From: Jason Jin <Jason.jin@freescale.com>
Date: Fri, 23 May 2008 08:32:45 +0000 (+0800)
Subject: [POWERPC] Update booting-without-of for Freescale PCIe MSI
X-Git-Tag: v2.6.27-rc1~1058^2~188
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=aee1dc73b519227084d77b0b2fc972b68b4153d8;p=linux-2.6

[POWERPC] Update booting-without-of for Freescale PCIe MSI

Binding document adding for Freescale PCIe MSI support.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772506..c67d2f5897 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -57,7 +57,10 @@ Table of Contents
       n) 4xx/Axon EMAC ethernet nodes
       o) Xilinx IP cores
       p) Freescale Synchronous Serial Interface
-	  q) USB EHCI controllers
+      q) USB EHCI controllers
+      r) Freescale Display Interface Unit
+      s) Freescale on board FPGA
+      t) Freescael MSI interrupt controller
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -2870,6 +2873,44 @@ platforms are moved over to use the flattened-device-tree model.
 		reg = <0xe8000000 32>;
 	};
 
+    t) Freescale MSI interrupt controller
+
+    Reguired properities:
+    - compatible : compatible list, contains 2 entries,
+      first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+      etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
+      the parent type.
+    - reg : should contain the address and the length of the shared message
+      interrupt register set.
+    - msi-available-ranges: use <start count> style section to define which
+      msi interrupt can be used in the 256 msi interrupts. This property is
+      optional, without this, all the 256 MSI interrupts can be used.
+    - interrupts : each one of the interrupts here is one entry per 32 MSIs,
+      and routed to the host interrupt controller. the interrupts should
+      be set as edge sensitive.
+    - interrupt-parent: the phandle for the interrupt controller
+      that services interrupts for this device. for 83xx cpu, the interrupts
+      are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
+      to MPIC.
+
+    Example
+	msi@41600 {
+		compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+		reg = <0x41600 0x80>;
+		msi-available-ranges = <0 0x100>;
+		interrupts = <
+			0xe0 0
+			0xe1 0
+			0xe2 0
+			0xe3 0
+			0xe4 0
+			0xe5 0
+			0xe6 0
+			0xe7 0>;
+		interrupt-parent = <&mpic>;
+	};
+
+
 VII - Marvell Discovery mv64[345]6x System Controller chips
 ===========================================================