From: Zang Roy-r61911 Date: Wed, 23 Aug 2006 02:19:50 +0000 (+0800) Subject: [POWERPC] Update mpc7448hpc2 board irq support using device tree X-Git-Tag: v2.6.18-rc5~63^2~4 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c4342ff92bed26f2e0e3543a9f0fdc5f3a29b8fd;p=linux-2.6 [POWERPC] Update mpc7448hpc2 board irq support using device tree The patch rewrites mpc7448hpc2 board irq support according to the new mpic device tree interface. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca2..ed00ed2455 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 26a0cc820c..f3038461d4 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void) goto err; r[1].name = "tx"; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = irq_of_parse_and_map(np, 0); + r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i, &r[0], - np->n_intrs + 1); + 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); @@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void) tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; - tsi_eth_data.irq_num = np->intrs[0].line; + tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 3265d54c82..2ab06ed3ae 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -26,7 +26,6 @@ #include #include - #include #include #include @@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); @@ -278,7 +277,7 @@ static void init_pci_source(void) mb(); } -static inline int get_pci_source(void) +static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; @@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq) * Interrupt controller descriptor for cascaded PCI interrupt controller. */ -struct hw_interrupt_type tsi108_pci_irq = { +static struct irq_chip tsi108_pci_irq = { .typename = "tsi108_PCI_int", - .enable = tsi108_pci_irq_enable, - .disable = tsi108_pci_irq_disable, + .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, + .unmask = tsi108_pci_irq_enable, }; /* @@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void) DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; } init_pci_source(); } -int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return get_pci_source(); + unsigned int cascade_irq = get_pci_source(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h index c4c278d72f..2c702d35a7 100644 --- a/include/asm-powerpc/tsi108.h +++ b/include/asm-powerpc/tsi108.h @@ -1,16 +1,18 @@ /* - * include/asm-ppc/tsi108.h - * * common routine and memory layout for Tundra TSI108(Grendel) host bridge * memory controller. * * Author: Jacob Pan (jacob.pan@freescale.com) * Alex Bounine (alexandreb@tundra.com) - * 2004 (c) Freescale Semiconductor Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ + #ifndef __PPC_KERNEL_TSI108_H #define __PPC_KERNEL_TSI108_H diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h new file mode 100644 index 0000000000..3e4d04effa --- /dev/null +++ b/include/asm-powerpc/tsi108_irq.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Alex Bounine,