From: Jordan Hargrave <jordan_hargrave@dell.com>
Date: Fri, 7 Apr 2006 17:50:18 +0000 (+0200)
Subject: [PATCH] x86_64: Fix drift with HPET timer enabled
X-Git-Tag: v2.6.17-rc2~305
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b20367a6c2a0cd937cb1f0a8cf848f1402fef99c;p=linux-2.6

[PATCH] x86_64: Fix drift with HPET timer enabled

If the HPET timer is enabled, the clock can drift by ~3 seconds a day.
This is due to the HPET timer not being initialized with the correct
setting (still using PIT count).

If HZ changes, this drift can become even more pronounced.

HPET patch initializes tick_nsec with correct tick_nsec settings for
HPET timer.

Vojtech comments:

  "It's not entirely correct (it assumes the HPET ticks totally
   exactly), but it's significantly better than assuming the PIT error
   there."

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 2eeaa95edf..7392570f97 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -917,6 +917,8 @@ void __init time_init(void)
 		vxtime.hpet_address = 0;
 
 	if (hpet_use_timer) {
+		/* set tick_nsec to use the proper rate for HPET */
+	  	tick_nsec = TICK_NSEC_HPET;
 		cpu_khz = hpet_calibrate_tsc();
 		timename = "HPET";
 #ifdef CONFIG_X86_PM_TIMER
diff --git a/include/asm-i386/hpet.h b/include/asm-i386/hpet.h
index 16ef9f996e..7f1a8a6ee3 100644
--- a/include/asm-i386/hpet.h
+++ b/include/asm-i386/hpet.h
@@ -89,6 +89,7 @@
  * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
  */
 #define HPET_MIN_PERIOD (100000UL)
+#define HPET_TICK_RATE  (HZ * 100000UL)
 
 extern unsigned long hpet_tick;  	/* hpet clks count per tick */
 extern unsigned long hpet_address;	/* hpet memory map physical address */
diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h
index 08b75c1526..18ff7ee9e7 100644
--- a/include/asm-x86_64/hpet.h
+++ b/include/asm-x86_64/hpet.h
@@ -51,6 +51,8 @@
 
 #define HPET_TN_ROUTE_SHIFT	9
 
+#define HPET_TICK_RATE (HZ * 100000UL)
+
 extern int is_hpet_enabled(void);
 extern int hpet_rtc_timer_init(void);
 extern int oem_force_hpet_timer(void);
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 99905e1805..043376920f 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -36,6 +36,8 @@
 /* LATCH is used in the interval timer and ftape setup. */
 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
 
+#define LATCH_HPET ((HPET_TICK_RATE + HZ/2) / HZ)
+
 /* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
  * improve accuracy by shifting LSH bits, hence calculating:
  *     (NOM << LSH) / DEN
@@ -51,9 +53,13 @@
 /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
 #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
 
+#define ACTHZ_HPET (SH_DIV (HPET_TICK_RATE, LATCH_HPET, 8))
+
 /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
 #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
 
+#define TICK_NSEC_HPET (SH_DIV(1000000UL * 1000, ACTHZ_HPET, 8))
+
 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
 
diff --git a/kernel/timer.c b/kernel/timer.c
index c3a874f139..471ab8710b 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1455,7 +1455,7 @@ static void time_interpolator_update(long delta_nsec)
 	 */
 	if (jiffies % INTERPOLATOR_ADJUST == 0)
 	{
-		if (time_interpolator->skips == 0 && time_interpolator->offset > TICK_NSEC)
+		if (time_interpolator->skips == 0 && time_interpolator->offset > tick_nsec)
 			time_interpolator->nsec_per_cyc--;
 		if (time_interpolator->ns_skipped > INTERPOLATOR_MAX_SKIP && time_interpolator->offset == 0)
 			time_interpolator->nsec_per_cyc++;