From: Paul Mackerras Date: Sun, 15 Jan 2006 06:30:44 +0000 (+1100) Subject: [PATCH] ppc: Remove powermac support from ARCH=ppc X-Git-Tag: v2.6.16-rc1~103^2~2 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a7fdd90bc43e3e9cb08bc1b13650024d419b89e5;p=linux-2.6 [PATCH] ppc: Remove powermac support from ARCH=ppc This makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. (This does mean that it is no longer possible to build a 32-bit kernel for a G5.) Signed-off-by: Paul Mackerras --- diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index d65810108b..11899f06bf 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -58,11 +58,11 @@ config 6xx help There are four types of PowerPC chips supported. The more common types (601, 603, 604, 740, 750, 7400), the Motorola embedded - versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded - versions (403 and 405) and the high end 64 bit Power processors - (POWER 3, POWER4, and IBM 970 also known as G5) + versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM + embedded versions (403 and 405) and the POWER3 processor. + (For support for more recent 64-bit processors, set ARCH=powerpc.) Unless you are building a kernel for one of the embedded processor - systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx. + systems or a POWER3-based IBM RS/6000, choose 6xx. Note that the kernel runs in 32-bit mode even on 64-bit chips. Also note that because the 52xx, 82xx, & 83xx family has a 603e core, specific support for that chipset is asked later on. @@ -77,10 +77,6 @@ config POWER3 select PPC_FPU bool "POWER3" -config POWER4 - select PPC_FPU - bool "POWER4 and 970 (G5)" - config 8xx bool "8xx" @@ -123,7 +119,7 @@ config PHYS_64BIT config ALTIVEC bool "AltiVec Support" - depends on 6xx || POWER4 + depends on 6xx depends on !8260 && !83xx ---help--- This option enables kernel support for the Altivec extensions to the @@ -235,18 +231,9 @@ config KEXEC source "drivers/cpufreq/Kconfig" -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on CPU_FREQ && ADB_PMU - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" - depends on 6xx && (PPC_PREP || PPC_PMAC) + depends on 6xx && PPC_PREP help Some versions of the PPC601 (the first PowerPC chip) have bugs which mean that extra synchronization instructions are required near @@ -258,26 +245,17 @@ config PPC601_SYNC_FIX If in doubt, say Y here. -config HOTPLUG_CPU - bool "Support for enabling/disabling CPUs" - depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC - ---help--- - Say Y here to be able to disable and re-enable individual - CPUs at runtime on SMP machines. - - Say N if you are unsure. - source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/85xx/Kconfig config PPC64BRIDGE bool - depends on POWER3 || POWER4 + depends on POWER3 default y config PPC_STD_MMU bool - depends on 6xx || POWER3 || POWER4 + depends on 6xx || POWER3 default y config NOT_COHERENT_CACHE @@ -505,7 +483,7 @@ endchoice choice prompt "Machine Type" - depends on 6xx || POWER3 || POWER4 + depends on 6xx || POWER3 default PPC_MULTIPLATFORM ---help--- Linux currently supports several different kinds of PowerPC-based @@ -516,11 +494,15 @@ choice Platform) machines (including all of the recent IBM RS/6000 and pSeries machines), and several embedded PowerPC systems containing 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the - default option is to build a kernel which works on the first three. + default option is to build a kernel which works on PReP and CHRP. - Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or - pSeries machine, a Power Macintosh (including iMacs, iBooks and - Powerbooks), or a PReP machine. + Note that support for Apple machines is now only available with + ARCH=powerpc, and has been removed from this menu. If you wish + to build a kernel for an Apple machine, exit this configuration + process and re-run it with ARCH=powerpc. + + Select CHRP/PReP if configuring for an IBM RS/6000 or + pSeries machine, or a PReP machine. Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: @@ -530,7 +512,7 @@ choice available at: . config PPC_MULTIPLATFORM - bool "CHRP/PowerMac/PReP" + bool "CHRP/PReP" config APUS bool "Amiga-APUS" @@ -768,25 +750,14 @@ config CPM2 on it (826x, 827x, 8560). config PPC_CHRP - bool + bool "Support for CHRP (Common Hardware Reference Platform) machines" depends on PPC_MULTIPLATFORM select PPC_I8259 select PPC_INDIRECT_PCI default y -config PPC_PMAC - bool - depends on PPC_MULTIPLATFORM - select PPC_INDIRECT_PCI - default y - -config PPC_PMAC64 - bool - depends on PPC_PMAC && POWER4 - default y - config PPC_PREP - bool + bool "Support for PReP (PowerPC Reference Platform) machines" depends on PPC_MULTIPLATFORM select PPC_I8259 select PPC_INDIRECT_PCI @@ -794,7 +765,7 @@ config PPC_PREP config PPC_OF bool - depends on PPC_PMAC || PPC_CHRP + depends on PPC_CHRP default y config PPC_GEN550 @@ -1166,7 +1137,7 @@ config ISA config GENERIC_ISA_DMA bool - depends on POWER3 || POWER4 || 6xx && !CPM2 + depends on POWER3 || 6xx && !CPM2 default y config PPC_I8259 diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index 995f89bb04..efd8ce515d 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -18,7 +18,7 @@ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd bootdir-y := simple bootdir-$(CONFIG_PPC_OF) += openfirmware subdir-y := lib common images -subdir-$(CONFIG_PPC_OF) += of1275 +subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275 # for cleaning subdir- += simple openfirmware diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 83a6433459..2a411ec2e6 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -21,26 +21,16 @@ bootlib := $(boot)/lib of1275 := $(boot)/of1275 images := $(boot)/images -OBJCOPY_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment -COFF_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00500000 \ - -Bstatic CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000 -NEWWORLD_LD_ARGS:= -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x01000000 COMMONOBJS := start.o misc.o common.o -COFFOBJS := coffcrt0.o $(COMMONOBJS) coffmain.o CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o -NEWWORLDOBJS := crt0.o $(COMMONOBJS) newworldmain.o -targets := $(COFFOBJS) $(CHRPOBJS) $(NEWWORLDOBJS) dummy.o -COFFOBJS := $(addprefix $(obj)/, $(COFFOBJS)) +targets := $(CHRPOBJS) dummy.o CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS)) -NEWWORLDOBJS := $(addprefix $(obj)/, $(NEWWORLDOBJS)) LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a -HACKCOFF := $(utils)/hack-coff - ifdef CONFIG_SMP END := .smp endif @@ -72,56 +62,11 @@ targets += image.initrd.o $(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE $(call if_changed,genimage-initrd) -# Create the note section for New-World PowerMacs. -quiet_cmd_mknote = MKNOTE $@ - cmd_mknote = $(utils)/mknote > $@ -targets += note -$(obj)/note: $(utils)/mknote FORCE - $(call if_changed,mknote) - -$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF -targets += coffcrt0.o crt0.o -$(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE +targets += crt0.o +$(obj)/crt0.o: $(common)/crt0.S FORCE $(call if_changed_dep,as_o_S) -quiet_cmd_gencoffb = COFF $@ - cmd_gencoffb = $(LD) -o $@ $(COFF_LD_ARGS) $(COFFOBJS) $< $(LIBS) && \ - $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) -targets += coffboot -$(obj)/coffboot: $(obj)/image.o $(COFFOBJS) $(LIBS) $(srctree)/$(boot)/ld.script FORCE - $(call if_changed,gencoffb) -targets += coffboot.initrd -$(obj)/coffboot.initrd: $(obj)/image.initrd.o $(COFFOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script FORCE - $(call if_changed,gencoffb) - - -quiet_cmd_gen-coff = COFF $@ - cmd_gen-coff = $(OBJCOPY) $(OBJCOPY_ARGS) $< $@ && \ - $(HACKCOFF) $@ && \ - ln -sf $(notdir $@) $(images)/zImage$(initrd).pmac - -$(images)/vmlinux.coff: $(obj)/coffboot - $(call cmd,gen-coff) - -$(images)/vmlinux.initrd.coff: $(obj)/coffboot.initrd - $(call cmd,gen-coff) - -quiet_cmd_gen-elf-pmac = ELF $@ - cmd_gen-elf-pmac = $(LD) $(NEWWORLD_LD_ARGS) -o $@ \ - $(NEWWORLDOBJS) $(LIBS) $< && \ - $(OBJCOPY) $@ $@ --add-section=.note=$(obj)/note \ - -R .comment $(del-ramdisk-sec) - -$(images)/vmlinux.elf-pmac: $(obj)/image.o $(NEWWORLDOBJS) $(LIBS) \ - $(obj)/note $(srctree)/$(boot)/ld.script - $(call cmd,gen-elf-pmac) -$(images)/vmlinux.initrd.elf-pmac: $(obj)/image.initrd.o $(NEWWORLDOBJS) \ - $(LIBS) $(obj)/note \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-elf-pmac) - quiet_cmd_gen-chrp = CHRP $@ cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \ $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) @@ -139,46 +84,23 @@ $(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \ %-rs6k: % $(call cmd,addnote) -quiet_cmd_gen-miboot = GEN $@ - cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=$1=$(word 2, $^) $< $@ -$(images)/miboot.image: $(obj)/dummy.o $(images)/vmlinux.gz - $(call cmd,gen-miboot,image) - -$(images)/miboot.initrd.image: $(images)/miboot.image $(images)/ramdisk.image.gz - $(call cmd,gen-miboot,initrd) - # The targets used on the make command-line .PHONY: zImage zImage.initrd -zImage: $(images)/vmlinux.coff \ - $(images)/vmlinux.elf-pmac \ - $(images)/zImage.chrp \ - $(images)/zImage.chrp-rs6k \ - $(images)/miboot.image +zImage: $(images)/zImage.chrp \ + $(images)/zImage.chrp-rs6k @echo ' kernel: $@ is ready ($<)' -zImage.initrd: $(images)/vmlinux.initrd.coff \ - $(images)/vmlinux.initrd.elf-pmac \ - $(images)/zImage.initrd.chrp \ - $(images)/zImage.initrd.chrp-rs6k \ - $(images)/miboot.initrd.image +zImage.initrd: $(images)/zImage.initrd.chrp \ + $(images)/zImage.initrd.chrp-rs6k @echo ' kernel: $@ is ready ($<)' TFTPIMAGE := /tftpboot/zImage .PHONY: znetboot znetboot.initrd -znetboot: $(images)/vmlinux.coff \ - $(images)/vmlinux.elf-pmac \ - $(images)/zImage.chrp - cp $(images)/vmlinux.coff $(TFTPIMAGE).pmac$(END) - cp $(images)/vmlinux.elf-pmac $(TFTPIMAGE).pmac$(END).elf +znetboot: $(images)/zImage.chrp cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END) @echo ' kernel: $@ is ready ($<)' -znetboot.initrd:$(images)/vmlinux.initrd.coff \ - $(images)/vmlinux.initrd.elf-pmac \ - $(images)/zImage.initrd.chrp - cp $(images)/vmlinux.initrd.coff $(TFTPIMAGE).pmac$(END) - cp $(images)/vmlinux.initrd.elf-pmac $(TFTPIMAGE).pmac$(END).elf +znetboot.initrd:$(images)/zImage.initrd.chrp cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END) @echo ' kernel: $@ is ready ($<)' diff --git a/arch/ppc/boot/openfirmware/coffmain.c b/arch/ppc/boot/openfirmware/coffmain.c deleted file mode 100644 index 2da8855e2b..0000000000 --- a/arch/ppc/boot/openfirmware/coffmain.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include - -#include "nonstdio.h" -#include "of1275.h" - -/* Passed from the linker */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin[], __ramdisk_end; -extern char _start, _end; - -extern char image_data[], initrd_data[]; -extern int initrd_len, image_len; -extern unsigned int heap_max; -extern void flush_cache(void *start, unsigned int len); -extern void gunzip(void *, int, unsigned char *, int *); -extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned int progend); -extern void setup_bats(unsigned long start); - -char *avail_ram; -char *begin_avail, *end_avail; -char *avail_high; - -#define SCRATCH_SIZE (128 << 10) - -static char heap[SCRATCH_SIZE]; - -static unsigned long ram_start = 0; -static unsigned long ram_end = 0x1000000; - -static unsigned long prog_start = 0x800000; -static unsigned long prog_size = 0x700000; - -typedef void (*kernel_start_t)(int, int, void *); - -void boot(int a1, int a2, void *prom) -{ - unsigned sa, len; - void *dst; - unsigned char *im; - unsigned initrd_start, initrd_size; - - printf("coffboot starting: loaded at 0x%p\n", &_start); - setup_bats(ram_start); - - initrd_size = (char *)(&__ramdisk_end) - (char *)(&__ramdisk_begin); - if (initrd_size) { - initrd_start = (ram_end - initrd_size) & ~0xFFF; - a1 = initrd_start; - a2 = initrd_size; - claim(initrd_start, ram_end - initrd_start, 0); - printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r", - initrd_start, (char *)(&__ramdisk_begin), initrd_size); - memcpy((char *)initrd_start, (char *)(&__ramdisk_begin), initrd_size); - prog_size = initrd_start - prog_start; - } else - a2 = 0xdeadbeef; - - im = (char *)(&__image_begin); - len = (char *)(&__image_end) - (char *)(&__image_begin); - /* claim 4MB starting at PROG_START */ - claim(prog_start, prog_size, 0); - map(prog_start, prog_start, prog_size); - dst = (void *) prog_start; - if (im[0] == 0x1f && im[1] == 0x8b) { - /* set up scratch space */ - begin_avail = avail_high = avail_ram = heap; - end_avail = heap + sizeof(heap); - printf("heap at 0x%p\n", avail_ram); - printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len); - gunzip(dst, prog_size, im, &len); - printf("done %u bytes\n", len); - printf("%u bytes of heap consumed, max in use %u\n", - avail_high - begin_avail, heap_max); - } else { - memmove(dst, im, len); - } - - flush_cache(dst, len); - make_bi_recs(((unsigned long) dst + len), "coffboot", _MACH_Pmac, - (prog_start + prog_size)); - - sa = (unsigned long)prog_start; - printf("start address = 0x%x\n", sa); - - (*(kernel_start_t)sa)(a1, a2, prom); - - printf("returned?\n"); - - pause(); -} diff --git a/arch/ppc/boot/openfirmware/newworldmain.c b/arch/ppc/boot/openfirmware/newworldmain.c deleted file mode 100644 index fa8a8f9313..0000000000 --- a/arch/ppc/boot/openfirmware/newworldmain.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include "nonstdio.h" -#include "of1275.h" -#include -#include - -/* Passed from the linker */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin[], __ramdisk_end; -extern char _start, _end; - -extern unsigned int heap_max; -extern void flush_cache(void *start, unsigned int len); -extern void gunzip(void *, int, unsigned char *, int *); -extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned int progend); - -char *avail_ram; -char *begin_avail, *end_avail; -char *avail_high; - - -#define RAM_END (16 << 20) - -#define PROG_START 0x00010000 -#define PROG_SIZE 0x007f0000 - -#define SCRATCH_SIZE (128 << 10) - -typedef void (*kernel_start_t)(int, int, void *); - -void boot(int a1, int a2, void *prom) -{ - unsigned sa, len; - void *dst; - unsigned char *im; - unsigned initrd_start, initrd_size; - - printf("chrpboot starting: loaded at 0x%p\n", &_start); - - initrd_size = (char *)(&__ramdisk_end) - (char *)(&__ramdisk_begin); - if (initrd_size) { - initrd_start = (RAM_END - initrd_size) & ~0xFFF; - a1 = initrd_start; - a2 = initrd_size; - claim(initrd_start, RAM_END - initrd_start, 0); - printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r", - initrd_start, (char *)(&__ramdisk_begin), initrd_size); - memcpy((char *)initrd_start, (char *)(&__ramdisk_begin), initrd_size); - } else - a2 = 0xdeadbeef; - - im = (char *)(&__image_begin); - len = (char *)(&__image_end) - (char *)(&__image_begin); - /* claim 3MB starting at PROG_START */ - claim(PROG_START, PROG_SIZE, 0); - dst = (void *) PROG_START; - if (im[0] == 0x1f && im[1] == 0x8b) { - /* claim some memory for scratch space */ - avail_ram = (char *) claim(0, SCRATCH_SIZE, 0x10); - begin_avail = avail_high = avail_ram; - end_avail = avail_ram + SCRATCH_SIZE; - printf("heap at 0x%p\n", avail_ram); - printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len); - gunzip(dst, PROG_SIZE, im, &len); - printf("done %u bytes\n", len); - printf("%u bytes of heap consumed, max in use %u\n", - avail_high - begin_avail, heap_max); - release(begin_avail, SCRATCH_SIZE); - } else { - memmove(dst, im, len); - } - - flush_cache(dst, len); - make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_Pmac, - (PROG_START + PROG_SIZE)); - - sa = (unsigned long)PROG_START; - printf("start address = 0x%x\n", sa); - - (*(kernel_start_t)sa)(a1, a2, prom); - - printf("returned?\n"); - - pause(); -} diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index ca02013008..647da4c1d2 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -9,7 +9,6 @@ extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-$(CONFIG_6xx) += idle_6xx.o -extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ @@ -17,7 +16,6 @@ obj-y := entry.o traps.o idle.o time.o misc.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o -obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index fb5658bba2..c3427eed83 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -204,78 +204,6 @@ _GLOBAL(call_setup_cpu) mtctr r5 bctr -#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx) - -/* This gets called by via-pmu.c to switch the PLL selection - * on 750fx CPU. This function should really be moved to some - * other place (as most of the cpufreq code in via-pmu - */ -_GLOBAL(low_choose_750fx_pll) - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* If switching to PLL1, disable HID0:BTIC */ - cmplwi cr0,r3,0 - beq 1f - mfspr r5,SPRN_HID0 - rlwinm r5,r5,0,27,25 - sync - mtspr SPRN_HID0,r5 - isync - sync - -1: - /* Calc new HID1 value */ - mfspr r4,SPRN_HID1 /* Build a HID1:PS bit from parameter */ - rlwinm r5,r3,16,15,15 /* Clear out HID1:PS from value read */ - rlwinm r4,r4,0,16,14 /* Could have I used rlwimi here ? */ - or r4,r4,r5 - mtspr SPRN_HID1,r4 - - /* Store new HID1 image */ - rlwinm r6,r1,0,0,18 - lwz r6,TI_CPU(r6) - slwi r6,r6,2 - addis r6,r6,nap_save_hid1@ha - stw r4,nap_save_hid1@l(r6) - - /* If switching to PLL0, enable HID0:BTIC */ - cmplwi cr0,r3,0 - bne 1f - mfspr r5,SPRN_HID0 - ori r5,r5,HID0_BTIC - sync - mtspr SPRN_HID0,r5 - isync - sync - -1: - /* Return */ - mtmsr r7 - blr - -_GLOBAL(low_choose_7447a_dfs) - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Calc new HID1 value */ - mfspr r4,SPRN_HID1 - insrwi r4,r3,1,9 /* insert parameter into bit 9 */ - sync - mtspr SPRN_HID1,r4 - sync - isync - - /* Return */ - mtmsr r7 - blr - -#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */ - /* * complement mask on the msr then "or" some values on. * _nmask_and_or_msr(nmask, value_to_or) diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 704c846b2b..04d04c5bfd 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -1,5 +1,5 @@ /* - * Common pmac/prep/chrp pci routines. -- Cort + * Common prep/chrp pci routines. -- Cort */ #include @@ -50,8 +50,7 @@ static void fixup_cpc710_pci64(struct pci_dev* dev); static u8* pci_to_OF_bus_map; #endif -/* By default, we don't re-assign bus numbers. We do this only on - * some pmacs +/* By default, we don't re-assign bus numbers. */ int pci_assign_all_buses; @@ -780,17 +779,6 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) return NULL; /* Fixup bus number according to what OF think it is. */ -#ifdef CONFIG_PPC_PMAC - /* The G5 need a special case here. Basically, we don't remap all - * busses on it so we don't create the pci-OF-map. However, we do - * remap the AGP bus and so have to deal with it. A future better - * fix has to be done by making the remapping per-host and always - * filling the pci_to_OF map. --BenH - */ - if (_machine == _MACH_Pmac && busnr >= 0xf0) - busnr -= 0xf0; - else -#endif if (pci_to_OF_bus_map) busnr = pci_to_OF_bus_map[busnr]; if (busnr == 0xff) @@ -1040,216 +1028,6 @@ void pcibios_add_platform_entries(struct pci_dev *pdev) } -#ifdef CONFIG_PPC_PMAC -/* - * This set of routines checks for PCI<->PCI bridges that have closed - * IO resources and have child devices. It tries to re-open an IO - * window on them. - * - * This is a _temporary_ fix to workaround a problem with Apple's OF - * closing IO windows on P2P bridges when the OF drivers of cards - * below this bridge don't claim any IO range (typically ATI or - * Adaptec). - * - * A more complete fix would be to use drivers/pci/setup-bus.c, which - * involves a working pcibios_fixup_pbus_ranges(), some more care about - * ordering when creating the host bus resources, and maybe a few more - * minor tweaks - */ - -/* Initialize bridges with base/limit values we have collected */ -static void __init -do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga) -{ - struct pci_dev *bridge = bus->self; - struct pci_controller* hose = (struct pci_controller *)bridge->sysdata; - u32 l; - u16 w; - struct resource res; - - if (bus->resource[0] == NULL) - return; - res = *(bus->resource[0]); - - DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge)); - res.start -= ((unsigned long) hose->io_base_virt - isa_io_base); - res.end -= ((unsigned long) hose->io_base_virt - isa_io_base); - DBG(" IO window: %08lx-%08lx\n", res.start, res.end); - - /* Set up the top and bottom of the PCI I/O segment for this bus. */ - pci_read_config_dword(bridge, PCI_IO_BASE, &l); - l &= 0xffff000f; - l |= (res.start >> 8) & 0x00f0; - l |= res.end & 0xf000; - pci_write_config_dword(bridge, PCI_IO_BASE, l); - - if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { - l = (res.start >> 16) | (res.end & 0xffff0000); - pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l); - } - - pci_read_config_word(bridge, PCI_COMMAND, &w); - w |= PCI_COMMAND_IO; - pci_write_config_word(bridge, PCI_COMMAND, w); - -#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */ - if (enable_vga) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w); - w |= PCI_BRIDGE_CTL_VGA; - pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w); - } -#endif -} - -/* This function is pretty basic and actually quite broken for the - * general case, it's enough for us right now though. It's supposed - * to tell us if we need to open an IO range at all or not and what - * size. - */ -static int __init -check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga) -{ - struct pci_dev *dev; - int i; - int rc = 0; - -#define push_end(res, size) do { unsigned long __sz = (size) ; \ - res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \ - } while (0) - - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_DISPLAY_VGA || - class == PCI_CLASS_NOT_DEFINED_VGA) - *found_vga = 1; - if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate) - rc |= check_for_io_childs(dev->subordinate, res, found_vga); - if (class == PCI_CLASS_BRIDGE_CARDBUS) - push_end(res, 0xfff); - - for (i=0; iclass >> 8 == PCI_CLASS_BRIDGE_PCI - && i >= PCI_BRIDGE_RESOURCES) - continue; - r = &dev->resource[i]; - r_size = r->end - r->start; - if (r_size < 0xfff) - r_size = 0xfff; - if (r->flags & IORESOURCE_IO && (r_size) != 0) { - rc = 1; - push_end(res, r_size); - } - } - } - - return rc; -} - -/* Here we scan all P2P bridges of a given level that have a closed - * IO window. Note that the test for the presence of a VGA card should - * be improved to take into account already configured P2P bridges, - * currently, we don't see them and might end up configuring 2 bridges - * with VGA pass through enabled - */ -static void __init -do_fixup_p2p_level(struct pci_bus *bus) -{ - struct pci_bus *b; - int i, parent_io; - int has_vga = 0; - - for (parent_io=0; parent_io<4; parent_io++) - if (bus->resource[parent_io] - && bus->resource[parent_io]->flags & IORESOURCE_IO) - break; - if (parent_io >= 4) - return; - - list_for_each_entry(b, &bus->children, node) { - struct pci_dev *d = b->self; - struct pci_controller* hose = (struct pci_controller *)d->sysdata; - struct resource *res = b->resource[0]; - struct resource tmp_res; - unsigned long max; - int found_vga = 0; - - memset(&tmp_res, 0, sizeof(tmp_res)); - tmp_res.start = bus->resource[parent_io]->start; - - /* We don't let low addresses go through that closed P2P bridge, well, - * that may not be necessary but I feel safer that way - */ - if (tmp_res.start == 0) - tmp_res.start = 0x1000; - - if (!list_empty(&b->devices) && res && res->flags == 0 && - res != bus->resource[parent_io] && - (d->class >> 8) == PCI_CLASS_BRIDGE_PCI && - check_for_io_childs(b, &tmp_res, &found_vga)) { - u8 io_base_lo; - - printk(KERN_INFO "Fixing up IO bus %s\n", b->name); - - if (found_vga) { - if (has_vga) { - printk(KERN_WARNING "Skipping VGA, already active" - " on bus segment\n"); - found_vga = 0; - } else - has_vga = 1; - } - pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo); - - if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) - max = ((unsigned long) hose->io_base_virt - - isa_io_base) + 0xffffffff; - else - max = ((unsigned long) hose->io_base_virt - - isa_io_base) + 0xffff; - - *res = tmp_res; - res->flags = IORESOURCE_IO; - res->name = b->name; - - /* Find a resource in the parent where we can allocate */ - for (i = 0 ; i < 4; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - if ((r->flags & IORESOURCE_IO) == 0) - continue; - DBG("Trying to allocate from %08lx, size %08lx from parent" - " res %d: %08lx -> %08lx\n", - res->start, res->end, i, r->start, r->end); - - if (allocate_resource(r, res, res->end + 1, res->start, max, - res->end + 1, NULL, NULL) < 0) { - DBG("Failed !