From: Jamie Wellnitz Date: Wed, 1 Mar 2006 00:25:21 +0000 (-0500) Subject: [SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding commands per... X-Git-Tag: v2.6.17-rc1~1129^2~4^2~105 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b28485acb930f67c014024bc3b9c01129124e566;p=linux-2.6 [SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding commands per lpfc HBA Add module parameter to limit number of outstanding commands per lpfc HBA Signed-off-by: Jamie Wellnitz Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5625a8c2a8..b897e522a9 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -519,6 +519,16 @@ LPFC_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff, "Verbose logging bit-mask"); LPFC_ATTR_R(lun_queue_depth, 30, 1, 128, "Max number of FCP commands we can queue to a specific LUN"); +/* +# hba_queue_depth: This parameter is used to limit the number of outstanding +# commands per lpfc HBA. Value range is [32,8192]. If this parameter +# value is greater than the maximum number of exchanges supported by the HBA, +# then maximum number of exchanges supported by the HBA is used to determine +# the hba_queue_depth. +*/ +LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192, + "Max number of FCP commands we can queue to a lpfc HBA"); + /* # Some disk devices have a "select ID" or "select Target" capability. # From a protocol standpoint "select ID" usually means select the @@ -649,6 +659,7 @@ struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_lpfc_drvr_version, &class_device_attr_lpfc_log_verbose, &class_device_attr_lpfc_lun_queue_depth, + &class_device_attr_lpfc_hba_queue_depth, &class_device_attr_lpfc_nodev_tmo, &class_device_attr_lpfc_fcp_class, &class_device_attr_lpfc_use_adisc, @@ -1411,5 +1422,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) default: phba->cfg_hba_queue_depth = LPFC_DFT_HBA_Q_DEPTH; } + + if (phba->cfg_hba_queue_depth > lpfc_hba_queue_depth) + lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); + return; }