From: Daniel Drake Date: Fri, 30 Sep 2005 11:49:36 +0000 (+0100) Subject: [PATCH] usb-storage: Some minor shuttle_usbat cleanups X-Git-Tag: v2.6.15-rc1~731^2~16^2~1^2~55 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b7b1e65588b8576c66a429a2623c91504efcf751;p=linux-2.6 [PATCH] usb-storage: Some minor shuttle_usbat cleanups A while ago, Matthew Dharm wrote: > Looks good. Tho, I would like to see a future patch to do two things: > 1) Change comments from C++ style to C-style > 2) Make sure we're naming consistently everywhere SCM, USBAT, > USBAT-02 (most noticably needing fixing is the string used at > transport-selection time, but a sweep of all uses to be consistent > would be in order). Sorry for the long delay, here is a patch to address this. I also clarified some ATA/ATAPI wording + function names. Signed-off-by: Daniel Drake Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/shuttle_usbat.c | 306 ++++++++++++++++++++---------------- drivers/usb/storage/shuttle_usbat.h | 66 +++---- drivers/usb/storage/transport.h | 2 drivers/usb/storage/unusual_devs.h | 10 - drivers/usb/storage/usb.c | 4 5 files changed, 213 insertions(+), 175 deletions(-) --- diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index bd448d6c31..33c55a6261 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1,4 +1,4 @@ -/* Driver for SCM Microsystems USB-ATAPI cable +/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable * * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ * @@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); /* - * Convenience function to produce an ATAPI read/write sectors command + * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write */ -static void usbat_pack_atapi_sector_cmd(unsigned char *buf, +static void usbat_pack_ata_sector_cmd(unsigned char *buf, unsigned char thistime, u32 sector, unsigned char cmd) { @@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; - if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok) + /* error/check condition (0x51 is ok) */ + if (*reply & 0x01 && *reply != 0x51) return USB_STOR_TRANSPORT_FAILED; - if (*reply & 0x20) // device fault + /* device fault */ + if (*reply & 0x20) return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_GOOD; @@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us, command[0] = 0x40; command[1] = USBAT_CMD_SET_FEAT; - // The only bit relevant to ATA access is bit 6 - // which defines 8 bit data access (set) or 16 bit (unset) + /* + * The only bit relevant to ATA access is bit 6 + * which defines 8 bit data access (set) or 16 bit (unset) + */ command[2] = epp_control; - // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, - // ET1 and ET2 define an external event to be checked for on event of a - // _read_blocks or _write_blocks operation. The read/write will not take - // place unless the defined trigger signal is active. + /* + * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, + * ET1 and ET2 define an external event to be checked for on event of a + * _read_blocks or _write_blocks operation. The read/write will not take + * place unless the defined trigger signal is active. + */ command[3] = external_trigger; - // The resultant byte of the mask operation (see mask_byte) is compared for - // equivalence with this test pattern. If equal, the read/write will take - // place. + /* + * The resultant byte of the mask operation (see mask_byte) is compared for + * equivalence with this test pattern. If equal, the read/write will take + * place. + */ command[4] = test_pattern; - // This value is logically ANDed with the status register field specified - // in the read/write command. + /* + * This value is logically ANDed with the status register field specified + * in the read/write command. + */ command[5] = mask_byte; - // If ALQ is set in the qualifier, this field contains the address of the - // registers where the byte count should be read for transferring the data. - // If ALQ is not set, then this field contains the number of bytes to be - // transferred. + /* + * If ALQ is set in the qualifier, this field contains the address of the + * registers where the byte count should be read for transferring the data. + * If ALQ is not set, then this field contains the number of bytes to be + * transferred. + */ command[6] = subcountL; command[7] = subcountH; @@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - if (*status & 0x01) { // check condition + if (*status & 0x01) { /* check condition */ result = usbat_read(us, USBAT_ATA, 0x10, status); return USB_STOR_TRANSPORT_FAILED; } - if (*status & 0x20) // device fault + if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; - if ((*status & 0x80)==0x00) { // not busy + if ((*status & 0x80)==0x00) { /* not busy */ US_DEBUGP("Waited not busy for %d steps\n", i); return USB_STOR_TRANSPORT_GOOD; } if (i<500) - msleep(10); // 5 seconds + msleep(10); /* 5 seconds */ else if (i<700) - msleep(50); // 10 seconds + msleep(50); /* 10 seconds */ else if (i<1200) - msleep(100); // 50 seconds + msleep(100); /* 50 seconds */ else - msleep(1000); // X minutes + msleep(1000); /* X minutes */ } US_DEBUGP("Waited not busy for %d minutes, timing out.