From: Jean Delvare Date: Fri, 19 Oct 2007 21:22:55 +0000 (+0200) Subject: Spelling fix: explicitly X-Git-Tag: v2.6.24-rc1~124^2~62 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c03983ac9b268d4bbb8c2600baba5798aefa9d5d;p=linux-2.6 Spelling fix: explicitly From: Jean Delvare Signed-off-by: Jean Delvare Signed-off-by: Adrian Bunk --- diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index ae45d4522e..c5844cb70f 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -97,7 +97,7 @@ * * Revision 1.36 2001/11/22 13:36:36 bjornw * * In ret_from_intr, check regs->dccr for usermode reentrance instead of - * DCCR explicitely (because the latter might not reflect current reality) + * DCCR explicitly (because the latter might not reflect current reality) * * In mmu_bus_fault, set $r9 _after_ calling the C-code instead of before * since $r9 is call-clobbered and is potentially needed afterwards * diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 07628a13c6..77f4b14237 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -959,7 +959,7 @@ stub_is_stopped(int sigval) /* Send register contents. We probably only need to send the * PC, frame pointer and stack pointer here. Other registers will be - * explicitely asked for. But for now, send all. + * explicitly asked for. But for now, send all. */ for (regno = R0; regno <= USP; regno++) { diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S index 9cf83932cd..6a6bdfd698 100644 --- a/arch/cris/arch-v10/lib/dram_init.S +++ b/arch/cris/arch-v10/lib/dram_init.S @@ -40,7 +40,7 @@ * Copy warning from head.S about r8 and r9 * * Revision 1.7 2001/04/18 12:05:39 bjornw - * Fixed comments, and explicitely include config.h to be sure its there + * Fixed comments, and explicitly include config.h to be sure its there * * Revision 1.6 2001/04/10 06:20:16 starvik * Delay should be 200us, not 200ns @@ -66,7 +66,7 @@ */ /* Just to be certain the config file is included, we include it here - * explicitely instead of depending on it being included in the file that + * explicitly instead of depending on it being included in the file that * uses this code. */ diff --git a/arch/cris/arch-v32/lib/dram_init.S b/arch/cris/arch-v32/lib/dram_init.S index 158b3dbb4d..218fbe259e 100644 --- a/arch/cris/arch-v32/lib/dram_init.S +++ b/arch/cris/arch-v32/lib/dram_init.S @@ -12,7 +12,7 @@ */ /* Just to be certain the config file is included, we include it here - * explicitely instead of depending on it being included in the file that + * explicitly instead of depending on it being included in the file that * uses this code. */ diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 8b4a4ee85e..f1ee0b3f78 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -113,7 +113,7 @@ setup_604_hid0: * around #3 and with the same fix we use. We may want to * check if the CPU is using 60x bus mode in which case * the workaround for errata #4 is useless. Also, we may - * want to explicitely clear HID0_NOPDST as this is not + * want to explicitly clear HID0_NOPDST as this is not * needed once we have applied workaround #5 (though it's * not set by Apple's firmware at least). */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2250f9e6c5..b0e5deb427 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -491,7 +491,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, /* Legacy flags are left to default at this point, * one can then use irq_create_mapping() to - * explicitely change them + * explicitly change them */ ops->map(host, i, i); } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index da316d13d7..21a9c0b69a 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -906,7 +906,7 @@ static void psmouse_activate(struct psmouse *psmouse) /* * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion - * reports from it unless we explicitely request it. + * reports from it unless we explicitly request it. */ static void psmouse_deactivate(struct psmouse *psmouse) diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index 4a321576f3..404eedd5ff 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -330,7 +330,7 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse) /* * Check for Power-On-Reset packets. These are sent out - * after plugging the mouse in, or when explicitely + * after plugging the mouse in, or when explicitly * requested by sending 'T'. * * [0]: 1 0 1 0 R3 R2 R1 R0 diff --git a/drivers/isdn/act2000/act2000_isa.c b/drivers/isdn/act2000/act2000_isa.c index 09ea50dd34..819ea85576 100644 --- a/drivers/isdn/act2000/act2000_isa.c +++ b/drivers/isdn/act2000/act2000_isa.c @@ -126,7 +126,7 @@ act2000_isa_enable_irq(act2000_card * card) /* * Install interrupt handler, enable irq on card. - * If irq is -1, choose next free irq, else irq is given explicitely. + * If irq is -1, choose next free irq, else irq is given explicitly. */ int act2000_isa_config_irq(act2000_card * card, short irq) diff --git a/drivers/isdn/hardware/eicon/capifunc.c b/drivers/isdn/hardware/eicon/capifunc.c index 82edc1c1db..4d425c644d 100644 --- a/drivers/isdn/hardware/eicon/capifunc.c +++ b/drivers/isdn/hardware/eicon/capifunc.c @@ -321,7 +321,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...) DBG_BLK((((char *)(long)GET_DWORD(&msg.info.data_b3_ind.Data)) + i, ((dlength - i) < 256) ? (dlength - i) : 256)) if (!(myDriverDebugHandle.dbgMask & DL_PRV0)) - break; /* not more if not explicitely requested */ + break; /* not more if not explicitly requested */ } } break; @@ -965,7 +965,7 @@ static u16 diva_send_message(struct capi_ctr *ctrl, ((GET_WORD(&msg->info.data_b3_req.Data_Length) - j) < 256) ? (GET_WORD(&msg->info.data_b3_req.Data_Length) - j) : 256)) if (!