\n"); - continue; - } - do_update_p2p_io_resource(b, found_vga); - break; - } - } - do_fixup_p2p_level(b); - } -} - -static void -pcibios_fixup_p2p_bridges(void) -{ - struct pci_bus *b; - - list_for_each_entry(b, &pci_root_buses, node) - do_fixup_p2p_level(b); -} - -#endif /* CONFIG_PPC_PMAC */ - static int __init pcibios_init(void) { @@ -1290,9 +1068,6 @@ pcibios_init(void) pcibios_allocate_bus_resources(&pci_root_buses); pcibios_allocate_resources(0); pcibios_allocate_resources(1); -#ifdef CONFIG_PPC_PMAC - pcibios_fixup_p2p_bridges(); -#endif /* CONFIG_PPC_PMAC */ pcibios_assign_resources(); /* Call machine dependent post-init code */ @@ -1722,17 +1497,6 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) struct pci_controller* hose; long result = -EOPNOTSUPP; - /* Argh ! Please forgive me for that hack, but that's the - * simplest way to get existing XFree to not lockup on some - * G5 machines... So when something asks for bus 0 io base - * (bus 0 is HT root), we return the AGP one instead. - */ -#ifdef CONFIG_PPC_PMAC - if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4")) - if (bus == 0) - bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ - hose = pci_bus_to_hose(bus); if (!hose) return -ENODEV; diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index fb0da7c209..3a6e4bcb3c 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include @@ -58,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); long long __ashrdi3(long long, int); @@ -213,10 +211,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_PMAC -EXPORT_SYMBOL(sys_ctrler); -EXPORT_SYMBOL(pmac_newworld); -#endif #ifdef CONFIG_PPC_OF EXPORT_SYMBOL(find_devices); EXPORT_SYMBOL(find_type_devices); @@ -241,9 +235,6 @@ EXPORT_SYMBOL(of_node_put); #if defined(CONFIG_BOOTX_TEXT) EXPORT_SYMBOL(btext_update_display); #endif -#if defined(CONFIG_SCSI) && defined(CONFIG_PPC_PMAC) -EXPORT_SYMBOL(note_scsi_host); -#endif #ifdef CONFIG_VT EXPORT_SYMBOL(kd_mksound); #endif diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index e707c6f6e6..c08ab432e9 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/pmac/chrp boot and setup code. + * Common prep/chrp boot and setup code. */ #include @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -55,7 +54,6 @@ extern void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void bootx_init(unsigned long r4, unsigned long phys); extern void identify_cpu(unsigned long offset, unsigned long cpu); extern void do_cpu_ftr_fixups(unsigned long offset); extern void reloc_got2(unsigned long offset); @@ -80,8 +78,6 @@ EXPORT_SYMBOL(_machine); extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void pmac_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); extern void chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); @@ -324,20 +320,15 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_MULTIPLATFORM) +#if defined(CONFIG_PPC_OF) reloc_got2(offset); - /* If we came here from BootX, clear the screen, - * set up some pointers and return. */ - if ((r3 == 0x426f6f58) && (r5 == 0)) - bootx_init(r4, phys); - /* * don't do anything on prep * for now, don't use bootinfo because it breaks yaboot 0.5 * and assume that if we didn't find a magic number, we have OF */ - else if (*(unsigned long *)(0) != 0xdeadc0de) + if (*(unsigned long *)(0) != 0xdeadc0de) phys = prom_init(r3, r4, (prom_entry)r5); reloc_got2(-offset); @@ -424,6 +415,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, } #endif +#ifdef CONFIG_PPC_OF have_of = 1; /* prom_init has already been called from __start */ @@ -495,19 +487,17 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #endif /* CONFIG_ADB */ switch (_machine) { -#ifdef CONFIG_PPC_PMAC - case _MACH_Pmac: - pmac_init(r3, r4, r5, r6, r7); - break; -#endif #ifdef CONFIG_PPC_CHRP case _MACH_chrp: chrp_init(r3, r4, r5, r6, r7); break; #endif } +#endif /* CONFIG_PPC_OF */ } +#endif /* CONFIG_PPC_MULTIPLATFORM */ +#ifdef CONFIG_PPC_OF #ifdef CONFIG_SERIAL_CORE_CONSOLE extern char *of_stdout_device; @@ -564,7 +554,7 @@ static int __init set_preferred_console(void) } console_initcall(set_preferred_console); #endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_OF */ struct bi_record *find_bootinfo(void) { @@ -747,14 +737,6 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.init_early) ppc_md.init_early(); -#ifdef CONFIG_PPC_MULTIPLATFORM - /* This could be called "early setup arch", it must be done - * now because xmon need it - */ - if (_machine == _MACH_Pmac) - pmac_feature_init(); /* New cool way */ -#endif - #ifdef CONFIG_XMON xmon_init(1); if (strstr(cmd_line, "xmon")) diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 9dbc4d28fa..6d0a1838d9 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -38,9 +38,6 @@ #include #include #include -#ifdef CONFIG_PMAC_BACKLIGHT -#include -#endif #include #ifdef CONFIG_XMON @@ -85,12 +82,6 @@ int die(const char * str, struct pt_regs * fp, long err) int nl = 0; console_verbose(); spin_lock_irq(&die_lock); -#ifdef CONFIG_PMAC_BACKLIGHT - if (_machine == _MACH_Pmac) { - set_backlight_enable(1); - set_backlight_level(BACKLIGHT_MAX); - } -#endif printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); #ifdef CONFIG_PREEMPT printk("PREEMPT "); @@ -159,7 +150,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) */ static inline int check_io_access(struct pt_regs *regs) { -#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx +#if defined CONFIG_8xx unsigned long msr = regs->msr; const struct exception_table_entry *entry; unsigned int *nip = (unsigned int *)regs->nip; @@ -196,7 +187,7 @@ static inline int check_io_access(struct pt_regs *regs) return 1; } } -#endif /* CONFIG_PPC_PMAC */ +#endif /* CONFIG_8xx */ return 0; } diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 45f0782059..134db5c042 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -67,10 +67,6 @@ unsigned long ppc_memoffset = PAGE_OFFSET; int mem_init_done; int init_bootmem_done; int boot_mapsize; -#ifdef CONFIG_PPC_PMAC -unsigned long agp_special_page; -EXPORT_SYMBOL(agp_special_page); -#endif extern char _end[]; extern char etext[], _stext[]; @@ -423,10 +419,6 @@ void __init mem_init(void) addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ; addr += PAGE_SIZE) SetPageReserved(virt_to_page(addr)); -#endif -#ifdef CONFIG_PPC_PMAC - if (agp_special_page) - SetPageReserved(virt_to_page(agp_special_page)); #endif for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; addr += PAGE_SIZE) { @@ -463,11 +455,6 @@ void __init mem_init(void) initpages<< (PAGE_SHIFT-10), (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); -#ifdef CONFIG_PPC_PMAC - if (agp_special_page) - printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page); -#endif - mem_init_done = 1; } @@ -512,22 +499,6 @@ set_phys_avail(unsigned long total_memory) if (rtas_data) mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); #endif -#ifdef CONFIG_PPC_PMAC - /* Because of some uninorth weirdness, we need a page of - * memory as high as possible (it must be outside of the - * bus address seen as the AGP aperture). It will be used - * by the r128 DRM driver - * - * FIXME: We need to make sure that page doesn't overlap any of the\ - * above. This could be done by improving mem_pieces_find to be able - * to do a backward search from the end of the list. - */ - if (_machine == _MACH_Pmac && find_devices("uni-north-agp")) { - agp_special_page = (total_memory - PAGE_SIZE); - mem_pieces_remove(&phys_avail, agp_special_page, PAGE_SIZE, 0); - agp_special_page = (unsigned long)__va(agp_special_page); - } -#endif /* CONFIG_PPC_PMAC */ } /* Mark some memory as reserved by removing it from phys_avail. */ diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 7c5cdabf6f..51430e294b 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -3,26 +3,18 @@ # # Extra CFLAGS so we don't have to do relative includes -CFLAGS_pmac_setup.o += -Iarch/$(ARCH)/mm +CFLAGS_chrp_setup.o += -Iarch/$(ARCH)/mm obj-$(CONFIG_APUS) += apus_setup.o ifeq ($(CONFIG_APUS),y) obj-$(CONFIG_PCI) += apus_pci.o endif -obj-$(CONFIG_PPC_PMAC) += pmac_pic.o pmac_setup.o pmac_time.o \ - pmac_feature.o pmac_pci.o pmac_sleep.o \ - pmac_low_i2c.o pmac_cache.o obj-$(CONFIG_PPC_CHRP) += chrp_setup.o chrp_time.o chrp_pci.o \ chrp_pegasos_eth.o ifeq ($(CONFIG_PPC_CHRP),y) obj-$(CONFIG_NVRAM) += chrp_nvram.o endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o -ifeq ($(CONFIG_PPC_PMAC),y) -obj-$(CONFIG_NVRAM) += pmac_nvram.o -obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpufreq.o -endif -obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o obj-$(CONFIG_TQM8260) += tqm8260_setup.o @@ -47,6 +39,5 @@ obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o ifeq ($(CONFIG_SMP),y) -obj-$(CONFIG_PPC_PMAC) += pmac_smp.o obj-$(CONFIG_PPC_CHRP) += chrp_smp.o endif diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c index bd047aac01..c7fe6182bb 100644 --- a/arch/ppc/platforms/chrp_pci.c +++ b/arch/ppc/platforms/chrp_pci.c @@ -275,7 +275,7 @@ chrp_find_bridges(void) setup_python(hose, dev); } else if (is_mot || strncmp(model, "Motorola, Grackle", 17) == 0) { - setup_grackle(hose); + setup_indirect_pci(hose, 0xfec00000, 0xfee00000); } else if (is_longtrail) { void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); hose->ops = &gg2_pci_ops; diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c index 056ac2a7b5..48996b7873 100644 --- a/arch/ppc/platforms/chrp_setup.c +++ b/arch/ppc/platforms/chrp_setup.c @@ -53,6 +53,7 @@ #include #include #include +#include "mem_pieces.h" unsigned long chrp_get_rtc_time(void); int chrp_set_rtc_time(unsigned long nowtime); @@ -65,7 +66,6 @@ void rtas_display_progress(char *, unsigned short); void rtas_indicator_progress(char *, unsigned short); void btext_progress(char *, unsigned short); -extern unsigned long pmac_find_end_of_memory(void); extern int of_show_percpuinfo(struct seq_file *, int); int _chrp_type; @@ -467,6 +467,75 @@ chrp_init2(void) ppc_md.progress(" Have fun! ", 0x7777); } +static struct device_node *memory_node; + +static int __init get_mem_prop(char *name, struct mem_pieces *mp) +{ + struct reg_property *rp; + int i, s; + unsigned int *ip; + int nac = prom_n_addr_cells(memory_node); + int nsc = prom_n_size_cells(memory_node); + + ip = (unsigned int *) get_property(memory_node, name, &s); + if (ip == NULL) { + printk(KERN_ERR "error: couldn't get %s property on /memory\n", + name); + return 0; + } + s /= (nsc + nac) * 4; + rp = mp->regions; + for (i = 0; i < s; ++i, ip += nac+nsc) { + if (nac >= 2 && ip[nac-2] != 0) + continue; + rp->address = ip[nac-1]; + if (nsc >= 2 && ip[nac+nsc-2] != 0) + rp->size = ~0U; + else + rp->size = ip[nac+nsc-1]; + ++rp; + } + mp->n_regions = rp - mp->regions; + + /* Make sure the pieces are sorted. */ + mem_pieces_sort(mp); + mem_pieces_coalesce(mp); + return 1; +} + +static unsigned long __init chrp_find_end_of_memory(void) +{ + unsigned long a, total; + struct mem_pieces phys_mem; + + /* + * Find out where physical memory is, and check that it + * starts at 0 and is contiguous. It seems that RAM is + * always physically contiguous on Power Macintoshes. + * + * Supporting discontiguous physical memory isn't hard, + * it just makes the virtual <-> physical mapping functions + * more complicated (or else you end up wasting space + * in mem_map). + */ + memory_node = find_devices("memory"); + if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) + || phys_mem.n_regions == 0) + panic("No RAM??"); + a = phys_mem.regions[0].address; + if (a != 0) + panic("RAM doesn't start at physical address 0"); + total = phys_mem.regions[0].size; + + if (phys_mem.n_regions > 1) { + printk("RAM starting at 0x%x is not contiguous\n", + phys_mem.regions[1].address); + printk("Using RAM from 0 to 0x%lx\n", total-1); + } + + return total; +} + void __init chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) @@ -525,7 +594,7 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.get_rtc_time = chrp_get_rtc_time; ppc_md.calibrate_decr = chrp_calibrate_decr; - ppc_md.find_end_of_memory = pmac_find_end_of_memory; + ppc_md.find_end_of_memory = chrp_find_end_of_memory; if (rtas_data) { struct device_node *rtas; diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c index 29d074c305..57753a55b5 100644 --- a/arch/ppc/platforms/chrp_time.c +++ b/arch/ppc/platforms/chrp_time.c @@ -163,13 +163,75 @@ unsigned long chrp_get_rtc_time(void) return mktime(year, mon, day, hour, min, sec); } +/* + * Calibrate the decrementer frequency with the VIA timer 1. + */ +#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ + +/* VIA registers */ +#define RS 0x200 /* skip between registers */ +#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ +#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ +#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ +#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ +#define ACR (11*RS) /* Auxiliary control register */ +#define IFR (13*RS) /* Interrupt flag register */ + +/* Bits in ACR */ +#define T1MODE 0xc0 /* Timer 1 mode */ +#define T1MODE_CONT 0x40 /* continuous interrupts */ + +/* Bits in IFR and IER */ +#define T1_INT 0x40 /* Timer 1 interrupt */ + +static int __init chrp_via_calibrate_decr(void) +{ + struct device_node *vias; + volatile unsigned char __iomem *via; + int count = VIA_TIMER_FREQ_6 / 100; + unsigned int dstart, dend; + + vias = find_devices("via-cuda"); + if (vias == 0) + vias = find_devices("via"); + if (vias == 0 || vias->n_addrs == 0) + return 0; + via = ioremap(vias->addrs[0].address, vias->addrs[0].size); + + /* set timer 1 for continuous interrupts */ + out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); + /* set the counter to a small value */ + out_8(&via[T1CH], 2); + /* set the latch to `count' */ + out_8(&via[T1LL], count); + out_8(&via[T1LH], count >> 8); + /* wait until it hits 0 */ + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dstart = get_dec(); + /* clear the interrupt & wait until it hits 0 again */ + in_8(&via[T1CL]); + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dend = get_dec(); + + tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); + tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); + + printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", + tb_ticks_per_jiffy, dstart - dend); + + iounmap(via); + + return 1; +} void __init chrp_calibrate_decr(void) { struct device_node *cpu; unsigned int freq, *fp; - if (via_calibrate_decr()) + if (chrp_via_calibrate_decr()) return; /* diff --git a/arch/ppc/platforms/pmac_backlight.c b/arch/ppc/platforms/pmac_backlight.c deleted file mode 100644 index 8be2f7d071..0000000000 --- a/arch/ppc/platforms/pmac_backlight.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Miscellaneous procedures for dealing with the PowerMac hardware. - * Contains support for the backlight. - * - * Copyright (C) 2000 Benjamin Herrenschmidt - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -static struct backlight_controller *backlighter; -static void* backlighter_data; -static int backlight_autosave; -static int backlight_level = BACKLIGHT_MAX; -static int backlight_enabled = 1; -static int backlight_req_level = -1; -static int backlight_req_enable = -1; - -static void backlight_callback(void *); -static DECLARE_WORK(backlight_work, backlight_callback, NULL); - -void register_backlight_controller(struct backlight_controller *ctrler, - void *data, char *type) -{ - struct device_node* bk_node; - char *prop; - int valid = 0; - - /* There's already a matching controller, bail out */ - if (backlighter != NULL) - return; - - bk_node = find_devices("backlight"); - -#ifdef CONFIG_ADB_PMU - /* Special case for the old PowerBook since I can't test on it */ - backlight_autosave = machine_is_compatible("AAPL,3400/2400") - || machine_is_compatible("AAPL,3500"); - if ((backlight_autosave - || machine_is_compatible("AAPL,PowerBook1998") - || machine_is_compatible("PowerBook1,1")) - && !strcmp(type, "pmu")) - valid = 1; -#endif - if (bk_node) { - prop = get_property(bk_node, "backlight-control", NULL); - if (prop && !strncmp(prop, type, strlen(type))) - valid = 1; - } - if (!valid) - return; - backlighter = ctrler; - backlighter_data = data; - - if (bk_node && !backlight_autosave) - prop = get_property(bk_node, "bklt", NULL); - else - prop = NULL; - if (prop) { - backlight_level = ((*prop)+1) >> 1; - if (backlight_level > BACKLIGHT_MAX) - backlight_level = BACKLIGHT_MAX; - } - -#ifdef CONFIG_ADB_PMU - if (backlight_autosave) { - struct adb_request req; - pmu_request(&req, NULL, 2, 0xd9, 0); - while (!req.complete) - pmu_poll(); - backlight_level = req.reply[0] >> 4; - } -#endif - acquire_console_sem(); - if (!backlighter->set_enable(1, backlight_level, data)) - backlight_enabled = 1; - release_console_sem(); - - printk(KERN_INFO "Registered \"%s\" backlight controller," - "level: %d/15\n", type, backlight_level); -} -EXPORT_SYMBOL(register_backlight_controller); - -void unregister_backlight_controller(struct backlight_controller - *ctrler, void *data) -{ - /* We keep the current backlight level (for now) */ - if (ctrler == backlighter && data == backlighter_data) - backlighter = NULL; -} -EXPORT_SYMBOL(unregister_backlight_controller); - -static int __set_backlight_enable(int enable) -{ - int rc; - - if (!backlighter) - return -ENODEV; - acquire_console_sem(); - rc = backlighter->set_enable(enable, backlight_level, - backlighter_data); - if (!rc) - backlight_enabled = enable; - release_console_sem(); - return rc; -} -int set_backlight_enable(int enable) -{ - if (!backlighter) - return -ENODEV; - backlight_req_enable = enable; - schedule_work(&backlight_work); - return 0; -} - -EXPORT_SYMBOL(set_backlight_enable); - -int get_backlight_enable(void) -{ - if (!backlighter) - return -ENODEV; - return backlight_enabled; -} -EXPORT_SYMBOL(get_backlight_enable); - -static int __set_backlight_level(int level) -{ - int rc = 0; - - if (!backlighter) - return -ENODEV; - if (level < BACKLIGHT_MIN) - level = BACKLIGHT_OFF; - if (level > BACKLIGHT_MAX) - level = BACKLIGHT_MAX; - acquire_console_sem(); - if (backlight_enabled) - rc = backlighter->set_level(level, backlighter_data); - if (!rc) - backlight_level = level; - release_console_sem(); - if (!rc && !backlight_autosave) { - level <<=1; - if (level & 0x10) - level |= 0x01; - // -- todo: save to property "bklt" - } - return rc; -} -int set_backlight_level(int level) -{ - if (!backlighter) - return -ENODEV; - backlight_req_level = level; - schedule_work(&backlight_work); - return 0; -} - -EXPORT_SYMBOL(set_backlight_level); - -int get_backlight_level(void) -{ - if (!backlighter) - return -ENODEV; - return backlight_level; -} -EXPORT_SYMBOL(get_backlight_level); - -static void backlight_callback(void *dummy) -{ - int level, enable; - - do { - level = backlight_req_level; - enable = backlight_req_enable; - mb(); - - if (level >= 0) - __set_backlight_level(level); - if (enable >= 0) - __set_backlight_enable(enable); - } while(cmpxchg(&backlight_req_level, level, -1) != level || - cmpxchg(&backlight_req_enable, enable, -1) != enable); -} diff --git a/arch/ppc/platforms/pmac_cache.S b/arch/ppc/platforms/pmac_cache.S deleted file mode 100644 index fb977de6b7..0000000000 --- a/arch/ppc/platforms/pmac_cache.S +++ /dev/null @@ -1,359 +0,0 @@ -/* - * This file contains low-level cache management functions - * used for sleep and CPU speed changes on Apple machines. - * (In fact the only thing that is Apple-specific is that we assume - * that we can read from ROM at physical address 0xfff00000.) - * - * Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and - * Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include - -/* - * Flush and disable all data caches (dL1, L2, L3). This is used - * when going to sleep, when doing a PMU based cpufreq transition, - * or when "offlining" a CPU on SMP machines. This code is over - * paranoid, but I've had enough issues with various CPU revs and - * bugs that I decided it was worth beeing over cautious - */ - -_GLOBAL(flush_disable_caches) -#ifndef CONFIG_6xx - blr -#else -BEGIN_FTR_SECTION - b flush_disable_745x -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) -BEGIN_FTR_SECTION - b flush_disable_75x -END_FTR_SECTION_IFSET(CPU_FTR_L2CR) - b __flush_disable_L1 - -/* This is the code for G3 and 74[01]0 */ -flush_disable_75x: - mflr r10 - - /* Turn off EE and DR in MSR */ - mfmsr r11 - rlwinm r0,r11,0,~MSR_EE - rlwinm r0,r0,0,~MSR_DR - sync - mtmsr r0 - isync - - /* Stop DST streams */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - - /* Stop DPM */ - mfspr r8,SPRN_HID0 /* Save SPRN_HID0 in r8 */ - rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ - sync - mtspr SPRN_HID0,r4 /* Disable DPM */ - sync - - /* Disp-flush L1. We have a weird problem here that I never - * totally figured out. On 750FX, using the ROM for the flush - * results in a non-working flush. We use that workaround for - * now until I finally understand what's going on. --BenH - */ - - /* ROM base by default */ - lis r4,0xfff0 - mfpvr r3 - srwi r3,r3,16 - cmplwi cr0,r3,0x7000 - bne+ 1f - /* RAM base on 750FX */ - li r4,0 -1: li r4,0x4000 - mtctr r4 -1: lwz r0,0(r4) - addi r4,r4,32 - bdnz 1b - sync - isync - - /* Disable / invalidate / enable L1 data */ - mfspr r3,SPRN_HID0 - rlwinm r3,r3,0,~(HID0_DCE | HID0_ICE) - mtspr SPRN_HID0,r3 - sync - isync - ori r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI) - sync - isync - mtspr SPRN_HID0,r3 - xori r3,r3,(HID0_DCI|HID0_ICFI) - mtspr SPRN_HID0,r3 - sync - - /* Get the current enable bit of the L2CR into r4 */ - mfspr r5,SPRN_L2CR - /* Set to data-only (pre-745x bit) */ - oris r3,r5,L2CR_L2DO@h - b 2f - /* When disabling L2, code must be in L1 */ - .balign 32 -1: mtspr SPRN_L2CR,r3 -3: sync - isync - b 1f -2: b 3f -3: sync - isync - b 1b -1: /* disp-flush L2. The interesting thing here is that the L2 can be - * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory - * but that is probbaly fine. We disp-flush over 4Mb to be safe - */ - lis r4,2 - mtctr r4 - lis r4,0xfff0 -1: lwz r0,0(r4) - addi r4,r4,32 - bdnz 1b - sync - isync - lis r4,2 - mtctr r4 - lis r4,0xfff0 -1: dcbf 0,r4 - addi r4,r4,32 - bdnz 1b - sync - isync - - /* now disable L2 */ - rlwinm r5,r5,0,~L2CR_L2E - b 2f - /* When disabling L2, code must be in L1 */ - .balign 32 -1: mtspr SPRN_L2CR,r5 -3: sync - isync - b 1f -2: b 3f -3: sync - isync - b 1b -1: sync - isync - /* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */ - oris r4,r5,L2CR_L2I@h - mtspr SPRN_L2CR,r4 - sync - isync - - /* Wait for the invalidation to complete */ -1: mfspr r3,SPRN_L2CR - rlwinm. r0,r3,0,31,31 - bne 1b - - /* Clear L2I */ - xoris r4,r4,L2CR_L2I@h - sync - mtspr SPRN_L2CR,r4 - sync - - /* now disable the L1 data cache */ - mfspr r0,SPRN_HID0 - rlwinm r0,r0,0,~(HID0_DCE|HID0_ICE) - mtspr SPRN_HID0,r0 - sync - isync - - /* Restore HID0[DPM] to whatever it was before */ - sync - mfspr r0,SPRN_HID0 - rlwimi r0,r8,0,11,11 /* Turn back HID0[DPM] */ - mtspr SPRN_HID0,r0 - sync - - /* restore DR and EE */ - sync - mtmsr r11 - isync - - mtlr r10 - blr - -/* This code is for 745x processors */ -flush_disable_745x: - /* Turn off EE and DR in MSR */ - mfmsr r11 - rlwinm r0,r11,0,~MSR_EE - rlwinm r0,r0,0,~MSR_DR - sync - mtmsr r0 - isync - - /* Stop prefetch streams */ - DSSALL - sync - - /* Disable L2 prefetching */ - mfspr r0,SPRN_MSSCR0 - rlwinm r0,r0,0,0,29 - mtspr SPRN_MSSCR0,r0 - sync - isync - lis r4,0 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - - /* Due to a bug with the HW flush on some CPU revs, we occasionally - * experience data corruption. I'm adding a displacement flush along - * with a dcbf loop over a few Mb to "help". The problem isn't totally - * fixed by this in theory, but at least, in practice, I couldn't reproduce - * it even with a big hammer... - */ - - lis r4,0x0002 - mtctr r4 - li r4,0 -1: - lwz r0,0(r4) - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - isync - - /* Now, flush the first 4MB of memory */ - lis r4,0x0002 - mtctr r4 - li r4,0 - sync -1: - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - - /* Flush and disable the L1 data cache */ - mfspr r6,SPRN_LDSTCR - lis r3,0xfff0 /* read from ROM for displacement flush */ - li r4,0xfe /* start with only way 0 unlocked */ - li r5,128 /* 128 lines in each way */ -1: mtctr r5 - rlwimi r6,r4,0,24,31 - mtspr SPRN_LDSTCR,r6 - sync - isync -2: lwz r0,0(r3) /* touch each cache line */ - addi r3,r3,32 - bdnz 2b - rlwinm r4,r4,1,24,30 /* move on to the next way */ - ori r4,r4,1 - cmpwi r4,0xff /* all done? */ - bne 1b - /* now unlock the L1 data cache */ - li r4,0 - rlwimi r6,r4,0,24,31 - sync - mtspr SPRN_LDSTCR,r6 - sync - isync - - /* Flush the L2 cache using the hardware assist */ - mfspr r3,SPRN_L2CR - cmpwi r3,0 /* check if it is enabled first */ - bge 4f - oris r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h - b 2f - /* When disabling/locking L2, code must be in L1 */ - .balign 32 -1: mtspr SPRN_L2CR,r0 /* lock the L2 cache */ -3: sync - isync - b 1f -2: b 3f -3: sync - isync - b 1b -1: sync - isync - ori r0,r3,L2CR_L2HWF_745x - sync - mtspr SPRN_L2CR,r0 /* set the hardware flush bit */ -3: mfspr r0,SPRN_L2CR /* wait for it to go to 0 */ - andi. r0,r0,L2CR_L2HWF_745x - bne 3b - sync - rlwinm r3,r3,0,~L2CR_L2E - b 2f - /* When disabling L2, code must be in L1 */ - .balign 32 -1: mtspr SPRN_L2CR,r3 /* disable the L2 cache */ -3: sync - isync - b 1f -2: b 3f -3: sync - isync - b 1b -1: sync - isync - oris r4,r3,L2CR_L2I@h - mtspr SPRN_L2CR,r4 - sync - isync -1: mfspr r4,SPRN_L2CR - andis. r0,r4,L2CR_L2I@h - bne 1b - sync - -BEGIN_FTR_SECTION - /* Flush the L3 cache using the hardware assist */ -4: mfspr r3,SPRN_L3CR - cmpwi r3,0 /* check if it is enabled */ - bge 6f - oris r0,r3,L3CR_L3IO@h - ori r0,r0,L3CR_L3DO - sync - mtspr SPRN_L3CR,r0 /* lock the L3 cache */ - sync - isync - ori r0,r0,L3CR_L3HWF - sync - mtspr SPRN_L3CR,r0 /* set the hardware flush bit */ -5: mfspr r0,SPRN_L3CR /* wait for it to go to zero */ - andi. r0,r0,L3CR_L3HWF - bne 5b - rlwinm r3,r3,0,~L3CR_L3E - sync - mtspr SPRN_L3CR,r3 /* disable the L3 cache */ - sync - ori r4,r3,L3CR_L3I - mtspr SPRN_L3CR,r4 -1: mfspr r4,SPRN_L3CR - andi. r0,r4,L3CR_L3I - bne 1b - sync -END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - -6: mfspr r0,SPRN_HID0 /* now disable the L1 data cache */ - rlwinm r0,r0,0,~HID0_DCE - mtspr SPRN_HID0,r0 - sync - isync - mtmsr r11 /* restore DR and EE */ - isync - blr -#endif /* CONFIG_6xx */ diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c deleted file mode 100644 index fba7e4d7c0..0000000000 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ /dev/null @@ -1,735 +0,0 @@ -/* - * arch/ppc/platforms/pmac_cpufreq.c - * - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt - * Copyright (C) 2004 John Steele Scott - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * TODO: Need a big cleanup here. Basically, we need to have different - * cpufreq_driver structures for the different type of HW instead of the - * current mess. We also need to better deal with the detection of the - * type of machine. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* WARNING !!! This will cause calibrate_delay() to be called, - * but this is an __init function ! So you MUST go edit - * init/main.c to make it non-init before enabling DEBUG_FREQ - */ -#undef DEBUG_FREQ - -/* - * There is a problem with the core cpufreq code on SMP kernels, - * it won't recalculate the Bogomips properly - */ -#ifdef CONFIG_SMP -#warning "WARNING, CPUFREQ not recommended on SMP kernels" -#endif - -extern void low_choose_7447a_dfs(int dfs); -extern void low_choose_750fx_pll(int pll); -extern void low_sleep_handler(void); - -/* - * Currently, PowerMac cpufreq supports only high & low frequencies - * that are set by the firmware - */ -static unsigned int low_freq; -static unsigned int hi_freq; -static unsigned int cur_freq; -static unsigned int sleep_freq; - -/* - * Different models uses different mecanisms to switch the frequency - */ -static int (*set_speed_proc)(int low_speed); -static unsigned int (*get_speed_proc)(void); - -/* - * Some definitions used by the various speedprocs - */ -static u32 voltage_gpio; -static u32 frequency_gpio; -static u32 slew_done_gpio; -static int no_schedule; -static int has_cpu_l2lve; -static int is_pmu_based; - -/* There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table pmac_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static inline void local_delay(unsigned long ms) -{ - if (no_schedule) - mdelay(ms); - else - msleep(ms); -} - -static inline void wakeup_decrementer(void) -{ - set_dec(tb_ticks_per_jiffy); - /* No currently-supported powerbook has a 601, - * so use get_tbl, not native - */ - last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); -} - -#ifdef DEBUG_FREQ -static inline void debug_calc_bogomips(void) -{ - /* This will cause a recalc of bogomips and display the - * result. We backup/restore the value to avoid affecting the - * core cpufreq framework's own calculation. - */ - extern void calibrate_delay(void); - - unsigned long save_lpj = loops_per_jiffy; - calibrate_delay(); - loops_per_jiffy = save_lpj; -} -#endif /* DEBUG_FREQ */ - -/* Switch CPU speed under 750FX CPU control - */ -static int cpu_750fx_cpu_speed(int low_speed) -{ - u32 hid2; - - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(10); - - /* tweak L2 for high voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 &= ~0x2000; - mtspr(SPRN_HID2, hid2); - } - } -#ifdef CONFIG_6xx - low_choose_750fx_pll(low_speed); -#endif - if (low_speed == 1) { - /* tweak L2 for low voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 |= 0x2000; - mtspr(SPRN_HID2, hid2); - } - - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(10); - } - - return 0; -} - -static unsigned int cpu_750fx_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_PS) - return low_freq; - else - return hi_freq; -} - -/* Switch CPU speed using DFS */ -static int dfs_set_cpu_speed(int low_speed) -{ - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(1); - } - - /* set frequency */ -#ifdef CONFIG_6xx - low_choose_7447a_dfs(low_speed); -#endif - udelay(100); - - if (low_speed == 1) { - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(1); - } - - return 0; -} - -static unsigned int dfs_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_DFS) - return low_freq; - else - return hi_freq; -} - - -/* Switch CPU speed using slewing GPIOs - */ -static int gpios_set_cpu_speed(int low_speed) -{ - int gpio, timeout = 0; - - /* If ramping up, set voltage first */ - if (low_speed == 0) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - - /* Set frequency */ - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - if (low_speed == ((gpio & 0x01) == 0)) - goto skip; - - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, - low_speed ? 