From: Kenji Kaneshige Date: Fri, 25 Nov 2005 03:28:53 +0000 (+0900) Subject: [PATCH] shpchp: fix improper wait for command completion X-Git-Tag: v2.6.16-rc1~654^2~24 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=bd62e271401c5ebf33a0dd24d89baf706f213251;p=linux-2.6 [PATCH] shpchp: fix improper wait for command completion Current SHPCHP driver uses msleep_interruptible() function to wait for a command completion event. But I think this would cause an unnecessary long wait until timeout, if command completion interrupt came before task state was changed to TASK_INTERRUPTIBLE. This patch fixes this issue. With this patch, command completion becomes faster as follows: o Without this patch # time echo 1 > power real 0m4.708s user 0m0.000s sys 0m0.524s o With this patch # time echo 1 > power real 0m2.221s user 0m0.000s sys 0m0.532s Signed-off-by: Kenji Kaneshige Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 55b0cd15f3..ce0e9b6ce8 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -101,6 +101,7 @@ struct controller { u32 cap_offset; unsigned long mmio_base; unsigned long mmio_size; + volatile int cmd_busy; }; struct hotplug_params { diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 58619359ad..25ccb0e475 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -248,7 +248,6 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, up(&ctrl->crit_sect); return WRONG_BUS_FREQUENCY; } - wait_for_ctrl_irq (ctrl); if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n", @@ -330,9 +329,6 @@ static int board_added(struct slot *p_slot) up(&ctrl->crit_sect); return -1; } - - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); rc = p_slot->hpc_ops->check_cmd_status(ctrl); if (rc) { @@ -352,7 +348,6 @@ static int board_added(struct slot *p_slot) up(&ctrl->crit_sect); return WRONG_BUS_FREQUENCY; } - wait_for_ctrl_irq (ctrl); if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n", @@ -367,7 +362,6 @@ static int board_added(struct slot *p_slot) up(&ctrl->crit_sect); return rc; } - wait_for_ctrl_irq (ctrl); if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc); @@ -494,7 +488,6 @@ static int board_added(struct slot *p_slot) up(&ctrl->crit_sect); return rc; } - wait_for_ctrl_irq (ctrl); if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc); @@ -532,9 +525,6 @@ static int board_added(struct slot *p_slot) p_slot->hpc_ops->green_led_on(p_slot); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - /* Done with exclusive hardware access */ up(&ctrl->crit_sect); @@ -552,8 +542,6 @@ err_exit: up(&ctrl->crit_sect); return rc; } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); rc = p_slot->hpc_ops->check_cmd_status(ctrl); if (rc) { @@ -603,8 +591,6 @@ static int remove_board(struct slot *p_slot) up(&ctrl->crit_sect); return rc; } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); rc = p_slot->hpc_ops->check_cmd_status(ctrl); if (rc) { @@ -621,8 +607,6 @@ static int remove_board(struct slot *p_slot) up(&ctrl->crit_sect); return rc; } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); @@ -676,9 +660,6 @@ static void shpchp_pushbutton_thread (unsigned long slot) p_slot->hpc_ops->green_led_off(p_slot); - /* Wait for the command to complete */ - wait_for_ctrl_irq (p_slot->ctrl); - /* Done with exclusive hardware access */ up(&p_slot->ctrl->crit_sect); } @@ -790,14 +771,9 @@ static void interrupt_event_handler(struct controller *ctrl) down(&ctrl->crit_sect); p_slot->hpc_ops->green_led_on(p_slot); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); p_slot->hpc_ops->set_attention_status(p_slot, 0); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - /* Done with exclusive hardware access */ up(&ctrl->crit_sect); break; @@ -806,12 +782,8 @@ static void interrupt_event_handler(struct controller *ctrl) down(&ctrl->crit_sect); p_slot->hpc_ops->green_led_off(p_slot); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); p_slot->hpc_ops->set_attention_status(p_slot, 0); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); @@ -845,14 +817,9 @@ static void interrupt_event_handler(struct controller *ctrl) /* blink green LED and turn off amber */ p_slot->hpc_ops->green_led_blink(p_slot); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); p_slot->hpc_ops->set_attention_status(p_slot, 0); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - /* Done with exclusive hardware access */ up(&ctrl->crit_sect); @@ -870,12 +837,8 @@ static void interrupt_event_handler(struct controller *ctrl) down(&ctrl->crit_sect); p_slot->hpc_ops->set_attention_status(p_slot, 1); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); p_slot->hpc_ops->green_led_off(p_slot); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index f25e116450..b4226ff3a8 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -275,6 +275,25 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds) return; } +static inline int shpc_wait_cmd(struct controller *ctrl) +{ + int retval = 0; + unsigned int timeout_msec = shpchp_poll_mode ? 2000 : 1000; + unsigned long timeout = msecs_to_jiffies(timeout_msec); + int rc = wait_event_interruptible_timeout(ctrl->queue, + !ctrl->cmd_busy, timeout); + if (!rc) { + retval = -EIO; + err("Command not completed in %d msec\n", timeout_msec); + } else if (rc < 0) { + retval = -EINTR; + info("Command was interrupted by a signal\n"); + } + ctrl->cmd_busy = 0; + + return retval; +} + static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) { struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; @@ -314,8 +333,14 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) /* To make sure the Controller Busy bit is 0 before we send out the * command. */ + slot->ctrl->cmd_busy = 1; writew(temp_word, php_ctlr->creg + CMD); + /* + * Wait for command completion. + */ + retval = shpc_wait_cmd(slot->ctrl); + DBG_LEAVE_ROUTINE return retval; } @@ -1064,6 +1089,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); temp_dword &= 0xfffdffff; writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); + ctrl->cmd_busy = 0; wake_up_interruptible(&ctrl->queue); }