(myDriverDebugHandle.dbgMask & DL_PRV0)) - break; /* not more if not explicitely requested */ + break; /* not more if not explicitly requested */ } } #endif diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index f7c509b7a8..dc741d3a45 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -1521,7 +1521,7 @@ pmu_sr_intr(void) req = current_req; /* * For PMU sleep and freq change requests, we lock the - * PMU until it's explicitely unlocked. This avoids any + * PMU until it's explicitly unlocked. This avoids any * spurrious event polling getting in */ current_req = req->next; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h index 9ecf2bf0d2..47c135a7f4 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h @@ -87,7 +87,7 @@ void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm, /* RX header as received from the hardware. */ struct bcm43xx_rxhdr { - /* Frame Length. Must be generated explicitely in PIO mode. */ + /* Frame Length. Must be generated explicitly in PIO mode. */ __le16 frame_length; PAD_BYTES(2); /* Flags field 1 */ diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index c144e3cdb8..92314c365a 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -6012,7 +6012,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, * ends up causing problems. So, we just handle * the WX extensions through the ipw2100_ioctl interface */ - /* memset() puts everything to 0, so we only have explicitely set + /* memset() puts everything to 0, so we only have explicitly set * those values that need to be something else */ /* If power management is turned on, default to AUTO mode */ @@ -7470,7 +7470,7 @@ static int ipw2100_wx_set_power(struct net_device *dev, switch (wrqu->power.flags & IW_POWER_MODE) { case IW_POWER_ON: /* If not specified */ case IW_POWER_MODE: /* If set all mask */ - case IW_POWER_ALL_R: /* If explicitely state all */ + case IW_POWER_ALL_R: /* If explicitly state all */ break; default: /* Otherwise we don't support it */ IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index feb8fcbab2..e3c828401b 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -9603,7 +9603,7 @@ static int ipw_wx_set_power(struct net_device *dev, switch (wrqu->power.flags & IW_POWER_MODE) { case IW_POWER_ON: /* If not specified */ case IW_POWER_MODE: /* If set all mask */ - case IW_POWER_ALL_R: /* If explicitely state all */ + case IW_POWER_ALL_R: /* If explicitly state all */ break; default: /* Otherwise we don't support it */ IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h index 6e5b952312..ae1fb179b8 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw2.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h @@ -1781,7 +1781,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = { * While testing with bogus QUANTUM drives, the C1010 * sometimes raised a spurious phase mismatch with * WSR and the CHMOV(1) triggered another PM. - * Waiting explicitely for the PHASE seemed to avoid + * Waiting explicitly for the PHASE seemed to avoid * the nested phase mismatch. Btw, this didn't happen * using my IBM drives. */ diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h index 61ffb860da..00123f2383 100644 --- a/drivers/scsi/wd33c93.h +++ b/drivers/scsi/wd33c93.h @@ -155,7 +155,7 @@ #define WD33C93_FS_12_15 OWNID_FS_12 #define WD33C93_FS_16_20 OWNID_FS_16 - /* pass input-clock explicitely. accepted mhz values are 8-10,12-20 */ + /* pass input-clock explicitly. accepted mhz values are 8-10,12-20 */ #define WD33C93_FS_MHZ(mhz) (mhz) /* Control register */ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index bf14ab4ef4..e44cdfc849 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -522,7 +522,7 @@ static inline void name at \ #else /* * Enforce synchronisation of stores vs. spin_unlock - * (this does it explicitely, though our implementation of spin_unlock + * (this does it explicitly, though our implementation of spin_unlock * does it implicitely too) */ static inline void mmiowb(void) diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h index cf80c1af58..32c385dd9e 100644 --- a/include/net/irda/irttp.h +++ b/include/net/irda/irttp.h @@ -56,7 +56,7 @@ /* Receive queue sizes */ /* Minimum of credit that the peer should hold. - * If the peer has less credits than 9 frames, we will explicitely send + * If the peer has less credits than 9 frames, we will explicitly send * him some credits (through irttp_give_credit() and a specific frame). * Note that when we give credits it's likely that it won't be sent in * this LAP window, but in the next one. So, we make sure that the peer @@ -66,7 +66,7 @@ /* This is the default maximum number of credits held by the peer, so the * default maximum number of frames he can send us before needing flow * control answer from us (this may be negociated differently at TSAP setup). - * We want to minimise the number of times we have to explicitely send some + * We want to minimise the number of times we have to explicitly send some * credit to the peer, hoping we can piggyback it on the return data. In * particular, it doesn't make sense for us to send credit more than once * per LAP window. diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 9b58dd67ac..d309e8f199 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -409,7 +409,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, (*crypt)->priv); sec.flags |= (1 << key); /* This ensures a key will be activated if no key is - * explicitely set */ + * explicitly set */ if (key == sec.active_key) sec.flags |= SEC_ACTIVE_KEY;