From: Grant Likely Date: Mon, 27 Nov 2006 21:21:02 +0000 (-0700) Subject: [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver X-Git-Tag: v2.6.20-rc1~34^2~40^2~8^2~3 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b9272dfdfe6b13120144eabf79d562d9a29ad5ce;p=linux-2.6 [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver Needed to support mpc52xx boards in arch/powerpc. This patch retains the platform_bus support when compiling for arch/ppc, but uses the of_platform bindings for arch/powerpc. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 8e24133166..6dd579ed97 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -16,7 +16,9 @@ * Some of the code has been inspired/copied from the 2.4 code written * by Dale Farnsworth . * - * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely + * Copyright (C) 2004-2006 Sylvain Munaut * Copyright (C) 2003 MontaVista, Software, Inc. * * This file is licensed under the terms of the GNU General Public License @@ -42,7 +44,24 @@ * will be mapped to. */ -#include +/* OF Platform device Usage : + * + * This driver is only used for PSCs configured in uart mode. The device + * tree will have a node for each PSC in uart mode w/ device_type = "serial" + * and "mpc52xx-psc-uart" in the compatible string + * + * By default, PSC devices are enumerated in the order they are found. However + * a particular PSC number can be forces by adding 'device_no = ' + * to the device node. + * + * The driver init all necessary registers to place the PSC in uart mode without + * DCD. However, the pin multiplexing aren't changed and should be set either + * by the bootloader or in the platform init code. + */ + +#undef DEBUG + +#include #include #include #include @@ -52,6 +71,12 @@ #include #include +#if defined(CONFIG_PPC_MERGE) +#include +#else +#include +#endif + #include #include @@ -78,6 +103,12 @@ static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; * it's cleared, then a memset(...,0,...) should be added to * the console_init */ +#if defined(CONFIG_PPC_MERGE) +/* lookup table for matching device nodes to index numbers */ +static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; + +static void mpc52xx_uart_of_enumerate(void); +#endif #define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) @@ -94,6 +125,14 @@ static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id); #define uart_console(port) (0) #endif +#if defined(CONFIG_PPC_MERGE) +static struct of_device_id mpc52xx_uart_of_match[] = { + { .type = "serial", .compatible = "mpc52xx-psc-uart", }, + { .type = "serial", .compatible = "mpc5200-psc", }, /* Efika only! */ + {}, +}; +#endif + /* ======================================================================== */ /* UART operations */ @@ -330,7 +369,7 @@ mpc52xx_uart_release_port(struct uart_port *port) port->membase = NULL; } - release_mem_region(port->mapbase, MPC52xx_PSC_SIZE); + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); } static int @@ -339,12 +378,13 @@ mpc52xx_uart_request_port(struct uart_port *port) int err; if (port->flags & UPF_IOREMAP) /* Need to remap ? */ - port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE); + port->membase = ioremap(port->mapbase, + sizeof(struct mpc52xx_psc)); if (!port->membase) return -EINVAL; - err = request_mem_region(port->mapbase, MPC52xx_PSC_SIZE, + err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; if (err && (port->flags & UPF_IOREMAP)) { @@ -561,13 +601,18 @@ mpc52xx_console_get_options(struct uart_port *port, struct mpc52xx_psc __iomem *psc = PSC(port); unsigned char mr1; + pr_debug("mpc52xx_console_get_options(port=%p)\n", port); + /* Read the mode registers */ out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); mr1 = in_8(&psc->mode); /* CT{U,L}R are write-only ! */ - *baud = __res.bi_baudrate ? - __res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; +#if !defined(CONFIG_PPC_MERGE) + if (__res.bi_baudrate) + *baud = __res.bi_baudrate; +#endif /* Parse them */ switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { @@ -620,6 +665,7 