From: Greg Ungerer <gerg@snapgear.com>
Date: Mon, 12 Sep 2005 01:18:10 +0000 (+1000)
Subject: [PATCH] m68knommu: add ColdFire serial driver support for 523x processor family
X-Git-Tag: v2.6.14-rc1~104
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b0433b99339a9fdc2effe213491812556e4896fb;p=linux-2.6

[PATCH] m68knommu: add ColdFire serial driver support for 523x processor family

Add support for the new Freescale 523x processor family to ColdFire
serial driver. Also set different default baud rate for MOD5272
board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index 43b03c55f4..e2ebdcad55 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -63,8 +63,13 @@ struct timer_list mcfrs_timer_struct;
 #endif
 
 #if defined(CONFIG_HW_FEITH)
-  #define	CONSOLE_BAUD_RATE	38400
-  #define	DEFAULT_CBAUD		B38400
+#define	CONSOLE_BAUD_RATE	38400
+#define	DEFAULT_CBAUD		B38400
+#endif
+
+#if defined(CONFIG_MOD5272)
+#define CONSOLE_BAUD_RATE 	115200
+#define DEFAULT_CBAUD		B115200
 #endif
 
 #ifndef CONSOLE_BAUD_RATE
@@ -90,7 +95,7 @@ static struct tty_driver *mcfrs_serial_driver;
 #undef SERIAL_DEBUG_OPEN
 #undef SERIAL_DEBUG_FLOW
 
-#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
 #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
 #else
 #define	IRQBASE	73
@@ -1510,7 +1515,7 @@ static void mcfrs_irqinit(struct mcf_serial *info)
 	*portp = (*portp & ~0x000000ff) | 0x00000055;
 	portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
 	*portp = (*portp & ~0x000003fc) | 0x000002a8;
-#elif defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
 	volatile unsigned char *icrp, *uartp;
 	volatile unsigned long *imrp;