\n", @@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (i==0) { cmdlen = 16; - // Write to multiple registers - // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here, - // but that's what came out of the trace every single time. + /* + * Write to multiple registers + * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is + * necessary here, but that's what came out of the + * trace every single time. + */ command[0] = 0x40; command[1] = access | USBAT_CMD_WRITE_REGS; command[2] = 0x07; @@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } else cmdlen = 8; - // Conditionally read or write blocks + /* Conditionally read or write blocks */ command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); command[cmdlen-7] = access | (direction==DMA_TO_DEVICE ? @@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } - - //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n", - // direction == DMA_TO_DEVICE ? "out" : "in", - // len, use_sg); - result = usb_stor_bulk_transfer_sg(us, pipe, content, len, use_sg, NULL); @@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - if (*status & 0x01) // check condition + if (*status & 0x01) /* check condition */ return USB_STOR_TRANSPORT_FAILED; - if (*status & 0x20) // device fault + if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; US_DEBUGP("Redoing %s\n", @@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us, BUG_ON(num_registers > US_IOBUF_SIZE/2); - // Write to multiple registers, ATA access + /* Write to multiple registers, ATA access */ command[0] = 0x40; command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; - // No relevance + /* No relevance */ command[2] = 0; command[3] = 0; command[4] = 0; command[5] = 0; - // Number of bytes to be transferred (incl. addresses and data) + /* Number of bytes to be transferred (incl. addresses and data) */ command[6] = LSB_of(num_registers*2); command[7] = MSB_of(num_registers*2); - // The setup command + /* The setup command */ result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Create the reg/data, reg/data sequence + /* Create the reg/data, reg/data sequence */ for (i=0; isense_key = 0x02; @@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us, return USB_STOR_TRANSPORT_FAILED; } - // Check for media change + /* Check for media change */ rc = usbat_flash_check_media_changed(uio); if (rc == USBAT_FLASH_MEDIA_CHANGED) { - // Reset and re-enable card detect + /* Reset and re-enable card detect */ rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; @@ -855,13 +869,13 @@ static int usbat_identify_device(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for error bit, or if the command 'fell through' + /* Check for error bit, or if the command 'fell through' */ if (status == 0xA1 || !(status & 0x01)) { - // Device is HP 8200 + /* Device is HP 8200 */ US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; } else { - // Device is a CompactFlash reader/writer + /* Device is a CompactFlash reader/writer */ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); info->devicetype = USBAT_DEV_FLASH; } @@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, if (!reply) return USB_STOR_TRANSPORT_ERROR; - // ATAPI command : IDENTIFY DEVICE + /* ATA command : IDENTIFY DEVICE */ rc = usbat_multiple_write(us, registers, command, 3); if (rc != USB_STOR_XFER_GOOD) { US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); @@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, goto leave; } - // Read device status + /* Read device status */ if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { rc = USB_STOR_TRANSPORT_ERROR; goto leave; @@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, msleep(100); - // Read the device identification data + /* Read the device identification data */ rc = usbat_read_block(us, reply, 512); if (rc != USB_STOR_TRANSPORT_GOOD) goto leave; @@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) return result; - // we're working in LBA mode. according to the ATA spec, - // we can support up to 28-bit addressing. I don't know if Jumpshot - // supports beyond 24-bit addressing. It's kind of hard to test - // since it requires > 8GB CF card. + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if Jumpshot + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB CF card. + */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; - // Since we don't read more than 64 KB at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we don't read more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); @@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; do { - // loop, never allocate or transfer more than 64k at once - // (min(128k, 255*info->ssize) is the real limit) + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; - // ATAPI command 0x20 (READ SECTORS) - usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20); + /* ATA command 0x20 (READ SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20); - // Write/execute ATAPI read command + /* Write/execute ATA read command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - // Read the data we just requested + /* Read the data we just requested */ result = usbat_read_blocks(us, buffer, len); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); - // Store the data in the transfer buffer + /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, TO_XFER_BUF); @@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) return result; - // we're working in LBA mode. according to the ATA spec, - // we can support up to 28-bit addressing. I don't know if Jumpshot - // supports beyond 24-bit addressing. It's kind of hard to test - // since it requires > 8GB CF card. + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if the device + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB media. + */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; - // Since we don't write more than 64 KB at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we don't write more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); @@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; do { - // loop, never allocate or transfer more than 64k at once - // (min(128k, 255*info->ssize) is the real