0x04 : 0x05); - udelay(200); - do { - if (++timeout > 100) - break; - local_delay(1); - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); - } while((gpio & 0x02) == 0); - skip: - /* If ramping down, set voltage last */ - if (low_speed == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - return 0; -} - -/* Switch CPU speed under PMU control - */ -static int pmu_set_cpu_speed(int low_speed) -{ - struct adb_request req; - unsigned long save_l2cr; - unsigned long save_l3cr; - unsigned int pic_prio; - unsigned long flags; - - preempt_disable(); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif - pmu_suspend(); - - /* Disable all interrupt sources on openpic */ - pic_prio = openpic_get_priority(); - openpic_set_priority(0xf); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occuring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE */ - local_irq_save(flags); - - /* Giveup the FPU & vec */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - /* Save & disable L2 and L3 caches */ - save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ - save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ - - /* Send the new speed command. My assumption is that this command - * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep - */ - pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); - while (!req.complete) - pmu_poll(); - - /* Prepare the northbridge for the speed transition */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); - - /* Call low level code to backup CPU state and recover from - * hardware reset - */ - low_sleep_handler(); - - /* Restore the northbridge */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); - - /* Restore L2 cache */ - if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) - _set_L2CR(save_l2cr); - /* Restore L3 cache */ - if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) - _set_L3CR(save_l3cr); - - /* Restore userland MMU context */ - set_context(current->active_mm->context, current->active_mm->pgd); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); -#endif - - /* Restore low level PMU operations */ - pmu_unlock(); - - /* Restore decrementer */ - wakeup_decrementer(); - - /* Restore interrupts */ - openpic_set_priority(pic_prio); - - /* Let interrupts flow again ... */ - local_irq_restore(flags); - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - pmu_resume(); - - preempt_enable(); - - return 0; -} - -static int do_set_cpu_speed(int speed_mode, int notify) -{ - struct cpufreq_freqs freqs; - unsigned long l3cr; - static unsigned long prev_l3cr; - - freqs.old = cur_freq; - freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - freqs.cpu = smp_processor_id(); - - if (freqs.old == freqs.new) - return 0; - - if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == CPUFREQ_LOW && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if (l3cr & L3CR_L3E) { - prev_l3cr = l3cr; - _set_L3CR(0); - } - } - set_speed_proc(speed_mode == CPUFREQ_LOW); - if (speed_mode == CPUFREQ_HIGH && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) - _set_L3CR(prev_l3cr); - } - if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - return 0; -} - -static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) -{ - return cur_freq; -} - -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - -static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - return do_set_cpu_speed(newstate, 1); -} - -unsigned int pmac_get_one_cpufreq(int i) -{ - /* Supports only one CPU for now */ - return (i == 0) ? cur_freq : 0; -} - -static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -ENODEV; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); -} - -static u32 read_gpio(struct device_node *np) -{ - u32 *reg = (u32 *)get_property(np, "reg", NULL); - u32 offset; - - if (reg == NULL) - return 0; - /* That works for all keylargos but shall be fixed properly - * some day... The problem is that it seems we can't rely - * on the "reg" property of the GPIO nodes, they are either - * relative to the base of KeyLargo or to the base of the - * GPIO space, and the device-tree doesn't help. - */ - offset = *reg; - if (offset < KEYLARGO_GPIO_LEVELS0) - offset += KEYLARGO_GPIO_LEVELS0; - return offset; -} - -static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) -{ - /* Ok, this could be made a bit smarter, but let's be robust for now. We - * always force a speed change to high speed before sleep, to make sure - * we have appropriate voltage and/or bus speed for the wakeup process, - * and to make sure our loops_per_jiffies are "good enough", that is will - * not cause too short delays if we sleep in low speed and wake in high - * speed.. - */ - no_schedule = 1; - sleep_freq = cur_freq; - if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(CPUFREQ_HIGH, 0); - return 0; -} - -static int pmac_cpufreq_resume(struct cpufreq_policy *policy) -{ - /* If we resume, first check if we have a get() function */ - if (get_speed_proc) - cur_freq = get_speed_proc(); - else - cur_freq = 0; - - /* We don't, hrm... we don't really know our speed here, best - * is that we force a switch to whatever it was, which is - * probably high speed due to our suspend() routine - */ - do_set_cpu_speed(sleep_freq == low_freq ? - CPUFREQ_LOW : CPUFREQ_HIGH, 0); - - no_schedule = 0; - return 0; -} - -static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, - .get = pmac_cpufreq_get_speed, - .init = pmac_cpufreq_cpu_init, - .suspend = pmac_cpufreq_suspend, - .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, - .name = "powermac", - .owner = THIS_MODULE, -}; - - -static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np = of_find_node_by_name(NULL, - "voltage-gpio"); - struct device_node *freq_gpio_np = of_find_node_by_name(NULL, - "frequency-gpio"); - struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, - "slewing-done"); - u32 *value; - - /* - * Check to see if it's GPIO driven or PMU only - * - * The way we extract the GPIO address is slightly hackish, but it - * works well enough for now. We need to abstract the whole GPIO - * stuff sooner or later anyway - */ - - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (freq_gpio_np) - frequency_gpio = read_gpio(freq_gpio_np); - if (slew_done_gpio_np) - slew_done_gpio = read_gpio(slew_done_gpio_np); - - /* If we use the frequency GPIOs, calculate the min/max speeds based - * on the bus frequencies - */ - if (frequency_gpio && slew_done_gpio) { - int lenp, rc; - u32 *freqs, *ratio; - - freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp); - lenp /= sizeof(u32); - if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); - return 1; - } - ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL); - if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); - return 1; - } - - /* Get the min/max bus frequencies */ - low_freq = min(freqs[0], freqs[1]); - hi_freq = max(freqs[0], freqs[1]); - - /* Grrrr.. It _seems_ that the device-tree is lying on the low bus - * frequency, it claims it to be around 84Mhz on some models while - * it appears to be approx. 101Mhz on all. Let's hack around here... - * fortunately, we don't need to be too precise - */ - if (low_freq < 98000000) - low_freq = 101000000; - - /* Convert those to CPU core clocks */ - low_freq = (low_freq * (*ratio)) / 2000; - hi_freq = (hi_freq * (*ratio)) / 2000; - - /* Now we get the frequencies, we read the GPIO to see what is out current - * speed - */ - rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - cur_freq = (rc & 0x01) ? hi_freq : low_freq; - - set_speed_proc = gpios_set_cpu_speed; - return 1; - } - - /* If we use the PMU, look for the min & max frequencies in the - * device-tree - */ - value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree - * here */ - if (low_freq < 100000) - low_freq *= 10; - - value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL); - if (!value) - return 1; - hi_freq = (*value) / 1000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - - return 0; -} - -static int pmac_cpufreq_init_7447A(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); - return 1; - } - - /* OF only reports the high frequency */ - hi_freq = cur_freq; - low_freq = cur_freq/2; - - /* Read actual frequency from CPU */ - cur_freq = dfs_get_cpu_speed(); - set_speed_proc = dfs_set_cpu_speed; - get_speed_proc = dfs_get_cpu_speed; - - return 0; -} - -static int pmac_cpufreq_init_750FX(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - u32 pvr, *value; - - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - hi_freq = cur_freq; - value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - - pvr = mfspr(SPRN_PVR); - has_cpu_l2lve = !((pvr & 0xf00) == 0x100); - - set_speed_proc = cpu_750fx_cpu_speed; - get_speed_proc = cpu_750fx_get_cpu_speed; - cur_freq = cpu_750fx_get_cpu_speed(); - - return 0; -} - -/* Currently, we support the following machines: - * - * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) - * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) - * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) - * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) - * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) - * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) - * - Recent MacRISC3 laptops - * - All new machines with 7447A CPUs - */ -static int __init pmac_cpufreq_setup(void) -{ - struct device_node *cpunode; - u32 *value; - - if (strstr(cmd_line, "nocpufreq")) - return 0; - - /* Assume only one CPU */ - cpunode = find_type_devices("cpu"); - if (!cpunode) - goto out; - - /* Get current cpu clock freq */ - value = (u32 *)get_property(cpunode, "clock-frequency", NULL); - if (!value) - goto out; - cur_freq = (*value) / 1000; - - /* Check for 7447A based MacRISC3 */ - if (machine_is_compatible("MacRISC3") && - get_property(cpunode, "dynamic-power-step", NULL) && - PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { - pmac_cpufreq_init_7447A(cpunode); - /* Check for other MacRISC3 machines */ - } else if (machine_is_compatible("PowerBook3,4") || - machine_is_compatible("PowerBook3,5") || - machine_is_compatible("MacRISC3")) { - pmac_cpufreq_init_MacRISC3(cpunode); - /* Else check for iBook2 500/600 */ - } else if (machine_is_compatible("PowerBook4,1")) { - hi_freq = cur_freq; - low_freq = 400000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 550 */ - else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { - hi_freq = cur_freq; - low_freq = 500000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 400 & 500 */ - else if (machine_is_compatible("PowerBook3,2")) { - /* We only know about the 400 MHz and the 500Mhz model - * they both have 300 MHz as low frequency - */ - if (cur_freq < 350000 || cur_freq > 550000) - goto out; - hi_freq = cur_freq; - low_freq = 300000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) - pmac_cpufreq_init_750FX(cpunode); -out: - if (set_speed_proc == NULL) - return -ENODEV; - - pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; - pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; - - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); - - return cpufreq_register_driver(&pmac_cpufreq_driver); -} - -module_init(pmac_cpufreq_setup); - diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c deleted file mode 100644 index 6b7b3a1506..0000000000 --- a/arch/ppc/platforms/pmac_feature.c +++ /dev/null @@ -1,3023 +0,0 @@ -/* - * arch/ppc/platforms/pmac_feature.c - * - * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) - * Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * TODO: - * - * - Replace mdelay with some schedule loop if possible - * - Shorten some obfuscated delays on some routines (like modem - * power) - * - Refcount some clocks (see darwin) - * - Split split split... - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG_FEATURE - -#ifdef DEBUG_FEATURE -#define DBG(fmt,...) printk(KERN_DEBUG fmt) -#else -#define DBG(fmt,...) -#endif - -#ifdef CONFIG_6xx -extern int powersave_lowspeed; -#endif - -extern int powersave_nap; -extern struct device_node *k2_skiplist[2]; - - -/* - * We use a single global lock to protect accesses. Each driver has - * to take care of its own locking - */ -static DEFINE_SPINLOCK(feature_lock); - -#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); -#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); - - -/* - * Instance of some macio stuffs - */ -struct macio_chip macio_chips[MAX_MACIO_CHIPS]; - -struct macio_chip* macio_find(struct device_node* child, int type) -{ - while(child) { - int i; - - for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) - if (child == macio_chips[i].of_node && - (!type || macio_chips[i].type == type)) - return &macio_chips[i]; - child = child->parent; - } - return NULL; -} -EXPORT_SYMBOL_GPL(macio_find); - -static const char* macio_names[] = -{ - "Unknown", - "Grand Central", - "OHare", - "OHareII", - "Heathrow", - "Gatwick", - "Paddington", - "Keylargo", - "Pangea", - "Intrepid", - "K2" -}; - - - -/* - * Uninorth reg. access. Note that Uni-N regs are big endian - */ - -#define UN_REG(r) (uninorth_base + ((r) >> 2)) -#define UN_IN(r) (in_be32(UN_REG(r))) -#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) -#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) -#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) - -static struct device_node* uninorth_node; -static u32 __iomem * uninorth_base; -static u32 uninorth_rev; -static int uninorth_u3; -static void __iomem *u3_ht; - -/* - * For each motherboard family, we have a table of functions pointers - * that handle the various features. - */ - -typedef long (*feature_call)(struct device_node* node, long param, long value); - -struct feature_table_entry { - unsigned int selector; - feature_call function; -}; - -struct pmac_mb_def -{ - const char* model_string; - const char* model_name; - int model_id; - struct feature_table_entry* features; - unsigned long board_flags; -}; -static struct pmac_mb_def pmac_mb; - -/* - * Here are the chip specific feature functions - */ - -static inline int -simple_feature_tweak(struct device_node* node, int type, int reg, u32 mask, int value) -{ - struct macio_chip* macio; - unsigned long flags; - - macio = macio_find(node, type); - if (!macio) - return -ENODEV; - LOCK(flags); - if (value) - MACIO_BIS(reg, mask); - else - MACIO_BIC(reg, mask); - (void)MACIO_IN32(reg); - UNLOCK(flags); - - return 0; -} - -#ifndef CONFIG_POWER4 - -static long -ohare_htw_scc_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long chan_mask; - unsigned long fcr; - unsigned long flags; - int htw, trans; - unsigned long rmask; - - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - if (!strcmp(node->name, "ch-a")) - chan_mask = MACIO_FLAG_SCCA_ON; - else if (!strcmp(node->name, "ch-b")) - chan_mask = MACIO_FLAG_SCCB_ON; - else - return -ENODEV; - - htw = (macio->type == macio_heathrow || macio->type == macio_paddington - || macio->type == macio_gatwick); - /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ - trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && - pmac_mb.model_id != PMAC_TYPE_YIKES); - if (value) { -#ifdef CONFIG_ADB_PMU - if ((param & 0xfff) == PMAC_SCC_IRDA) - pmu_enable_irled(1); -#endif /* CONFIG_ADB_PMU */ - LOCK(flags); - fcr = MACIO_IN32(OHARE_FCR); - /* Check if scc cell need enabling */ - if (!(fcr & OH_SCC_ENABLE)) { - fcr |= OH_SCC_ENABLE; - if (htw) { - /* Side effect: this will also power up the - * modem, but it's too messy to figure out on which - * ports this controls the tranceiver and on which - * it controls the modem - */ - if (trans) - fcr &= ~HRW_SCC_TRANS_EN_N; - MACIO_OUT32(OHARE_FCR, fcr); - fcr |= (rmask = HRW_RESET_SCC); - MACIO_OUT32(OHARE_FCR, fcr); - } else { - fcr |= (rmask = OH_SCC_RESET); - MACIO_OUT32(OHARE_FCR, fcr); - } - UNLOCK(flags); - (void)MACIO_IN32(OHARE_FCR); - mdelay(15); - LOCK(flags); - fcr &= ~rmask; - MACIO_OUT32(OHARE_FCR, fcr); - } - if (chan_mask & MACIO_FLAG_SCCA_ON) - fcr |= OH_SCCA_IO; - if (chan_mask & MACIO_FLAG_SCCB_ON) - fcr |= OH_SCCB_IO; - MACIO_OUT32(OHARE_FCR, fcr); - macio->flags |= chan_mask; - UNLOCK(flags); - if (param & PMAC_SCC_FLAG_XMON) - macio->flags |= MACIO_FLAG_SCC_LOCKED; - } else { - if (macio->flags & MACIO_FLAG_SCC_LOCKED) - return -EPERM; - LOCK(flags); - fcr = MACIO_IN32(OHARE_FCR); - if (chan_mask & MACIO_FLAG_SCCA_ON) - fcr &= ~OH_SCCA_IO; - if (chan_mask & MACIO_FLAG_SCCB_ON) - fcr &= ~OH_SCCB_IO; - MACIO_OUT32(OHARE_FCR, fcr); - if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { - fcr &= ~OH_SCC_ENABLE; - if (htw && trans) - fcr |= HRW_SCC_TRANS_EN_N; - MACIO_OUT32(OHARE_FCR, fcr); - } - macio->flags &= ~(chan_mask); - UNLOCK(flags); - mdelay(10); -#ifdef CONFIG_ADB_PMU - if ((param & 0xfff) == PMAC_SCC_IRDA) - pmu_enable_irled(0); -#endif /* CONFIG_ADB_PMU */ - } - return 0; -} - -static long -ohare_floppy_enable(struct device_node* node, long param, long value) -{ - return simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_FLOPPY_ENABLE, value); -} - -static long -ohare_mesh_enable(struct device_node* node, long param, long value) -{ - return simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_MESH_ENABLE, value); -} - -static long -ohare_ide_enable(struct device_node* node, long param, long value) -{ - switch(param) { - case 0: - /* For some reason, setting the bit in set_initial_features() - * doesn't stick. I'm still investigating... --BenH. - */ - if (value) - simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_IOBUS_ENABLE, 1); - return simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_IDE0_ENABLE, value); - case 1: - return simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_BAY_IDE_ENABLE, value); - default: - return -ENODEV; - } -} - -static long -ohare_ide_reset(struct device_node* node, long param, long value) -{ - switch(param) { - case 0: - return simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_IDE0_RESET_N, !value); - case 1: - return simple_feature_tweak(node, macio_ohare, - OHARE_FCR, OH_IDE1_RESET_N, !value); - default: - return -ENODEV; - } -} - -static long -ohare_sleep_state(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - - if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) - return -EPERM; - if (value == 1) { - MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); - } else if (value == 0) { - MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); - } - - return 0; -} - -static long -heathrow_modem_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - u8 gpio; - unsigned long flags; - - macio = macio_find(node, macio_unknown); - if (!macio) - return -ENODEV; - gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; - if (!value) { - LOCK(flags); - MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); - UNLOCK(flags); - (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); - mdelay(250); - } - if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && - pmac_mb.model_id != PMAC_TYPE_YIKES) { - LOCK(flags); - if (value) - MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); - else - MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); - UNLOCK(flags); - (void)MACIO_IN32(HEATHROW_FCR); - mdelay(250); - } - if (value) { - LOCK(flags); - MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); - (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); LOCK(flags); - MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); - (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); LOCK(flags); - MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); - (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); - } - return 0; -} - -static long -heathrow_floppy_enable(struct device_node* node, long param, long value) -{ - return simple_feature_tweak(node, macio_unknown, - HEATHROW_FCR, - HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, - value); -} - -static long -heathrow_mesh_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - - macio = macio_find(node, macio_unknown); - if (!macio) - return -ENODEV; - LOCK(flags); - /* Set clear mesh cell enable */ - if (value) - MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); - else - MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); - (void)MACIO_IN32(HEATHROW_FCR); - udelay(10); - /* Set/Clear termination power */ - if (value) - MACIO_BIC(HEATHROW_MBCR, 0x04000000); - else - MACIO_BIS(HEATHROW_MBCR, 0x04000000); - (void)MACIO_IN32(HEATHROW_MBCR); - udelay(10); - UNLOCK(flags); - - return 0; -} - -static long -heathrow_ide_enable(struct device_node* node, long param, long value) -{ - switch(param) { - case 0: - return simple_feature_tweak(node, macio_unknown, - HEATHROW_FCR, HRW_IDE0_ENABLE, value); - case 1: - return simple_feature_tweak(node, macio_unknown, - HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); - default: - return -ENODEV; - } -} - -static long -heathrow_ide_reset(struct device_node* node, long param, long value) -{ - switch(param) { - case 0: - return simple_feature_tweak(node, macio_unknown, - HEATHROW_FCR, HRW_IDE0_RESET_N, !value); - case 1: - return simple_feature_tweak(node, macio_unknown, - HEATHROW_FCR, HRW_IDE1_RESET_N, !value); - default: - return -ENODEV; - } -} - -static long -heathrow_bmac_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - if (value) { - LOCK(flags); - MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); - MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); - UNLOCK(flags); - (void)MACIO_IN32(HEATHROW_FCR); - mdelay(10); - LOCK(flags); - MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); - UNLOCK(flags); - (void)MACIO_IN32(HEATHROW_FCR); - mdelay(10); - } else { - LOCK(flags); - MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); - UNLOCK(flags); - } - return 0; -} - -static long -heathrow_sound_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - - /* B&W G3 and Yikes don't support that properly (the - * sound appear to never come back after beeing shut down). - */ - if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || - pmac_mb.model_id == PMAC_TYPE_YIKES) - return 0; - - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - if (value) { - LOCK(flags); - MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); - MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); - UNLOCK(flags); - (void)MACIO_IN32(HEATHROW_FCR); - } else { - LOCK(flags); - MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); - MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); - UNLOCK(flags); - } - return 0; -} - -static u32 save_fcr[6]; -static u32 save_mbcr; -static u32 save_gpio_levels[2]; -static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; -static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; -static u32 save_unin_clock_ctl; -static struct dbdma_regs save_dbdma[13]; -static struct dbdma_regs save_alt_dbdma[13]; - -static void -dbdma_save(struct macio_chip* macio, struct dbdma_regs* save) -{ - int i; - - /* Save state & config of DBDMA channels */ - for (i=0; i<13; i++) { - volatile struct dbdma_regs __iomem * chan = (void __iomem *) - (macio->base + ((0x8000+i*0x100)>>2)); - save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); - save[i].cmdptr = in_le32(&chan->cmdptr); - save[i].intr_sel = in_le32(&chan->intr_sel); - save[i].br_sel = in_le32(&chan->br_sel); - save[i].wait_sel = in_le32(&chan->wait_sel); - } -} - -static void -dbdma_restore(struct macio_chip* macio, struct dbdma_regs* save) -{ - int i; - - /* Save state & config of DBDMA channels */ - for (i=0; i<13; i++) { - volatile struct dbdma_regs __iomem * chan = (void __iomem *) - (macio->base + ((0x8000+i*0x100)>>2)); - out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); - while (in_le32(&chan->status) & ACTIVE) - mb(); - out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); - out_le32(&chan->cmdptr, save[i].cmdptr); - out_le32(&chan->intr_sel, save[i].intr_sel); - out_le32(&chan->br_sel, save[i].br_sel); - out_le32(&chan->wait_sel, save[i].wait_sel); - } -} - -static void -heathrow_sleep(struct macio_chip* macio, int secondary) -{ - if (secondary) { - dbdma_save(macio, save_alt_dbdma); - save_fcr[2] = MACIO_IN32(0x38); - save_fcr[3] = MACIO_IN32(0x3c); - } else { - dbdma_save(macio, save_dbdma); - save_fcr[0] = MACIO_IN32(0x38); - save_fcr[1] = MACIO_IN32(0x3c); - save_mbcr = MACIO_IN32(0x34); - /* Make sure sound is shut down */ - MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); - MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); - /* This seems to be necessary as well or the fan - * keeps coming up and battery drains fast */ - MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); - MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); - /* Make sure eth is down even if module or sleep - * won't work properly */ - MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); - } - /* Make sure modem is shut down */ - MACIO_OUT8(HRW_GPIO_MODEM_RESET, - MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); - MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); - MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); - - /* Let things settle */ - (void)MACIO_IN32(HEATHROW_FCR); -} - -static void -heathrow_wakeup(struct macio_chip* macio, int secondary) -{ - if (secondary) { - MACIO_OUT32(0x38, save_fcr[2]); - (void)MACIO_IN32(0x38); - mdelay(1); - MACIO_OUT32(0x3c, save_fcr[3]); - (void)MACIO_IN32(0x38); - mdelay(10); - dbdma_restore(macio, save_alt_dbdma); - } else { - MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); - (void)MACIO_IN32(0x38); - mdelay(1); - MACIO_OUT32(0x3c, save_fcr[1]); - (void)MACIO_IN32(0x38); - mdelay(1); - MACIO_OUT32(0x34, save_mbcr); - (void)MACIO_IN32(0x38); - mdelay(10); - dbdma_restore(macio, save_dbdma); - } -} - -static long -heathrow_sleep_state(struct device_node* node, long param, long value) -{ - if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) - return -EPERM; - if (value == 1) { - if (macio_chips[1].type == macio_gatwick) - heathrow_sleep(&macio_chips[0], 1); - heathrow_sleep(&macio_chips[0], 0); - } else if (value == 0) { - heathrow_wakeup(&macio_chips[0], 0); - if (macio_chips[1].type == macio_gatwick) - heathrow_wakeup(&macio_chips[0], 1); - } - return 0; -} - -static long -core99_scc_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - unsigned long chan_mask; - u32 fcr; - - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - if (!strcmp(node->name, "ch-a")) - chan_mask = MACIO_FLAG_SCCA_ON; - else if (!strcmp(node->name, "ch-b")) - chan_mask = MACIO_FLAG_SCCB_ON; - else - return -ENODEV; - - if (value) { - int need_reset_scc = 0; - int need_reset_irda = 0; - - LOCK(flags); - fcr = MACIO_IN32(KEYLARGO_FCR0); - /* Check if scc cell need enabling */ - if (!