From: Jon Loeliger Date: Sat, 17 Jun 2006 22:52:48 +0000 (-0500) Subject: [POWERPC] Add mpc8641hpcn PCI/PCI-Express platform files. X-Git-Tag: v2.6.18-rc1~1081^2~225^2~32 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b809b3e86f39651475b30ceb1caf535071534d4d;p=linux-2.6 [POWERPC] Add mpc8641hpcn PCI/PCI-Express platform files. Signed-off-by: Xianghua Xiao Signed-off-by: Wei Zhang Signed-off-by: Haiying Wang Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c b/arch/powerpc/platforms/86xx/mpc86xx_pcie.c new file mode 100644 index 0000000000..a2f4f73021 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx_pcie.c @@ -0,0 +1,173 @@ +/* + * Support for indirect PCI bridges. + * + * Copyright (C) 1998 Gabriel Paubert. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * "Temporary" MPC8548 Errata file - + * The standard indirect_pci code should work with future silicon versions. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "mpc86xx.h" + +#define PCI_CFG_OUT out_be32 + +/* ERRATA PCI-Ex 14 PCIE Controller timeout */ +#define PCIE_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff) + + +static int +indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + volatile void __iomem *cfg_data; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Possible artifact of CDCpp50937 needs further investigation */ + if (devfn != 0x0 && bus->number == 0xff) + return PCIBIOS_DEVICE_NOT_FOUND; + + PCIE_FIX; + if (bus->number == 0xff) { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000000 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } else { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000001 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */ + cfg_data = hose->cfg_data; + PCIE_FIX; + temp = in_le32(cfg_data); + switch (len) { + case 1: + *val = (temp >> (((offset & 3))*8)) & 0xff; + break; + case 2: + *val = (temp >> (((offset & 3))*8)) & 0xffff; + break; + default: + *val = temp; + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int +indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + volatile void __iomem *cfg_data; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Possible artifact of CDCpp50937 needs further investigation */ + if (devfn != 0x0 && bus->number == 0xff) + return PCIBIOS_DEVICE_NOT_FOUND; + + PCIE_FIX; + if (bus->number == 0xff) { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000000 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } else { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000001 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */ + cfg_data = hose->cfg_data; + switch (len) { + case 1: + PCIE_FIX; + temp = in_le32(cfg_data); + temp = (temp & ~(0xff << ((offset & 3) * 8))) | + (val << ((offset & 3) * 8)); + PCIE_FIX; + out_le32(cfg_data, temp); + break; + case 2: + PCIE_FIX; + temp = in_le32(cfg_data); + temp = (temp & ~(0xffff << ((offset & 3) * 8))); + temp |= (val << ((offset & 3) * 8)) ; + PCIE_FIX; + out_le32(cfg_data, temp); + break; + default: + PCIE_FIX; + out_le32(cfg_data, val); + break; + } + PCIE_FIX; + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops indirect_pcie_ops = { + indirect_read_config_pcie, + indirect_write_config_pcie +}; + +void __init +setup_indirect_pcie_nomap(struct pci_controller* hose, void __iomem * cfg_addr, + void __iomem * cfg_data) +{ + hose->cfg_addr = cfg_addr; + hose->cfg_data = cfg_data; + hose->ops = &indirect_pcie_ops; +} + +void __init +setup_indirect_pcie(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data) +{ + unsigned long base = cfg_addr & PAGE_MASK; + void __iomem *mbase, *addr, *data; + + mbase = ioremap(base, PAGE_SIZE); + addr = mbase + (cfg_addr & ~PAGE_MASK); + if ((cfg_data & PAGE_MASK) != base) + mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); + data = mbase + (cfg_data & ~PAGE_MASK); + setup_indirect_pcie_nomap(hose, addr, data); +} diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c new file mode 100644 index 0000000000..5180df7c75 --- /dev/null +++ b/arch/powerpc/platforms/86xx/pci.c @@ -0,0 +1,325 @@ +/* + * MPC86XX pci setup code + * + * Recode: ZHANG WEI + * Initial author: Xianghua Xiao + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "mpc86xx.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#else +#define DBG(fmt, args...) +#endif + +struct pcie_outbound_window_regs { + uint pexotar; /* 0x.0 - PCI Express outbound translation address register */ + uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */ + uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */ + char res1[4]; + uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */ + char res2[12]; +}; + +struct pcie_inbound_window_regs { + uint pexitar; /* 0x.0 - PCI Express inbound translation address register */ + char res1[4]; + uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */ + uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */ + uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */ + char res2[12]; +}; + +static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc) +{ + volatile struct ccsr_pex *pcie; + volatile struct pcie_outbound_window_regs *pcieow; + volatile struct pcie_inbound_window_regs *pcieiw; + int i = 0; + + DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start, + rsrc->end - rsrc->start + 1); + pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); + + /* Disable all windows (except pexowar0 since its ignored) */ + pcie->pexowar1 = 0; + pcie->pexowar2 = 0; + pcie->pexowar3 = 0; + pcie->pexowar4 = 0; + pcie->pexiwar1 = 0; + pcie->pexiwar2 = 0; + pcie->pexiwar3 = 0; + + pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1; + pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1; + + /* Setup outbound MEM window */ + for(i = 0; i < 3; i++) + if (hose->mem_resources[i].flags & IORESOURCE_MEM){ + DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n", + hose->mem_resources[i].start, + hose->mem_resources[i].end + - hose->mem_resources[i].start + 1); + pcieow->pexotar = (hose->mem_resources[i].start) >> 12 + & 0x000fffff; + pcieow->pexotear = 0; + pcieow->pexowbar = (hose->mem_resources[i].start) >> 12 + & 0x000fffff; + /* Enable, Mem R/W */ + pcieow->pexowar = 0x80044000 | + (__ilog2(hose->mem_resources[i].end + - hose->mem_resources[i].start + 1) + - 1); + pcieow++; + } + + /* Setup outbound IO window */ + if (hose->io_resource.flags & IORESOURCE_IO){ + DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", + hose->io_resource.start, + hose->io_resource.end - hose->io_resource.start + 1, + hose->io_base_phys); + pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff; + pcieow->pexotear = 0; + pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff; + /* Enable, IO R/W */ + pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end + - hose->io_resource.start + 1) - 1); + } + + /* Setup 2G inbound Memory Window @ 0 */ + pcieiw->pexitar = 0x00000000; + pcieiw->pexiwbar = 0x00000000; + /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */ + pcieiw->pexiwar = 0xa0f5501e; +} + +static void __init +mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) +{ + volatile struct ccsr_pex *pcie; + u16 cmd; + unsigned int temps; + + DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n", + pcie_offset, pcie_size); + + pcie = ioremap(pcie_offset, pcie_size); + + early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY + | PCI_COMMAND_IO; + early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); + + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); + + /* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */ + early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps); + temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16); + early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps); +} + +int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int has_address = 0; + int primary = 0; + + DBG("Adding PCIE host bridge %s\n", dev->full_name); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->set_cfg_type = 1; + + /* last_busno = 0xfe cause by MPC8641 PCIE bug */ + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xfe; + + setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4); + + /* Setup the PCIE host controller. */ + mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1); + + if ((rsrc.start & 0xfffff) == 0x8000) + primary = 1; + + printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Setup PEX window registers */ + setup_pcie_atmu(hose, &rsrc); + + return 0; +} + +static void __devinit quirk_ali1575(struct pci_dev *dev) +{ + unsigned short temp; + + /* + * ALI1575 interrupts route table setup: + * + * IRQ pin IRQ# + * PIRQA ---- 3 + * PIRQB ---- 4 + * PIRQC ---- 5 + * PIRQD ---- 6 + * PIRQE ---- 9 + * PIRQF ---- 10 + * PIRQG ---- 11 + * PIRQH ---- 12 + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + pci_write_config_dword(dev, 0x48, 0xb9317542); + + /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x86, 0x0c); + + /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x87, 0x0d); + + /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ + pci_write_config_byte(dev, 0x88, 0x0f); + + /* USB 2.0 controller, interrupt: PIRQ7 */ + pci_write_config_byte(dev, 0x74, 0x06); + + /* Audio controller, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x8a, 0x0c); + + /* Modem controller, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x8b, 0x0d); + + /* HD audio controller, interrupt: PIRQG */ + pci_write_config_byte(dev, 0x8c, 0x0e); + + /* Serial ATA interrupt: PIRQD */ + pci_write_config_byte(dev, 0x8d, 0x0b); + + /* SMB interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8e, 0x0f); + + /* PMU ACPI SCI interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8f, 0x0f); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x3d); + pci_write_config_byte(dev, 0x75, 0x0f); + + /* Set IRQ14 and IRQ15 to legacy IRQs */ + pci_read_config_word(dev, 0x46, &temp); + temp |= 0xc000; + pci_write_config_word(dev, 0x46, temp); + + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); +} + +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + + pci_read_config_byte(dev,0x83,&c); + c |= 0x80; + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x0a, 0x06); + + pci_read_config_byte(dev,0x83,&c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); + + pci_read_config_byte(dev,0x84,&c); + c |= 0x01; + pci_write_config_byte(dev, 0x84, c); +} + +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + pci_write_config_word(dev, 0x04, 0x0405); + pci_read_config_word(dev, 0x4a, &temp); + temp |= 0x1000; + pci_write_config_word(dev, 0x4a, temp); +} + +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + pci_write_config_word(dev, 0x04, 0x0007); + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x7c, temp); + dev->class |= 0x1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);