limit) + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; - // Get the data from the transfer buffer + /* Get the data from the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, FROM_XFER_BUF); - // ATAPI command 0x30 (WRITE SECTORS) - usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30); + /* ATA command 0x30 (WRITE SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30); - // Write/execute ATAPI write command + /* Write/execute ATA write command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - // Write the data + /* Write the data */ result = usbat_write_blocks(us, buffer, len); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; @@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, srb->transfersize); } - // Since we only read in one block at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ len = (65535/srb->transfersize) * srb->transfersize; US_DEBUGP("Max read is %d bytes\n", len); len = min(len, srb->request_bufflen); buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) // bloody hell! + if (buffer == NULL) /* bloody hell! */ return USB_STOR_TRANSPORT_FAILED; sector = short_pack(data[7+3], data[7+2]); sector <<= 16; sector |= short_pack(data[7+5], data[7+4]); transferred = 0; - sg_segment = 0; // for keeping track of where we are in - sg_offset = 0; // the scatter/gather list + sg_segment = 0; /* for keeping track of where we are in */ + sg_offset = 0; /* the scatter/gather list */ while (transferred != srb->request_bufflen) { if (len > srb->request_bufflen - transferred) len = srb->request_bufflen - transferred; - data[3] = len&0xFF; // (cylL) = expected length (L) - data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ - // Fix up the SCSI command sector and num sectors + /* Fix up the SCSI command sector and num sectors */ - data[7+2] = MSB_of(sector>>16); // SCSI command sector + data[7+2] = MSB_of(sector>>16); /* SCSI command sector */ data[7+3] = LSB_of(sector>>16); data[7+4] = MSB_of(sector&0xFFFF); data[7+5] = LSB_of(sector&0xFFFF); if (data[7+0] == GPCMD_READ_CD) data[7+6] = 0; - data[7+7] = MSB_of(len / srb->transfersize); // SCSI command - data[7+8] = LSB_of(len / srb->transfersize); // num sectors + data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */ + data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, @@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) break; - // Store the data in the transfer buffer + /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, srb, &sg_segment, &sg_offset, TO_XFER_BUF); - // Update the amount transferred and the sector number + /* Update the amount transferred and the sector number */ transferred += len; sector += len / srb->transfersize; - } // while transferred != srb->request_bufflen + } /* while transferred != srb->request_bufflen */ kfree(buffer); return result; @@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us) int selector; unsigned char *status = us->iobuf; - // try device = master, then device = slave. + /* try device = master, then device = slave. */ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != USB_STOR_XFER_GOOD) @@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us) memset(us->extra, 0, sizeof(struct usbat_info)); info = (struct usbat_info *) (us->extra); - // Enable peripheral control signals + /* Enable peripheral control signals */ rc = usbat_write_user_io(us, USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); @@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us) US_DEBUGP("INIT 5\n"); - // Enable peripheral control signals and card detect + /* Enable peripheral control signals and card detect */ rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; @@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us) US_DEBUGP("INIT 9\n"); - // At this point, we need to detect which device we are using + /* At this point, we need to detect which device we are using */ if (usbat_set_transport(us, info)) return USB_STOR_TRANSPORT_ERROR; @@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) data[0] = 0x00; data[1] = 0x00; data[2] = 0x00; - data[3] = len&0xFF; // (cylL) = expected length (L) - data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) - data[5] = 0xB0; // (device sel) = slave - data[6] = 0xA0; // (command) = ATA PACKET COMMAND + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ + data[5] = 0xB0; /* (device sel) = slave */ + data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */ for (i=7; i<19; i++) { registers[i] = 0x10; @@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return result; } - // Write the 12-byte command header. - - // If the command is BLANK then set the timer for 75 minutes. - // Otherwise set it for 10 minutes. - - // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW - // AT SPEED 4 IS UNRELIABLE!!! + /* + * Write the 12-byte command header. + * + * If the command is BLANK then set the timer for 75 minutes. + * Otherwise set it for 10 minutes. + * + * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW + * AT SPEED 4 IS UNRELIABLE!!! + */ if ( (result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, @@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return result; } - // If there is response data to be read in - // then do it here. + /* If there is response data to be read in then do it here. */ if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { - // How many bytes to read in? Check cylL register + /* How many bytes to read in? Check cylL register */ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) { return USB_STOR_TRANSPORT_ERROR; } - if (len > 0xFF) { // need to read cylH also + if (len > 0xFF) { /* need to read cylH also */ len = *status; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != USB_STOR_XFER_GOOD) { @@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + /* hard coded 512 byte sectors as per ATA spec */ + info->ssize = 0x200; US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", info->sectors, info->ssize); - // build the reply - // note: must return the sector number of the last sector, - // *not* the total number of sectors + /* + * build the reply + * note: must return the sector number of the last sector, + * *not* the total number of sectors + */ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); usb_stor_set_xfer_buf(ptr, 8, srb); @@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == READ_12) { - // I don't think we'll ever see a READ_12 but support it anyway... + /* + * I don't think we'll ever see a READ_12 but support it anyway + */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); @@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == WRITE_12) { - // I don't think we'll ever see a WRITE_12 but support it anyway... + /* + * I don't think we'll ever see a WRITE_12 but support it anyway + */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); @@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { - // sure. whatever. not like we can stop the user from popping - // the media out of the device (no locking doors, etc) + /* + * sure. whatever. not like we can stop the user from popping + * the media out of the device (no locking doors, etc) + */ return USB_STOR_TRANSPORT_GOOD; } diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h index 5b8e867e2a..25e7d8b340 100644 --- a/drivers/usb/storage/shuttle_usbat.h +++ b/drivers/usb/storage/shuttle_usbat.h @@ -55,8 +55,8 @@ #define USBAT_UIO_WRITE 0 /* Qualifier bits */ -#define USBAT_QUAL_FCQ 0x20 // full compare -#define USBAT_QUAL_ALQ 0x10 // auto load subcount +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ /* USBAT Flash Media status types */ #define USBAT_FLASH_MEDIA_NONE 0 @@ -67,39 +67,39 @@ #define USBAT_FLASH_MEDIA_CHANGED 1 /* USBAT ATA registers */ -#define USBAT_ATA_DATA 0x10 // read/write data (R/W) -#define USBAT_ATA_FEATURES 0x11 // set features (W) -#define USBAT_ATA_ERROR 0x11 // error (R) -#define USBAT_ATA_SECCNT 0x12 // sector count (R/W) -#define USBAT_ATA_SECNUM 0x13 // sector number (R/W) -#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W) -#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W) -#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W) -#define USBAT_ATA_STATUS 0x17 // device status (R) -#define USBAT_ATA_CMD 0x17 // device command (W) -#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R) +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ /* USBAT User I/O Data registers */ -#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals -#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only) - // CDT = ACKD & !UI1 & !UI0 -#define USBAT_UIO_1 0x20 // I/O 1 -#define USBAT_UIO_0 0x10 // I/O 0 -#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode -#define USBAT_UIO_UI1 0x04 // Input 1 -#define USBAT_UIO_UI0 0x02 // Input 0 -#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP) +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ /* USBAT User I/O Enable registers */ -#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral -#define USBAT_UIO_ACKD 0x40 // Enable Card Detect -#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input - // If ACKD=1, set OE1 to 1 also. -#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input -#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ /* USBAT Features */ -#define USBAT_FEAT_ETEN 0x80 // External trigger enable +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ #define USBAT_FEAT_U1 0x08 #define USBAT_FEAT_U0 0x04 #define USBAT_FEAT_ET1 0x02 @@ -112,12 +112,12 @@ struct usbat_info { int devicetype; /* Used for Flash readers only */ - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ }; #endif diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 8d9e0663f8..0a362cc781 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -50,7 +50,7 @@ #define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ #define US_PR_BULK 0x50 /* bulk only */ #ifdef CONFIG_USB_STORAGE_USBAT -#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */ +#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ #endif #ifdef CONFIG_USB_STORAGE_SDDR09 #define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b79dad1b59..71d051d97b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -71,12 +71,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, "HP", "CD-Writer+ 8200e", - US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + US_SC_8070, US_PR_USBAT, init_usbat, 0), UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, "HP", "CD-Writer+ CD-4e", - US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + US_SC_8070, US_PR_USBAT, init_usbat, 0), #endif /* Patch submitted by Mihnea-Costin Grigore */ @@ -333,9 +333,9 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, #ifdef CONFIG_USB_STORAGE_USBAT UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, - "SCM", - "SCM USBAT-02", - US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat, + "Shuttle/SCM", + "USBAT-02", + US_SC_SCSI, US_PR_USBAT, init_usbat, US_FL_SINGLE_LUN), #endif diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index f9a9bfa1ae..5164900e40 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -555,8 +555,8 @@ static int get_transport(struct us_data *us) break; #ifdef CONFIG_USB_STORAGE_USBAT - case US_PR_SCM_ATAPI: - us->transport_name = "SCM/ATAPI"; + case US_PR_USBAT: + us->transport_name = "Shuttle USBAT"; us->transport = usbat_transport; us->transport_reset = usb_stor_CB_reset; us->max_lun = 1;