(fcr & KL0_SCC_CELL_ENABLE)) { - fcr |= KL0_SCC_CELL_ENABLE; - need_reset_scc = 1; - } - if (chan_mask & MACIO_FLAG_SCCA_ON) { - fcr |= KL0_SCCA_ENABLE; - /* Don't enable line drivers for I2S modem */ - if ((param & 0xfff) == PMAC_SCC_I2S1) - fcr &= ~KL0_SCC_A_INTF_ENABLE; - else - fcr |= KL0_SCC_A_INTF_ENABLE; - } - if (chan_mask & MACIO_FLAG_SCCB_ON) { - fcr |= KL0_SCCB_ENABLE; - /* Perform irda specific inits */ - if ((param & 0xfff) == PMAC_SCC_IRDA) { - fcr &= ~KL0_SCC_B_INTF_ENABLE; - fcr |= KL0_IRDA_ENABLE; - fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; - fcr |= KL0_IRDA_SOURCE1_SEL; - fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); - fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); - need_reset_irda = 1; - } else - fcr |= KL0_SCC_B_INTF_ENABLE; - } - MACIO_OUT32(KEYLARGO_FCR0, fcr); - macio->flags |= chan_mask; - if (need_reset_scc) { - MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); - (void)MACIO_IN32(KEYLARGO_FCR0); - UNLOCK(flags); - mdelay(15); - LOCK(flags); - MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); - } - if (need_reset_irda) { - MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); - (void)MACIO_IN32(KEYLARGO_FCR0); - UNLOCK(flags); - mdelay(15); - LOCK(flags); - MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); - } - UNLOCK(flags); - if (param & PMAC_SCC_FLAG_XMON) - macio->flags |= MACIO_FLAG_SCC_LOCKED; - } else { - if (macio->flags & MACIO_FLAG_SCC_LOCKED) - return -EPERM; - LOCK(flags); - fcr = MACIO_IN32(KEYLARGO_FCR0); - if (chan_mask & MACIO_FLAG_SCCA_ON) - fcr &= ~KL0_SCCA_ENABLE; - if (chan_mask & MACIO_FLAG_SCCB_ON) { - fcr &= ~KL0_SCCB_ENABLE; - /* Perform irda specific clears */ - if ((param & 0xfff) == PMAC_SCC_IRDA) { - fcr &= ~KL0_IRDA_ENABLE; - fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); - fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); - fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); - } - } - MACIO_OUT32(KEYLARGO_FCR0, fcr); - if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { - fcr &= ~KL0_SCC_CELL_ENABLE; - MACIO_OUT32(KEYLARGO_FCR0, fcr); - } - macio->flags &= ~(chan_mask); - UNLOCK(flags); - mdelay(10); - } - return 0; -} - -static long -core99_modem_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - u8 gpio; - unsigned long flags; - - /* Hack for internal USB modem */ - if (node == NULL) { - if (macio_chips[0].type != macio_keylargo) - return -ENODEV; - node = macio_chips[0].of_node; - } - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); - gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; - gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; - - if (!value) { - LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); - UNLOCK(flags); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - mdelay(250); - } - LOCK(flags); - if (value) { - MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); - UNLOCK(flags); - (void)MACIO_IN32(KEYLARGO_FCR2); - mdelay(250); - } else { - MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); - UNLOCK(flags); - } - if (value) { - LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); - } - return 0; -} - -static long -pangea_modem_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - u8 gpio; - unsigned long flags; - - /* Hack for internal USB modem */ - if (node == NULL) { - if (macio_chips[0].type != macio_pangea && - macio_chips[0].type != macio_intrepid) - return -ENODEV; - node = macio_chips[0].of_node; - } - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); - gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; - gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; - - if (!value) { - LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); - UNLOCK(flags); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - mdelay(250); - } - LOCK(flags); - if (value) { - MACIO_OUT8(KL_GPIO_MODEM_POWER, - KEYLARGO_GPIO_OUTPUT_ENABLE); - UNLOCK(flags); - (void)MACIO_IN32(KEYLARGO_FCR2); - mdelay(250); - } else { - MACIO_OUT8(KL_GPIO_MODEM_POWER, - KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); - UNLOCK(flags); - } - if (value) { - LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); LOCK(flags); - MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); - (void)MACIO_IN8(KL_GPIO_MODEM_RESET); - UNLOCK(flags); mdelay(250); - } - return 0; -} - -static long -core99_ata100_enable(struct device_node* node, long value) -{ - unsigned long flags; - struct pci_dev *pdev = NULL; - u8 pbus, pid; - - if (uninorth_rev < 0x24) - return -ENODEV; - - LOCK(flags); - if (value) - UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); - else - UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); - (void)UN_IN(UNI_N_CLOCK_CNTL); - UNLOCK(flags); - udelay(20); - - if (value) { - if (pci_device_from_OF_node(node, &pbus, &pid) == 0) - pdev = pci_find_slot(pbus, pid); - if (pdev == NULL) - return 0; - pci_enable_device(pdev); - pci_set_master(pdev); - } - return 0; -} - -static long -core99_ide_enable(struct device_node* node, long param, long value) -{ - /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 - * based ata-100 - */ - switch(param) { - case 0: - return simple_feature_tweak(node, macio_unknown, - KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); - case 1: - return simple_feature_tweak(node, macio_unknown, - KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); - case 2: - return simple_feature_tweak(node, macio_unknown, - KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); - case 3: - return core99_ata100_enable(node, value); - default: - return -ENODEV; - } -} - -static long -core99_ide_reset(struct device_node* node, long param, long value) -{ - switch(param) { - case 0: - return simple_feature_tweak(node, macio_unknown, - KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); - case 1: - return simple_feature_tweak(node, macio_unknown, - KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); - case 2: - return simple_feature_tweak(node, macio_unknown, - KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); - default: - return -ENODEV; - } -} - -static long -core99_gmac_enable(struct device_node* node, long param, long value) -{ - unsigned long flags; - - LOCK(flags); - if (value) - UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); - else - UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); - (void)UN_IN(UNI_N_CLOCK_CNTL); - UNLOCK(flags); - udelay(20); - - return 0; -} - -static long -core99_gmac_phy_reset(struct device_node* node, long param, long value) -{ - unsigned long flags; - struct macio_chip* macio; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo && macio->type != macio_pangea && - macio->type != macio_intrepid) - return -ENODEV; - - LOCK(flags); - MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); - (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); - UNLOCK(flags); - mdelay(10); - LOCK(flags); - MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ - KEYLARGO_GPIO_OUTOUT_DATA); - UNLOCK(flags); - mdelay(10); - - return 0; -} - -static long -core99_sound_chip_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - - /* Do a better probe code, screamer G4 desktops & - * iMacs can do that too, add a recalibrate in - * the driver as well - */ - if (pmac_mb.model_id == PMAC_TYPE_PISMO || - pmac_mb.model_id == PMAC_TYPE_TITANIUM) { - LOCK(flags); - if (value) - MACIO_OUT8(KL_GPIO_SOUND_POWER, - KEYLARGO_GPIO_OUTPUT_ENABLE | - KEYLARGO_GPIO_OUTOUT_DATA); - else - MACIO_OUT8(KL_GPIO_SOUND_POWER, - KEYLARGO_GPIO_OUTPUT_ENABLE); - (void)MACIO_IN8(KL_GPIO_SOUND_POWER); - UNLOCK(flags); - } - return 0; -} - -static long -core99_airport_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - int state; - - macio = macio_find(node, 0); - if (!macio) - return -ENODEV; - - /* Hint: we allow passing of macio itself for the sake of the - * sleep code - */ - if (node != macio->of_node && - (!node->parent || node->parent != macio->of_node)) - return -ENODEV; - state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; - if (value == state) - return 0; - if (value) { - /* This code is a reproduction of OF enable-cardslot - * and init-wireless methods, slightly hacked until - * I got it working. - */ - LOCK(flags); - MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); - (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); - UNLOCK(flags); - mdelay(10); - LOCK(flags); - MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); - (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); - UNLOCK(flags); - - mdelay(10); - - LOCK(flags); - MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); - (void)MACIO_IN32(KEYLARGO_FCR2); - udelay(10); - MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); - (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); - udelay(10); - MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); - (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); - udelay(10); - MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); - (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); - udelay(10); - MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); - (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); - udelay(10); - MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); - (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); - UNLOCK(flags); - udelay(10); - MACIO_OUT32(0x1c000, 0); - mdelay(1); - MACIO_OUT8(0x1a3e0, 0x41); - (void)MACIO_IN8(0x1a3e0); - udelay(10); - LOCK(flags); - MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); - (void)MACIO_IN32(KEYLARGO_FCR2); - UNLOCK(flags); - mdelay(100); - - macio->flags |= MACIO_FLAG_AIRPORT_ON; - } else { - LOCK(flags); - MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); - (void)MACIO_IN32(KEYLARGO_FCR2); - MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); - MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); - MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); - MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); - MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); - (void)MACIO_IN8(KL_GPIO_AIRPORT_4); - UNLOCK(flags); - - macio->flags &= ~MACIO_FLAG_AIRPORT_ON; - } - return 0; -} - -#ifdef CONFIG_SMP -static long -core99_reset_cpu(struct device_node* node, long param, long value) -{ - unsigned int reset_io = 0; - unsigned long flags; - struct macio_chip* macio; - struct device_node* np; - const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, - KL_GPIO_RESET_CPU1, - KL_GPIO_RESET_CPU2, - KL_GPIO_RESET_CPU3 }; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo) - return -ENODEV; - - np = find_path_device("/cpus"); - if (np == NULL) - return -ENODEV; - for (np = np->child; np != NULL; np = np->sibling) { - u32* num = (u32 *)get_property(np, "reg", NULL); - u32* rst = (u32 *)get_property(np, "soft-reset", NULL); - if (num == NULL || rst == NULL) - continue; - if (param == *num) { - reset_io = *rst; - break; - } - } - if (np == NULL || reset_io == 0) - reset_io = dflt_reset_lines[param]; - - LOCK(flags); - MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); - (void)MACIO_IN8(reset_io); - udelay(1); - MACIO_OUT8(reset_io, 0); - (void)MACIO_IN8(reset_io); - UNLOCK(flags); - - return 0; -} -#endif /* CONFIG_SMP */ - -static long -core99_usb_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio; - unsigned long flags; - char* prop; - int number; - u32 reg; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo && macio->type != macio_pangea && - macio->type != macio_intrepid) - return -ENODEV; - - prop = (char *)get_property(node, "AAPL,clock-id", NULL); - if (!prop) - return -ENODEV; - if (strncmp(prop, "usb0u048", 8) == 0) - number = 0; - else if (strncmp(prop, "usb1u148", 8) == 0) - number = 2; - else if (strncmp(prop, "usb2u248", 8) == 0) - number = 4; - else - return -ENODEV; - - /* Sorry for the brute-force locking, but this is only used during - * sleep and the timing seem to be critical - */ - LOCK(flags); - if (value) { - /* Turn ON */ - if (number == 0) { - MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); - (void)MACIO_IN32(KEYLARGO_FCR0); - UNLOCK(flags); - mdelay(1); - LOCK(flags); - MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); - } else if (number == 2) { - MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); - UNLOCK(flags); - (void)MACIO_IN32(KEYLARGO_FCR0); - mdelay(1); - LOCK(flags); - MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); - } else if (number == 4) { - MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); - UNLOCK(flags); - (void)MACIO_IN32(KEYLARGO_FCR1); - mdelay(1); - LOCK(flags); - MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); - } - if (number < 4) { - reg = MACIO_IN32(KEYLARGO_FCR4); - reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | - KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); - reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | - KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); - MACIO_OUT32(KEYLARGO_FCR4, reg); - (void)MACIO_IN32(KEYLARGO_FCR4); - udelay(10); - } else { - reg = MACIO_IN32(KEYLARGO_FCR3); - reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | - KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); - reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | - KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); - MACIO_OUT32(KEYLARGO_FCR3, reg); - (void)MACIO_IN32(KEYLARGO_FCR3); - udelay(10); - } - if (macio->type == macio_intrepid) { - /* wait for clock stopped bits to clear */ - u32 test0 = 0, test1 = 0; - u32 status0, status1; - int timeout = 1000; - - UNLOCK(flags); - switch (number) { - case 0: - test0 = UNI_N_CLOCK_STOPPED_USB0; - test1 = UNI_N_CLOCK_STOPPED_USB0PCI; - break; - case 2: - test0 = UNI_N_CLOCK_STOPPED_USB1; - test1 = UNI_N_CLOCK_STOPPED_USB1PCI; - break; - case 4: - test0 = UNI_N_CLOCK_STOPPED_USB2; - test1 = UNI_N_CLOCK_STOPPED_USB2PCI; - break; - } - do { - if (--timeout <= 0) { - printk(KERN_ERR "core99_usb_enable: " - "Timeout waiting for clocks\n"); - break; - } - mdelay(1); - status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); - status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); - } while ((status0 & test0) | (status1 & test1)); - LOCK(flags); - } - } else { - /* Turn OFF */ - if (number < 4) { - reg = MACIO_IN32(KEYLARGO_FCR4); - reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | - KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); - reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | - KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); - MACIO_OUT32(KEYLARGO_FCR4, reg); - (void)MACIO_IN32(KEYLARGO_FCR4); - udelay(1); - } else { - reg = MACIO_IN32(KEYLARGO_FCR3); - reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | - KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); - reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | - KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); - MACIO_OUT32(KEYLARGO_FCR3, reg); - (void)MACIO_IN32(KEYLARGO_FCR3); - udelay(1); - } - if (number == 0) { - if (macio->type != macio_intrepid) - MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); - (void)MACIO_IN32(KEYLARGO_FCR0); - udelay(1); - MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); - (void)MACIO_IN32(KEYLARGO_FCR0); - } else if (number == 2) { - if (macio->type != macio_intrepid) - MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); - (void)MACIO_IN32(KEYLARGO_FCR0); - udelay(1); - MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); - (void)MACIO_IN32(KEYLARGO_FCR0); - } else if (number == 4) { - udelay(1); - MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); - (void)MACIO_IN32(KEYLARGO_FCR1); - } - udelay(1); - } - UNLOCK(flags); - - return 0; -} - -static long -core99_firewire_enable(struct device_node* node, long param, long value) -{ - unsigned long flags; - struct macio_chip* macio; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo && macio->type != macio_pangea && - macio->type != macio_intrepid) - return -ENODEV; - if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) - return -ENODEV; - - LOCK(flags); - if (value) { - UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); - (void)UN_IN(UNI_N_CLOCK_CNTL); - } else { - UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); - (void)UN_IN(UNI_N_CLOCK_CNTL); - } - UNLOCK(flags); - mdelay(1); - - return 0; -} - -static long -core99_firewire_cable_power(struct device_node* node, long param, long value) -{ - unsigned long flags; - struct macio_chip* macio; - - /* Trick: we allow NULL node */ - if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) - return -ENODEV; - macio = &macio_chips[0]; - if (macio->type != macio_keylargo && macio->type != macio_pangea && - macio->type != macio_intrepid) - return -ENODEV; - if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) - return -ENODEV; - - LOCK(flags); - if (value) { - MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); - MACIO_IN8(KL_GPIO_FW_CABLE_POWER); - udelay(10); - } else { - MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); - MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); - } - UNLOCK(flags); - mdelay(1); - - return 0; -} - -static long -intrepid_aack_delay_enable(struct device_node* node, long param, long value) -{ - unsigned long flags; - - if (uninorth_rev < 0xd2) - return -ENODEV; - - LOCK(flags); - if (param) - UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); - else - UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); - UNLOCK(flags); - - return 0; -} - - -#endif /* CONFIG_POWER4 */ - -static long -core99_read_gpio(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - - return MACIO_IN8(param); -} - - -static long -core99_write_gpio(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - - MACIO_OUT8(param, (u8)(value & 0xff)); - return 0; -} - -#ifdef CONFIG_POWER4 - -static long -g5_gmac_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - unsigned long flags; - u8 pbus, pid; - - LOCK(flags); - if (value) { - MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); - mb(); - k2_skiplist[0] = NULL; - } else { - k2_skiplist[0] = node; - mb(); - MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); - } - - UNLOCK(flags); - mdelay(1); - - return 0; -} - -static long -g5_fw_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - unsigned long flags; - - LOCK(flags); - if (value) { - MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); - mb(); - k2_skiplist[1] = NULL; - } else { - k2_skiplist[1] = node; - mb(); - MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); - } - - UNLOCK(flags); - mdelay(1); - - return 0; -} - -static long -g5_mpic_enable(struct device_node* node, long param, long value) -{ - unsigned long flags; - - if (node->parent == NULL || strcmp(node->parent->name, "u3")) - return 0; - - LOCK(flags); - UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); - UNLOCK(flags); - - return 0; -} - -#ifdef CONFIG_SMP -static long -g5_reset_cpu(struct device_node* node, long param, long value) -{ - unsigned int reset_io = 0; - unsigned long flags; - struct macio_chip* macio; - struct device_node* np; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo2) - return -ENODEV; - - np = find_path_device("/cpus"); - if (np == NULL) - return -ENODEV; - for (np = np->child; np != NULL; np = np->sibling) { - u32* num = (u32 *)get_property(np, "reg", NULL); - u32* rst = (u32 *)get_property(np, "soft-reset", NULL); - if (num == NULL || rst == NULL) - continue; - if (param == *num) { - reset_io = *rst; - break; - } - } - if (np == NULL || reset_io == 0) - return -ENODEV; - - LOCK(flags); - MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); - (void)MACIO_IN8(reset_io); - udelay(1); - MACIO_OUT8(reset_io, 0); - (void)MACIO_IN8(reset_io); - UNLOCK(flags); - - return 0; -} -#endif /* CONFIG_SMP */ - -/* - * This can be called from pmac_smp so isn't static - * - * This takes the second CPU off the bus on dual CPU machines - * running UP - */ -void g5_phy_disable_cpu1(void) -{ - UN_OUT(U3_API_PHY_CONFIG_1, 0); -} - -#endif /* CONFIG_POWER4 */ - -#ifndef CONFIG_POWER4 - -static void -keylargo_shutdown(struct macio_chip* macio, int sleep_mode) -{ - u32 temp; - - if (sleep_mode) { - mdelay(1); - MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); - (void)MACIO_IN32(KEYLARGO_FCR0); - mdelay(1); - } - - MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | - KL0_SCC_CELL_ENABLE | - KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | - KL0_IRDA_CLK19_ENABLE); - - MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); - MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); - - MACIO_BIC(KEYLARGO_FCR1, - KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | - KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | - KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | - KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | - KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | - KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | - KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | - KL1_UIDE_ENABLE); - - MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); - MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); - - temp = MACIO_IN32(KEYLARGO_FCR3); - if (macio->rev >= 2) { - temp |= KL3_SHUTDOWN_PLL2X; - if (sleep_mode) - temp |= KL3_SHUTDOWN_PLL_TOTAL; - } - - temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | - KL3_SHUTDOWN_PLLKW35; - if (sleep_mode) - temp |= KL3_SHUTDOWN_PLLKW12; - temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE - | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); - if (sleep_mode) - temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); - MACIO_OUT32(KEYLARGO_FCR3, temp); - - /* Flush posted writes & wait a bit */ - (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); -} - -static void -pangea_shutdown(struct macio_chip* macio, int sleep_mode) -{ - u32 temp; - - MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | - KL0_SCC_CELL_ENABLE | - KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); - - MACIO_BIC(KEYLARGO_FCR1, - KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | - KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | - KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | - KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | - KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | - KL1_UIDE_ENABLE); - if (pmac_mb.board_flags & PMAC_MB_MOBILE) - MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); - - MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); - - temp = MACIO_IN32(KEYLARGO_FCR3); - temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | - KL3_SHUTDOWN_PLLKW35; - temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE - | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); - if (sleep_mode) - temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); - MACIO_OUT32(KEYLARGO_FCR3, temp); - - /* Flush posted writes & wait a bit */ - (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); -} - -static void -intrepid_shutdown(struct macio_chip* macio, int sleep_mode) -{ - u32 temp; - - MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | - KL0_SCC_CELL_ENABLE); - - MACIO_BIC(KEYLARGO_FCR1, - /*KL1_USB2_CELL_ENABLE |*/ - KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | - KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | - KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE); - if (pmac_mb.board_flags & PMAC_MB_MOBILE) - MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); - - temp = MACIO_IN32(KEYLARGO_FCR3); - temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | - KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); - if (sleep_mode) - temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); - MACIO_OUT32(KEYLARGO_FCR3, temp); - - /* Flush posted writes & wait a bit */ - (void)MACIO_IN32(KEYLARGO_FCR0); - mdelay(10); -} - - -void pmac_tweak_clock_spreading(int enable) -{ - struct macio_chip* macio = &macio_chips[0]; - - /* Hack for doing clock spreading on some machines PowerBooks and - * iBooks. This implements the "platform-do-clockspreading" OF - * property as decoded manually on various models. For safety, we also - * check the product ID in the device-tree in cases we'll whack the i2c - * chip to make reasonably sure we won't set wrong values in there - * - * Of course, ultimately, we have to implement a real parser for - * the platform-do-* stuff... - */ - - if (macio->type == macio_intrepid) { - struct device_node *clock = - of_find_node_by_path("/uni-n@f8000000/hw-clock"); - if (clock && get_property(clock, "platform-do-clockspreading", - NULL)) { - printk(KERN_INFO "%sabling clock spreading on Intrepid" - " ASIC\n", enable ? "En" : "Dis"); - if (enable) - UN_OUT(UNI_N_CLOCK_SPREADING, 2); - else - UN_OUT(UNI_N_CLOCK_SPREADING, 0); - mdelay(40); - } - of_node_put(clock); - } - - while (machine_is_compatible("PowerBook5,2") || - machine_is_compatible("PowerBook5,3") || - machine_is_compatible("PowerBook6,2") || - machine_is_compatible("PowerBook6,3")) { - struct device_node *ui2c = of_find_node_by_type(NULL, "i2c"); - struct device_node *dt = of_find_node_by_name(NULL, "device-tree"); - u8 buffer[9]; - u32 *productID; - int i, rc, changed = 0; - - if (dt == NULL) - break; - productID = (u32 *)get_property(dt, "pid#", NULL); - if (productID == NULL) - break; - while(ui2c) { - struct device_node *p = of_get_parent(ui2c); - if (p && !strcmp(p->name, "uni-n")) - break; - ui2c = of_find_node_by_type(ui2c, "i2c"); - } - if (ui2c == NULL) - break; - DBG("Trying to bump clock speed for PID: %08x...