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count) out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); } +#if !defined(CONFIG_PPC_MERGE) static int __init mpc52xx_console_setup(struct console *co, char *options) { @@ -654,6 +700,78 @@ mpc52xx_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } +#else + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct device_node *np = mpc52xx_uart_nodes[co->index]; + unsigned int ipb_freq; + struct resource res; + int ret; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) { + pr_debug("PSC%x out of range\n", co->index); + return -EINVAL; + } + + if (!np) { + pr_debug("PSC%x not found in device tree\n", co->index); + return -EINVAL; + } + + pr_debug("Console on ttyPSC%x is %s\n", + co->index, mpc52xx_uart_nodes[co->index]->full_name); + + /* Fetch register locations */ + if ((ret = of_address_to_resource(np, 0, &res)) != 0) { + pr_debug("Could not get resources for PSC%x\n", co->index); + return ret; + } + + /* Search for bus-frequency property in this node or a parent */ + if ((ipb_freq = mpc52xx_find_ipb_freq(np)) == 0) { + pr_debug("Could not find IPB bus frequency!\n"); + return -EINVAL; + } + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = ipb_freq / 2; + port->ops = &mpc52xx_uart_ops; + port->mapbase = res.start; + port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); + port->irq = irq_of_parse_and_map(np, 0); + + if (port->membase == NULL) + return -EINVAL; + + pr_debug("mpc52xx-psc uart at %lx, mapped to %p, irq=%x, freq=%i\n", + port->mapbase, port->membase, port->irq, port->uartclk); + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", + baud, bits, parity, flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} +#endif /* defined(CONFIG_PPC_MERGE) */ + static struct uart_driver mpc52xx_uart_driver; @@ -671,6 +789,7 @@ static struct console mpc52xx_console = { static int __init mpc52xx_console_init(void) { + mpc52xx_uart_of_enumerate(); register_console(&mpc52xx_console); return 0; } @@ -698,6 +817,7 @@ static struct uart_driver mpc52xx_uart_driver = { }; +#if !defined(CONFIG_PPC_MERGE) /* ======================================================================== */ /* Platform Driver */ /* ======================================================================== */ @@ -721,8 +841,6 @@ mpc52xx_uart_probe(struct platform_device *dev) /* Init the port structure */ port = &mpc52xx_uart_ports[idx]; - memset(port, 0x00, sizeof(struct uart_port)); - spin_lock_init(&port->lock); port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ port->fifosize = 512; @@ -731,6 +849,7 @@ mpc52xx_uart_probe(struct platform_device *dev) ( uart_console(port) ? 0 : UPF_IOREMAP ); port->line = idx; port->ops = &mpc52xx_uart_ops; + port->dev = &dev->dev; /* Search for IRQ and mapbase */ for (i=0 ; inum_resources ; i++, res++) { @@ -787,6 +906,7 @@ mpc52xx_uart_resume(struct platform_device *dev) } #endif + static struct platform_driver mpc52xx_uart_platform_driver = { .probe = mpc52xx_uart_probe, .remove = mpc52xx_uart_remove, @@ -798,6 +918,184 @@ static struct platform_driver mpc52xx_uart_platform_driver = { .name = "mpc52xx-psc", }, }; +#endif /* !defined(CONFIG_PPC_MERGE) */ + + +#if defined(CONFIG_PPC_MERGE) +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static int __devinit +mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) +{ + int idx = -1; + unsigned int ipb_freq; + struct uart_port *port = NULL; + struct resource res; + int ret; + + dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); + + /* Check validity & presence */ + for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) + if (mpc52xx_uart_nodes[idx] == op->node) + break; + if (idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + pr_debug("Found %s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[idx]->full_name, idx); + + /* Search for bus-frequency property in this node or a parent */ + if ((ipb_freq = mpc52xx_find_ipb_freq(op->node)) == 0) { + dev_dbg(&op->dev, "Could not find IPB bus frequency!