From: Uwe Zeisberger Date: Fri, 24 Mar 2006 17:23:14 +0000 (+0100) Subject: fix typos "wich" -> "which" X-Git-Tag: v2.6.17-rc1~736^2~16 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c30fe7f73194650148b58ee80908c1bc38246397;p=linux-2.6 fix typos "wich" -> "which" Signed-off-by: Uwe Zeisberger Signed-off-by: Adrian Bunk --- diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 944cf109a6..99902ae680 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -121,7 +121,7 @@ Table 1-1: Process specific entries in /proc .............................................................................. File Content cmdline Command line arguments - cpu Current and last cpu in wich it was executed (2.4)(smp) + cpu Current and last cpu in which it was executed (2.4)(smp) cwd Link to the current working directory environ Values of environment variables exe Link to the executable of this process @@ -309,13 +309,13 @@ is the same by default: > cat /proc/irq/0/smp_affinity ffffffff -It's a bitmask, in wich you can specify wich CPUs can handle the IRQ, you can +It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can set it by doing: > echo 1 > /proc/irq/prof_cpu_mask This means that only the first CPU will handle the IRQ, but you can also echo 5 -wich means that only the first and fourth CPU can handle the IRQ. +which means that only the first and fourth CPU can handle the IRQ. The way IRQs are routed is handled by the IO-APIC, and it's Round Robin between all the CPUs which are allowed to handle it. As usual the kernel has diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 8d4cf78258..4fc8e98743 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -40,7 +40,7 @@ network interface card supports some sort of interrupt load mitigation or + How to use CONFIG_PACKET_MMAP -------------------------------------------------------------------------------- -From the user standpoint, you should use the higher level libpcap library, wich +From the user standpoint, you should use the higher level libpcap library, which is a de facto standard, portable across nearly all operating systems including Win32. @@ -217,8 +217,8 @@ called pg_vec, its size limits the number of blocks that can be allocated. kmalloc allocates any number of bytes of phisically contiguous memory from a pool of pre-determined sizes. This pool of memory is mantained by the slab -allocator wich is at the end the responsible for doing the allocation and -hence wich imposes the maximum memory that kmalloc can allocate. +allocator which is at the end the responsible for doing the allocation and +hence which imposes the maximum memory that kmalloc can allocate. In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The predetermined sizes that kmalloc uses can be checked in the "size-" @@ -254,7 +254,7 @@ and, the number of frames be * / -Suposse the following parameters, wich apply for 2.6 kernel and an +Suposse the following parameters, which apply for 2.6 kernel and an i386 architecture: = 131072 bytes @@ -360,7 +360,7 @@ TP_STATUS_LOSING : indicates there were packet drops from last time statistics where checked with getsockopt() and the PACKET_STATISTICS option. -TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets wich +TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which it's checksum will be done in hardware. So while reading the packet we should not try to check the checksum. diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 82710ae392..5cb96300eb 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -256,7 +256,8 @@ config ACPI_CUSTOM_DSDT_FILE depends on ACPI_CUSTOM_DSDT default "" help - Enter the full path name to the file wich includes the AmlCode declaration. + Enter the full path name to the file which includes the AmlCode + declaration. config ACPI_BLACKLIST_YEAR int "Disable ACPI for systems before Jan 1st this year" if X86_32 diff --git a/drivers/isdn/i4l/isdn_x25iface.c b/drivers/isdn/i4l/isdn_x25iface.c index edf14a2aa3..743ac4077f 100644 --- a/drivers/isdn/i4l/isdn_x25iface.c +++ b/drivers/isdn/i4l/isdn_x25iface.c @@ -7,7 +7,7 @@ * * stuff needed to support the Linux X.25 PLP code on top of devices that * can provide a lab_b service using the concap_proto mechanism. - * This module supports a network interface wich provides lapb_sematics + * This module supports a network interface which provides lapb_sematics * -- as defined in Documentation/networking/x25-iface.txt -- to * the upper layer and assumes that the lower layer provides a reliable * data link service by means of the concap_device_ops callbacks. diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 928e6cf12d..6459edc7f5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -40,7 +40,7 @@ * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it + * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it * will be mapped to. */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a8455c9e79..495db5755d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -102,7 +102,7 @@ static struct usb_driver option_driver = { .no_dynamic_id = 1, }; -/* The card has three separate interfaces, wich the serial driver +/* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ static struct usb_serial_driver option_3port_device = { diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c index 99921df354..8c1a8b5135 100644 --- a/drivers/video/sstfb.c +++ b/drivers/video/sstfb.c @@ -32,7 +32,7 @@ -TODO: at one time or another test that the mode is acceptable by the monitor -ASK: Can I choose different ordering for the color bitfields (rgba argb ...) - wich one should i use ? is there any preferred one ? It seems ARGB is + which one should i use ? is there any preferred one ? It seems ARGB is the one ... -TODO: in set_var check the validity of timings (hsync vsync)... -TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index 591809cbbb..2788b8ca9b 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -98,7 +98,7 @@ static void matrox_w1_write_ddc_bit(void *, u8); * * Using tristate pins, since i can't find any open-drain pin in whole motherboard. * Unfortunately we can't connect to Intel's 82801xx IO controller - * since we don't know motherboard schema, wich has pretty unused(may be not) GPIO. + * since we don't know motherboard schema, which has pretty unused(may be not) GPIO. * * I've heard that PIIX also has open drain pin. * diff --git a/fs/befs/datastream.c b/fs/befs/datastream.c index 785f6b2d5d..b7d6b920f6 100644 --- a/fs/befs/datastream.c +++ b/fs/befs/datastream.c @@ -118,7 +118,7 @@ befs_fblock2brun(struct super_block *sb, befs_data_stream * data, * befs_read_lsmylink - read long symlink from datastream. * @sb: Filesystem superblock * @ds: Datastrem to read from - * @buf: Buffer in wich to place long symlink data + * @buf: Buffer in which to place long symlink data * @len: Length of the long symlink in bytes * * Returns the number of bytes read diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index bf96a61d4b..9a3ec20b0b 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -4,7 +4,7 @@ # # Stage one of module building created the following: # a) The individual .o files used for the module -# b) A .o file wich is the .o files above linked together +# b) A .o file which is the .o files above linked together # c) A .mod file in $(MODVERDIR)/, listing the name of the # the preliminary .o file, plus all .o files