\n", *productID); - rc = pmac_low_i2c_open(ui2c, 1); - if (rc != 0) - break; - pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); - DBG("read result: %d,", rc); - if (rc != 0) { - pmac_low_i2c_close(ui2c); - break; - } - for (i=0; i<9; i++) - DBG(" %02x", buffer[i]); - DBG("\n"); - - switch(*productID) { - case 0x1182: /* AlBook 12" rev 2 */ - case 0x1183: /* iBook G4 12" */ - buffer[0] = (buffer[0] & 0x8f) | 0x70; - buffer[2] = (buffer[2] & 0x7f) | 0x00; - buffer[5] = (buffer[5] & 0x80) | 0x31; - buffer[6] = (buffer[6] & 0x40) | 0xb0; - buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba); - buffer[8] = (buffer[8] & 0x00) | 0x30; - changed = 1; - break; - case 0x3142: /* AlBook 15" (ATI M10) */ - case 0x3143: /* AlBook 17" (ATI M10) */ - buffer[0] = (buffer[0] & 0xaf) | 0x50; - buffer[2] = (buffer[2] & 0x7f) | 0x00; - buffer[5] = (buffer[5] & 0x80) | 0x31; - buffer[6] = (buffer[6] & 0x40) | 0xb0; - buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0); - buffer[8] = (buffer[8] & 0x00) | 0x30; - changed = 1; - break; - default: - DBG("i2c-hwclock: Machine model not handled\n"); - break; - } - if (!changed) { - pmac_low_i2c_close(ui2c); - break; - } - printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n", - enable ? "En" : "Dis"); - pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9); - DBG("write result: %d,", rc); - pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); - DBG("read result: %d,", rc); - if (rc != 0) { - pmac_low_i2c_close(ui2c); - break; - } - for (i=0; i<9; i++) - DBG(" %02x", buffer[i]); - pmac_low_i2c_close(ui2c); - break; - } -} - - -static int -core99_sleep(void) -{ - struct macio_chip* macio; - int i; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo && macio->type != macio_pangea && - macio->type != macio_intrepid) - return -ENODEV; - - /* We power off the wireless slot in case it was not done - * by the driver. We don't power it on automatically however - */ - if (macio->flags & MACIO_FLAG_AIRPORT_ON) - core99_airport_enable(macio->of_node, 0, 0); - - /* We power off the FW cable. Should be done by the driver... */ - if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { - core99_firewire_enable(NULL, 0, 0); - core99_firewire_cable_power(NULL, 0, 0); - } - - /* We make sure int. modem is off (in case driver lost it) */ - if (macio->type == macio_keylargo) - core99_modem_enable(macio->of_node, 0, 0); - else - pangea_modem_enable(macio->of_node, 0, 0); - - /* We make sure the sound is off as well */ - core99_sound_chip_enable(macio->of_node, 0, 0); - - /* - * Save various bits of KeyLargo - */ - - /* Save the state of the various GPIOs */ - save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); - save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); - for (i=0; itype == macio_keylargo) - save_mbcr = MACIO_IN32(KEYLARGO_MBCR); - save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); - save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); - save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); - save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); - save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); - if (macio->type == macio_pangea || macio->type == macio_intrepid) - save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); - - /* Save state & config of DBDMA channels */ - dbdma_save(macio, save_dbdma); - - /* - * Turn off as much as we can - */ - if (macio->type == macio_pangea) - pangea_shutdown(macio, 1); - else if (macio->type == macio_intrepid) - intrepid_shutdown(macio, 1); - else if (macio->type == macio_keylargo) - keylargo_shutdown(macio, 1); - - /* - * Put the host bridge to sleep - */ - - save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); - /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it - * enabled ! - */ - UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & - ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); - udelay(100); - UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); - UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); - mdelay(10); - - /* - * FIXME: A bit of black magic with OpenPIC (don't ask me why) - */ - if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { - MACIO_BIS(0x506e0, 0x00400000); - MACIO_BIS(0x506e0, 0x80000000); - } - return 0; -} - -static int -core99_wake_up(void) -{ - struct macio_chip* macio; - int i; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo && macio->type != macio_pangea && - macio->type != macio_intrepid) - return -ENODEV; - - /* - * Wakeup the host bridge - */ - UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); - udelay(10); - UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); - udelay(10); - - /* - * Restore KeyLargo - */ - - if (macio->type == macio_keylargo) { - MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); - (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); - } - MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); - (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); - MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); - (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); - MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); - (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); - MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); - (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); - MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); - (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); - if (macio->type == macio_pangea || macio->type == macio_intrepid) { - MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); - (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); - } - - dbdma_restore(macio, save_dbdma); - - MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); - MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); - for (i=0; itype) { -#ifndef CONFIG_POWER4 - case macio_grand_central: - pmac_mb.model_id = PMAC_TYPE_PSURGE; - pmac_mb.model_name = "Unknown PowerSurge"; - break; - case macio_ohare: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; - pmac_mb.model_name = "Unknown OHare-based"; - break; - case macio_heathrow: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; - pmac_mb.model_name = "Unknown Heathrow-based"; - pmac_mb.features = heathrow_desktop_features; - break; - case macio_paddington: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; - pmac_mb.model_name = "Unknown Paddington-based"; - pmac_mb.features = paddington_features; - break; - case macio_keylargo: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; - pmac_mb.model_name = "Unknown Keylargo-based"; - pmac_mb.features = core99_features; - break; - case macio_pangea: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; - pmac_mb.model_name = "Unknown Pangea-based"; - pmac_mb.features = pangea_features; - break; - case macio_intrepid: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; - pmac_mb.model_name = "Unknown Intrepid-based"; - pmac_mb.features = intrepid_features; - break; -#else /* CONFIG_POWER4 */ - case macio_keylargo2: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; - pmac_mb.model_name = "Unknown G5"; - pmac_mb.features = g5_features; - break; -#endif /* CONFIG_POWER4 */ - default: - return -ENODEV; - } -found: -#ifndef CONFIG_POWER4 - /* Fixup Hooper vs. Comet */ - if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { - u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); - if (!mach_id_ptr) - return -ENODEV; - /* Here, I used to disable the media-bay on comet. It - * appears this is wrong, the floppy connector is actually - * a kind of media-bay and works with the current driver. - */ - if (__raw_readl(mach_id_ptr) & 0x20000000UL) - pmac_mb.model_id = PMAC_TYPE_COMET; - iounmap(mach_id_ptr); - } -#endif /* CONFIG_POWER4 */ - -#ifdef CONFIG_6xx - /* Set default value of powersave_nap on machines that support it. - * It appears that uninorth rev 3 has a problem with it, we don't - * enable it on those. In theory, the flush-on-lock property is - * supposed to be set when not supported, but I'm not very confident - * that all Apple OF revs did it properly, I do it the paranoid way. - */ - while (uninorth_base && uninorth_rev > 3) { - struct device_node* np = find_path_device("/cpus"); - if (!np || !np->child) { - printk(KERN_WARNING "Can't find CPU(s) in device tree !\n"); - break; - } - np = np->child; - /* Nap mode not supported on SMP */ - if (np->sibling) - break; - /* Nap mode not supported if flush-on-lock property is present */ - if (get_property(np, "flush-on-lock", NULL)) - break; - powersave_nap = 1; - printk(KERN_INFO "Processor NAP mode on idle enabled.\n"); - break; - } - - /* On CPUs that support it (750FX), lowspeed by default during - * NAP mode - */ - powersave_lowspeed = 1; -#endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - powersave_nap = 1; -#endif - /* Check for "mobile" machine */ - if (model && (strncmp(model, "PowerBook", 9) == 0 - || strncmp(model, "iBook", 5) == 0)) - pmac_mb.board_flags |= PMAC_MB_MOBILE; - - - printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); - return 0; -} - -/* Initialize the Core99 UniNorth host bridge and memory controller - */ -static void __init -probe_uninorth(void) -{ - unsigned long actrl; - - /* Locate core99 Uni-N */ - uninorth_node = of_find_node_by_name(NULL, "uni-n"); - /* Locate G5 u3 */ - if (uninorth_node == NULL) { - uninorth_node = of_find_node_by_name(NULL, "u3"); - uninorth_u3 = 1; - } - if (uninorth_node && uninorth_node->n_addrs > 0) { - unsigned long address = uninorth_node->addrs[0].address; - uninorth_base = ioremap(address, 0x40000); - uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_u3) - u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); - } else - uninorth_node = NULL; - - if (!uninorth_node) - return; - - printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n", - uninorth_u3 ? "U3" : "UniNorth", uninorth_rev); - printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); - - /* Set the arbitrer QAck delay according to what Apple does - */ - if (uninorth_rev < 0x11) { - actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; - actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : - UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; - UN_OUT(UNI_N_ARB_CTRL, actrl); - } - - /* Some more magic as done by them in recent MacOS X on UniNorth - * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI - * memory timeout - */ - if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0) - UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); -} - -static void __init -probe_one_macio(const char* name, const char* compat, int type) -{ - struct device_node* node; - int i; - volatile u32 __iomem * base; - u32* revp; - - node = find_devices(name); - if (!node || !node->n_addrs) - return; - if (compat) - do { - if (device_is_compatible(node, compat)) - break; - node = node->next; - } while (node); - if (!node) - return; - for(i=0; i= MAX_MACIO_CHIPS) { - printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); - printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); - return; - } - base = ioremap(node->addrs[0].address, node->addrs[0].size); - if (!base) { - printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); - return; - } - if (type == macio_keylargo) { - u32* did = (u32 *)get_property(node, "device-id", NULL); - if (*did == 0x00000025) - type = macio_pangea; - if (*did == 0x0000003e) - type = macio_intrepid; - } - macio_chips[i].of_node = node; - macio_chips[i].type = type; - macio_chips[i].base = base; - macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON; - macio_chips[i].name = macio_names[type]; - revp = (u32 *)get_property(node, "revision-id", NULL); - if (revp) - macio_chips[i].rev = *revp; - printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", - macio_names[type], macio_chips[i].rev, macio_chips[i].base); -} - -static int __init -probe_macios(void) -{ - /* Warning, ordering is important */ - probe_one_macio("gc", NULL, macio_grand_central); - probe_one_macio("ohare", NULL, macio_ohare); - probe_one_macio("pci106b,7", NULL, macio_ohareII); - probe_one_macio("mac-io", "keylargo", macio_keylargo); - probe_one_macio("mac-io", "paddington", macio_paddington); - probe_one_macio("mac-io", "gatwick", macio_gatwick); - probe_one_macio("mac-io", "heathrow", macio_heathrow); - probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); - - /* Make sure the "main" macio chip appear first */ - if (macio_chips[0].type == macio_gatwick - && macio_chips[1].type == macio_heathrow) { - struct macio_chip temp = macio_chips[0]; - macio_chips[0] = macio_chips[1]; - macio_chips[1] = temp; - } - if (macio_chips[0].type == macio_ohareII - && macio_chips[1].type == macio_ohare) { - struct macio_chip temp = macio_chips[0]; - macio_chips[0] = macio_chips[1]; - macio_chips[1] = temp; - } - macio_chips[0].lbus.index = 0; - macio_chips[1].lbus.index = 1; - - return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; -} - -static void __init -initial_serial_shutdown(struct device_node* np) -{ - int len; - struct slot_names_prop { - int count; - char name[1]; - } *slots; - char *conn; - int port_type = PMAC_SCC_ASYNC; - int modem = 0; - - slots = (struct slot_names_prop *)get_property(np, "slot-names", &len); - conn = get_property(np, "AAPL,connector", &len); - if (conn && (strcmp(conn, "infrared") == 0)) - port_type = PMAC_SCC_IRDA; - else if (device_is_compatible(np, "cobalt")) - modem = 1; - else if (slots && slots->count > 0) { - if (strcmp(slots->name, "IrDA") == 0) - port_type = PMAC_SCC_IRDA; - else if (strcmp(slots->name, "Modem") == 0) - modem = 1; - } - if (modem) - pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); - pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); -} - -static void __init -set_initial_features(void) -{ - struct device_node* np; - - /* That hack appears to be necessary for some StarMax motherboards - * but I'm not too sure it was audited for side-effects on other - * ohare based machines... - * Since I still have difficulties figuring the right way to - * differenciate them all and since that hack was there for a long - * time, I'll keep it around - */ - if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) { - struct macio_chip* macio = &macio_chips[0]; - MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); - } else if (macio_chips[0].type == macio_ohare) { - struct macio_chip* macio = &macio_chips[0]; - MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); - } else if (macio_chips[1].type == macio_ohare) { - struct macio_chip* macio = &macio_chips[1]; - MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); - } - -#ifdef CONFIG_POWER4 - if (macio_chips[0].type == macio_keylargo2) { -#ifndef CONFIG_SMP - /* On SMP machines running UP, we have the second CPU eating - * bus cycles. We need to take it off the bus. This is done - * from pmac_smp for SMP kernels running on one CPU - */ - np = of_find_node_by_type(NULL, "cpu"); - if (np != NULL) - np = of_find_node_by_type(np, "cpu"); - if (np != NULL) { - g5_phy_disable_cpu1(); - of_node_put(np); - } -#endif /* CONFIG_SMP */ - /* Enable GMAC for now for PCI probing. It will be disabled - * later on after PCI probe - */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { - if (device_is_compatible(np, "K2-GMAC")) - g5_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); - } - - /* Enable FW before PCI probe. Will be disabled later on - * Note: We should have a batter way to check that we are - * dealing with uninorth internal cell and not a PCI cell - * on the external PCI. The code below works though. - */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { - if (device_is_compatible(np, "pci106b,5811")) { - macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; - g5_fw_enable(np, 0, 1); - } - np = of_find_node_by_name(np, "firewire"); - } - } -#else /* CONFIG_POWER4 */ - - if (macio_chips[0].type == macio_keylargo || - macio_chips[0].type == macio_pangea || - macio_chips[0].type == macio_intrepid) { - /* Enable GMAC for now for PCI probing. It will be disabled - * later on after PCI probe - */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { - if (np->parent - && device_is_compatible(np->parent, "uni-north") - && device_is_compatible(np, "gmac")) - core99_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); - } - - /* Enable FW before PCI probe. Will be disabled later on - * Note: We should have a batter way to check that we are - * dealing with uninorth internal cell and not a PCI cell - * on the external PCI. The code below works though. - */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { - if (np->parent - && device_is_compatible(np->parent, "uni-north") - && (device_is_compatible(np, "pci106b,18") || - device_is_compatible(np, "pci106b,30") || - device_is_compatible(np, "pci11c1,5811"))) { - macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; - core99_firewire_enable(np, 0, 1); - } - np = of_find_node_by_name(np, "firewire"); - } - - /* Enable ATA-100 before PCI probe. */ - np = of_find_node_by_name(NULL, "ata-6"); - while(np) { - if (np->parent - && device_is_compatible(np->parent, "uni-north") - && device_is_compatible(np, "kauai-ata")) { - core99_ata100_enable(np, 1); - } - np = of_find_node_by_name(np, "ata-6"); - } - - /* Switch airport off */ - np = find_devices("radio"); - while(np) { - if (np && np->parent == macio_chips[0].of_node) { - macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; - core99_airport_enable(np, 0, 0); - } - np = np->next; - } - } - - /* On all machines that support sound PM, switch sound off */ - if (macio_chips[0].of_node) - pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, - macio_chips[0].of_node, 0, 0); - - /* While on some desktop G3s, we turn it back on */ - if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow - && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || - pmac_mb.model_id == PMAC_TYPE_SILK)) { - struct macio_chip* macio = &macio_chips[0]; - MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); - MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); - } - - /* Some machine models need the clock chip to be properly setup for - * clock spreading now. This should be a platform function but we - * don't do these at the moment - */ - pmac_tweak_clock_spreading(1); - -#endif /* CONFIG_POWER4 */ - - /* On all machines, switch modem & serial ports off */ - np = find_devices("ch-a"); - while(np) { - initial_serial_shutdown(np); - np = np->next; - } - np = find_devices("ch-b"); - while(np) { - initial_serial_shutdown(np); - np = np->next; - } -} - -void __init -pmac_feature_init(void) -{ - /* Detect the UniNorth memory controller */ - probe_uninorth(); - - /* Probe mac-io controllers */ - if (probe_macios()) { - printk(KERN_WARNING "No mac-io chip found\n"); - return; - } - - /* Setup low-level i2c stuffs */ - pmac_init_low_i2c(); - - /* Probe machine type */ - if (probe_motherboard()) - printk(KERN_WARNING "Unknown PowerMac !\n"); - - /* Set some initial features (turn off some chips that will - * be later turned on) - */ - set_initial_features(); -} - -int __init -pmac_feature_late_init(void) -{ - struct device_node* np; - - /* Request some resources late */ - if (uninorth_node) - request_OF_resource(uninorth_node, 0, NULL); - np = find_devices("hammerhead"); - if (np) - request_OF_resource(np, 0, NULL); - np = find_devices("interrupt-controller"); - if (np) - request_OF_resource(np, 0, NULL); - return 0; -} - -device_initcall(pmac_feature_late_init); - -#ifdef CONFIG_POWER4 - -static void dump_HT_speeds(char *name, u32 cfg, u32 frq) -{ - int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; - int bits[8] = { 8,16,0,32,2,4,0,0 }; - int freq = (frq >> 8) & 0xf; - - if (freqs[freq] == 0) - printk("%s: Unknown HT link frequency %x\n", name, freq); - else - printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", - name, freqs[freq], - bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); -} - -void __init pmac_check_ht_link(void) -{ - u32 ufreq, freq, ucfg, cfg; - struct device_node *pcix_node; - u8 px_bus, px_devfn; - struct pci_controller *px_hose; - - (void)in_be32(u3_ht + U3_HT_LINK_COMMAND); - ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG); - ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ); - dump_HT_speeds("U3 HyperTransport", cfg, freq); - - pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); - if (pcix_node == NULL) { - printk("No PCI-X bridge found\n"); - return; - } - if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { - printk("PCI-X bridge found but not matched to pci\n"); - return; - } - px_hose = pci_find_hose_for_OF_device(pcix_node); - if (px_hose == NULL) { - printk("PCI-X bridge found but not matched to host\n"); - return; - } - early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); - early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); - dump_HT_speeds("PCI-X HT Uplink", cfg, freq); - early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); - early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); - dump_HT_speeds("PCI-X HT Downlink", cfg, freq); -} - -#endif /* CONFIG_POWER4 */ - -/* - * Early video resume hook - */ - -static void (*pmac_early_vresume_proc)(void *data); -static void *pmac_early_vresume_data; - -void pmac_set_early_video_resume(void (*proc)(void *data), void *data) -{ - if (_machine != _MACH_Pmac) - return; - preempt_disable(); - pmac_early_vresume_proc = proc; - pmac_early_vresume_data = data; - preempt_enable(); -} -EXPORT_SYMBOL(pmac_set_early_video_resume); - -void pmac_call_early_video_resume(void) -{ - if (pmac_early_vresume_proc) - pmac_early_vresume_proc(pmac_early_vresume_data); -} - -/* - * AGP related suspend/resume code - */ - -static struct pci_dev *pmac_agp_bridge; -static int (*pmac_agp_suspend)(struct pci_dev *bridge); -static int (*pmac_agp_resume)(struct pci_dev *bridge); - -void pmac_register_agp_pm(struct pci_dev *bridge, - int (*suspend)(struct pci_dev *bridge), - int (*resume)(struct pci_dev *bridge)) -{ - if (suspend || resume) { - pmac_agp_bridge = bridge; - pmac_agp_suspend = suspend; - pmac_agp_resume = resume; - return; - } - if (bridge != pmac_agp_bridge) - return; - pmac_agp_suspend = pmac_agp_resume = NULL; - return; -} -EXPORT_SYMBOL(pmac_register_agp_pm); - -void pmac_suspend_agp_for_card(struct pci_dev *dev) -{ - if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) - return; - if (pmac_agp_bridge->bus != dev->bus) - return; - pmac_agp_suspend(pmac_agp_bridge); -} -EXPORT_SYMBOL(pmac_suspend_agp_for_card); - -void pmac_resume_agp_for_card(struct pci_dev *dev) -{ - if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) - return; - if (pmac_agp_bridge->bus != dev->bus) - return; - pmac_agp_resume(pmac_agp_bridge); -} -EXPORT_SYMBOL(pmac_resume_agp_for_card); diff --git a/arch/ppc/platforms/pmac_low_i2c.c b/arch/ppc/platforms/pmac_low_i2c.c deleted file mode 100644 index 08583fce16..0000000000 --- a/arch/ppc/platforms/pmac_low_i2c.c +++ /dev/null @@ -1,511 +0,0 @@ -/* - * arch/ppc/platforms/pmac_low_i2c.c - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This file contains some low-level i2c access routines that - * need to be used by various bits of the PowerMac platform code - * at times where the real asynchronous & interrupt driven driver - * cannot be used. The API borrows some semantics from the darwin - * driver in order to ease the implementation of the platform - * properties parser - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_LOW_I2C_HOST 4 - -#if 1 -#define DBG(x...) do {\ - printk(KERN_DEBUG "KW:" x); \ - } while(0) -#else -#define DBGG(x...) -#endif - -struct low_i2c_host; - -typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len); - -struct low_i2c_host -{ - struct device_node *np; /* OF device node */ - struct semaphore mutex; /* Access mutex for use by i2c-keywest */ - low_i2c_func_t func; /* Access function */ - int is_open : 1; /* Poor man's access control */ - int mode; /* Current mode */ - int channel; /* Current channel */ - int num_channels; /* Number of channels */ - void __iomem * base; /* For keywest-i2c, base address */ - int bsteps; /* And register stepping */ - int speed; /* And speed */ -}; - -static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST]; - -/* No locking is necessary on allocation, we are running way before - * anything can race with us - */ -static struct low_i2c_host *find_low_i2c_host(struct device_node *np) -{ - int i; - - for (i = 0; i < MAX_LOW_I2C_HOST; i++) - if (low_i2c_hosts[i].np == np) - return &low_i2c_hosts[i]; - return NULL; -} - -/* - * - * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's) - * - */ - -/* - * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h, - * should be moved somewhere in include/asm-ppc/ - */ -/* Register indices */ -typedef enum { - reg_mode = 0, - reg_control, - reg_status, - reg_isr, - reg_ier, - reg_addr, - reg_subaddr, - reg_data -} reg_t; - - -/* Mode register */ -#define KW_I2C_MODE_100KHZ 0x00 -#define KW_I2C_MODE_50KHZ 0x01 -#define KW_I2C_MODE_25KHZ 0x02 -#define KW_I2C_MODE_DUMB 0x00 -#define KW_I2C_MODE_STANDARD 0x04 -#define KW_I2C_MODE_STANDARDSUB 0x08 -#define KW_I2C_MODE_COMBINED 0x0C -#define KW_I2C_MODE_MODE_MASK 0x0C -#define KW_I2C_MODE_CHAN_MASK 0xF0 - -/* Control register */ -#define KW_I2C_CTL_AAK 0x01 -#define KW_I2C_CTL_XADDR 0x02 -#define KW_I2C_CTL_STOP 0x04 -#define KW_I2C_CTL_START 0x08 - -/* Status register */ -#define KW_I2C_STAT_BUSY 0x01 -#define KW_I2C_STAT_LAST_AAK 0x02 -#define KW_I2C_STAT_LAST_RW 0x04 -#define KW_I2C_STAT_SDA 0x08 -#define KW_I2C_STAT_SCL 0x10 - -/* IER & ISR registers */ -#define KW_I2C_IRQ_DATA 0x01 -#define KW_I2C_IRQ_ADDR 0x02 -#define KW_I2C_IRQ_STOP 0x04 -#define KW_I2C_IRQ_START 0x08 -#define KW_I2C_IRQ_MASK 0x0F - -/* State machine states */ -enum { - state_idle, - state_addr, - state_read, - state_write, - state_stop, - state_dead -}; - -#define WRONG_STATE(name) do {\ - printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ - name, __kw_state_names[state], isr); \ - } while(0) - -static const char *__kw_state_names[] = { - "state_idle", - "state_addr", - "state_read", - "state_write", - "state_stop", - "state_dead" -}; - -static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg) -{ - return in_8(host->base + (((unsigned)reg) << host->bsteps)); -} - -static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val) -{ - out_8(host->base + (((unsigned)reg) << host->bsteps), val); - (void)__kw_read_reg(host, reg_subaddr); -} - -#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) -#define kw_read_reg(reg) __kw_read_reg(host, reg) - - -/* Don't schedule, the g5 fan controller is too - * timing sensitive - */ -static u8 kw_wait_interrupt(struct low_i2c_host* host) -{ - int i; - u8 isr; - - for (i = 0; i < 200000; i++) { - isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; - if (isr != 0) - return isr; - udelay(1); - } - return isr; -} - -static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr) -{ - u8 ack; - - if (isr == 0) { - if (state != state_stop) { - DBG("KW: Timeout !\n"); - *rc = -EIO; - goto stop; - } - if (state == state_stop) { - ack = kw_read_reg(reg_status); - if (!(ack & KW_I2C_STAT_BUSY)) { - state = state_idle; - kw_write_reg(reg_ier, 0x00); - } - } - return state; - } - - if (isr & KW_I2C_IRQ_ADDR) { - ack = kw_read_reg(reg_status); - if (state != state_addr) { - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); - WRONG_STATE("KW_I2C_IRQ_ADDR"); - *rc = -EIO; - goto stop; - } - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - *rc = -ENODEV; - DBG("KW: NAK on address\n"); - return state_stop; - } else { - if (rw) { - state = state_read; - if (*len > 1) - kw_write_reg(reg_control, KW_I2C_CTL_AAK); - } else { - state = state_write; - kw_write_reg(reg_data, **data); - (*data)++; (*len)--; - } - } - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); - } - - if (isr & KW_I2C_IRQ_DATA) { - if (state == state_read) { - **data = kw_read_reg(reg_data); - (*data)++; (*len)--; - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - if ((*len) == 0) - state = state_stop; - else if ((*len) == 1) - kw_write_reg(reg_control, 0); - } else if (state == state_write) { - ack = kw_read_reg(reg_status); - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - DBG("KW: nack on data write\n"); - *rc = -EIO; - goto stop; - } else if (*len) { - kw_write_reg(reg_data, **data); - (*data)++; (*len)--; - } else { - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - state = state_stop; - *rc = 0; - } - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - } else { - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - WRONG_STATE("KW_I2C_IRQ_DATA"); - if (state != state_stop) { - *rc = -EIO; - goto stop; - } - } - } - - if (isr & KW_I2C_IRQ_STOP) { - kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); - if (state != state_stop) { - WRONG_STATE("KW_I2C_IRQ_STOP"); - *rc = -EIO; - } - return state_idle; - } - - if (isr & KW_I2C_IRQ_START) - kw_write_reg(reg_isr, KW_I2C_IRQ_START); - - return state; - - stop: - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - return state_stop; -} - -static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len) -{ - u8 mode_reg = host->speed; - int state = state_addr; - int rc = 0; - - /* Setup mode & subaddress if any */ - switch(host->mode) { - case pmac_low_i2c_mode_dumb: - printk(KERN_ERR "low_i2c: Dumb mode not supported !