From: Paul Mundt Date: Tue, 17 Jan 2006 06:14:14 +0000 (-0800) Subject: [PATCH] sh: IRQ handler updates X-Git-Tag: v2.6.16-rc1~68 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=bf3a00f88c926635932c91afd90b4a0907dfbe78;p=linux-2.6 [PATCH] sh: IRQ handler updates This moves the various IRQ controller drivers into a new subdirectory, and also extends the INTC2 IRQ handler to also deal with SH7760 and SH7780 interrupts, rather than just ST-40. The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions, as new ports are expected to be based off of CONFIG_SH_UNKNOWN. Since there are plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make sense anymore. Signed-off-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index cd43714df6..5bfc33bec5 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -2,15 +2,12 @@ # Makefile for the Linux/SuperH CPU-specifc backends. # -obj-y := irq_ipr.o irq_imask.o init.o bus.o +obj-y += irq/ init.o bus.o clock.o obj-$(CONFIG_CPU_SH2) += sh2/ obj-$(CONFIG_CPU_SH3) += sh3/ obj-$(CONFIG_CPU_SH4) += sh4/ -obj-$(CONFIG_SH_RTC) += rtc.o +obj-$(CONFIG_SH_RTC) += rtc.o obj-$(CONFIG_UBC_WAKEUP) += ubc.o -obj-$(CONFIG_SH_ADC) += adc.o - -USE_STANDARD_AS_RULE := true - +obj-$(CONFIG_SH_ADC) += adc.o diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile new file mode 100644 index 0000000000..e3cccea15e --- /dev/null +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Linux/SuperH CPU-specifc IRQ handlers. +# +obj-y += ipr.o imask.o + +obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o +obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq_imask.c b/arch/sh/kernel/cpu/irq/imask.c similarity index 95% rename from arch/sh/kernel/cpu/irq_imask.c rename to arch/sh/kernel/cpu/irq/imask.c index a963d00a97..baed9a550d 100644 --- a/arch/sh/kernel/cpu/irq_imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -1,16 +1,12 @@ -/* $Id: irq_imask.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $ - * - * linux/arch/sh/kernel/irq_imask.c +/* + * arch/sh/kernel/cpu/irq/imask.c * * Copyright (C) 1999, 2000 Niibe Yutaka * * Simple interrupt handling using IMASK of SR register. * */ - /* NOTE: Will not work on level 15 */ - - #include #include #include @@ -19,13 +15,11 @@ #include #include #include - -#include -#include - #include #include #include +#include +#include /* Bitmap of IRQ masked */ static unsigned long imask_mask = 0x7fff; @@ -40,7 +34,7 @@ static void end_imask_irq(unsigned int irq); #define IMASK_PRIORITY 15 static unsigned int startup_imask_irq(unsigned int irq) -{ +{ /* Nothing to do */ return 0; /* never anything pending */ } diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c new file mode 100644 index 0000000000..06e8afab32 --- /dev/null +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -0,0 +1,284 @@ +/* + * Interrupt handling for INTC2-based IRQ. + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * These are the "new Hitachi style" interrupts, as present on the + * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. + */ + +#include +#include +#include +#include +#include +#include + +struct intc2_data { + unsigned char msk_offset; + unsigned char msk_shift; + + int (*clear_irq) (int); +}; + +static struct intc2_data intc2_data[NR_INTC2_IRQS]; + +static void enable_intc2_irq(unsigned int irq); +static void disable_intc2_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_intc2_irq disable_intc2_irq + +static void mask_and_ack_intc2(unsigned int); +static void end_intc2_irq(unsigned int irq); + +static unsigned int startup_intc2_irq(unsigned int irq) +{ + enable_intc2_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type intc2_irq_type = { + .typename = "INTC2-IRQ", + .startup = startup_intc2_irq, + .shutdown = shutdown_intc2_irq, + .enable = enable_intc2_irq, + .disable = disable_intc2_irq, + .ack = mask_and_ack_intc2, + .end = end_intc2_irq +}; + +static void disable_intc2_irq(unsigned int irq) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + int msk_shift, msk_offset; + + /* Sanity check */ + if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) + return; + + msk_shift = intc2_data[irq_offset].msk_shift; + msk_offset = intc2_data[irq_offset].msk_offset; + + ctrl_outl(1 << msk_shift, + INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset); +} + +static void enable_intc2_irq(unsigned int irq) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + int msk_shift, msk_offset; + + /* Sanity check */ + if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) + return; + + msk_shift = intc2_data[irq_offset].msk_shift; + msk_offset = intc2_data[irq_offset].msk_offset; + + ctrl_outl(1 << msk_shift, + INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset); +} + +static void mask_and_ack_intc2(unsigned int irq) +{ + disable_intc2_irq(irq); +} + +static void end_intc2_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_intc2_irq(irq); + + if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)) + intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq); +} + +/* + * Setup an INTC2 