From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Tue, 2 Oct 2007 13:54:41 +0000 (+0900)
Subject: [MIPS] Cobalt: Move PCI definitions to arch/mips/pci/fixup-cobalt.c.
X-Git-Tag: v2.6.24-rc1~1455^2~21
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b4126e86301cfc6863cbc74bc4500a88b7c582df;p=linux-2.6

[MIPS] Cobalt: Move PCI definitions to arch/mips/pci/fixup-cobalt.c.

These PCI definitions are only used in arch/mips/pci/fixup-cobalt.c.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 4eb5410f84..f7df114291 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -20,6 +20,23 @@
 #include <cobalt.h>
 #include <irq.h>
 
+/*
+ * PCI slot numbers
+ */
+#define COBALT_PCICONF_CPU	0x06
+#define COBALT_PCICONF_ETH0	0x07
+#define COBALT_PCICONF_RAQSCSI	0x08
+#define COBALT_PCICONF_VIA	0x09
+#define COBALT_PCICONF_PCISLOT	0x0A
+#define COBALT_PCICONF_ETH1	0x0C
+
+/*
+ * The Cobalt board ID information.  The boards have an ID number wired
+ * into the VIA that is available in the high nibble of register 94.
+ */
+#define VIA_COBALT_BRD_ID_REG  0x94
+#define VIA_COBALT_BRD_REG_to_ID(reg)	((unsigned char)(reg) >> 4)
+
 static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
 {
 	if (dev->devfn == PCI_DEVFN(0, 0) &&
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
index 408eeccbe5..f27fcef3e3 100644
--- a/include/asm-mips/mach-cobalt/cobalt.h
+++ b/include/asm-mips/mach-cobalt/cobalt.h
@@ -13,37 +13,15 @@
 #define __ASM_COBALT_H
 
 /*
- * PCI configuration space manifest constants.  These are wired into
- * the board layout according to the PCI spec to enable the software
- * to probe the hardware configuration space in a well defined manner.
- *
- * The PCI_DEVSHFT() macro transforms these values into numbers
- * suitable for passing as the dev parameter to the various
- * pcibios_read/write_config routines.
+ * The Cobalt board ID information.
  */
-#define COBALT_PCICONF_CPU      0x06
-#define COBALT_PCICONF_ETH0     0x07
-#define COBALT_PCICONF_RAQSCSI  0x08
-#define COBALT_PCICONF_VIA      0x09
-#define COBALT_PCICONF_PCISLOT  0x0A
-#define COBALT_PCICONF_ETH1     0x0C
-
+extern int cobalt_board_id;
 
-/*
- * The Cobalt board id information.  The boards have an ID number wired
- * into the VIA that is available in the high nibble of register 94.
- * This register is available in the VIA configuration space through the
- * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
- */
-#define VIA_COBALT_BRD_ID_REG  0x94
-#define VIA_COBALT_BRD_REG_to_ID(reg)  ((unsigned char) (reg) >> 4)
 #define COBALT_BRD_ID_QUBE1    0x3
 #define COBALT_BRD_ID_RAQ1     0x4
 #define COBALT_BRD_ID_QUBE2    0x5
 #define COBALT_BRD_ID_RAQ2     0x6
 
-extern int cobalt_board_id;
-
 #define COBALT_LED_PORT		(*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
 # define COBALT_LED_BAR_LEFT	(1 << 0)	/* Qube */
 # define COBALT_LED_BAR_RIGHT	(1 << 1)	/* Qube */