\n"); - return -EINVAL; - case pmac_low_i2c_mode_std: - mode_reg |= KW_I2C_MODE_STANDARD; - break; - case pmac_low_i2c_mode_stdsub: - mode_reg |= KW_I2C_MODE_STANDARDSUB; - kw_write_reg(reg_subaddr, subaddr); - break; - case pmac_low_i2c_mode_combined: - mode_reg |= KW_I2C_MODE_COMBINED; - kw_write_reg(reg_subaddr, subaddr); - break; - } - - /* Setup channel & clear pending irqs */ - kw_write_reg(reg_isr, kw_read_reg(reg_isr)); - kw_write_reg(reg_mode, mode_reg | (host->channel << 4)); - kw_write_reg(reg_status, 0); - - /* Set up address and r/w bit */ - kw_write_reg(reg_addr, addr); - - /* Start sending address & disable interrupt*/ - kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/); - kw_write_reg(reg_control, KW_I2C_CTL_XADDR); - - /* State machine, to turn into an interrupt handler */ - while(state != state_idle) { - u8 isr = kw_wait_interrupt(host); - state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr); - } - - return rc; -} - -static void keywest_low_i2c_add(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(NULL); - unsigned long *psteps, *prate, steps, aoffset = 0; - struct device_node *parent; - - if (host == NULL) { - printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", - np->full_name); - return; - } - memset(host, 0, sizeof(*host)); - - init_MUTEX(&host->mutex); - host->np = of_node_get(np); - psteps = (unsigned long *)get_property(np, "AAPL,address-step", NULL); - steps = psteps ? (*psteps) : 0x10; - for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) - steps >>= 1; - parent = of_get_parent(np); - host->num_channels = 1; - if (parent && parent->name[0] == 'u') { - host->num_channels = 2; - aoffset = 3; - } - /* Select interface rate */ - host->speed = KW_I2C_MODE_100KHZ; - prate = (unsigned long *)get_property(np, "AAPL,i2c-rate", NULL); - if (prate) switch(*prate) { - case 100: - host->speed = KW_I2C_MODE_100KHZ; - break; - case 50: - host->speed = KW_I2C_MODE_50KHZ; - break; - case 25: - host->speed = KW_I2C_MODE_25KHZ; - break; - } - host->mode = pmac_low_i2c_mode_std; - host->base = ioremap(np->addrs[0].address + aoffset, - np->addrs[0].size); - host->func = keywest_low_i2c_func; -} - -/* - * - * PMU implementation - * - */ - - -#ifdef CONFIG_ADB_PMU - -static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len) -{ - // TODO - return -ENODEV; -} - -static void pmu_low_i2c_add(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(NULL); - - if (host == NULL) { - printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", - np->full_name); - return; - } - memset(host, 0, sizeof(*host)); - - init_MUTEX(&host->mutex); - host->np = of_node_get(np); - host->num_channels = 3; - host->mode = pmac_low_i2c_mode_std; - host->func = pmu_low_i2c_func; -} - -#endif /* CONFIG_ADB_PMU */ - -void __init pmac_init_low_i2c(void) -{ - struct device_node *np; - - /* Probe keywest-i2c busses */ - np = of_find_compatible_node(NULL, "i2c", "keywest-i2c"); - while(np) { - keywest_low_i2c_add(np); - np = of_find_compatible_node(np, "i2c", "keywest-i2c"); - } - -#ifdef CONFIG_ADB_PMU - /* Probe PMU busses */ - np = of_find_node_by_name(NULL, "via-pmu"); - if (np) - pmu_low_i2c_add(np); -#endif /* CONFIG_ADB_PMU */ - - /* TODO: Add CUDA support as well */ -} - -int pmac_low_i2c_lock(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - down(&host->mutex); - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_lock); - -int pmac_low_i2c_unlock(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - up(&host->mutex); - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_unlock); - - -int pmac_low_i2c_open(struct device_node *np, int channel) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - - if (channel >= host->num_channels) - return -EINVAL; - - down(&host->mutex); - host->is_open = 1; - host->channel = channel; - - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_open); - -int pmac_low_i2c_close(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - - host->is_open = 0; - up(&host->mutex); - - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_close); - -int pmac_low_i2c_setmode(struct device_node *np, int mode) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - WARN_ON(!host->is_open); - host->mode = mode; - - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_setmode); - -int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - WARN_ON(!host->is_open); - - return host->func(host, addrdir, subaddr, data, len); -} -EXPORT_SYMBOL(pmac_low_i2c_xfer); - diff --git a/arch/ppc/platforms/pmac_nvram.c b/arch/ppc/platforms/pmac_nvram.c deleted file mode 100644 index 8c9b008c72..0000000000 --- a/arch/ppc/platforms/pmac_nvram.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - * arch/ppc/platforms/pmac_nvram.c - * - * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Todo: - add support for the OF persistent properties - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */ - -#define CORE99_SIGNATURE 0x5a -#define CORE99_ADLER_START 0x14 - -/* On Core99, nvram is either a sharp, a micron or an AMD flash */ -#define SM_FLASH_STATUS_DONE 0x80 -#define SM_FLASH_STATUS_ERR 0x38 -#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0 -#define SM_FLASH_CMD_ERASE_SETUP 0x20 -#define SM_FLASH_CMD_RESET 0xff -#define SM_FLASH_CMD_WRITE_SETUP 0x40 -#define SM_FLASH_CMD_CLEAR_STATUS 0x50 -#define SM_FLASH_CMD_READ_STATUS 0x70 - -/* CHRP NVRAM header */ -struct chrp_header { - u8 signature; - u8 cksum; - u16 len; - char name[12]; - u8 data[0]; -}; - -struct core99_header { - struct chrp_header hdr; - u32 adler; - u32 generation; - u32 reserved[2]; -}; - -/* - * Read and write the non-volatile RAM on PowerMacs and CHRP machines. - */ -static int nvram_naddrs; -static volatile unsigned char *nvram_addr; -static volatile unsigned char *nvram_data; -static int nvram_mult, is_core_99; -static int core99_bank = 0; -static int nvram_partitions[3]; -static DEFINE_SPINLOCK(nv_lock); - -extern int pmac_newworld; -extern int system_running; - -static int (*core99_write_bank)(int bank, u8* datas); -static int (*core99_erase_bank)(int bank); - -static char *nvram_image; - - -static unsigned char core99_nvram_read_byte(int addr) -{ - if (nvram_image == NULL) - return 0xff; - return nvram_image[addr]; -} - -static void core99_nvram_write_byte(int addr, unsigned char val) -{ - if (nvram_image == NULL) - return; - nvram_image[addr] = val; -} - - -static unsigned char direct_nvram_read_byte(int addr) -{ - return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]); -} - -static void direct_nvram_write_byte(int addr, unsigned char val) -{ - out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val); -} - - -static unsigned char indirect_nvram_read_byte(int addr) -{ - unsigned char val; - unsigned long flags; - - spin_lock_irqsave(&nv_lock, flags); - out_8(nvram_addr, addr >> 5); - val = in_8(&nvram_data[(addr & 0x1f) << 4]); - spin_unlock_irqrestore(&nv_lock, flags); - - return val; -} - -static void indirect_nvram_write_byte(int addr, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&nv_lock, flags); - out_8(nvram_addr, addr >> 5); - out_8(&nvram_data[(addr & 0x1f) << 4], val); - spin_unlock_irqrestore(&nv_lock, flags); -} - - -#ifdef CONFIG_ADB_PMU - -static void pmu_nvram_complete(struct adb_request *req) -{ - if (req->arg) - complete((struct completion *)req->arg); -} - -static unsigned char pmu_nvram_read_byte(int addr) -{ - struct adb_request req; - DECLARE_COMPLETION(req_complete); - - req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; - if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM, - (addr >> 8) & 0xff, addr & 0xff)) - return 0xff; - if (system_state == SYSTEM_RUNNING) - wait_for_completion(&req_complete); - while (!req.complete) - pmu_poll(); - return req.reply[0]; -} - -static void pmu_nvram_write_byte(int addr, unsigned char val) -{ - struct adb_request req; - DECLARE_COMPLETION(req_complete); - - req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; - if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM, - (addr >> 8) & 0xff, addr & 0xff, val)) - return; - if (system_state == SYSTEM_RUNNING) - wait_for_completion(&req_complete); - while (!req.complete) - pmu_poll(); -} - -#endif /* CONFIG_ADB_PMU */ - - -static u8 chrp_checksum(struct chrp_header* hdr) -{ - u8 *ptr; - u16 sum = hdr->signature; - for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++) - sum += *ptr; - while (sum > 0xFF) - sum = (sum & 0xFF) + (sum>>8); - return sum; -} - -static u32 core99_calc_adler(u8 *buffer) -{ - int cnt; - u32 low, high; - - buffer += CORE99_ADLER_START; - low = 1; - high = 0; - for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) { - if ((cnt % 5000) == 0) { - high %= 65521UL; - high %= 65521UL; - } - low += buffer[cnt]; - high += low; - } - low %= 65521UL; - high %= 65521UL; - - return (high << 16) | low; -} - -static u32 core99_check(u8* datas) -{ - struct core99_header* hdr99 = (struct core99_header*)datas; - - if (hdr99->hdr.signature != CORE99_SIGNATURE) { - DBG("Invalid signature\n"); - return 0; - } - if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) { - DBG("Invalid checksum\n"); - return 0; - } - if (hdr99->adler != core99_calc_adler(datas)) { - DBG("Invalid adler\n"); - return 0; - } - return hdr99->generation; -} - -static int sm_erase_bank(int bank) -{ - int stat, i; - unsigned long timeout; - - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; - - DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); - - out_8(base, SM_FLASH_CMD_ERASE_SETUP); - out_8(base, SM_FLASH_CMD_ERASE_CONFIRM); - timeout = 0; - do { - if (++timeout > 1000000) { - printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n"); - break; - } - out_8(base, SM_FLASH_CMD_READ_STATUS); - stat = in_8(base); - } while (!(stat & SM_FLASH_STATUS_DONE)); - - out_8(base, SM_FLASH_CMD_CLEAR_STATUS); - out_8(base, SM_FLASH_CMD_RESET); - - for (i=0; i 1000000) { - printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n"); - break; - } - out_8(base, SM_FLASH_CMD_READ_STATUS); - stat = in_8(base); - } while (!(stat & SM_FLASH_STATUS_DONE)); - if (!(stat & SM_FLASH_STATUS_DONE)) - break; - } - out_8(base, SM_FLASH_CMD_CLEAR_STATUS); - out_8(base, SM_FLASH_CMD_RESET); - for (i=0; i 1000000) { - printk(KERN_ERR "nvram: AMD flash erase timeout !\n"); - break; - } - stat = in_8(base) ^ in_8(base); - } while (stat != 0); - - /* Reset */ - out_8(base, 0xf0); - udelay(1); - - for (i=0; i 1000000) { - printk(KERN_ERR "nvram: AMD flash write timeout !\n"); - break; - } - stat = in_8(base) ^ in_8(base); - } while (stat != 0); - if (stat != 0) - break; - } - - /* Reset */ - out_8(base, 0xf0); - udelay(1); - - for (i=0; iname, "common")) - nvram_partitions[pmac_nvram_OF] = offset + 0x10; - if (!strcmp(hdr->name, "APL,MacOS75")) { - nvram_partitions[pmac_nvram_XPRAM] = offset + 0x10; - nvram_partitions[pmac_nvram_NR] = offset + 0x110; - } - offset += (hdr->len * 0x10); - } while(offset < NVRAM_SIZE); - } else { - nvram_partitions[pmac_nvram_OF] = 0x1800; - nvram_partitions[pmac_nvram_XPRAM] = 0x1300; - nvram_partitions[pmac_nvram_NR] = 0x1400; - } - DBG("nvram: OF partition at 0x%x\n", nvram_partitions[pmac_nvram_OF]); - DBG("nvram: XP partition at 0x%x\n", nvram_partitions[pmac_nvram_XPRAM]); - DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]); -} - -static void core99_nvram_sync(void) -{ - struct core99_header* hdr99; - unsigned long flags; - - if (!is_core_99 || !nvram_data || !nvram_image) - return; - - spin_lock_irqsave(&nv_lock, flags); - if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE, - NVRAM_SIZE)) - goto bail; - - DBG("Updating nvram...\n"); - - hdr99 = (struct core99_header*)nvram_image; - hdr99->generation++; - hdr99->hdr.signature = CORE99_SIGNATURE; - hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr); - hdr99->adler = core99_calc_adler(nvram_image); - core99_bank = core99_bank ? 0 : 1; - if (core99_erase_bank) - if (core99_erase_bank(core99_bank)) { - printk("nvram: Error erasing bank %d\n", core99_bank); - goto bail; - } - if (core99_write_bank) - if (core99_write_bank(core99_bank, nvram_image)) - printk("nvram: Error writing bank %d\n", core99_bank); - bail: - spin_unlock_irqrestore(&nv_lock, flags); - -#ifdef DEBUG - mdelay(2000); -#endif -} - -void __init pmac_nvram_init(void) -{ - struct device_node *dp; - - nvram_naddrs = 0; - - dp = find_devices("nvram"); - if (dp == NULL) { - printk(KERN_ERR "Can't find NVRAM device\n"); - return; - } - nvram_naddrs = dp->n_addrs; - is_core_99 = device_is_compatible(dp, "nvram,flash"); - if (is_core_99) { - int i; - u32 gen_bank0, gen_bank1; - - if (nvram_naddrs < 1) { - printk(KERN_ERR "nvram: no address\n"); - return; - } - nvram_image = alloc_bootmem(NVRAM_SIZE); - if (nvram_image == NULL) { - printk(KERN_ERR "nvram: can't allocate ram image\n"); - return; - } - nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2); - nvram_naddrs = 1; /* Make sure we get the correct case */ - - DBG("nvram: Checking bank 0...\n"); - - gen_bank0 = core99_check((u8 *)nvram_data); - gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE); - core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0; - - DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1); - DBG("nvram: Active bank is: %d\n", core99_bank); - - for (i=0; iaddrs[0].address + isa_mem_base, - dp->addrs[0].size); - nvram_mult = 1; - ppc_md.nvram_read_val = direct_nvram_read_byte; - ppc_md.nvram_write_val = direct_nvram_write_byte; - } else if (nvram_naddrs == 1) { - nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size); - nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE; - ppc_md.nvram_read_val = direct_nvram_read_byte; - ppc_md.nvram_write_val = direct_nvram_write_byte; - } else if (nvram_naddrs == 2) { - nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size); - nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size); - ppc_md.nvram_read_val = indirect_nvram_read_byte; - ppc_md.nvram_write_val = indirect_nvram_write_byte; - } else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) { -#ifdef CONFIG_ADB_PMU - nvram_naddrs = -1; - ppc_md.nvram_read_val = pmu_nvram_read_byte; - ppc_md.nvram_write_val = pmu_nvram_write_byte; -#endif /* CONFIG_ADB_PMU */ - } else { - printk(KERN_ERR "Don't know how to access NVRAM with %d addresses\n", - nvram_naddrs); - } - lookup_partitions(); -} - -int pmac_get_partition(int partition) -{ - return nvram_partitions[partition]; -} - -u8 pmac_xpram_read(int xpaddr) -{ - int offset = nvram_partitions[pmac_nvram_XPRAM]; - - if (offset < 0) - return 0xff; - - return ppc_md.nvram_read_val(xpaddr + offset); -} - -void pmac_xpram_write(int xpaddr, u8 data) -{ - int offset = nvram_partitions[pmac_nvram_XPRAM]; - - if (offset < 0) - return; - - ppc_md.nvram_write_val(xpaddr + offset, data); -} - -EXPORT_SYMBOL(pmac_get_partition); -EXPORT_SYMBOL(pmac_xpram_read); -EXPORT_SYMBOL(pmac_xpram_write); diff --git a/arch/ppc/platforms/pmac_pci.c b/arch/ppc/platforms/pmac_pci.c deleted file mode 100644 index 786295b6dd..0000000000 --- a/arch/ppc/platforms/pmac_pci.c +++ /dev/null @@ -1,1124 +0,0 @@ -/* - * Support for PCI bridges found on Power Macintoshes. - * At present the "bandit" and "chaos" bridges are supported. - * Fortunately you access configuration space in the same - * way with either bridge. - * - * Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#undef DEBUG - -#ifdef DEBUG -#ifdef CONFIG_XMON -extern void xmon_printf(const char *fmt, ...); -#define DBG(x...) xmon_printf(x) -#else -#define DBG(x...) printk(x) -#endif -#else -#define DBG(x...) -#endif - -static int add_bridge(struct device_node *dev); -extern void pmac_check_ht_link(void); - -/* XXX Could be per-controller, but I don't think we risk anything by - * assuming we won't have both UniNorth and Bandit */ -static int has_uninorth; -#ifdef CONFIG_POWER4 -static struct pci_controller *u3_agp; -#endif /* CONFIG_POWER4 */ - -extern u8 pci_cache_line_size; -extern int pcibios_assign_bus_offset; - -struct device_node *k2_skiplist[2]; - -/* - * Magic constants for enabling cache coherency in the bandit/PSX bridge. - */ -#define BANDIT_DEVID_2 8 -#define BANDIT_REVID 3 - -#define BANDIT_DEVNUM 11 -#define BANDIT_MAGIC 0x50 -#define BANDIT_COHERENT 0x40 - -static int __init -fixup_one_level_bus_range(struct device_node *node, int higher) -{ - for (; node != 0;node = node->sibling) { - int * bus_range; - unsigned int *class_code; - int len; - - /* For PCI<->PCI bridges or CardBus bridges, we go down */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range != NULL && len > 2 * sizeof(int)) { - if (bus_range[1] > higher) - higher = bus_range[1]; - } - higher = fixup_one_level_bus_range(node->child, higher); - } - return higher; -} - -/* This routine fixes the "bus-range" property of all bridges in the - * system since they tend to have their "last" member wrong on macs - * - * Note that the bus numbers manipulated here are OF bus numbers, they - * are not Linux bus numbers. - */ -static void __init -fixup_bus_range(struct device_node *bridge) -{ - int * bus_range; - int len; - - /* Lookup the "bus-range" property for the hose */ - bus_range = (int *) get_property(bridge, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - bridge->full_name); - return; - } - bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); -} - -/* - * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. - * - * The "Bandit" version is present in all early PCI PowerMacs, - * and up to the first ones using Grackle. Some machines may - * have 2 bandit controllers (2 PCI busses). - * - * "Chaos" is used in some "Bandit"-type machines as a bridge - * for the separate display bus. It is accessed the same - * way as bandit, but cannot be probed for devices. It therefore - * has its own config access functions. - * - * The "UniNorth" version is present in all Core99 machines - * (iBook, G4, new IMacs, and all the recent Apple machines). - * It contains 3 controllers in one ASIC. - * - * The U3 is the bridge used on G5 machines. It contains an - * AGP bus which is dealt with the old UniNorth access routines - * and a HyperTransport bus which uses its own set of access - * functions. - */ - -#define MACRISC_CFA0(devfn, off) \ - ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ - | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ - | (((unsigned long)(off)) & 0xFCUL)) - -#define MACRISC_CFA1(bus, devfn, off) \ - ((((unsigned long)(bus)) << 16) \ - |(((unsigned long)(devfn)) << 8) \ - |(((unsigned long)(off)) & 0xFCUL) \ - |1UL) - -static void volatile __iomem * -macrisc_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset) -{ - unsigned int caddr; - - if (bus == hose->first_busno) { - if (dev_fn < (11 << 3)) - return NULL; - caddr = MACRISC_CFA0(dev_fn, offset); - } else - caddr = MACRISC_CFA1(bus, dev_fn, offset); - - /* Uninorth will return garbage if we don't read back the value ! */ - do { - out_le32(hose->cfg_addr, caddr); - } while (in_le32(hose->cfg_addr) != caddr); - - offset &= has_uninorth ? 0x07 : 0x03; - return hose->cfg_data + offset; -} - -static int -macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = bus->sysdata; - void volatile __iomem *addr; - - addr = macrisc_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8(addr); - break; - case 2: - *val = in_le16(addr); - break; - default: - *val = in_le32(addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int -macrisc_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - void volatile __iomem *addr; - - addr = macrisc_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8(addr, val); - (void) in_8(addr); - break; - case 2: - out_le16(addr, val); - (void) in_le16(addr); - break; - default: - out_le32(addr, val); - (void) in_le32(addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops macrisc_pci_ops = -{ - macrisc_read_config, - macrisc_write_config -}; - -/* - * Verifiy that a specific (bus, dev_fn) exists on chaos - */ -static int -chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) -{ - struct device_node *np; - u32 *vendor, *device; - - np = pci_busdev_to_OF_node(bus, devfn); - if (np == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - vendor = (u32 *)get_property(np, "vendor-id", NULL); - device = (u32 *)get_property(np, "device-id", NULL); - if (vendor == NULL || device == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) - && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - return PCIBIOS_SUCCESSFUL; -} - -static int -chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - int result = chaos_validate_dev(bus, devfn, offset); - if (result == PCIBIOS_BAD_REGISTER_NUMBER) - *val = ~0U; - if (result != PCIBIOS_SUCCESSFUL) - return result; - return macrisc_read_config(bus, devfn, offset, len, val); -} - -static int -chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - int result = chaos_validate_dev(bus, devfn, offset); - if (result != PCIBIOS_SUCCESSFUL) - return result; - return macrisc_write_config(bus, devfn, offset, len, val); -} - -static struct pci_ops chaos_pci_ops = -{ - chaos_read_config, - chaos_write_config -}; - -#ifdef CONFIG_POWER4 - -/* - * These versions of U3 HyperTransport config space access ops do not - * implement self-view of the HT host yet - */ - -#define U3_HT_CFA0(devfn, off) \ - ((((unsigned long)devfn) << 8) | offset) -#define U3_HT_CFA1(bus, devfn, off) \ - (U3_HT_CFA0(devfn, off) \ - + (((unsigned long)bus) << 16) \ - + 0x01000000UL) - -static void volatile __iomem * -u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset) -{ - if (bus == hose->first_busno) { - /* For now, we don't self probe U3 HT bridge */ - if (PCI_FUNC(devfn) != 0 || PCI_SLOT(devfn) > 7 || - PCI_SLOT(devfn) < 1) - return 0; - return hose->cfg_data + U3_HT_CFA0(devfn, offset); - } else - return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset); -} - -static int -u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = bus->sysdata; - void volatile __iomem *addr; - int i; - - struct device_node *np = pci_busdev_to_OF_node(bus, devfn); - if (np == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* - * When a device in K2 is powered down, we die on config - * cycle accesses. Fix that here. - */ - for (i=0; i<2; i++) - if (k2_skiplist[i] == np) { - switch (len) { - case 1: - *val = 0xff; break; - case 2: - *val = 0xffff; break; - default: - *val = 0xfffffffful; break; - } - return PCIBIOS_SUCCESSFUL; - } - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8(addr); - break; - case 2: - *val = in_le16(addr); - break; - default: - *val = in_le32(addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int -u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - void volatile __iomem *addr; - int i; - - struct device_node *np = pci_busdev_to_OF_node(bus, devfn); - if (np == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * When a device in K2 is powered down, we die on config - * cycle accesses. Fix that here. - */ - for (i=0; i<2; i++) - if (k2_skiplist[i] == np) - return PCIBIOS_SUCCESSFUL; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8(addr, val); - (void) in_8(addr); - break; - case 2: - out_le16(addr, val); - (void) in_le16(addr); - break; - default: - out_le32(addr, val); - (void) in_le32(addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops u3_ht_pci_ops = -{ - u3_ht_read_config, - u3_ht_write_config -}; - -#endif /* CONFIG_POWER4 */ - -/* - * For a bandit bridge, turn on cache coherency if necessary. - * N.B. we could clean this up using the hose ops directly. - */ -static void __init -init_bandit(struct pci_controller *bp) -{ - unsigned int vendev, magic; - int rev; - - /* read the word at offset 0 in config space for device 11 */ - out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); - udelay(2); - vendev = in_le32(bp->cfg_data); - if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + - PCI_VENDOR_ID_APPLE) { - /* read the revision id */ - out_le32(bp->cfg_addr, - (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); - udelay(2); - rev = in_8(bp->cfg_data); - if (rev != BANDIT_REVID) - printk(KERN_WARNING - "Unknown revision %d for bandit\n", rev); - } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { - printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); - return; - } - - /* read the word at offset 0x50 */ - out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); - udelay(2); - magic = in_le32(bp->cfg_data); - if ((magic & BANDIT_COHERENT) != 0) - return; - magic |= BANDIT_COHERENT; - udelay(2); - out_le32(bp->cfg_data, magic); - printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); -} - - -/* - * Tweak the PCI-PCI bridge chip on the blue & white G3s. - */ -static void __init -init_p2pbridge(void) -{ - struct device_node *p2pbridge; - struct pci_controller* hose; - u8 bus, devfn; - u16 val; - - /* XXX it would be better here to identify the specific - PCI-PCI bridge chip we have. */ - if ((p2pbridge = find_devices("pci-bridge")) == 0 - || p2pbridge->parent == NULL - || strcmp(p2pbridge->parent->name, "pci") != 0) - return; - if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { - DBG("Can't find PCI infos for PCI<->PCI bridge\n"); - return; - } - /* Warning: At this point, we have not yet renumbered all busses. - * So we must use OF walking to find out hose - */ - hose = pci_find_hose_for_OF_device(p2pbridge); - if (!hose) { - DBG("Can't find hose for PCI<->PCI bridge\n"); - return; - } - if (early_read_config_word(hose, bus, devfn, - PCI_BRIDGE_CONTROL, &val) < 0) { - printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n"); - return; - } - val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; - early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); -} - -/* - * Some Apple desktop machines have a NEC PD720100A USB2 controller - * on the motherboard. Open Firmware, on these, will disable the - * EHCI part of it so it behaves like a pair of OHCI's. This fixup - * code re-enables it ;) - */ -static void __init -fixup_nec_usb2(void) -{ - struct device_node *nec; - - for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) { - struct pci_controller *hose; - u32 data, *prop; - u8 bus, devfn; - - prop = (u32 *)get_property(nec, "vendor-id", NULL); - if (prop == NULL) - continue; - if (0x1033 != *prop) - continue; - prop = (u32 *)get_property(nec, "device-id", NULL); - if (prop == NULL) - continue; - if (0x0035 != *prop) - continue; - prop = (u32 *)get_property(nec, "reg", NULL); - if (prop == NULL) - continue; - devfn = (prop[0] >> 8) & 0xff; - bus = (prop[0] >> 16) & 0xff; - if (PCI_FUNC(devfn) != 0) - continue; - hose = pci_find_hose_for_OF_device(nec); - if (!hose) - continue; - early_read_config_dword(hose, bus, devfn, 0xe4, &data); - if (data & 1UL) { - printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n"); - data &= ~1UL; - early_write_config_dword(hose, bus, devfn, 0xe4, data); - early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE, - nec->intrs[0].line); - } - } -} - -void __init -pmac_find_bridges(void) -{ - struct device_node *np, *root; - struct device_node *ht = NULL; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); - return; - } - for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { - if (np->name == NULL) - continue; - if (strcmp(np->name, "bandit") == 0 - || strcmp(np->name, "chaos") == 0 - || strcmp(np->name, "pci") == 0) { - if (add_bridge(np) == 0) - of_node_get(np); - } - if (strcmp(np->name, "ht") == 0) { - of_node_get(np); - ht = np; - } - } - of_node_put(root); - - /* Probe HT last as it relies on the agp resources to be already - * setup - */ - if (ht && add_bridge(ht) != 0) - of_node_put(ht); - - init_p2pbridge(); - fixup_nec_usb2(); - - /* We are still having some issues with the Xserve G4, enabling - * some offset between bus number and domains for now when we - * assign all busses should help for now - */ - if (pci_assign_all_buses) - pcibios_assign_bus_offset = 0x10; - -#ifdef CONFIG_POWER4 - /* There is something wrong with DMA on U3/HT. I haven't figured out - * the details yet, but if I set the cache line size to 128 bytes like - * it should, I'm getting memory corruption caused by devices like - * sungem (even without the MWI bit set, but maybe sungem doesn't - * care). Right now, it appears that setting up a 64 bytes line size - * works properly, 64 bytes beeing the max transfer size of HT, I - * suppose this is related the way HT/PCI are hooked together. I still - * need to dive into more specs though to be really sure of what's - * going on. --BenH. - * - * Ok, apparently, it's just that HT can't do more than 64 bytes - * transactions. MWI seem to be meaningless there as well, it may - * be worth nop'ing out pci_set_mwi too though I haven't done that - * yet. - * - * Note that it's a bit different for whatever is in the AGP slot. - * For now, I don't care, but this can become a real issue, we - * should probably hook pci_set_mwi anyway to make sure it sets - * the real cache line size in there. - */ - if (machine_is_compatible("MacRISC4")) - pci_cache_line_size = 16; /* 64 bytes */ - - pmac_check_ht_link(); -#endif /* CONFIG_POWER4 */ -} - -#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \ - | (((o) & ~3) << 24)) - -#define GRACKLE_PICR1_STG 0x00000040 -#define GRACKLE_PICR1_LOOPSNOOP 0x00000010 - -/* N.B. this is called before bridges is initialized, so we can't - use grackle_pcibios_{read,write}_config_dword. */ -static inline void grackle_set_stg(struct pci_controller* bp, int enable) -{ - unsigned int val; - - out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); - val = in_le32(bp->cfg_data); - val = enable? (val | GRACKLE_PICR1_STG) : - (val & ~GRACKLE_PICR1_STG); - out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); - out_le32(bp->cfg_data, val); - (void)in_le32(bp->cfg_data); -} - -static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable) -{ - unsigned int val; - - out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); - val = in_le32(bp->cfg_data); - val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) : - (val & ~GRACKLE_PICR1_LOOPSNOOP); - out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); - out_le32(bp->cfg_data, val); - (void)in_le32(bp->cfg_data); -} - -static int __init -setup_uninorth(struct pci_controller* hose, struct reg_property* addr) -{ - pci_assign_all_buses = 1; - has_uninorth = 1; - hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); - hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); - /* We "know" that the bridge at f2000000 has the PCI slots. */ - return addr->address == 0xf2000000; -} - -static void __init -setup_bandit(struct pci_controller* hose, struct reg_property* addr) -{ - hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); - hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); - init_bandit(hose); -} - -static void __init -setup_chaos(struct pci_controller* hose, struct reg_property* addr) -{ - /* assume a `chaos' bridge */ - hose->ops = &chaos_pci_ops; - hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); - hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); -} - -#ifdef CONFIG_POWER4 - -static void __init -setup_u3_agp(struct pci_controller* hose, struct reg_property* addr) -{ - /* On G5, we move AGP up to high bus number so we don't need - * to reassign bus numbers for HT. If we ever have P2P bridges - * on AGP, we'll have to move pci_assign_all_buses to the - * pci_controller structure so we enable it for AGP and not for - * HT childs. - * We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->first_busno = 0xf0; - hose->last_busno = 0xff; - has_uninorth = 1; - hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); - hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - - u3_agp = hose; -} - -static void __init -setup_u3_ht(struct pci_controller* hose, struct reg_property *addr) -{ - struct device_node *np = (struct device_node *)hose->arch_data; - int i, cur; - - hose->ops = &u3_ht_pci_ops; - - /* We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->cfg_data = ioremap(0xf2000000, 0x02000000); - - /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read its configuration register (if any). - */ - hose->io_base_phys = 0xf4000000; - hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000); - isa_io_base = (unsigned long) hose->io_base_virt; - hose->io_resource.name = np->full_name; - hose->io_resource.start = 0; - hose->io_resource.end = 0x003fffff; - hose->io_resource.flags = IORESOURCE_IO; - hose->pci_mem_offset = 0; - hose->first_busno = 0; - hose->last_busno = 0xef; - hose->mem_resources[0].name = np->full_name; - hose->mem_resources[0].start = 0x80000000; - hose->mem_resources[0].end = 0xefffffff; - hose->mem_resources[0].flags = IORESOURCE_MEM; - - if (u3_agp == NULL) { - DBG("U3 has no AGP, using full resource range\n"); - return; - } - - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered - */ - cur = 0; - for (i=0; i<3; i++) { - struct resource *res = &u3_agp->mem_resources[i]; - if (res->flags != IORESOURCE_MEM) - continue; - /* We don't care about "fine" resources */ - if (res->start >= 0xf0000000) - continue; - /* Check if it's just a matter of "shrinking" us in one direction */ - if (hose->mem_resources[cur].start == res->start) { - DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); - hose->mem_resources[cur].start = res->end + 1; - continue; - } - if (hose->mem_resources[cur].end == res->end) { - DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); - hose->mem_resources[cur].end = res->start - 1; - continue; - } - /* No, it's not the case, we need a hole */ - if (cur == 2) { - /* not enough resources to make a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); - hose->mem_resources[cur].end = res->start - 1; - continue; - } - cur++; - DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", - cur-1, res->start - 1, cur, res->end + 1); - hose->mem_resources[cur].name = np->full_name; - hose->mem_resources[cur].flags = IORESOURCE_MEM; - hose->mem_resources[cur].start = res->end + 1; - hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; - hose->mem_resources[cur-1].end = res->start - 1; - } -} - -#endif /* CONFIG_POWER4 */ - -void __init -setup_grackle(struct pci_controller *hose) -{ - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); - if (machine_is_compatible("AAPL,PowerBook1998")) - grackle_set_loop_snoop(hose, 1); -#if 0 /* Disabled for now, HW problems ??? */ - grackle_set_stg(hose, 1); -#endif -} - -/* - * We assume that if we have a G3 powermac, we have one bridge called - * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, - * if we have one or more bandit or chaos bridges, we don't have a MPC106. - */ -static int __init -add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - struct reg_property *addr; - char* disp_name; - int *bus_range; - int primary = 1; - - DBG("Adding PCI host bridge %s\n", dev->full_name); - - addr = (struct reg_property *) get_property(dev, "reg", &len); - if (addr == NULL || len < sizeof(*addr)) { - printk(KERN_WARNING "Can't use %s: no address\n", - dev->full_name); - return -ENODEV; - } - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); - } - - hose = pcibios_alloc_controller(); - if (!hose) - return -ENOMEM; - hose->arch_data = dev; - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - disp_name = NULL; -#ifdef CONFIG_POWER4 - if (device_is_compatible(dev, "u3-agp")) { - setup_u3_agp(hose, addr); - disp_name = "U3-AGP"; - primary = 0; - } else if (device_is_compatible(dev, "u3-ht")) { - setup_u3_ht(hose, addr); - disp_name = "U3-HT"; - primary = 1; - } else -#endif /* CONFIG_POWER4 */ - if (device_is_compatible(dev, "uni-north")) { - primary = setup_uninorth(hose, addr); - disp_name = "UniNorth"; - } else if (strcmp(dev->name, "pci") == 0) { - /* XXX assume this is a mpc106 (grackle) */ - setup_grackle(hose); - disp_name = "Grackle (MPC106)"; - } else if (strcmp(dev->name, "bandit") == 0) { - setup_bandit(hose, addr); - disp_name = "Bandit"; - } else if (strcmp(dev->name, "chaos") == 0) { - setup_chaos(hose, addr); - disp_name = "Chaos"; - primary = 0; - } - printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n", - disp_name, addr->address, hose->first_busno, hose->last_busno); - DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", - hose, hose->cfg_addr, hose->cfg_data); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, primary); - - /* Fixup "bus-range" OF property */ - fixup_bus_range(dev); - - return 0; -} - -static void __init -pcibios_fixup_OF_interrupts(void) -{ - struct pci_dev* dev = NULL; - - /* - * Open Firmware often doesn't initialize the - * PCI_INTERRUPT_LINE config register properly, so we - * should find the device node and apply the interrupt - * obtained from the OF device-tree - */ - for_each_pci_dev(dev) { - struct device_node *node; - node = pci_device_to_OF_node(dev); - /* this is the node, see if it has interrupts */ - if (node && node->n_intrs > 0) - dev->irq = node->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - -void __init -pmac_pcibios_fixup(void) -{ - /* Fixup interrupts according to OF tree */ - pcibios_fixup_OF_interrupts(); -} - -int -pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) -{ - struct device_node* node; - int updatecfg = 0; - int uninorth_child; - - node = pci_device_to_OF_node(dev); - - /* We don't want to enable USB controllers absent from the OF tree - * (iBook second controller) - */ - if (dev->vendor == PCI_VENDOR_ID_APPLE - && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) - && !node) { - printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", - pci_name(dev)); - return -EINVAL; - } - - if (!node) - return 0; - - uninorth_child = node->parent && - device_is_compatible(node->parent, "uni-north"); - - /* Firewire & GMAC were disabled after PCI probe, the driver is - * claiming them, we must re-enable them now. - */ - if (uninorth_child && !strcmp(node->name, "firewire") && - (device_is_compatible(node, "pci106b,18") || - device_is_compatible(node, "pci106b,30") || - device_is_compatible(node, "pci11c1,5811"))) { - pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); - pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); - updatecfg = 1; - } - if (uninorth_child && !strcmp(node->name, "ethernet") && - device_is_compatible(node, "gmac")) { - pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); - updatecfg = 1; - } - - if (updatecfg) { - u16 cmd; - - /* - * Make sure PCI is correctly configured - * - * We use old pci_bios versions of the function since, by - * default, gmac is not powered up, and so will be absent - * from the kernel initial PCI lookup. - * - * Should be replaced by 2.4 new PCI mechanisms and really - * register the device. - */ - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; - pci_write_config_word(dev, PCI_COMMAND, cmd); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size); - } - - return 0; -} - -/* We power down some devices after they have been probed. They'll - * be powered back on later on - */ -void __init -pmac_pcibios_after_init(void) -{ - struct device_node* nd; - -#ifdef CONFIG_BLK_DEV_IDE - struct pci_dev *dev = NULL; - - /* OF fails to initialize IDE controllers on macs - * (and maybe other machines) - * - * Ideally, this should be moved to the IDE layer, but we need - * to check specifically with Andre Hedrick how to do it cleanly - * since the common IDE code seem to care about the fact that the - * BIOS may have disabled a controller. - * - * -- BenH - */ - for_each_pci_dev(dev) { - if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE) - pci_enable_device(dev); - } -#endif /* CONFIG_BLK_DEV_IDE */ - - nd = find_devices("firewire"); - while (nd) { - if (nd->parent && (device_is_compatible(nd, "pci106b,18") || - device_is_compatible(nd, "pci106b,30") || - device_is_compatible(nd, "pci11c1,5811")) - && device_is_compatible(nd->parent, "uni-north")) { - pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); - pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); - } - nd = nd->next; - } - nd = find_devices("ethernet"); - while (nd) { - if (nd->parent && device_is_compatible(nd, "gmac") - && device_is_compatible(nd->parent, "uni-north")) - pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); - nd = nd->next; - } -} - -void pmac_pci_fixup_cardbus(struct pci_dev* dev) -{ - if (_machine != _MACH_Pmac) - return; - /* - * Fix the interrupt routing on the various cardbus bridges - * used on powerbooks - */ - if (dev->vendor != PCI_VENDOR_ID_TI) - return; - if (dev->device == PCI_DEVICE_ID_TI_1130 || - dev->device == PCI_DEVICE_ID_TI_1131) { - u8 val; - /* Enable PCI interrupt */ - if (pci_read_config_byte(dev, 0x91, &val) == 0) - pci_write_config_byte(dev, 0x91, val | 0x30); - /* Disable ISA interrupt mode */ - if (pci_read_config_byte(dev, 0x92, &val) == 0) - pci_write_config_byte(dev, 0x92, val & ~0x06); - } - if (dev->device == PCI_DEVICE_ID_TI_1210 || - dev->device == PCI_DEVICE_ID_TI_1211 || - dev->device == PCI_DEVICE_ID_TI_1410 || - dev->device == PCI_DEVICE_ID_TI_1510) { - u8 val; - /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA - signal out the MFUNC0 pin */ - if (pci_read_config_byte(dev, 0x8c, &val) == 0) - pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); - /* Disable ISA interrupt mode */ - if (pci_read_config_byte(dev, 0x92, &val) == 0) - pci_write_config_byte(dev, 0x92, val & ~0x06); - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); - -void pmac_pci_fixup_pciata(struct pci_dev* dev) -{ - u8 progif = 0; - - /* - * On PowerMacs, we try to switch any PCI ATA controller to - * fully native mode - */ - if (_machine != _MACH_Pmac) - return; - /* Some controllers don't have the class IDE */ - if (dev->vendor == PCI_VENDOR_ID_PROMISE) - switch(dev->device) { - case PCI_DEVICE_ID_PROMISE_20246: - case PCI_DEVICE_ID_PROMISE_20262: - case PCI_DEVICE_ID_PROMISE_20263: - case PCI_DEVICE_ID_PROMISE_20265: - case PCI_DEVICE_ID_PROMISE_20267: - case PCI_DEVICE_ID_PROMISE_20268: - case PCI_DEVICE_ID_PROMISE_20269: - case PCI_DEVICE_ID_PROMISE_20270: - case PCI_DEVICE_ID_PROMISE_20271: - case PCI_DEVICE_ID_PROMISE_20275: - case PCI_DEVICE_ID_PROMISE_20276: - case PCI_DEVICE_ID_PROMISE_20277: - goto good; - } - /* Others, check PCI class */ - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - good: - pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); - if ((progif & 5) != 5) { - printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev)); - (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); - if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || - (progif & 5) != 5) - printk(KERN_ERR "Rewrite of PROGIF failed !\n"); - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); - - -/* - * Disable second function on K2-SATA, it's broken - * and disable IO BARs on first one - */ -void pmac_pci_fixup_k2_sata(struct pci_dev* dev) -{ - int i; - u16 cmd; - - if (PCI_FUNC(dev->devfn) > 0) { - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - for (i = 0; i < 6; i++) { - dev->resource[i].start = dev->resource[i].end = 0; - dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); - } - } else { - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~PCI_COMMAND_IO; - pci_write_config_word(dev, PCI_COMMAND, cmd); - for (i = 0; i < 5; i++) { - dev->resource[i].start = dev->resource[i].end = 0; - dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, pmac_pci_fixup_k2_sata); diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c deleted file mode 100644 index 4742bf6093..0000000000 --- a/arch/ppc/platforms/pmac_pic.c +++ /dev/null @@ -1,693 +0,0 @@ -/* - * Support for the interrupt controllers found on Power Macintosh, - * currently Apple's "Grand Central" interrupt controller in all - * it's incarnations. OpenPIC support used on newer machines is - * in a separate file - * - * Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au) - * - * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "pmac_pic.h" - -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); - -struct pmac_irq_hw { - unsigned int event; - unsigned int enable; - unsigned int ack; - unsigned int level; -}; - -/* Default addresses */ -static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { - (struct pmac_irq_hw *) 0xf3000020, - (struct pmac_irq_hw *) 0xf3000010, - (struct pmac_irq_hw *) 0xf4000020, - (struct pmac_irq_hw *) 0xf4000010, -}; - -#define GC_LEVEL_MASK 0x3ff00000 -#define OHARE_LEVEL_MASK 0x1ff00000 -#define HEATHROW_LEVEL_MASK 0x1ff00000 - -static int max_irqs; -static int max_real_irqs; -static u32 level_mask[4]; - -static DEFINE_SPINLOCK(pmac_pic_lock); - - -#define GATWICK_IRQ_POOL_SIZE 10 -static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; - -/* - * Mark an irq as "lost". This is only used on the pmac - * since it can lose interrupts (see pmac_set_irq_mask). - * -- Cort - */ -void -__set_lost(unsigned long irq_nr, int nokick) -{ - if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { - atomic_inc(&ppc_n_lost_interrupts); - if (!nokick) - set_dec(1); - } -} - -static void -pmac_mask_and_ack_irq(unsigned int irq_nr) -{ - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; - unsigned long flags; - - if ((unsigned)irq_nr >= max_irqs) - return; - - clear_bit(irq_nr, ppc_cached_irq_mask); - if (test_and_clear_bit(irq_nr, ppc_lost_interrupts)) - atomic_dec(&ppc_n_lost_interrupts); - spin_lock_irqsave(&pmac_pic_lock, flags); - out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); - out_le32(&pmac_irq_hw[i]->ack, bit); - do { - /* make sure ack gets to controller before we enable - interrupts */ - mb(); - } while((in_le32(&pmac_irq_hw[i]->enable) & bit) - != (ppc_cached_irq_mask[i] & bit)); - spin_unlock_irqrestore(&pmac_pic_lock, flags); -} - -static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) -{ - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; - unsigned long flags; - - if ((unsigned)irq_nr >= max_irqs) - return; - - spin_lock_irqsave(&pmac_pic_lock, flags); - /* enable unmasked interrupts */ - out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); - - do { - /* make sure mask gets to controller before we - return to user */ - mb(); - } while((in_le32(&pmac_irq_hw[i]->enable) & bit) - != (ppc_cached_irq_mask[i] & bit)); - - /* - * Unfortunately, setting the bit in the enable register - * when the device interrupt is already on *doesn't* set - * the bit in the flag register or request another interrupt. - */ - if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) - __set_lost((ulong)irq_nr, nokicklost); - spin_unlock_irqrestore(&pmac_pic_lock, flags); -} - -/* When an irq gets requested for the first client, if it's an - * edge interrupt, we clear any previous one on the controller - */ -static unsigned int pmac_startup_irq(unsigned int irq_nr) -{ - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; - - if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) - out_le32(&pmac_irq_hw[i]->ack, bit); - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); - - return 0; -} - -static void pmac_mask_irq(unsigned int irq_nr) -{ - clear_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); - mb(); -} - -static void pmac_unmask_irq(unsigned int irq_nr) -{ - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); -} - -static void pmac_end_irq(unsigned int irq_nr) -{ - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) - && irq_desc[irq_nr].action) { - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 1); - } -} - - -struct hw_interrupt_type pmac_pic = { - .typename = " PMAC-PIC ", - .startup = pmac_startup_irq, - .enable = pmac_unmask_irq, - .disable = pmac_mask_irq, - .ack = pmac_mask_and_ack_irq, - .end = pmac_end_irq, -}; - -struct hw_interrupt_type gatwick_pic = { - .typename = " GATWICK ", - .startup = pmac_startup_irq, - .enable = pmac_unmask_irq, - .disable = pmac_mask_irq, - .ack = pmac_mask_and_ack_irq, - .end = pmac_end_irq, -}; - -static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) -{ - int irq, bits; - - for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { - int i = irq >> 5; - bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); - bits &= ppc_cached_irq_mask[i]; - if (bits == 0) - continue; - irq += __ilog2(bits); - __do_IRQ(irq, regs); - return IRQ_HANDLED; - } - printk("gatwick irq not from gatwick pic\n"); - return IRQ_NONE; -} - -int -pmac_get_irq(struct pt_regs *regs) -{ - int irq; - unsigned long bits = 0; - -#ifdef CONFIG_SMP - void psurge_smp_message_recv(struct pt_regs *); - - /* IPI's are a hack on the powersurge -- Cort */ - if ( smp_processor_id() != 0 ) { - psurge_smp_message_recv(regs); - return -2; /* ignore, already handled */ - } -#endif /* CONFIG_SMP */ - for (irq = max_real_irqs; (irq -= 32) >= 0; ) { - int i = irq >> 5; - bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); - bits &= ppc_cached_irq_mask[i]; - if (bits == 0) - continue; - irq += __ilog2(bits); - break; - } - - return irq; -} - -/* This routine will fix some missing interrupt values in the device tree - * on the gatwick mac-io controller used by some PowerBooks - */ -static void __init -pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) -{ - struct device_node *node; - int count; - - memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); - node = gw->child; - count = 0; - while(node) - { - /* Fix SCC */ - if (strcasecmp(node->name, "escc") == 0) - if (node->child) { - if (node->child->n_intrs < 3) { - node->child->intrs = &gatwick_int_pool[count]; - count += 3; - } - node->child->n_intrs = 3; - node->child->intrs[0].line = 15+irq_base; - node->child->intrs[1].line = 4+irq_base; - node->child->intrs[2].line = 5+irq_base; - printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", - node->child->intrs[0].line, - node->child->intrs[1].line, - node->child->intrs[2].line); - } - /* Fix media-bay & left SWIM */ - if (strcasecmp(node->name, "media-bay") == 0) { - struct device_node* ya_node; - - if (node->n_intrs == 0) - node->intrs = &gatwick_int_pool[count++]; - node->n_intrs = 1; - node->intrs[0].line = 29+irq_base; - printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", - node->intrs[0].line); - - ya_node = node->child; - while(ya_node) - { - if (strcasecmp(ya_node->name, "floppy") == 0) { - if (ya_node->n_intrs < 2) { - ya_node->intrs = &gatwick_int_pool[count]; - count += 2; - } - ya_node->n_intrs = 2; - ya_node->intrs[0].line = 19+irq_base; - ya_node->intrs[1].line = 1+irq_base; - printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n", - ya_node->intrs[0].line, ya_node->intrs[1].line); - } - if (strcasecmp(ya_node->name, "ata4") == 0) { - if (ya_node->n_intrs < 2) { - ya_node->intrs = &gatwick_int_pool[count]; - count += 2; - } - ya_node->n_intrs = 2; - ya_node->intrs[0].line = 14+irq_base; - ya_node->intrs[1].line = 3+irq_base; - printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n", - ya_node->intrs[0].line, ya_node->intrs[1].line); - } - ya_node = ya_node->sibling; - } - } - node = node->sibling; - } - if (count > 10) { - printk("WARNING !! Gatwick interrupt pool overflow\n"); - printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE); - printk(" requested = %d\n", count); - } -} - -/* - * The PowerBook 3400/2400/3500 can have a combo ethernet/modem - * card which includes an ohare chip that acts as a second interrupt - * controller. If we find this second ohare, set it up and fix the - * interrupt value in the device tree for the ethernet chip. - */ -static int __init enable_second_ohare(void) -{ - unsigned char bus, devfn; - unsigned short cmd; - unsigned long addr; - struct device_node *irqctrler = find_devices("pci106b,7"); - struct device_node *ether; - - if (irqctrler == NULL || irqctrler->n_addrs <= 0) - return -1; - addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); - pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); - max_irqs = 64; - if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { - struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); - if (!hose) - printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); - else { - early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - cmd &= ~PCI_COMMAND_IO; - early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); - } - } - - /* Fix interrupt for the modem/ethernet combo controller. The number - in the device tree (27) is bogus (correct for the ethernet-only - board but not the combo ethernet/modem board). - The real interrupt is 28 on the second controller -> 28+32 = 60. - */ - ether = find_devices("pci1011,14"); - if (ether && ether->n_intrs > 0) { - ether->intrs[0].line = 60; - printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", - ether->intrs[0].line); - } - - /* Return the interrupt number of the cascade */ - return irqctrler->intrs[0].line; -} - -#ifdef CONFIG_POWER4 -static irqreturn_t k2u3_action(int cpl, void *dev_id, struct pt_regs *regs) -{ - int irq; - - irq = openpic2_get_irq(regs); - if (irq != -1) - __do_IRQ(irq, regs); - return IRQ_HANDLED; -} - -static struct irqaction k2u3_cascade_action = { - .handler = k2u3_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "U3->K2 Cascade", -}; -#endif /* CONFIG_POWER4 */ - -#ifdef CONFIG_XMON -static struct irqaction xmon_action = { - .handler = xmon_irq, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "NMI - XMON" -}; -#endif - -static struct irqaction gatwick_cascade_action = { - .handler = gatwick_action, - .flags = SA_INTERRUPT, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - -void __init pmac_pic_init(void) -{ - int i; - struct device_node *irqctrler = NULL; - struct device_node *irqctrler2 = NULL; - struct device_node *np; - unsigned long addr; - int irq_cascade = -1; - - /* We first try to detect Apple's new Core99 chipset, since mac-io - * is quite different on those machines and contains an IBM MPIC2. - */ - np = find_type_devices("open-pic"); - while(np) { - if (np->parent && !strcmp(np->parent->name, "u3")) - irqctrler2 = np; - else - irqctrler = np; - np = np->next; - } - if (irqctrler != NULL) - { - if (irqctrler->n_addrs > 0) - { - unsigned char senses[128]; - - printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", - irqctrler->addrs[0].address); - - prom_get_irq_senses(senses, 0, 128); - OpenPIC_InitSenses = senses; - OpenPIC_NumInitSenses = 128; - ppc_md.get_irq = openpic_get_irq; - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0); - OpenPIC_Addr = ioremap(irqctrler->addrs[0].address, - irqctrler->addrs[0].size); - openpic_init(0); - -#ifdef CONFIG_POWER4 - if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && - irqctrler2->n_addrs > 0) { - printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", - irqctrler2->addrs[0].address, - irqctrler2->intrs[0].line); - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); - OpenPIC2_Addr = ioremap(irqctrler2->addrs[0].address, - irqctrler2->addrs[0].size); - prom_get_irq_senses(senses, PMAC_OPENPIC2_OFFSET, - PMAC_OPENPIC2_OFFSET+128); - OpenPIC_InitSenses = senses; - OpenPIC_NumInitSenses = 128; - openpic2_init(PMAC_OPENPIC2_OFFSET); - - if (setup_irq(irqctrler2->intrs[0].line, - &k2u3_cascade_action)) - printk("Unable to get OpenPIC IRQ for cascade\n"); - } -#endif /* CONFIG_POWER4 */ - -#ifdef CONFIG_XMON - { - struct device_node* pswitch; - int nmi_irq; - - pswitch = find_devices("programmer-switch"); - if (pswitch && pswitch->n_intrs) { - nmi_irq = pswitch->intrs[0].line; - openpic_init_nmi_irq(nmi_irq); - setup_irq(nmi_irq, &xmon_action); - } - } -#endif /* CONFIG_XMON */ - return; - } - irqctrler = NULL; - } - - /* Get the level/edge settings, assume if it's not - * a Grand Central nor an OHare, then it's an Heathrow - * (or Paddington). - */ - if (find_devices("gc")) - level_mask[0] = GC_LEVEL_MASK; - else if (find_devices("ohare")) { - level_mask[0] = OHARE_LEVEL_MASK; - /* We might have a second cascaded ohare */ - level_mask[1] = OHARE_LEVEL_MASK; - } else { - level_mask[0] = HEATHROW_LEVEL_MASK; - level_mask[1] = 0; - /* We might have a second cascaded heathrow */ - level_mask[2] = HEATHROW_LEVEL_MASK; - level_mask[3] = 0; - } - - /* - * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, - * 1998 G3 Series PowerBooks have 128, - * other powermacs have 32. - * The combo ethernet/modem card for the Powerstar powerbooks - * (2400/3400/3500, ohare based) has a second ohare chip - * effectively making a total of 64. - */ - max_irqs = max_real_irqs = 32; - irqctrler = find_devices("mac-io"); - if (irqctrler) - { - max_real_irqs = 64; - if (irqctrler->next) - max_irqs = 128; - else - max_irqs = 64; - } - for ( i = 0; i < max_real_irqs ; i++ ) - irq_desc[i].handler = &pmac_pic; - - /* get addresses of first controller */ - if (irqctrler) { - if (irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 0; i < 2; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (2 - i) * 0x10); - } - - /* get addresses of second controller */ - irqctrler = irqctrler->next; - if (irqctrler && irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 2; i < 4; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (4 - i) * 0x10); - irq_cascade = irqctrler->intrs[0].line; - if (device_is_compatible(irqctrler, "gatwick")) - pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); - } - } else { - /* older powermacs have a GC (grand central) or ohare at - f3000000, with interrupt control registers at f3000020. */ - addr = (unsigned long) ioremap(0xf3000000, 0x40); - pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); - } - - /* PowerBooks 3400 and 3500 can have a second controller in a second - ohare chip, on the combo ethernet/modem card */ - if (machine_is_compatible("AAPL,3400/2400") - || machine_is_compatible("AAPL,3500")) - irq_cascade = enable_second_ohare(); - - /* disable all interrupts in all controllers */ - for (i = 0; i * 32 < max_irqs; ++i) - out_le32(&pmac_irq_hw[i]->enable, 0); - /* mark level interrupts */ - for (i = 0; i < max_irqs; i++) - if (level_mask[i >> 5] & (1UL << (i & 0x1f))) - irq_desc[i].status = IRQ_LEVEL; - - /* get interrupt line of secondary interrupt controller */ - if (irq_cascade >= 0) { - printk(KERN_INFO "irq: secondary controller on irq %d\n", - (int)irq_cascade); - for ( i = max_real_irqs ; i < max_irqs ; i++ ) - irq_desc[i].handler = &gatwick_pic; - setup_irq(irq_cascade, &gatwick_cascade_action); - } - printk("System has %d possible interrupts\n", max_irqs); - if (max_irqs != max_real_irqs) - printk(KERN_DEBUG "%d interrupts on main controller\n", - max_real_irqs); - -#ifdef CONFIG_XMON - setup_irq(20, &xmon_action); -#endif /* CONFIG_XMON */ -} - -#ifdef CONFIG_PM -/* - * These procedures are used in implementing sleep on the powerbooks. - * sleep_save_intrs() saves the states of all interrupt enables - * and disables all interrupts except for the nominated one. - * sleep_restore_intrs() restores the states of all interrupt enables. - */ -unsigned long sleep_save_mask[2]; - -/* This used to be passed by the PMU driver but that link got - * broken with the new driver model. We use this tweak for now... - */ -static int pmacpic_find_viaint(void) -{ - int viaint = -1; - -#ifdef CONFIG_ADB_PMU - struct device_node *np; - - if (pmu_get_model() != PMU_OHARE_BASED) - goto not_found; - np = of_find_node_by_name(NULL, "via-pmu"); - if (np == NULL) - goto not_found; - viaint = np->intrs[0].line; -#endif /* CONFIG_ADB_PMU */ - -not_found: - return viaint; -} - -static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) -{ - int viaint = pmacpic_find_viaint(); - - sleep_save_mask[0] = ppc_cached_irq_mask[0]; - sleep_save_mask[1] = ppc_cached_irq_mask[1]; - ppc_cached_irq_mask[0] = 0; - ppc_cached_irq_mask[1] = 0; - if (viaint > 0) - set_bit(viaint, ppc_cached_irq_mask); - out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); - if (max_real_irqs > 32) - out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); - (void)in_le32(&pmac_irq_hw[0]->event); - /* make sure mask gets to controller before we return to caller */ - mb(); - (void)in_le32(&pmac_irq_hw[0]->enable); - - return 0; -} - -static int pmacpic_resume(struct sys_device *sysdev) -{ - int i; - - out_le32(&pmac_irq_hw[0]->enable, 0); - if (max_real_irqs > 32) - out_le32(&pmac_irq_hw[1]->enable, 0); - mb(); - for (i = 0; i < max_real_irqs; ++i) - if (test_bit(i, sleep_save_mask)) - pmac_unmask_irq(i); - - return 0; -} - -#endif /* CONFIG_PM */ - -static struct sysdev_class pmacpic_sysclass = { - set_kset_name("pmac_pic"), -}; - -static struct sys_device device_pmacpic = { - .id = 0, - .cls = &pmacpic_sysclass, -}; - -static struct sysdev_driver driver_pmacpic = { -#ifdef CONFIG_PM - .suspend = &pmacpic_suspend, - .resume = &pmacpic_resume, -#endif /* CONFIG_PM */ -}; - -static int __init init_pmacpic_sysfs(void) -{ - if (max_irqs == 0) - return -ENODEV; - - printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); - sysdev_class_register(&pmacpic_sysclass); - sysdev_register(&device_pmacpic); - sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); - return 0; -} - -subsys_initcall(init_pmacpic_sysfs); - diff --git a/arch/ppc/platforms/pmac_pic.h b/arch/ppc/platforms/pmac_pic.h deleted file mode 100644 index 664103dfee..0000000000 --- a/arch/ppc/platforms/pmac_pic.