input. Audio line in 2 doesn't work as it uses the not yet supported 2nd I2S port. Tuner/FM Radio AF is mono until SIF support is fixed. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 456fc924cf..0b892aacab 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -261,14 +261,14 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, }, .audio_inputs = { - { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 1 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 1 }, }, .tuners = { { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 2 }, .ddr = { /* MT 46V16M16 memory */ .chip_config = 0x50306, @@ -278,9 +278,12 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { .tune_lane = 0, .initial_emrs = 0, }, - .gpio_init.initial_value = 0x02, - .gpio_init.direction = 0x02, - .gpio_audio_input = { .mask = 0x02, .tuner = 0x02, .linein = 0x00 }, + .gpio_init.initial_value = 0x1002, + .gpio_init.direction = 0xf002, + .gpio_audio_input = { .mask = 0xf002, + .tuner = 0x1002, /* LED D1 Tuner AF */ + .linein = 0x2000, /* LED D2 Line In 1 */ + .radio = 0x4002 }, /* LED D3 Tuner AF */ .pci_list = cx18_pci_cnxt_raptor_pal, .i2c = &cx18_i2c_std, };