From: Michael Chan Date: Sun, 8 Jul 2007 05:51:03 +0000 (-0700) Subject: [BNX2]: Reduce spurious INTA interrupts. X-Git-Tag: v2.6.23-rc1~1109^2~41 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b8a7ce7bedb2134acb731e08e588ad92087a40ff;p=linux-2.6 [BNX2]: Reduce spurious INTA interrupts. Spurious interrupts are often encountered especially on systems using the 8259 PIC mode. This is because the I/O write to deassert the interrupt is posted and won't get to the chip immediately. As a result, the IRQ may remain asserted after the IRQ handler exits, causing spurious interrupts. Add read back to flush the I/O write to deassert the IRQ immediately. We also store the last_status_idx immediately in the IRQ handler to help detect whether the interrupt is ours or not when the IRQ is entered again before ->poll gets called. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 439f4827ad..a806a8edec 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -2547,6 +2547,7 @@ bnx2_interrupt(int irq, void *dev_instance) { struct net_device *dev = dev_instance; struct bnx2 *bp = netdev_priv(dev); + struct status_block *sblk = bp->status_blk; /* When using INTx, it is possible for the interrupt to arrive * at the CPU before the status block posted prior to the @@ -2554,7 +2555,7 @@ bnx2_interrupt(int irq, void *dev_instance) * When using MSI, the MSI message will always complete after * the status block write. */ - if ((bp->status_blk->status_idx == bp->last_status_idx) && + if ((sblk->status_idx == bp->last_status_idx) && (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) & BNX2_PCICFG_MISC_STATUS_INTA_VALUE)) return IRQ_NONE; @@ -2563,11 +2564,19 @@ bnx2_interrupt(int irq, void *dev_instance) BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + /* Read back to deassert IRQ immediately to avoid too many + * spurious interrupts. + */ + REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD); + /* Return here if interrupt is shared and is disabled. */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) return IRQ_HANDLED; - netif_rx_schedule(dev); + if (netif_rx_schedule_prep(dev)) { + bp->last_status_idx = sblk->status_idx; + __netif_rx_schedule(dev); + } return IRQ_HANDLED; }