style interrupt. + * NOTE: Unlike IPR interrupts, parameters are not shifted by this code, + * allowing the use of the numbers straight out of the datasheet. + * For example: + * PIO1 which is INTPRI00[19,16] and INTMSK00[13] + * would be: ^ ^ ^ ^ + * | | | | + * make_intc2_irq(84, 0, 16, 0, 13); + */ +void make_intc2_irq(unsigned int irq, + unsigned int ipr_offset, unsigned int ipr_shift, + unsigned int msk_offset, unsigned int msk_shift, + unsigned int priority) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + unsigned int flags; + unsigned long ipr; + + if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) + return; + + disable_irq_nosync(irq); + + /* Fill the data we need */ + intc2_data[irq_offset].msk_offset = msk_offset; + intc2_data[irq_offset].msk_shift = msk_shift; + intc2_data[irq_offset].clear_irq = NULL; + + /* Set the priority level */ + local_irq_save(flags); + + ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); + ipr &= ~(0xf << ipr_shift); + ipr |= priority << ipr_shift; + ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); + + local_irq_restore(flags); + + irq_desc[irq].handler = &intc2_irq_type; + + disable_intc2_irq(irq); +} + +static struct intc2_init { + unsigned short irq; + unsigned char ipr_offset, ipr_shift; + unsigned char msk_offset, msk_shift; + unsigned char priority; +} intc2_init_data[] __initdata = { +#if defined(CONFIG_CPU_SUBTYPE_ST40) + {64, 0, 0, 0, 0, 13}, /* PCI serr */ + {65, 0, 4, 0, 1, 13}, /* PCI err */ + {66, 0, 4, 0, 2, 13}, /* PCI ad */ + {67, 0, 4, 0, 3, 13}, /* PCI pwd down */ + {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */ + {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */ + {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */ + {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */ + {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */ + {78, 0, 8, 0, 11, 13}, /* DMAC ERR */ + {80, 0, 12, 0, 12, 13}, /* PIO0 */ + {84, 0, 16, 0, 13, 13}, /* PIO1 */ + {88, 0, 20, 0, 14, 13}, /* PIO2 */ + {112, 4, 0, 4, 0, 13}, /* Mailbox */ + #ifdef CONFIG_CPU_SUBTYPE_ST40GX1 + {116, 4, 4, 4, 4, 13}, /* SSC0 */ + {120, 4, 8, 4, 8, 13}, /* IR Blaster */ + {124, 4, 12, 4, 12, 13}, /* USB host */ + {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */ + {132, 4, 20, 4, 20, 13}, /* UART0 */ + {134, 4, 20, 4, 22, 13}, /* UART2 */ + {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */ + {140, 4, 28, 4, 28, 13}, /* EMPI */ + {144, 8, 0, 8, 0, 13}, /* MAFE */ + {148, 8, 4, 8, 4, 13}, /* PWM */ + {152, 8, 8, 8, 8, 13}, /* SSC1 */ + {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */ + {160, 8, 16, 8, 16, 13}, /* USB target */ + {164, 8, 20, 8, 20, 13}, /* UART1 */ + {168, 8, 24, 8, 24, 13}, /* Teletext */ + {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */ + {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */ + {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */ +#endif +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +/* + * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 + */ + /* INTPRIO0 | INTMSK0 */ + {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ + {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ + {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ + {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ + /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ + /* INTPRIO4 | INTMSK0 */ + {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ + {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ + {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ + {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ + {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ + {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ + {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ + {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ + /* INTPRIO8 | INTMSK0 */ + {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ + {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ + {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ + {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ + {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ + {65, 8, 24, 0, 16, 3}, /* LCDC */ + /* 66, 67 unused */ + {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ + {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ + {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ + /* 71 unused */ + {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ + {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ + {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ + {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ + {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ + {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ + {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ + {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ + /* | INTMSK4 */ + {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ + {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ + {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ + {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ + {84, 8, 0, 4, 19, 3}, /* HSPII */ + /* INTPRIOC | INTMSK4 */ + /* 85-87 unused/reserved */ + {88, 12, 20, 4, 18, 3}, /* MMCI0 */ + {89, 12, 20, 4, 17, 3}, /* MMCI1 */ + {90, 12, 20, 4, 16, 3}, /* MMCI2 */ + {91, 12, 20, 4, 15, 3}, /* MMCI3 */ + {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ + /* 93-107 reserved/undocumented */ + {108,12, 4, 4, 1, 3}, /* ADC */ + {109,12, 0, 4, 0, 3}, /* CMTI */ + /* 110-111 reserved/unused */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) + { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2}, +#ifdef CONFIG_SH_RTC + { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, +#endif + { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + + { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + + { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, + { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, + { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, + { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, + { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, +#endif +}; + +void __init init_IRQ_intc2(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) { + struct intc2_init *p = intc2_init_data + i; + make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, + p-> msk_offset, p->msk_shift, p->priority); + } +} + +/* Adds a termination callback to the interrupt */ +void intc2_add_clear_irq(int irq, int (*fn)(int)) +{ + if (unlikely(irq < INTC2_FIRST_IRQ)) + return; + + intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; +} + diff --git a/arch/sh/kernel/cpu/irq_ipr.c b/arch/sh/kernel/cpu/irq/ipr.c similarity index 56% rename from arch/sh/kernel/cpu/irq_ipr.c rename to arch/sh/kernel/cpu/irq/ipr.c index 71f9209613..fdbd718ae5 100644 --- a/arch/sh/kernel/cpu/irq_ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -1,6 +1,5 @@ -/* $Id: irq_ipr.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $ - * - * linux/arch/sh/kernel/irq_ipr.c +/* + * arch/sh/kernel/cpu/irq/ipr.c * * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi * Copyright (C) 2000 Kazumoto Kojima @@ -109,7 +108,8 @@ static void end_ipr_irq(unsigned int irq) enable_ipr_irq(irq); } -void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) +void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, + int priority, int maskpos) { disable_irq_nosync(irq); ipr_data[irq].addr = addr; @@ -120,126 +120,47 @@ void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) disable_ipr_irq(irq); } -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static unsigned char pint_map[256]; -static unsigned long portcr_mask = 0; - -static void enable_pint_irq(unsigned int irq); -static void disable_pint_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_pint_irq disable_pint_irq - -static void mask_and_ack_pint(unsigned int); -static void end_pint_irq(unsigned int irq); - -static unsigned int startup_pint_irq(unsigned int irq) -{ - enable_pint_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type pint_irq_type = { - .typename = "PINT-IRQ", - .startup = startup_pint_irq, - .shutdown = shutdown_pint_irq, - .enable = enable_pint_irq, - .disable = disable_pint_irq, - .ack = mask_and_ack_pint, - .end = end_pint_irq -}; - -static void disable_pint_irq(unsigned int irq) -{ - unsigned long val, flags; - - local_irq_save(flags); - val = ctrl_inw(INTC_INTER); - val &= ~(1 << (irq - PINT_IRQ_BASE)); - ctrl_outw(val, INTC_INTER); /* disable PINTn */ - portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2); - local_irq_restore(flags); -} - -static void enable_pint_irq(unsigned int irq) -{ - unsigned long val, flags; - - local_irq_save(flags); - val = ctrl_inw(INTC_INTER); - val |= 1 << (irq - PINT_IRQ_BASE); - ctrl_outw(val, INTC_INTER); /* enable PINTn */ - portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2; - local_irq_restore(flags); -} - -static void mask_and_ack_pint(unsigned int irq) -{ - disable_pint_irq(irq); -} - -static void end_pint_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_pint_irq(irq); -} - -void make_pint_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].handler = &pint_irq_type; - disable_pint_irq(irq); -} -#endif - void __init init_IRQ(void) { -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) - int i; -#endif - - make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); - make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); +#ifndef CONFIG_CPU_SUBTYPE_SH7780 + make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0); + make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0); #if defined(CONFIG_SH_RTC) - make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); + make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0); #endif #ifdef SCI_ERI_IRQ - make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); + make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); + make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); #endif #ifdef SCIF1_ERI_IRQ - make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0); + make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0); #endif #ifdef SCIF_ERI_IRQ - make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); #endif #ifdef IRDA_ERI_IRQ - make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ @@ -254,86 +175,32 @@ void __init init_IRQ(void) * You should set corresponding bits of PFC to "00" * to enable these interrupts. */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); - make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); - make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); - make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); - enable_ipr_irq(PINT0_IRQ); - enable_ipr_irq(PINT8_IRQ); + make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0); + make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0); + make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0); + make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0); + make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0); + make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0); +#endif +#endif - for(i = 0; i < 16; i++) - make_pint_irq(PINT_IRQ_BASE + i); - for(i = 0; i < 256; i++) - { - if(i & 1) pint_map[i] = 0; - else if(i & 2) pint_map[i] = 1; - else if(i & 4) pint_map[i] = 2; - else if(i & 8) pint_map[i] = 3; - else if(i & 0x10) pint_map[i] = 4; - else if(i & 0x20) pint_map[i] = 5; - else if(i & 0x40) pint_map[i] = 6; - else if(i & 0x80) pint_map[i] = 7; - } -#endif /* !CONFIG_CPU_SUBTYPE_SH7300 */ -#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 || CONFIG_CPU_SUBTYPE_SH7300*/ +#ifdef CONFIG_CPU_HAS_PINT_IRQ + init_IRQ_pint(); +#endif -#ifdef CONFIG_CPU_SUBTYPE_ST40 +#ifdef CONFIG_CPU_HAS_INTC2_IRQ init_IRQ_intc2(); #endif - /* Perform the machine specific initialisation */ - if (sh_mv.mv_init_irq != NULL) { + if (sh_mv.mv_init_irq != NULL) sh_mv.mv_init_irq(); - } } -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) + +#if !defined(CONFIG_CPU_HAS_PINT_IRQ) int ipr_irq_demux(int irq) { -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) - unsigned long creg, dreg, d, sav; - - if(irq == PINT0_IRQ) - { -#if defined(CONFIG_CPU_SUBTYPE_SH7707) - creg = PORT_PACR; - dreg = PORT_PADR; -#else - creg = PORT_PCCR; - dreg = PORT_PCDR; -#endif - sav = ctrl_inw(creg); - ctrl_outw(sav | portcr_mask, creg); - d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & ctrl_inw(INTC_INTER) & 0xff; - ctrl_outw(sav, creg); - if(d == 0) return irq; - return PINT_IRQ_BASE + pint_map[d]; - } - else if(irq == PINT8_IRQ) - { -#if defined(CONFIG_CPU_SUBTYPE_SH7707) - creg = PORT_PBCR; - dreg = PORT_PBDR; -#else - creg = PORT_PFCR; - dreg = PORT_PFDR; -#endif - sav = ctrl_inw(creg); - ctrl_outw(sav | (portcr_mask >> 16), creg); - d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & (ctrl_inw(INTC_INTER) >> 8) & 0xff; - ctrl_outw(sav, creg); - if(d == 0) return irq; - return PINT_IRQ_BASE + 8 + pint_map[d]; - } -#endif return irq; } #endif EXPORT_SYMBOL(make_ipr_irq); - diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c new file mode 100644 index 0000000000..95d6024fe1 --- /dev/null +++ b/arch/sh/kernel/cpu/irq/pint.c @@ -0,0 +1,169 @@ +/* + * arch/sh/kernel/cpu/irq/pint.c - Interrupt handling for PINT-based IRQs. + * + * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2003 Takashi Kusuda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +#include +#include +#include + +static unsigned char pint_map[256]; +static unsigned long portcr_mask; + +static void enable_pint_irq(unsigned int irq); +static void disable_pint_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_pint_irq disable_pint_irq + +static void mask_and_ack_pint(unsigned int); +static void end_pint_irq(unsigned int irq); + +static unsigned int startup_pint_irq(unsigned int irq) +{ + enable_pint_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type pint_irq_type = { + .typename = "PINT-IRQ", + .startup = startup_pint_irq, + .shutdown = shutdown_pint_irq, + .enable = enable_pint_irq, + .disable = disable_pint_irq, + .ack = mask_and_ack_pint, + .end = end_pint_irq +}; + +static void disable_pint_irq(unsigned int irq) +{ + unsigned long val, flags; + + local_irq_save(flags); + val = ctrl_inw(INTC_INTER); + val &= ~(1 << (irq - PINT_IRQ_BASE)); + ctrl_outw(val, INTC_INTER); /* disable PINTn */ + portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2); + local_irq_restore(flags); +} + +static void enable_pint_irq(unsigned int irq) +{ + unsigned long val, flags; + + local_irq_save(flags); + val = ctrl_inw(INTC_INTER); + val |= 1 << (irq - PINT_IRQ_BASE); + ctrl_outw(val, INTC_INTER); /* enable PINTn */ + portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2; + local_irq_restore(flags); +} + +static void mask_and_ack_pint(unsigned int irq) +{ + disable_pint_irq(irq); +} + +static void end_pint_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_pint_irq(irq); +} + +void make_pint_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &pint_irq_type; + disable_pint_irq(irq); +} + +void __init init_IRQ_pint(void) +{ + int