From: Tejun Heo Date: Sat, 15 Dec 2007 06:05:02 +0000 (+0900) Subject: libata-acpi: implement and use ata_acpi_init_gtm() X-Git-Tag: v2.6.24-rc6~23^2~6 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c05e6ff035c1b25d17364a685432b33937d3dc23;p=linux-2.6 libata-acpi: implement and use ata_acpi_init_gtm() _GTM fetches currently configured transfer mode while _STM configures controller according to _GTM parameter and prepares transfer mode configuration TFs for _GTF. In many cases _GTM and _STM implementations are quite brittle and can't cope with configuration changed by libata. libata does not depend on ATA ACPI to configure devices. The only reason libata performs _GTM and _STM are to make _GTF evaluation succeed and libata also doesn't care about how _GTF TFs configure transfer mode. It overrides that configuration anyway, so from libata's POV, it doesn't matter what value is feeded to _STM as long as evaluation succeeds for _STM and following _GTF. This patch adds dev->__acpi_init_gtm and store initial _GTM values on host initialization before modified by reset and mode configuration. If the field is valid, ata_acpi_init_gtm() returns pointer to the saved _GTM structure; otherwise, NULL. This saved value is used for _STM during resume and peek at BIOS/firmware programmed initial timing for later use. The accessor is there to make building w/o ACPI easy as dev->__acpi_init doesn't exist if ACPI is not enabled. On driver detach, the initial BIOS configuration is restored by executing _STM with the initial _GTM values such that the next driver can also use the initial BIOS configured values. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 9e5fc5d75b..b3aeca3687 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -94,6 +94,9 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) dev->acpi_handle = acpi_get_child(ap->acpi_handle, i); } + + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj, @@ -199,7 +202,18 @@ void ata_acpi_associate(struct ata_host *host) */ void ata_acpi_dissociate(struct ata_host *host) { - /* nada */ + int i; + + /* Restore initial _GTM values so that driver which attaches + * afterward can use them too. + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + + if (ap->acpi_handle && gtm) + ata_acpi_stm(ap, gtm); + } } /** @@ -409,22 +423,21 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, int ata_acpi_cbl_80wire(struct ata_port *ap) { - struct ata_acpi_gtm gtm; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); int valid = 0; - /* No _GTM data, no information */ - if (ata_acpi_gtm(ap, >m) < 0) + if (!gtm) return 0; /* Split timing, DMA enabled */ - if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55) valid |= 1; - if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55) + if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55) valid |= 2; /* Shared timing, DMA enabled */ - if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55) valid |= 1; - if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55) valid |= 2; /* Drive check */ @@ -612,27 +625,8 @@ static int ata_acpi_push_id(struct ata_device *dev) */ int ata_acpi_on_suspend(struct ata_port *ap) { - unsigned long flags; - int rc; - - /* proceed iff per-port acpi_handle is valid */ - if (!ap->acpi_handle) - return 0; - BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); - - /* store timing parameters */ - rc = ata_acpi_gtm(ap, &ap->acpi_gtm); - - spin_lock_irqsave(ap->lock, flags); - if (rc == 0) - ap->pflags |= ATA_PFLAG_GTM_VALID; - else - ap->pflags &= ~ATA_PFLAG_GTM_VALID; - spin_unlock_irqrestore(ap->lock, flags); - - if (rc == -ENOENT) - rc = 0; - return rc; + /* nada */ + return 0; } /** @@ -647,14 +641,12 @@ int ata_acpi_on_suspend(struct ata_port *ap) */ void ata_acpi_on_resume(struct ata_port *ap) { + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); struct ata_device *dev; - if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) { - BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); - - /* restore timing parameters */ - ata_acpi_stm(ap, &ap->acpi_gtm); - } + /* restore timing parameters */ + if (ap->acpi_handle && gtm) + ata_acpi_stm(ap, gtm); /* schedule _GTF */ ata_link_for_each_dev(dev, &ap->link) diff --git a/include/linux/libata.h b/include/linux/libata.h index 3784af3955..ba84d8a375 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -211,7 +211,7 @@ enum { ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ - ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */ + ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ @@ -653,7 +653,7 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; - struct ata_acpi_gtm acpi_gtm; + struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ }; @@ -939,10 +939,20 @@ enum { /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI +static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) +{ + if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID) + return &ap->__acpi_init_gtm; + return NULL; +} extern int ata_acpi_cbl_80wire(struct ata_port *ap); int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); #else +static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) +{ + return NULL; +} static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } #endif