From: Steven Toth Date: Sat, 19 Apr 2008 04:14:19 +0000 (-0300) Subject: V4L/DVB (7645): Add support for the Hauppauge HVR-1200 X-Git-Tag: v2.6.26-rc1~1084^2~80 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b3ea01668907bdb32b0c690d28f9f2b1298bd258;p=linux-2.6 V4L/DVB (7645): Add support for the Hauppauge HVR-1200 This adds support for DVB-T mode only, analog mode is not supported. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 0924e6e142..3e9e999e58 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -5,3 +5,4 @@ 4 -> DViCO FusionHDTV5 Express [18ac:d500] 5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797] 6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717] + 7 -> Hauppauge WinTV-HVR1200 [0070:71d1] diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 1fd326fe41..ca5fbce3a9 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -8,6 +8,7 @@ config VIDEO_CX23885 select VIDEO_TVEEPROM select VIDEO_IR select VIDEOBUF_DVB + select VIDEO_CX25840 select DVB_TUNER_MT2131 if !DVB_FE_CUSTOMISE select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE @@ -16,6 +17,7 @@ config VIDEO_CX23885 select TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select DVB_TDA18271 if !DVB_FE_CUSTOMIZE select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE + select DVB_TDA10048 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 77cd452e6e..8cb32f307a 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -130,6 +130,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1500", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1200] = { + .name = "Hauppauge WinTV-HVR1200", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -181,6 +185,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x7717, .card = CX23885_BOARD_HAUPPAUGE_HVR1500, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -314,6 +322,17 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00040004); mdelay(20); break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + /* GPIO-0 tda10048 demodulator reset */ + /* GPIO-2 tda18271 tuner reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; } } @@ -324,6 +343,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1200: /* FIXME: Implement me */ break; } @@ -353,6 +373,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) break; case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -369,6 +390,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1a720abbd0..18cd90c9c0 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -36,6 +36,7 @@ #include "tda18271.h" #include "lgdt330x.h" #include "xc5000.h" +#include "tda10048.h" #include "dvb-pll.h" #include "tuner-xc2028.h" #include "tuner-xc2028-types.h" @@ -107,6 +108,13 @@ static struct s5h1409_config hauppauge_generic_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct tda10048_config hauppauge_hvr1200_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON +}; + static struct s5h1409_config hauppauge_ezqam_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, @@ -178,6 +186,10 @@ static struct tda18271_config hauppauge_tda18271_config = { .gate = TDA18271_GATE_ANALOG, }; +static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .gate = TDA18271_GATE_ANALOG, +}; + static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) { struct cx23885_tsport *port = ptr; @@ -317,6 +329,20 @@ static int dvb_register(struct cx23885_tsport *port) fe->ops.tuner_ops.set_config(fe, &ctl); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + i2c_bus = &dev->i2c_bus[0]; + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1200_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, port->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, port->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1200_tuner_config); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index 8773a1fd97..85f9d5ef17 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -353,6 +353,7 @@ static struct i2c_client cx23885_i2c_client_template = { }; static char *i2c_devs[128] = { + [0x10 >> 1] = "tda10048", [ 0x1c >> 1 ] = "lgdt3303", [ 0x86 >> 1 ] = "tda9887", [ 0x32 >> 1 ] = "cx24227", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 7cb2179f26..5bbfe6f507 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -59,6 +59,7 @@ #define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4 #define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 #define CX23885_BOARD_HAUPPAUGE_HVR1500 6 +#define CX23885_BOARD_HAUPPAUGE_HVR1200 7 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\