i; + + make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); + make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); + + enable_irq(PINT0_IRQ); + enable_irq(PINT8_IRQ); + + for(i = 0; i < 16; i++) + make_pint_irq(PINT_IRQ_BASE + i); + + for(i = 0; i < 256; i++) { + if (i & 1) + pint_map[i] = 0; + else if (i & 2) + pint_map[i] = 1; + else if (i & 4) + pint_map[i] = 2; + else if (i & 8) + pint_map[i] = 3; + else if (i & 0x10) + pint_map[i] = 4; + else if (i & 0x20) + pint_map[i] = 5; + else if (i & 0x40) + pint_map[i] = 6; + else if (i & 0x80) + pint_map[i] = 7; + } +} + +int ipr_irq_demux(int irq) +{ + unsigned long creg, dreg, d, sav; + + if (irq == PINT0_IRQ) { +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + creg = PORT_PACR; + dreg = PORT_PADR; +#else + creg = PORT_PCCR; + dreg = PORT_PCDR; +#endif + sav = ctrl_inw(creg); + ctrl_outw(sav | portcr_mask, creg); + d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & + ctrl_inw(INTC_INTER) & 0xff; + ctrl_outw(sav, creg); + + if (d == 0) + return irq; + + return PINT_IRQ_BASE + pint_map[d]; + } else if (irq == PINT8_IRQ) { +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + creg = PORT_PBCR; + dreg = PORT_PBDR; +#else + creg = PORT_PFCR; + dreg = PORT_PFDR; +#endif + sav = ctrl_inw(creg); + ctrl_outw(sav | (portcr_mask >> 16), creg); + d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & + (ctrl_inw(INTC_INTER) >> 8) & 0xff; + ctrl_outw(sav, creg); + + if (d == 0) + return irq; + + return PINT_IRQ_BASE + 8 + pint_map[d]; + } + + return irq; +} + diff --git a/arch/sh/kernel/cpu/sh4/irq_intc2.c b/arch/sh/kernel/cpu/sh4/irq_intc2.c deleted file mode 100644 index f6b16ba019..0000000000 --- a/arch/sh/kernel/cpu/sh4/irq_intc2.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * linux/arch/sh/kernel/irq_intc2.c - * - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Interrupt handling for INTC2-based IRQ. - * - * These are the "new Hitachi style" interrupts, as present on the - * Hitachi 7751 and the STM ST40 STB1. - */ - -#include -#include -#include - -#include -#include -#include - - -struct intc2_data { - unsigned char msk_offset; - unsigned char msk_shift; -#ifdef CONFIG_CPU_SUBTYPE_ST40 - int (*clear_irq) (int); -#endif -}; - - -static struct intc2_data intc2_data[NR_INTC2_IRQS]; - -static void enable_intc2_irq(unsigned int irq); -static void disable_intc2_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_intc2_irq disable_intc2_irq - -static void mask_and_ack_intc2(unsigned int); -static void end_intc2_irq(unsigned int irq); - -static unsigned int startup_intc2_irq(unsigned int irq) -{ - enable_intc2_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type intc2_irq_type = { - .typename = "INTC2-IRQ", - .startup = startup_intc2_irq, - .shutdown = shutdown_intc2_irq, - .enable = enable_intc2_irq, - .disable = disable_intc2_irq, - .ack = mask_and_ack_intc2, - .end = end_intc2_irq -}; - -static void disable_intc2_irq(unsigned int irq) -{ - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - // Sanity check - if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1<=NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1<=NR_INTC2_IRQS)) - return; - - disable_irq_nosync(irq); - - /* Fill the data we need */ - intc2_data[irq_offset].msk_offset = msk_offset; - intc2_data[irq_offset].msk_shift = msk_shift; -#ifdef CONFIG_CPU_SUBTYPE_ST40 - intc2_data[irq_offset].clear_irq = NULL; -#endif - - /* Set the priority level */ - local_irq_save(flags); - - ipr=ctrl_inl(INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset); - ipr&=~(0xf<irq, p->ipr_offset, p->ipr_shift, - p-> msk_offset, p->msk_shift, 13); - } -} - -/* Adds a termination callback to the interrupt */ -void intc2_add_clear_irq(int irq, int (*fn)(int)) -{ - if (irq < INTC2_FIRST_IRQ) - return; - - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; -} - -#endif /* CONFIG_CPU_SUBTYPE_ST40 */ diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 54c171225b..6883c00728 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -8,38 +8,13 @@ * SuperH version: Copyright (C) 1999 Niibe Yutaka */ -/* - * IRQs are in fact implemented a bit like signal handlers for the kernel. - * Naturally it's not a 1:1 relation, but there are similarities. - */ - -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include -#include - -#include -#include -#include -#include #include -#include - +#include +#include /* * 'what should we do if we get a hw irq event on an illegal vector'. @@ -66,7 +41,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); } - if (i < ACTUAL_NR_IRQS) { + if (i < NR_IRQS) { spin_lock_irqsave(&irq_desc[i].lock, flags); action = irq_desc[i].action; if (!action) @@ -86,19 +61,32 @@ unlock: } #endif + asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) -{ - int irq; +{ + int irq = r4; irq_enter(); - asm volatile("stc r2_bank, %0\n\t" - "shlr2 %0\n\t" - "shlr2 %0\n\t" - "shlr %0\n\t" - "add #-16, %0\n\t" - :"=z" (irq)); + +#ifdef CONFIG_CPU_HAS_INTEVT + __asm__ __volatile__ ( +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r2_bank, %0\n\t" +#else + "mov.l @%1, %0\n\t" +#endif + "shlr2 %0\n\t" + "shlr2 %0\n\t" + "shlr %0\n\t" + "add #-16, %0\n\t" + : "=z" (irq), "=r" (r4) + : "1" (INTEVT) + : "memory" + ); +#endif + irq = irq_demux(irq); __do_IRQ(irq, ®s); irq_exit(); diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h new file mode 100644 index 0000000000..8c8ca12810 --- /dev/null +++ b/include/asm-sh/irq-sh7780.h @@ -0,0 +1,349 @@ +#ifndef __ASM_SH_IRQ_SH7780_H +#define __ASM_SH_IRQ_SH7780_H + +/* + * linux/include/asm-sh/irq-sh7780.h + * + * Copyright (C) 2004 Takashi SHUDO + */ + +#ifdef CONFIG_IDE +# ifndef IRQ_CFCARD +# define IRQ_CFCARD 14 +# endif +# ifndef IRQ_PCMCIA +# define IRQ_PCMCIA 15 +# endif +#endif + +#define INTC_BASE 0xffd00000 +#define INTC_ICR0 (INTC_BASE+0x0) +#define INTC_ICR1 (INTC_BASE+0x1c) +#define INTC_INTPRI (INTC_BASE+0x10) +#define INTC_INTREQ (INTC_BASE+0x24) +#define INTC_INTMSK0 (INTC_BASE+0x44) +#define INTC_INTMSK1 (INTC_BASE+0x48) +#define INTC_INTMSK2 (INTC_BASE+0x40080) +#define INTC_INTMSKCLR0 (INTC_BASE+0x64) +#define INTC_INTMSKCLR1 (INTC_BASE+0x68) +#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) +#define INTC_NMIFCR (INTC_BASE+0xc0) +#define INTC_USERIMASK (INTC_BASE+0x30000) + +#define INTC_INT2PRI0 (INTC_BASE+0x40000) +#define INTC_INT2PRI1 (INTC_BASE+0x40004) +#define INTC_INT2PRI2 (INTC_BASE+0x40008) +#define INTC_INT2PRI3 (INTC_BASE+0x4000c) +#define INTC_INT2PRI4 (INTC_BASE+0x40010) +#define INTC_INT2PRI5 (INTC_BASE+0x40014) +#define INTC_INT2PRI6 (INTC_BASE+0x40018) +#define INTC_INT2PRI7 (INTC_BASE+0x4001c) +#define INTC_INT2A0 (INTC_BASE+0x40030) +#define INTC_INT2A1 (INTC_BASE+0x40034) +#define INTC_INT2MSKR (INTC_BASE+0x40038) +#define INTC_INT2MSKCR (INTC_BASE+0x4003c) +#define INTC_INT2B0 (INTC_BASE+0x40040) +#define INTC_INT2B1 (INTC_BASE+0x40044) +#define INTC_INT2B2 (INTC_BASE+0x40048) +#define INTC_INT2B3 (INTC_BASE+0x4004c) +#define INTC_INT2B4 (INTC_BASE+0x40050) +#define INTC_INT2B5 (INTC_BASE+0x40054) +#define INTC_INT2B6 (INTC_BASE+0x40058) +#define INTC_INT2B7 (INTC_BASE+0x4005c) +#define INTC_INT2GPIC (INTC_BASE+0x40090) +/* + NOTE: + *_IRQ = (INTEVT2 - 0x200)/0x20 +*/ +/* IRQ 0-7 line external int*/ +#define IRQ0_IRQ 2 +#define IRQ0_IPR_ADDR INTC_INTPRI +#define IRQ0_IPR_POS 7 +#define IRQ0_PRIORITY 2 + +#define IRQ1_IRQ 4 +#define IRQ1_IPR_ADDR INTC_INTPRI +#define IRQ1_IPR_POS 6 +#define IRQ1_PRIORITY 2 + +#define IRQ2_IRQ 6 +#define IRQ2_IPR_ADDR INTC_INTPRI +#define IRQ2_IPR_POS 5 +#define IRQ2_PRIORITY 2 + +#define IRQ3_IRQ 8 +#define IRQ3_IPR_ADDR INTC_INTPRI +#define IRQ3_IPR_POS 4 +#define IRQ3_PRIORITY 2 + +#define IRQ4_IRQ 10 +#define IRQ4_IPR_ADDR INTC_INTPRI +#define IRQ4_IPR_POS 3 +#define IRQ4_PRIORITY 2 + +#define IRQ5_IRQ 12 +#define IRQ5_IPR_ADDR INTC_INTPRI +#define IRQ5_IPR_POS 2 +#define IRQ5_PRIORITY 2 + +#define IRQ6_IRQ 14 +#define IRQ6_IPR_ADDR INTC_INTPRI +#define IRQ6_IPR_POS 1 +#define IRQ6_PRIORITY 2 + +#define IRQ7_IRQ 0 +#define IRQ7_IPR_ADDR INTC_INTPRI +#define IRQ7_IPR_POS 0 +#define IRQ7_PRIORITY 2 + +/* TMU */ +/* ch0 */ +#define TMU_IRQ 28 +#define TMU_IPR_ADDR INTC_INT2PRI0 +#define TMU_IPR_POS 3 +#define TMU_PRIORITY 2 + +#define TIMER_IRQ 28 +#define TIMER_IPR_ADDR INTC_INT2PRI0 +#define TIMER_IPR_POS 3 +#define TIMER_PRIORITY 2 + +/* ch 1*/ +#define TMU_CH1_IRQ 29 +#define TMU_CH1_IPR_ADDR INTC_INT2PRI0 +#define TMU_CH1_IPR_POS 2 +#define TMU_CH1_PRIORITY 2 + +#define TIMER1_IRQ 29 +#define TIMER1_IPR_ADDR INTC_INT2PRI0 +#define TIMER1_IPR_POS 2 +#define TIMER1_PRIORITY 2 + +/* ch 2*/ +#define TMU_CH2_IRQ 30 +#define TMU_CH2_IPR_ADDR INTC_INT2PRI0 +#define TMU_CH2_IPR_POS 1 +#define TMU_CH2_PRIORITY 2 +/* ch 2 Input capture */ +#define TMU_CH2IC_IRQ 31 +#define TMU_CH2IC_IPR_ADDR INTC_INT2PRI0 +#define TMU_CH2IC_IPR_POS 0 +#define TMU_CH2IC_PRIORITY 2 +/* ch 3 */ +#define TMU_CH3_IRQ 96 +#define TMU_CH3_IPR_ADDR INTC_INT2PRI1 +#define TMU_CH3_IPR_POS 3 +#define TMU_CH3_PRIORITY 2 +/* ch 4 */ +#define TMU_CH4_IRQ 97 +#define TMU_CH4_IPR_ADDR INTC_INT2PRI1 +#define TMU_CH4_IPR_POS 2 +#define TMU_CH4_PRIORITY 2 +/* ch 5*/ +#define TMU_CH5_IRQ 98 +#define TMU_CH5_IPR_ADDR INTC_INT2PRI1 +#define TMU_CH5_IPR_POS 1 +#define TMU_CH5_PRIORITY 2 + +#define RTC_IRQ 22 +#define RTC_IPR_ADDR INTC_INT2PRI1 +#define RTC_IPR_POS 0 +#define RTC_PRIORITY TIMER_PRIORITY + +/* SCIF0 */ +#define SCIF0_ERI_IRQ 40 +#define SCIF0_RXI_IRQ 41 +#define SCIF0_BRI_IRQ 42 +#define SCIF0_TXI_IRQ 43 +#define SCIF0_IPR_ADDR INTC_INT2PRI2 +#define SCIF0_IPR_POS 3 +#define SCIF0_PRIORITY 3 + +/* SCIF1 */ +#define SCIF1_ERI_IRQ 76 +#define SCIF1_RXI_IRQ 77 +#define SCIF1_BRI_IRQ 78 +#define SCIF1_TXI_IRQ 79 +#define SCIF1_IPR_ADDR INTC_INT2PRI2 +#define SCIF1_IPR_POS 2 +#define SCIF1_PRIORITY 3 + +#define WDT_IRQ 27 +#define WDT_IPR_ADDR INTC_INT2PRI2 +#define WDT_IPR_POS 1 +#define WDT_PRIORITY 2 + +/* DMAC(0) */ +#define DMINT0_IRQ 34 +#define DMINT1_IRQ 35 +#define DMINT2_IRQ 36 +#define DMINT3_IRQ 37 +#define DMINT4_IRQ 44 +#define DMINT5_IRQ 45 +#define DMINT6_IRQ 46 +#define DMINT7_IRQ 47 +#define