From: Alan Stern Date: Fri, 11 May 2007 14:19:04 +0000 (-0400) Subject: USB: remove short initial timeout for device descriptor fetch X-Git-Tag: v2.6.22-rc3~91^2~12 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b89ee19ae6c0b5a0d9facca780b53959fbadd123;p=linux-2.6 USB: remove short initial timeout for device descriptor fetch This patch (as905) removes a micro-optimization from the hub port initialization code. Previously we had been using a short timeout on the first attempt the read the device descriptor; now we will use the standard timeout length. It's not clear that the short timeout ever provided any benefit. And now we know of one case where it actually hurts: The device can't meet the short timeout and then it gets terminally confused. This fixes Bugzilla #8444. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f6b74a678d..6a6e4f8c69 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2201,14 +2201,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, continue; } - /* Use a short timeout the first time through, - * so that recalcitrant full-speed devices with - * 8- or 16-byte ep0-maxpackets won't slow things - * down tremendously by NAKing the unexpectedly - * early status stage. Also, retry on all errors; - * some devices are flakey. - * 255 is for WUSB devices, we actually need to use 512. - * WUSB1.0[4.8.1]. + /* Retry on all errors; some devices are flakey. + * 255 is for WUSB devices, we actually need to use + * 512 (WUSB1.0[4.8.1]). */ for (j = 0; j < 3; ++j) { buf->bMaxPacketSize0 = 0; @@ -2216,7 +2211,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, GET_DESCRIPTOR_BUFSIZE, - (i ? USB_CTRL_GET_TIMEOUT : 1000)); + USB_CTRL_GET_TIMEOUT); switch (buf->bMaxPacketSize0) { case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType ==