From: Jean Delvare Date: Tue, 13 Feb 2007 21:09:02 +0000 (+0100) Subject: i2c-viapro: Add support for the VIA CX700 south bridge X-Git-Tag: v2.6.21-rc1~273^2~4^2~6 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=ab6a6ed271c757b429ddc68f5b93a41f9592ab8b;p=linux-2.6 i2c-viapro: Add support for the VIA CX700 south bridge We do not have any documentation for the CX700, but it was reported to work fine. Thanks to Claas Langbehn for testing. Signed-off-by: Jean Delvare --- diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 25680346e0..775f489e86 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -13,6 +13,9 @@ Supported adapters: * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251 Datasheet: available on request and under NDA from VIA + * VIA Technologies, Inc. CX700 + Datasheet: available on request and under NDA from VIA + Authors: Kyösti Mälkki , Mark D. Studebaker , @@ -44,6 +47,7 @@ Your lspci -n listing must show one of these : device 1106:3227 (VT8237R) device 1106:3337 (VT8237A) device 1106:3287 (VT8251) + device 1106:8324 (CX700) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. @@ -51,3 +55,6 @@ enable ACPI / SMBus or even USB. Except for the oldest chips (VT82C596A/B, VT82C686A and most probably VT8231), this driver supports I2C block transactions. Such transactions are mainly useful to read from and write to EEPROMs. + +The CX700 additionally appears to support SMBus PEC, although this driver +doesn't implement it yet. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f2894dec51..25d52e0eec 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -500,11 +500,11 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA 82C596/82C686/82xx" + tristate "VIA VT82C596/82C686/82xx and CX700" depends on I2C && PCI help If you say yes to this option, support will be included for the VIA - 82C596/82C686/82xx I2C interfaces. Specifically, the following + VT82C596 and later SMBus interface. Specifically, the following chipsets are supported: VT82C596A/B VT82C686A/B @@ -513,6 +513,7 @@ config I2C_VIAPRO VT8235 VT8237R/A VT8251 + CX700 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 43a081f165..03c5fc8685 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker - Copyright (C) 2005 Jean Delvare + Copyright (C) 2005 - 2007 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,6 +36,7 @@ VT8237R 0x3227 yes VT8237A 0x3337 yes VT8251 0x3287 yes + CX700 0x8324 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -384,6 +385,7 @@ found: dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CX700: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -443,6 +445,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), + .driver_data = SMBBA3 }, { 0, } };