From: Robert P. J. Day Date: Wed, 9 May 2007 05:14:03 +0000 (+0200) Subject: Fix misspellings collected by members of KJ list. X-Git-Tag: v2.6.22-rc1~147^2~20 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=beb7dd86a101263bf63a78c7c6d4da3849b35bd6;p=linux-2.6 Fix misspellings collected by members of KJ list. Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 5922e84d91..d3d3c255dd 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -228,7 +228,7 @@ Controls the kernel's behaviour when an oops or BUG is encountered. pid_max: -PID allocation wrap value. When the kenrel's next PID value +PID allocation wrap value. When the kernel's next PID value reaches this value, it wraps back to a minimum PID value. PIDs of value pid_max or larger are not allocated. diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 626b29f383..c29293befb 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -747,7 +747,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get * this to work as desired, the permormance monitor needs to - * be disabled while writting to the latches. This is a + * be disabled while writing to the latches. This is a * HW design issue. */ cbe_enable_pm(cpu); diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 4d582589fa..d8bfe31547 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1413,7 +1413,7 @@ static void ack_apic_level(unsigned int irq) /* * We must acknowledge the irq before we move it or the acknowledge will - * not propogate properly. + * not propagate properly. */ ack_APIC_irq(); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 7710a6a77d..f6ac1d316e 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1573,11 +1573,11 @@ void no_tty(void) /** - * stop_tty - propogate flow control + * stop_tty - propagate flow control * @tty: tty to stop * * Perform flow control to the driver. For PTY/TTY pairs we - * must also propogate the TIOCKPKT status. May be called + * must also propagate the TIOCKPKT status. May be called * on an already stopped device and will not re-call the driver * method. * @@ -1607,11 +1607,11 @@ void stop_tty(struct tty_struct *tty) EXPORT_SYMBOL(stop_tty); /** - * start_tty - propogate flow control + * start_tty - propagate flow control * @tty: tty to start * * Start a tty that has been stopped if at all possible. Perform - * any neccessary wakeups and propogate the TIOCPKT status. If this + * any neccessary wakeups and propagate the TIOCPKT status. If this * is the tty was previous stopped and is being started then the * driver start method is invoked and the line discipline woken. * diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c index f5d40aa3d2..f64546c6ae 100644 --- a/drivers/media/dvb/frontends/dib7000m.c +++ b/drivers/media/dvb/frontends/dib7000m.c @@ -266,7 +266,7 @@ static int dib7000m_sad_calib(struct dib7000m_state *state) { /* internal */ -// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth +// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth dib7000m_write_word(state, 929, (0 << 1) | (0 << 0)); dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096 diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 0349a4b5da..aece458cfe 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -223,7 +223,7 @@ static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx) static int dib7000p_sad_calib(struct dib7000p_state *state) { /* internal */ -// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth +// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth dib7000p_write_word(state, 73, (0 << 1) | (0 << 0)); dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096 diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 563a8319e6..54ccc6e1f9 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -70,7 +70,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr, ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len); if (ret != 2 + len) { - em28xx_warn("writting to i2c device failed (error=%i)\n", ret); + em28xx_warn("writing to i2c device failed (error=%i)\n", ret); return -EIO; } for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0; diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 2ab173d9a0..1e67720f10 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -113,7 +113,7 @@ /* RxOver overflow in Recv FIFO */ /* SipRcv received serial gap (or other condition you set) */ /* Interrupts are enabled by writing a one to the IER register */ -/* Interrupts are cleared by writting a one to the ISR register */ +/* Interrupts are cleared by writing a one to the ISR register */ /* */ /* 6. The remaining registers: 0x6 and 0x3 appear to be */ /* reserved parts of 16 or 32 bit registersthe remainder */ diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index a037b11dac..084795355b 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -115,7 +115,7 @@ isl_upload_firmware(islpci_private *priv) ISL38XX_MEMORY_WINDOW_SIZE : fw_len; u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN; - /* set the cards base address for writting the data */ + /* set the card's base address for writing the data */ isl38xx_w32_flush(device_base, reg, ISL38XX_DIR_MEM_BASE_REG); wmb(); /* be paranoid */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 67b867f837..5740d4d426 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -176,7 +176,7 @@ psa_write(struct net_device * dev, volatile u_char __iomem *verify = lp->mem + PSA_ADDR + (psaoff(0, psa_comp_number) << 1); - /* Authorize writting to PSA */ + /* Authorize writing to PSA */ hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN); while(n-- > 0) @@ -1676,7 +1676,7 @@ wv_set_frequency(u_long base, /* i/o port of the card */ fee_write(base, 0x60, dac, 2); - /* We now should verify here that the EEprom writting was ok */ + /* We now should verify here that the EEprom writing was ok */ /* ReRead the first area */ fee_read(base, 0x00, diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h index 4d1c4905c7..4b9de0093a 100644 --- a/drivers/net/wireless/wavelan_cs.p.h +++ b/drivers/net/wireless/wavelan_cs.p.h @@ -120,7 +120,7 @@ * the Wavelan itself (NCR -> AT&T -> Lucent). * * All started with Anders Klemets , - * writting a Wavelan ISA driver for the MACH microkernel. Girish + * writing a Wavelan ISA driver for the MACH microkernel. Girish * Welling had also worked on it. * Keith Moore modify this for the Pcmcia hardware. * diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c index 74b999d77b..4fab0c2381 100644 --- a/drivers/sbus/char/bpp.c +++ b/drivers/sbus/char/bpp.c @@ -156,7 +156,7 @@ static unsigned short get_pins(unsigned minor) #define BPP_ICR 0x18 #define BPP_SIZE 0x1A -/* BPP_CSR. Bits of type RW1 are cleared with writting '1'. */ +/* BPP_CSR. Bits of type RW1 are cleared with writing '1'. */ #define P_DEV_ID_MASK 0xf0000000 /* R */ #define P_DEV_ID_ZEBRA 0x40000000 #define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */ diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b675735bfb..fbc8c27d5d 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -9,7 +9,7 @@ * The device works as an standard CDC device, it has 2 interfaces, the first * one is for firmware access and the second is the serial one. * The protocol is very simply, there are two posibilities reading or writing. - * When writting the first urb must have a Header that starts with 0x20 0x29 the + * When writing the first urb must have a Header that starts with 0x20 0x29 the * next two bytes must say how much data will be sended. * When reading the process is almost equal except that the header starts with * 0x00 0x20. @@ -18,7 +18,7 @@ * buffer: The First and Second byte is used for a Header, the Third and Fourth * tells the device the amount of information the package holds. * Packages are 60 bytes long Header Stuff. - * When writting to the device the first two bytes of the header are 0x20 0x29 + * When writing to the device the first two bytes of the header are 0x20 0x29 * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange * situation, when too much data arrives to the device because it sends the data * but with out the header. I will use a simply hack to override this situation, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 18f74ac765..4807f96015 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2465,7 +2465,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r ((edge_serial->is_epic) && (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) && (regNum == MCR))) { - dbg("SendCmdWriteUartReg - Not writting to MCR Register"); + dbg("SendCmdWriteUartReg - Not writing to MCR Register"); return 0; } @@ -2473,7 +2473,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r ((edge_serial->is_epic) && (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) && (regNum == LCR))) { - dbg ("SendCmdWriteUartReg - Not writting to LCR Register"); + dbg ("SendCmdWriteUartReg - Not writing to LCR Register"); return 0; } diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c index a5690a5f29..9445cdb759 100644 --- a/drivers/video/matrox/matroxfb_Ti3026.c +++ b/drivers/video/matrox/matroxfb_Ti3026.c @@ -72,7 +72,7 @@ * (c) 1998 Gerd Knorr * * (following author is not in any relation with this code, but his ideas - * were used when writting this driver) + * were used when writing this driver) * * FreeVBE/AF (Matrox), "Shawn Hargreaves" * diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/matrox/matroxfb_accel.c index a5c825d994..c57aaadf41 100644 --- a/drivers/video/matrox/matroxfb_accel.c +++ b/drivers/video/matrox/matroxfb_accel.c @@ -70,7 +70,7 @@ * (c) 1998 Gerd Knorr * * (following author is not in any relation with this code, but his ideas - * were used when writting this driver) + * were used when writing this driver) * * FreeVBE/AF (Matrox), "Shawn Hargreaves" * diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index cb2aa402dd..c8559a756b 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -93,7 +93,7 @@ * (c) 1998 Gerd Knorr * * (following author is not in any relation with this code, but his ideas - * were used when writting this driver) + * were used when writing this driver) * * FreeVBE/AF (Matrox), "Shawn Hargreaves" * diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c index 18886b629c..5948e54b9e 100644 --- a/drivers/video/matrox/matroxfb_misc.c +++ b/drivers/video/matrox/matroxfb_misc.c @@ -78,7 +78,7 @@ * (c) 1998 Gerd Knorr * * (following author is not in any relation with this code, but his ideas - * were used when writting this driver) + * were used when writing this driver) * * FreeVBE/AF (Matrox), "Shawn Hargreaves" * diff --git a/fs/direct-io.c b/fs/direct-io.c index d9d0833444..1e88d8d1d2 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -439,7 +439,7 @@ static int dio_bio_complete(struct dio *dio, struct bio *bio) * Wait on and process all in-flight BIOs. This must only be called once * all bios have been issued so that the refcount can only decrease. * This just waits for all bios to make it through dio_bio_complete. IO - * errors are propogated through dio->io_error and should be propogated via + * errors are propagated through dio->io_error and should be propagated via * dio_complete(). */ static void dio_await_completion(struct dio *dio) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index e073fd86cf..f25086aeef 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -1110,7 +1110,7 @@ static int flush_commit_list(struct super_block *s, if (!barrier) { /* If there was a write error in the journal - we can't commit * this transaction - it will be invalid and, if successful, - * will just end up propogating the write error out to + * will just end up propagating the write error out to * the file system. */ if (likely(!retval && !reiserfs_is_journal_aborted (journal))) { if (buffer_dirty(jl->j_commit_bh)) @@ -1125,7 +1125,7 @@ static int flush_commit_list(struct super_block *s, /* If there was a write error in the journal - we can't commit this * transaction - it will be invalid and, if successful, will just end - * up propogating the write error out to the filesystem. */ + * up propagating the write error out to the filesystem. */ if (unlikely(!buffer_uptodate(jl->j_commit_bh))) { #ifdef CONFIG_REISERFS_CHECK reiserfs_warning(s, "journal-615: buffer write failed"); diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h index 78339319ba..cd8a9641bd 100644 --- a/include/asm-generic/bitops/atomic.h +++ b/include/asm-generic/bitops/atomic.h @@ -58,7 +58,7 @@ extern raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned; * if you do not require the atomic guarantees. * * Note: there are no guarantees that this function will not be reordered - * on non x86 architectures, so if you are writting portable code, + * on non x86 architectures, so if you are writing portable code, * make sure not to rely on its reordering guarantees. * * Note that @nr may be almost arbitrarily large; this function is not diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h index 273b506293..a20fe9822f 100644 --- a/include/asm-i386/bitops.h +++ b/include/asm-i386/bitops.h @@ -27,7 +27,7 @@ * if you do not require the atomic guarantees. * * Note: there are no guarantees that this function will not be reordered - * on non x86 architectures, so if you are writting portable code, + * on non x86 architectures, so if you are writing portable code, * make sure not to rely on its reordering guarantees. * * Note that @nr may be almost arbitrarily large; this function is not diff --git a/include/asm-i386/boot.h b/include/asm-i386/boot.h index e7686d0a84..bd024ab4fe 100644 --- a/include/asm-i386/boot.h +++ b/include/asm-i386/boot.h @@ -12,7 +12,7 @@ #define EXTENDED_VGA 0xfffe /* 80x50 mode */ #define ASK_VGA 0xfffd /* ask for it at bootup */ -/* Physical address where kenrel should be loaded. */ +/* Physical address where kernel should be loaded. */ #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) diff --git a/include/asm-i386/sync_bitops.h b/include/asm-i386/sync_bitops.h index 7d72351bea..cbce08a2d1 100644 --- a/include/asm-i386/sync_bitops.h +++ b/include/asm-i386/sync_bitops.h @@ -24,7 +24,7 @@ * if you do not require the atomic guarantees. * * Note: there are no guarantees that this function will not be reordered - * on non x86 architectures, so if you are writting portable code, + * on non-x86 architectures, so if you are writing portable code, * make sure not to rely on its reordering guarantees. * * Note that @nr may be almost arbitrarily large; this function is not diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h index 06cdece358..f62f5c9abb 100644 --- a/include/asm-m32r/system.h +++ b/include/asm-m32r/system.h @@ -136,7 +136,7 @@ extern void __xchg_called_with_bad_pointer(void); "add3 "reg0", "addr", #0x2000; \n\t" \ "ld "reg0", @"reg0"; \n\t" \ "unlock "reg0", @"reg1"; \n\t" - /* FIXME: This workaround code cannot handle kenrel modules + /* FIXME: This workaround code cannot handle kernel modules * correctly under SMP environment. */ #else /* CONFIG_CHIP_M32700_TS1 */ diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index c7c945baf1..dbf834f4da 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -254,7 +254,7 @@ extern void free_init_pages(const char *what, extern char arcs_cmdline[CL_SIZE]; /* - * Registers a0, a1, a3 and a4 as passed to the kenrel entry by firmware + * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware */ extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; diff --git a/include/linux/mount.h b/include/linux/mount.h index dab69afee2..6d3047d8c9 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -33,7 +33,7 @@ struct mnt_namespace; #define MNT_SHARED 0x1000 /* if the vfsmount is a shared mount */ #define MNT_UNBINDABLE 0x2000 /* if the vfsmount is a unbindable mount */ -#define MNT_PNODE_MASK 0x3000 /* propogation flag mask */ +#define MNT_PNODE_MASK 0x3000 /* propagation flag mask */ struct vfsmount { struct list_head mnt_hash; diff --git a/sound/pci/ice1712/delta.h b/sound/pci/ice1712/delta.h index e65d669af6..e47861ccd6 100644 --- a/sound/pci/ice1712/delta.h +++ b/sound/pci/ice1712/delta.h @@ -63,7 +63,7 @@ extern const struct snd_ice1712_card_info snd_ice1712_delta_cards[]; /* look to CS8414 datasheet */ #define ICE1712_DELTA_SPDIF_OUT_STAT_CLOCK 0x04 /* S/PDIF output status clock */ - /* (writting on rising edge - 0->1) */ + /* (writing on rising edge - 0->1) */ /* all except Delta44 */ /* look to CS8404A datasheet */ #define ICE1712_DELTA_SPDIF_OUT_STAT_DATA 0x08 @@ -100,7 +100,7 @@ extern const struct snd_ice1712_card_info snd_ice1712_delta_cards[]; /* AKM4524 serial data */ #define ICE1712_DELTA_CODEC_SERIAL_CLOCK 0x20 /* AKM4524 serial clock */ - /* (writting on rising edge - 0->1 */ + /* (writing on rising edge - 0->1 */ #define ICE1712_DELTA_CODEC_CHIP_A 0x40 #define ICE1712_DELTA_CODEC_CHIP_B 0x80 /* 1 - select chip A or B */ diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 25a2a73330..e07085a7cf 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -673,7 +673,7 @@ static s32 *dbri_cmdlock(struct snd_dbri * dbri, int len) } /* - * Send prepared cmd string. It works by writting a JUMP cmd into + * Send prepared cmd string. It works by writing a JUMP cmd into * the last WAIT cmd and force DBRI to reread the cmd. * The JUMP cmd points to the new cmd string. * It also releases the cmdlock spinlock.