\n"); + return -EINVAL; + } + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + spin_lock_init(&port->lock); + port->uartclk = ipb_freq / 2; + port->fifosize = 512; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + ( uart_console(port) ? 0 : UPF_IOREMAP ); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + port->dev = &op->dev; + + /* Search for IRQ and mapbase */ + if ((ret = of_address_to_resource(op->node, 0, &res)) != 0) + return ret; + + port->mapbase = res.start; + port->irq = irq_of_parse_and_map(op->node, 0); + + dev_dbg(&op->dev, "mpc52xx-psc uart at %lx, irq=%x, freq=%i\n", + port->mapbase, port->irq, port->uartclk); + + if ((port->irq==NO_IRQ) || !port->mapbase) { + printk(KERN_ERR "Could not allocate resources for PSC\n"); + return -EINVAL; + } + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (!ret) + dev_set_drvdata(&op->dev, (void*)port); + + return ret; +} + +static int +mpc52xx_uart_of_remove(struct of_device *op) +{ + struct uart_port *port = dev_get_drvdata(&op->dev); + dev_set_drvdata(&op->dev, NULL); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); + + if (port) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_of_resume(struct of_device *op) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); + + if (port) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static void +mpc52xx_uart_of_assign(struct device_node *np, int idx) +{ + int free_idx = -1; + int i; + + /* Find the first free node */ + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i] == NULL) { + free_idx = i; + break; + } + } + + if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM)) + idx = free_idx; + + if (idx < 0) + return; /* No free slot; abort */ + + /* If the slot is already occupied, then swap slots */ + if (mpc52xx_uart_nodes[idx] && (free_idx != -1)) + mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx]; + mpc52xx_uart_nodes[i] = np; +} + +static void +mpc52xx_uart_of_enumerate(void) +{ + static int enum_done = 0; + struct device_node *np; + const unsigned int *devno; + int i; + + if (enum_done) + return; + + for_each_node_by_type(np, "serial") { + if (!of_match_node(mpc52xx_uart_of_match, np)) + continue; + + /* Is a particular device number requested? */ + devno = get_property(np, "device_no", NULL); + mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1); + } + + enum_done = 1; + + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i]) + pr_debug("%s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[i]->full_name, i); + } +} + +MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); + +static struct of_platform_driver mpc52xx_uart_of_driver = { + .owner = THIS_MODULE, + .name = "mpc52xx-psc-uart", + .match_table = mpc52xx_uart_of_match, + .probe = mpc52xx_uart_of_probe, + .remove = mpc52xx_uart_of_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_of_suspend, + .resume = mpc52xx_uart_of_resume, +#endif + .driver = { + .name = "mpc52xx-psc-uart", + }, +}; +#endif /* defined(CONFIG_PPC_MERGE) */ /* ======================================================================== */ @@ -809,22 +1107,45 @@ mpc52xx_uart_init(void) { int ret; - printk(KERN_INFO "Serial: MPC52xx PSC driver\n"); + printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); - ret = uart_register_driver(&mpc52xx_uart_driver); - if (ret == 0) { - ret = platform_driver_register(&mpc52xx_uart_platform_driver); - if (ret) - uart_unregister_driver(&mpc52xx_uart_driver); + if ((ret = uart_register_driver(&mpc52xx_uart_driver)) != 0) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; } - return ret; +#if defined(CONFIG_PPC_MERGE) + mpc52xx_uart_of_enumerate(); + + ret = of_register_platform_driver(&mpc52xx_uart_of_driver); + if (ret) { + printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; + } +#else + ret = platform_driver_register(&mpc52xx_uart_platform_driver); + if (ret) { + printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; + } +#endif + + return 0; } static void __exit mpc52xx_uart_exit(void) { +#if defined(CONFIG_PPC_MERGE) + of_unregister_platform_driver(&mpc52xx_uart_of_driver); +#else platform_driver_unregister(&mpc52xx_uart_platform_driver); +#endif uart_unregister_driver(&mpc52xx_uart_driver); }