DMAE_IRQ 38 +#define DMA0_IPR_ADDR INTC_INT2PRI3 +#define DMA0_IPR_POS 2 +#define DMA0_PRIORITY 7 + +/* DMAC(1) */ +#define DMINT8_IRQ 92 +#define DMINT9_IRQ 93 +#define DMINT10_IRQ 94 +#define DMINT11_IRQ 95 +#define DMA1_IPR_ADDR INTC_INT2PRI3 +#define DMA1_IPR_POS 1 +#define DMA1_PRIORITY 7 + +#define DMTE0_IRQ DMINT0_IRQ +#define DMTE4_IRQ DMINT4_IRQ +#define DMA_IPR_ADDR DMA0_IPR_ADDR +#define DMA_IPR_POS DMA0_IPR_POS +#define DMA_PRIORITY DMA0_PRIORITY + +/* CMT */ +#define CMT_IRQ 56 +#define CMT_IPR_ADDR INTC_INT2PRI4 +#define CMT_IPR_POS 3 +#define CMT_PRIORITY 0 + +/* HAC */ +#define HAC_IRQ 60 +#define HAC_IPR_ADDR INTC_INT2PRI4 +#define HAC_IPR_POS 2 +#define CMT_PRIORITY 0 + +/* PCIC(0) */ +#define PCIC0_IRQ 64 +#define PCIC0_IPR_ADDR INTC_INT2PRI4 +#define PCIC0_IPR_POS 1 +#define PCIC0_PRIORITY 2 + +/* PCIC(1) */ +#define PCIC1_IRQ 65 +#define PCIC1_IPR_ADDR INTC_INT2PRI4 +#define PCIC1_IPR_POS 0 +#define PCIC1_PRIORITY 2 + +/* PCIC(2) */ +#define PCIC2_IRQ 66 +#define PCIC2_IPR_ADDR INTC_INT2PRI5 +#define PCIC2_IPR_POS 3 +#define PCIC2_PRIORITY 2 + +/* PCIC(3) */ +#define PCIC3_IRQ 67 +#define PCIC3_IPR_ADDR INTC_INT2PRI5 +#define PCIC3_IPR_POS 2 +#define PCIC3_PRIORITY 2 + +/* PCIC(4) */ +#define PCIC4_IRQ 68 +#define PCIC4_IPR_ADDR INTC_INT2PRI5 +#define PCIC4_IPR_POS 1 +#define PCIC4_PRIORITY 2 + +/* PCIC(5) */ +#define PCICERR_IRQ 69 +#define PCICPWD3_IRQ 70 +#define PCICPWD2_IRQ 71 +#define PCICPWD1_IRQ 72 +#define PCICPWD0_IRQ 73 +#define PCIC5_IPR_ADDR INTC_INT2PRI5 +#define PCIC5_IPR_POS 0 +#define PCIC5_PRIORITY 2 + +/* SIOF */ +#define SIOF_IRQ 80 +#define SIOF_IPR_ADDR INTC_INT2PRI6 +#define SIOF_IPR_POS 3 +#define SIOF_PRIORITY 3 + +/* HSPI */ +#define HSPI_IRQ 84 +#define HSPI_IPR_ADDR INTC_INT2PRI6 +#define HSPI_IPR_POS 2 +#define HSPI_PRIORITY 3 + +/* MMCIF */ +#define MMCIF_FSTAT_IRQ 88 +#define MMCIF_TRAN_IRQ 89 +#define MMCIF_ERR_IRQ 90 +#define MMCIF_FRDY_IRQ 91 +#define MMCIF_IPR_ADDR INTC_INT2PRI6 +#define MMCIF_IPR_POS 1 +#define HSPI_PRIORITY 3 + +/* SSI */ +#define SSI_IRQ 100 +#define SSI_IPR_ADDR INTC_INT2PRI6 +#define SSI_IPR_POS 0 +#define SSI_PRIORITY 3 + +/* FLCTL */ +#define FLCTL_FLSTE_IRQ 104 +#define FLCTL_FLTEND_IRQ 105 +#define FLCTL_FLTRQ0_IRQ 106 +#define FLCTL_FLTRQ1_IRQ 107 +#define FLCTL_IPR_ADDR INTC_INT2PRI7 +#define FLCTL_IPR_POS 3 +#define FLCTL_PRIORITY 3 + +/* GPIO */ +#define GPIO0_IRQ 108 +#define GPIO1_IRQ 109 +#define GPIO2_IRQ 110 +#define GPIO3_IRQ 111 +#define GPIO_IPR_ADDR INTC_INT2PRI7 +#define GPIO_IPR_POS 2 +#define GPIO_PRIORITY 3 + +/* ONCHIP_NR_IRQS */ +#define NR_IRQS 150 /* 111 + 16 */ + +/* In a generic kernel, NR_IRQS is an upper bound, and we should use + * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value. + */ +#define ACTUAL_NR_IRQS NR_IRQS + +extern void disable_irq(unsigned int); +extern void disable_irq_nosync(unsigned int); +extern void enable_irq(unsigned int); + +/* + * Simple Mask Register Support + */ +extern void make_maskreg_irq(unsigned int irq); +extern unsigned short *irq_mask_register; + +/* + * Function for "on chip support modules". + */ +extern void make_imask_irq(unsigned int irq); + +#define INTC_TMU0_MSK 0 +#define INTC_TMU3_MSK 1 +#define INTC_RTC_MSK 2 +#define INTC_SCIF0_MSK 3 +#define INTC_SCIF1_MSK 4 +#define INTC_WDT_MSK 5 +#define INTC_HUID_MSK 7 +#define INTC_DMAC0_MSK 8 +#define INTC_DMAC1_MSK 9 +#define INTC_CMT_MSK 12 +#define INTC_HAC_MSK 13 +#define INTC_PCIC0_MSK 14 +#define INTC_PCIC1_MSK 15 +#define INTC_PCIC2_MSK 16 +#define INTC_PCIC3_MSK 17 +#define INTC_PCIC4_MSK 18 +#define INTC_PCIC5_MSK 19 +#define INTC_SIOF_MSK 20 +#define INTC_HSPI_MSK 21 +#define INTC_MMCIF_MSK 22 +#define INTC_SSI_MSK 23 +#define INTC_FLCTL_MSK 24 +#define INTC_GPIO_MSK 25 + +#endif /* __ASM_SH_IRQ_SH7780_H */ diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index 614a8c13b7..060ec3c272 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -15,13 +15,20 @@ #include #include /* for pt_regs */ -#if defined(CONFIG_SH_HP600) || \ +#if defined(CONFIG_SH_HP6XX) || \ defined(CONFIG_SH_RTS7751R2D) || \ defined(CONFIG_SH_HS7751RVOIP) || \ - defined(CONFIG_SH_SH03) + defined(CONFIG_SH_HS7751RVOIP) || \ + defined(CONFIG_SH_SH03) || \ + defined(CONFIG_SH_R7780RP) || \ + defined(CONFIG_SH_LANDISK) #include #endif +#ifndef CONFIG_CPU_SUBTYPE_SH7780 + +#define INTC_DMAC0_MSK 0 + #if defined(CONFIG_CPU_SH3) #define INTC_IPRA 0xfffffee2UL #define INTC_IPRB 0xfffffee4UL @@ -235,8 +242,9 @@ #define SCIF1_IPR_ADDR INTC_IPRB #define SCIF1_IPR_POS 1 #define SCIF1_PRIORITY 3 -#endif -#endif +#endif /* ST40STB1 */ + +#endif /* 775x / SH4-202 / ST40STB1 */ /* NR_IRQS is made from three components: * 1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules @@ -245,37 +253,35 @@ */ /* 1. ONCHIP_NR_IRQS */ -#ifdef CONFIG_SH_GENERIC +#if defined(CONFIG_CPU_SUBTYPE_SH7604) +# define ONCHIP_NR_IRQS 24 // Actually 21 +#elif defined(CONFIG_CPU_SUBTYPE_SH7707) +# define ONCHIP_NR_IRQS 64 +# define PINT_NR_IRQS 16 +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) +# define ONCHIP_NR_IRQS 32 +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7705) +# define ONCHIP_NR_IRQS 64 // Actually 61 +# define PINT_NR_IRQS 16 +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) +# define ONCHIP_NR_IRQS 48 // Actually 44 +#elif defined(CONFIG_CPU_SUBTYPE_SH7751) +# define ONCHIP_NR_IRQS 72 +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +# define ONCHIP_NR_IRQS 112 /* XXX */ +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +# define ONCHIP_NR_IRQS 72 +#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) +# define ONCHIP_NR_IRQS 144 +#elif defined(CONFIG_CPU_SUBTYPE_SH7300) +# define ONCHIP_NR_IRQS 109 +#elif defined(CONFIG_SH_UNKNOWN) /* Most be last */ # define ONCHIP_NR_IRQS 144 -#else -# if defined(CONFIG_CPU_SUBTYPE_SH7604) -# define ONCHIP_NR_IRQS 24 // Actually 21 -# elif defined(CONFIG_CPU_SUBTYPE_SH7707) -# define ONCHIP_NR_IRQS 64 -# define PINT_NR_IRQS 16 -# elif defined(CONFIG_CPU_SUBTYPE_SH7708) -# define ONCHIP_NR_IRQS 32 -# elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) -# define ONCHIP_NR_IRQS 64 // Actually 61 -# define PINT_NR_IRQS 16 -# elif defined(CONFIG_CPU_SUBTYPE_SH7750) -# define ONCHIP_NR_IRQS 48 // Actually 44 -# elif defined(CONFIG_CPU_SUBTYPE_SH7751) -# define ONCHIP_NR_IRQS 72 -# elif defined(CONFIG_CPU_SUBTYPE_SH7760) -# define ONCHIP_NR_IRQS 110 -# elif defined(CONFIG_CPU_SUBTYPE_SH4_202) -# define ONCHIP_NR_IRQS 72 -# elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) -# define ONCHIP_NR_IRQS 144 -# elif defined(CONFIG_CPU_SUBTYPE_SH7300) -# define ONCHIP_NR_IRQS 109 -# endif #endif /* 2. PINT_NR_IRQS */ -#ifdef CONFIG_SH_GENERIC +#ifdef CONFIG_SH_UNKNOWN # define PINT_NR_IRQS 16 #else # ifndef PINT_NR_IRQS @@ -288,22 +294,22 @@ #endif /* 3. OFFCHIP_NR_IRQS */ -#ifdef CONFIG_SH_GENERIC +#if defined(CONFIG_HD64461) +# define OFFCHIP_NR_IRQS 18 +#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */ +# define OFFCHIP_NR_IRQS 48 +#elif defined(CONFIG_HD64465) # define OFFCHIP_NR_IRQS 16 +#elif defined (CONFIG_SH_EC3104) +# define OFFCHIP_NR_IRQS 16 +#elif defined (CONFIG_SH_DREAMCAST) +# define OFFCHIP_NR_IRQS 96 +#elif defined (CONFIG_SH_TITAN) +# define OFFCHIP_NR_IRQS 4 +#elif defined(CONFIG_SH_UNKNOWN) +# define OFFCHIP_NR_IRQS 16 /* Must also be last */ #else -# if defined(CONFIG_HD64461) -# define OFFCHIP_NR_IRQS 18 -# elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */ -# define OFFCHIP_NR_IRQS 48 -# elif defined(CONFIG_HD64465) -# define OFFCHIP_NR_IRQS 16 -# elif defined (CONFIG_SH_EC3104) -# define OFFCHIP_NR_IRQS 16 -# elif defined (CONFIG_SH_DREAMCAST) -# define OFFCHIP_NR_IRQS 96 -# else -# define OFFCHIP_NR_IRQS 0 -# endif +# define OFFCHIP_NR_IRQS 0 #endif #if OFFCHIP_NR_IRQS > 0 @@ -313,16 +319,6 @@ /* NR_IRQS. 1+2+3 */ #define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS) -/* In a generic kernel, NR_IRQS is an upper bound, and we should use - * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value. - */ -#ifdef CONFIG_SH_GENERIC -# define ACTUAL_NR_IRQS (sh_mv.mv_nr_irqs) -#else -# define ACTUAL_NR_IRQS NR_IRQS -#endif - - extern void disable_irq(unsigned int); extern void disable_irq_nosync(unsigned int); extern void enable_irq(unsigned int); @@ -542,9 +538,6 @@ extern int ipr_irq_demux(int irq); extern int ipr_irq_demux(int irq); #define __irq_demux(irq) ipr_irq_demux(irq) - -#else -#define __irq_demux(irq) irq #endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \ @@ -557,18 +550,35 @@ extern int ipr_irq_demux(int irq); #define INTC_ICR_IRLM (1<<7) #endif -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 +#else +#include +#endif +/* SH with INTC2-style interrupts */ +#ifdef CONFIG_CPU_HAS_INTC2_IRQ +#if defined(CONFIG_CPU_SUBTYPE_ST40STB1) +#define INTC2_BASE 0xfe080000 #define INTC2_FIRST_IRQ 64 -#define NR_INTC2_IRQS 25 - +#define INTC2_INTREQ_OFFSET 0x20 +#define INTC2_INTMSK_OFFSET 0x40 +#define INTC2_INTMSKCLR_OFFSET 0x60 +#define NR_INTC2_IRQS 25 +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) #define INTC2_BASE 0xfe080000 -#define INTC2_INTC2MODE (INTC2_BASE+0x80) - -#define INTC2_INTPRI_OFFSET 0x00 +#define INTC2_FIRST_IRQ 48 /* INTEVT 0x800 */ #define INTC2_INTREQ_OFFSET 0x20 #define INTC2_INTMSK_OFFSET 0x40 #define INTC2_INTMSKCLR_OFFSET 0x60 +#define NR_INTC2_IRQS 64 +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#define INTC2_BASE 0xffd40000 +#define INTC2_FIRST_IRQ 22 +#define INTC2_INTMSK_OFFSET (0x38) +#define INTC2_INTMSKCLR_OFFSET (0x3c) +#define NR_INTC2_IRQS 60 +#endif + +#define INTC2_INTPRI_OFFSET 0x00 void make_intc2_irq(unsigned int irq, unsigned int ipr_offset, unsigned int ipr_shift, @@ -577,13 +587,16 @@ void make_intc2_irq(unsigned int irq, void init_IRQ_intc2(void); void intc2_add_clear_irq(int irq, int (*fn)(int)); -#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */ +#endif static inline int generic_irq_demux(int irq) { return irq; } +#ifndef __irq_demux +#define __irq_demux(irq) (irq) +#endif #define irq_canonicalize(irq) (irq) #define irq_demux(irq) __irq_demux(sh_mv.mv_irq_demux(irq))