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __PPC_PLATFORMS_PMAC_PIC_H -#define __PPC_PLATFORMS_PMAC_PIC_H - -#include - -extern struct hw_interrupt_type pmac_pic; - -void pmac_pic_init(void); -int pmac_get_irq(struct pt_regs *regs); - -#endif /* __PPC_PLATFORMS_PMAC_PIC_H */ diff --git a/arch/ppc/platforms/pmac_setup.c b/arch/ppc/platforms/pmac_setup.c deleted file mode 100644 index 55d2beffe5..0000000000 --- a/arch/ppc/platforms/pmac_setup.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * arch/ppc/platforms/setup.c - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * - * Derived from "arch/alpha/kernel/setup.c" - * Copyright (C) 1995 Linus Torvalds - * - * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* - * bootup setup stuff.. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "pmac_pic.h" -#include "mem_pieces.h" - -#undef SHOW_GATWICK_IRQS - -extern long pmac_time_init(void); -extern unsigned long pmac_get_rtc_time(void); -extern int pmac_set_rtc_time(unsigned long nowtime); -extern void pmac_read_rtc_time(void); -extern void pmac_calibrate_decr(void); -extern void pmac_pcibios_fixup(void); -extern void pmac_find_bridges(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); - -extern void pmac_nvram_update(void); -extern unsigned char pmac_nvram_read_byte(int addr); -extern void pmac_nvram_write_byte(int addr, unsigned char val); -extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); -extern void pmac_pcibios_after_init(void); -extern int of_show_percpuinfo(struct seq_file *m, int i); - -struct device_node *memory_node; - -unsigned char drive_info; - -int ppc_override_l2cr = 0; -int ppc_override_l2cr_value; -int has_l2cache = 0; - -static int current_root_goodness = -1; - -extern int pmac_newworld; - -#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ - -extern void zs_kgdb_hook(int tty_num); -static void ohare_init(void); -#ifdef CONFIG_BOOTX_TEXT -static void pmac_progress(char *s, unsigned short hex); -#endif - -sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; - -#ifdef CONFIG_SMP -extern struct smp_ops_t psurge_smp_ops; -extern struct smp_ops_t core99_smp_ops; -#endif /* CONFIG_SMP */ - -static int -pmac_show_cpuinfo(struct seq_file *m) -{ - struct device_node *np; - char *pp; - int plen; - int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, - NULL, PMAC_MB_INFO_MODEL, 0); - unsigned int mbflags = (unsigned int)pmac_call_feature(PMAC_FTR_GET_MB_INFO, - NULL, PMAC_MB_INFO_FLAGS, 0); - char* mbname; - - if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, (int)&mbname) != 0) - mbname = "Unknown"; - - /* find motherboard type */ - seq_printf(m, "machine\t\t: "); - np = find_devices("device-tree"); - if (np != NULL) { - pp = (char *) get_property(np, "model", NULL); - if (pp != NULL) - seq_printf(m, "%s\n", pp); - else - seq_printf(m, "PowerMac\n"); - pp = (char *) get_property(np, "compatible", &plen); - if (pp != NULL) { - seq_printf(m, "motherboard\t:"); - while (plen > 0) { - int l = strlen(pp) + 1; - seq_printf(m, " %s", pp); - plen -= l; - pp += l; - } - seq_printf(m, "\n"); - } - } else - seq_printf(m, "PowerMac\n"); - - /* print parsed model */ - seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname); - seq_printf(m, "pmac flags\t: %08x\n", mbflags); - - /* find l2 cache info */ - np = find_devices("l2-cache"); - if (np == 0) - np = find_type_devices("cache"); - if (np != 0) { - unsigned int *ic = (unsigned int *) - get_property(np, "i-cache-size", NULL); - unsigned int *dc = (unsigned int *) - get_property(np, "d-cache-size", NULL); - seq_printf(m, "L2 cache\t:"); - has_l2cache = 1; - if (get_property(np, "cache-unified", NULL) != 0 && dc) { - seq_printf(m, " %dK unified", *dc / 1024); - } else { - if (ic) - seq_printf(m, " %dK instruction", *ic / 1024); - if (dc) - seq_printf(m, "%s %dK data", - (ic? " +": ""), *dc / 1024); - } - pp = get_property(np, "ram-type", NULL); - if (pp) - seq_printf(m, " %s", pp); - seq_printf(m, "\n"); - } - - /* find ram info */ - np = find_devices("memory"); - if (np != 0) { - int n; - struct reg_property *reg = (struct reg_property *) - get_property(np, "reg", &n); - - if (reg != 0) { - unsigned long total = 0; - - for (n /= sizeof(struct reg_property); n > 0; --n) - total += (reg++)->size; - seq_printf(m, "memory\t\t: %luMB\n", total >> 20); - } - } - - /* Checks "l2cr-value" property in the registry */ - np = find_devices("cpus"); - if (np == 0) - np = find_type_devices("cpu"); - if (np != 0) { - unsigned int *l2cr = (unsigned int *) - get_property(np, "l2cr-value", NULL); - if (l2cr != 0) { - seq_printf(m, "l2cr override\t: 0x%x\n", *l2cr); - } - } - - /* Indicate newworld/oldworld */ - seq_printf(m, "pmac-generation\t: %s\n", - pmac_newworld ? "NewWorld" : "OldWorld"); - - - return 0; -} - -static int -pmac_show_percpuinfo(struct seq_file *m, int i) -{ -#ifdef CONFIG_CPU_FREQ_PMAC - extern unsigned int pmac_get_one_cpufreq(int i); - unsigned int freq = pmac_get_one_cpufreq(i); - if (freq != 0) { - seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); - return 0; - } -#endif /* CONFIG_CPU_FREQ_PMAC */ - return of_show_percpuinfo(m, i); -} - -static volatile u32 *sysctrl_regs; - -void __init -pmac_setup_arch(void) -{ - struct device_node *cpu; - int *fp; - unsigned long pvr; - - pvr = PVR_VER(mfspr(SPRN_PVR)); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - cpu = find_type_devices("cpu"); - if (cpu != 0) { - fp = (int *) get_property(cpu, "clock-frequency", NULL); - if (fp != 0) { - if (pvr == 4 || pvr >= 8) - /* 604, G3, G4 etc. */ - loops_per_jiffy = *fp / HZ; - else - /* 601, 603, etc. */ - loops_per_jiffy = *fp / (2*HZ); - } else - loops_per_jiffy = 50000000 / HZ; - } - - /* this area has the CPU identification register - and some registers used by smp boards */ - sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000); - ohare_init(); - - /* Lookup PCI hosts */ - pmac_find_bridges(); - - /* Checks "l2cr-value" property in the registry */ - if (cpu_has_feature(CPU_FTR_L2CR)) { - struct device_node *np = find_devices("cpus"); - if (np == 0) - np = find_type_devices("cpu"); - if (np != 0) { - unsigned int *l2cr = (unsigned int *) - get_property(np, "l2cr-value", NULL); - if (l2cr != 0) { - ppc_override_l2cr = 1; - ppc_override_l2cr_value = *l2cr; - _set_L2CR(0); - _set_L2CR(ppc_override_l2cr_value); - } - } - } - - if (ppc_override_l2cr) - printk(KERN_INFO "L2CR overriden (0x%x), backside cache is %s\n", - ppc_override_l2cr_value, (ppc_override_l2cr_value & 0x80000000) - ? "enabled" : "disabled"); - -#ifdef CONFIG_KGDB - zs_kgdb_hook(0); -#endif - -#ifdef CONFIG_ADB_CUDA - find_via_cuda(); -#else - if (find_devices("via-cuda")) { - printk("WARNING ! Your machine is Cuda based but your kernel\n"); - printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n"); - } -#endif -#ifdef CONFIG_ADB_PMU - find_via_pmu(); -#else - if (find_devices("via-pmu")) { - printk("WARNING ! Your machine is PMU based but your kernel\n"); - printk(" wasn't compiled with CONFIG_ADB_PMU option !\n"); - } -#endif -#ifdef CONFIG_NVRAM - pmac_nvram_init(); -#endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = DEFAULT_ROOT_DEVICE; - -#ifdef CONFIG_SMP - /* Check for Core99 */ - if (find_devices("uni-n") || find_devices("u3")) - smp_ops = &core99_smp_ops; - else - smp_ops = &psurge_smp_ops; -#endif /* CONFIG_SMP */ - - pci_create_OF_bus_map(); -} - -static void __init ohare_init(void) -{ - /* - * Turn on the L2 cache. - * We assume that we have a PSX memory controller iff - * we have an ohare I/O controller. - */ - if (find_devices("ohare") != NULL) { - if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) { - if (sysctrl_regs[4] & 0x10) - sysctrl_regs[4] |= 0x04000020; - else - sysctrl_regs[4] |= 0x04000000; - if(has_l2cache) - printk(KERN_INFO "Level 2 cache enabled\n"); - } - } -} - -extern char *bootpath; -extern char *bootdevice; -void *boot_host; -int boot_target; -int boot_part; -extern dev_t boot_dev; - -#ifdef CONFIG_SCSI -void __init -note_scsi_host(struct device_node *node, void *host) -{ - int l; - char *p; - - l = strlen(node->full_name); - if (bootpath != NULL && bootdevice != NULL - && strncmp(node->full_name, bootdevice, l) == 0 - && (bootdevice[l] == '/' || bootdevice[l] == 0)) { - boot_host = host; - /* - * There's a bug in OF 1.0.5. (Why am I not surprised.) - * If you pass a path like scsi/sd@1:0 to canon, it returns - * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0 - * That is, the scsi target number doesn't get preserved. - * So we pick the target number out of bootpath and use that. - */ - p = strstr(bootpath, "/sd@"); - if (p != NULL) { - p += 4; - boot_target = simple_strtoul(p, NULL, 10); - p = strchr(p, ':'); - if (p != NULL) - boot_part = simple_strtoul(p + 1, NULL, 10); - } - } -} -#endif - -#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) -static dev_t __init -find_ide_boot(void) -{ - char *p; - int n; - dev_t __init pmac_find_ide_boot(char *bootdevice, int n); - - if (bootdevice == NULL) - return 0; - p = strrchr(bootdevice, '/'); - if (p == NULL) - return 0; - n = p - bootdevice; - - return pmac_find_ide_boot(bootdevice, n); -} -#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */ - -static void __init -find_boot_device(void) -{ -#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) - boot_dev = find_ide_boot(); -#endif -} - -static int initializing = 1; -/* TODO: Merge the suspend-to-ram with the common code !!! - * currently, this is a stub implementation for suspend-to-disk - * only - */ - -#ifdef CONFIG_SOFTWARE_SUSPEND - -static int pmac_pm_prepare(suspend_state_t state) -{ - printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); - - return 0; -} - -static int pmac_pm_enter(suspend_state_t state) -{ - printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); - - /* Giveup the lazy FPU & vec so we don't have to back them - * up from the low level code - */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - return 0; -} - -static int pmac_pm_finish(suspend_state_t state) -{ - printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); - - /* Restore userland MMU context */ - set_context(current->active_mm->context, current->active_mm->pgd); - - return 0; -} - -static struct pm_ops pmac_pm_ops = { - .pm_disk_mode = PM_DISK_SHUTDOWN, - .prepare = pmac_pm_prepare, - .enter = pmac_pm_enter, - .finish = pmac_pm_finish, -}; - -#endif /* CONFIG_SOFTWARE_SUSPEND */ - -static int pmac_late_init(void) -{ - initializing = 0; -#ifdef CONFIG_SOFTWARE_SUSPEND - pm_set_ops(&pmac_pm_ops); -#endif /* CONFIG_SOFTWARE_SUSPEND */ - return 0; -} - -late_initcall(pmac_late_init); - -/* can't be __init - can be called whenever a disk is first accessed */ -void -note_bootable_part(dev_t dev, int part, int goodness) -{ - static int found_boot = 0; - char *p; - - if (!initializing) - return; - if ((goodness <= current_root_goodness) && - ROOT_DEV != DEFAULT_ROOT_DEVICE) - return; - p = strstr(saved_command_line, "root="); - if (p != NULL && (p == saved_command_line || p[-1] == ' ')) - return; - - if (!found_boot) { - find_boot_device(); - found_boot = 1; - } - if (!boot_dev || dev == boot_dev) { - ROOT_DEV = dev + part; - boot_dev = 0; - current_root_goodness = goodness; - } -} - -static void -pmac_restart(char *cmd) -{ -#ifdef CONFIG_ADB_CUDA - struct adb_request req; -#endif /* CONFIG_ADB_CUDA */ - - switch (sys_ctrler) { -#ifdef CONFIG_ADB_CUDA - case SYS_CTRLER_CUDA: - cuda_request(&req, NULL, 2, CUDA_PACKET, - CUDA_RESET_SYSTEM); - for (;;) - cuda_poll(); - break; -#endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - pmu_restart(); - break; -#endif /* CONFIG_ADB_PMU */ - default: ; - } -} - -static void -pmac_power_off(void) -{ -#ifdef CONFIG_ADB_CUDA - struct adb_request req; -#endif /* CONFIG_ADB_CUDA */ - - switch (sys_ctrler) { -#ifdef CONFIG_ADB_CUDA - case SYS_CTRLER_CUDA: - cuda_request(&req, NULL, 2, CUDA_PACKET, - CUDA_POWERDOWN); - for (;;) - cuda_poll(); - break; -#endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - pmu_shutdown(); - break; -#endif /* CONFIG_ADB_PMU */ - default: ; - } -} - -static void -pmac_halt(void) -{ - pmac_power_off(); -} - -/* - * Read in a property describing some pieces of memory. - */ - -static int __init -get_mem_prop(char *name, struct mem_pieces *mp) -{ - struct reg_property *rp; - int i, s; - unsigned int *ip; - int nac = prom_n_addr_cells(memory_node); - int nsc = prom_n_size_cells(memory_node); - - ip = (unsigned int *) get_property(memory_node, name, &s); - if (ip == NULL) { - printk(KERN_ERR "error: couldn't get %s property on /memory\n", - name); - return 0; - } - s /= (nsc + nac) * 4; - rp = mp->regions; - for (i = 0; i < s; ++i, ip += nac+nsc) { - if (nac >= 2 && ip[nac-2] != 0) - continue; - rp->address = ip[nac-1]; - if (nsc >= 2 && ip[nac+nsc-2] != 0) - rp->size = ~0U; - else - rp->size = ip[nac+nsc-1]; - ++rp; - } - mp->n_regions = rp - mp->regions; - - /* Make sure the pieces are sorted. */ - mem_pieces_sort(mp); - mem_pieces_coalesce(mp); - return 1; -} - -/* - * On systems with Open Firmware, collect information about - * physical RAM and which pieces are already in use. - * At this point, we have (at least) the first 8MB mapped with a BAT. - * Our text, data, bss use something over 1MB, starting at 0. - * Open Firmware may be using 1MB at the 4MB point. - */ -unsigned long __init -pmac_find_end_of_memory(void) -{ - unsigned long a, total; - struct mem_pieces phys_mem; - - /* - * Find out where physical memory is, and check that it - * starts at 0 and is contiguous. It seems that RAM is - * always physically contiguous on Power Macintoshes. - * - * Supporting discontiguous physical memory isn't hard, - * it just makes the virtual <-> physical mapping functions - * more complicated (or else you end up wasting space - * in mem_map). - */ - memory_node = find_devices("memory"); - if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) - || phys_mem.n_regions == 0) - panic("No RAM??"); - a = phys_mem.regions[0].address; - if (a != 0) - panic("RAM doesn't start at physical address 0"); - total = phys_mem.regions[0].size; - - if (phys_mem.n_regions > 1) { - printk("RAM starting at 0x%x is not contiguous\n", - phys_mem.regions[1].address); - printk("Using RAM from 0 to 0x%lx\n", total-1); - } - - return total; -} - -void __init -pmac_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* isa_io_base gets set in pmac_find_bridges */ - isa_mem_base = PMAC_ISA_MEM_BASE; - pci_dram_offset = PMAC_PCI_DRAM_OFFSET; - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 1; - DMA_MODE_WRITE = 2; - - ppc_md.setup_arch = pmac_setup_arch; - ppc_md.show_cpuinfo = pmac_show_cpuinfo; - ppc_md.show_percpuinfo = pmac_show_percpuinfo; - ppc_md.init_IRQ = pmac_pic_init; - ppc_md.get_irq = pmac_get_irq; /* Changed later on ... */ - - ppc_md.pcibios_fixup = pmac_pcibios_fixup; - ppc_md.pcibios_enable_device_hook = pmac_pci_enable_device_hook; - ppc_md.pcibios_after_init = pmac_pcibios_after_init; - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = pmac_restart; - ppc_md.power_off = pmac_power_off; - ppc_md.halt = pmac_halt; - - ppc_md.time_init = pmac_time_init; - ppc_md.set_rtc_time = pmac_set_rtc_time; - ppc_md.get_rtc_time = pmac_get_rtc_time; - ppc_md.calibrate_decr = pmac_calibrate_decr; - - ppc_md.find_end_of_memory = pmac_find_end_of_memory; - - ppc_md.feature_call = pmac_do_feature_call; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - -#ifdef CONFIG_BOOTX_TEXT - ppc_md.progress = pmac_progress; -#endif /* CONFIG_BOOTX_TEXT */ - - if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0); - -} - -#ifdef CONFIG_BOOTX_TEXT -static void __init -pmac_progress(char *s, unsigned short hex) -{ - if (boot_text_mapped) { - btext_drawstring(s); - btext_drawchar('\n'); - } -} -#endif /* CONFIG_BOOTX_TEXT */ - -static int __init -pmac_declare_of_platform_devices(void) -{ - struct device_node *np; - - np = find_devices("uni-n"); - if (np) { - for (np = np->child; np != NULL; np = np->sibling) - if (strncmp(np->name, "i2c", 3) == 0) { - of_platform_device_create(np, "uni-n-i2c", - NULL); - break; - } - } - np = find_devices("u3"); - if (np) { - for (np = np->child; np != NULL; np = np->sibling) - if (strncmp(np->name, "i2c", 3) == 0) { - of_platform_device_create(np, "u3-i2c", - NULL); - break; - } - } - - np = find_devices("valkyrie"); - if (np) - of_platform_device_create(np, "valkyrie", NULL); - np = find_devices("platinum"); - if (np) - of_platform_device_create(np, "platinum", NULL); - - return 0; -} - -device_initcall(pmac_declare_of_platform_devices); diff --git a/arch/ppc/platforms/pmac_sleep.S b/arch/ppc/platforms/pmac_sleep.S deleted file mode 100644 index 22b113d19b..0000000000 --- a/arch/ppc/platforms/pmac_sleep.S +++ /dev/null @@ -1,396 +0,0 @@ -/* - * This file contains sleep low-level functions for PowerBook G3. - * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * and Paul Mackerras (paulus@samba.org). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAGIC 0x4c617273 /* 'Lars' */ - -/* - * Structure for storing CPU registers on the stack. - */ -#define SL_SP 0 -#define SL_PC 4 -#define SL_MSR 8 -#define SL_SDR1 0xc -#define SL_SPRG0 0x10 /* 4 sprg's */ -#define SL_DBAT0 0x20 -#define SL_IBAT0 0x28 -#define SL_DBAT1 0x30 -#define SL_IBAT1 0x38 -#define SL_DBAT2 0x40 -#define SL_IBAT2 0x48 -#define SL_DBAT3 0x50 -#define SL_IBAT3 0x58 -#define SL_TB 0x60 -#define SL_R2 0x68 -#define SL_CR 0x6c -#define SL_R12 0x70 /* r12 to r31 */ -#define SL_SIZE (SL_R12 + 80) - - .section .text - .align 5 - -#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) - -/* This gets called by via-pmu.c late during the sleep process. - * The PMU was already send the sleep command and will shut us down - * soon. We need to save all that is needed and setup the wakeup - * vector that will be called by the ROM on wakeup - */ -_GLOBAL(low_sleep_handler) -#ifndef CONFIG_6xx - blr -#else - mflr r0 - stw r0,4(r1) - stwu r1,-SL_SIZE(r1) - mfcr r0 - stw r0,SL_CR(r1) - stw r2,SL_R2(r1) - stmw r12,SL_R12(r1) - - /* Save MSR & SDR1 */ - mfmsr r4 - stw r4,SL_MSR(r1) - mfsdr1 r4 - stw r4,SL_SDR1(r1) - - /* Get a stable timebase and save it */ -1: mftbu r4 - stw r4,SL_TB(r1) - mftb r5 - stw r5,SL_TB+4(r1) - mftbu r3 - cmpw r3,r4 - bne 1b - - /* Save SPRGs */ - mfsprg r4,0 - stw r4,SL_SPRG0(r1) - mfsprg r4,1 - stw r4,SL_SPRG0+4(r1) - mfsprg r4,2 - stw r4,SL_SPRG0+8(r1) - mfsprg r4,3 - stw r4,SL_SPRG0+12(r1) - - /* Save BATs */ - mfdbatu r4,0 - stw r4,SL_DBAT0(r1) - mfdbatl r4,0 - stw r4,SL_DBAT0+4(r1) - mfdbatu r4,1 - stw r4,SL_DBAT1(r1) - mfdbatl r4,1 - stw r4,SL_DBAT1+4(r1) - mfdbatu r4,2 - stw r4,SL_DBAT2(r1) - mfdbatl r4,2 - stw r4,SL_DBAT2+4(r1) - mfdbatu r4,3 - stw r4,SL_DBAT3(r1) - mfdbatl r4,3 - stw r4,SL_DBAT3+4(r1) - mfibatu r4,0 - stw r4,SL_IBAT0(r1) - mfibatl r4,0 - stw r4,SL_IBAT0+4(r1) - mfibatu r4,1 - stw r4,SL_IBAT1(r1) - mfibatl r4,1 - stw r4,SL_IBAT1+4(r1) - mfibatu r4,2 - stw r4,SL_IBAT2(r1) - mfibatl r4,2 - stw r4,SL_IBAT2+4(r1) - mfibatu r4,3 - stw r4,SL_IBAT3(r1) - mfibatl r4,3 - stw r4,SL_IBAT3+4(r1) - - /* Backup various CPU config stuffs */ - bl __save_cpu_setup - - /* The ROM can wake us up via 2 different vectors: - * - On wallstreet & lombard, we must write a magic - * value 'Lars' at address 4 and a pointer to a - * memory location containing the PC to resume from - * at address 0. - * - On Core99, we must store the wakeup vector at - * address 0x80 and eventually it's parameters - * at address 0x84. I've have some trouble with those - * parameters however and I no longer use them. - */ - lis r5,grackle_wake_up@ha - addi r5,r5,grackle_wake_up@l - tophys(r5,r5) - stw r5,SL_PC(r1) - lis r4,KERNELBASE@h - tophys(r5,r1) - addi r5,r5,SL_PC - lis r6,MAGIC@ha - addi r6,r6,MAGIC@l - stw r5,0(r4) - stw r6,4(r4) - /* Setup stuffs at 0x80-0x84 for Core99 */ - lis r3,core99_wake_up@ha - addi r3,r3,core99_wake_up@l - tophys(r3,r3) - stw r3,0x80(r4) - stw r5,0x84(r4) - /* Store a pointer to our backup storage into - * a kernel global - */ - lis r3,sleep_storage@ha - addi r3,r3,sleep_storage@l - stw r5,0(r3) - - .globl low_cpu_die -low_cpu_die: - /* Flush & disable all caches */ - bl flush_disable_caches - - /* Turn off data relocation. */ - mfmsr r3 /* Save MSR in r7 */ - rlwinm r3,r3,0,28,26 /* Turn off DR bit */ - sync - mtmsr r3 - isync - -BEGIN_FTR_SECTION - /* Flush any pending L2 data prefetches to work around HW bug */ - sync - lis r3,0xfff0 - lwz r0,0(r3) /* perform cache-inhibited load to ROM */ - sync /* (caches are disabled at this point) */ -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - -/* - * Set the HID0 and MSR for sleep. - */ - mfspr r2,SPRN_HID0 - rlwinm r2,r2,0,10,7 /* clear doze, nap */ - oris r2,r2,HID0_SLEEP@h - sync - isync - mtspr SPRN_HID0,r2 - sync - -/* This loop puts us back to sleep in case we have a spurrious - * wakeup so that the host bridge properly stays asleep. The - * CPU will be turned off, either after a known time (about 1 - * second) on wallstreet & lombard, or as soon as the CPU enters - * SLEEP mode on core99 - */ - mfmsr r2 - oris r2,r2,MSR_POW@h -1: sync - mtmsr r2 - isync - b 1b - -/* - * Here is the resume code. - */ - - -/* - * Core99 machines resume here - * r4 has the physical address of SL_PC(sp) (unused) - */ -_GLOBAL(core99_wake_up) - /* Make sure HID0 no longer contains any sleep bit and that data cache - * is disabled - */ - mfspr r3,SPRN_HID0 - rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */ - rlwinm 3,r3,0,18,15 /* clear DCE, ICE */ - mtspr SPRN_HID0,r3 - sync - isync - - /* sanitize MSR */ - mfmsr r3 - ori r3,r3,MSR_EE|MSR_IP - xori r3,r3,MSR_EE|MSR_IP - sync - isync - mtmsr r3 - sync - isync - - /* Recover sleep storage */ - lis r3,sleep_storage@ha - addi r3,r3,sleep_storage@l - tophys(r3,r3) - lwz r1,0(r3) - - /* Pass thru to older resume code ... */ -/* - * Here is the resume code for older machines. - * r1 has the physical address of SL_PC(sp). - */ - -grackle_wake_up: - - /* Restore the kernel's segment registers before - * we do any r1 memory access as we are not sure they - * are in a sane state above the first 256Mb region - */ - li r0,16 /* load up segment register values */ - mtctr r0 /* for context 0 */ - lis r3,0x2000 /* Ku = 1, VSID = 0 */ - li r4,0 -3: mtsrin r3,r4 - addi r3,r3,0x111 /* increment VSID */ - addis r4,r4,0x1000 /* address of next segment */ - bdnz 3b - sync - isync - - subi r1,r1,SL_PC - - /* Restore various CPU config stuffs */ - bl __restore_cpu_setup - - /* Make sure all FPRs have been initialized */ - bl reloc_offset - bl __init_fpu_registers - - /* Invalidate & enable L1 cache, we don't care about - * whatever the ROM may have tried to write to memory - */ - bl __inval_enable_L1 - - /* Restore the BATs, and SDR1. Then we can turn on the MMU. */ - lwz r4,SL_SDR1(r1) - mtsdr1 r4 - lwz r4,SL_SPRG0(r1) - mtsprg 0,r4 - lwz r4,SL_SPRG0+4(r1) - mtsprg 1,r4 - lwz r4,SL_SPRG0+8(r1) - mtsprg 2,r4 - lwz r4,SL_SPRG0+12(r1) - mtsprg 3,r4 - - lwz r4,SL_DBAT0(r1) - mtdbatu 0,r4 - lwz r4,SL_DBAT0+4(r1) - mtdbatl 0,r4 - lwz r4,SL_DBAT1(r1) - mtdbatu 1,r4 - lwz r4,SL_DBAT1+4(r1) - mtdbatl 1,r4 - lwz r4,SL_DBAT2(r1) - mtdbatu 2,r4 - lwz r4,SL_DBAT2+4(r1) - mtdbatl 2,r4 - lwz r4,SL_DBAT3(r1) - mtdbatu 3,r4 - lwz r4,SL_DBAT3+4(r1) - mtdbatl 3,r4 - lwz r4,SL_IBAT0(r1) - mtibatu 0,r4 - lwz r4,SL_IBAT0+4(r1) - mtibatl 0,r4 - lwz r4,SL_IBAT1(r1) - mtibatu 1,r4 - lwz r4,SL_IBAT1+4(r1) - mtibatl 1,r4 - lwz r4,SL_IBAT2(r1) - mtibatu 2,r4 - lwz r4,SL_IBAT2+4(r1) - mtibatl 2,r4 - lwz r4,SL_IBAT3(r1) - mtibatu 3,r4 - lwz r4,SL_IBAT3+4(r1) - mtibatl 3,r4 - -BEGIN_FTR_SECTION - li r4,0 - mtspr SPRN_DBAT4U,r4 - mtspr SPRN_DBAT4L,r4 - mtspr SPRN_DBAT5U,r4 - mtspr SPRN_DBAT5L,r4 - mtspr SPRN_DBAT6U,r4 - mtspr SPRN_DBAT6L,r4 - mtspr SPRN_DBAT7U,r4 - mtspr SPRN_DBAT7L,r4 - mtspr SPRN_IBAT4U,r4 - mtspr SPRN_IBAT4L,r4 - mtspr SPRN_IBAT5U,r4 - mtspr SPRN_IBAT5L,r4 - mtspr SPRN_IBAT6U,r4 - mtspr SPRN_IBAT6L,r4 - mtspr SPRN_IBAT7U,r4 - mtspr SPRN_IBAT7L,r4 -END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) - - /* Flush all TLBs */ - lis r4,0x1000 -1: addic. r4,r4,-0x1000 - tlbie r4 - blt 1b - sync - - /* restore the MSR and turn on the MMU */ - lwz r3,SL_MSR(r1) - bl turn_on_mmu - - /* get back the stack pointer */ - tovirt(r1,r1) - - /* Restore TB */ - li r3,0 - mttbl r3 - lwz r3,SL_TB(r1) - lwz r4,SL_TB+4(r1) - mttbu r3 - mttbl r4 - - /* Restore the callee-saved registers and return */ - lwz r0,SL_CR(r1) - mtcr r0 - lwz r2,SL_R2(r1) - lmw r12,SL_R12(r1) - addi r1,r1,SL_SIZE - lwz r0,4(r1) - mtlr r0 - blr - -turn_on_mmu: - mflr r4 - tovirt(r4,r4) - mtsrr0 r4 - mtsrr1 r3 - sync - isync - rfi - -#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */ - - .section .data - .balign L1_CACHE_BYTES -sleep_storage: - .long 0 - .balign L1_CACHE_BYTES, 0 - -#endif /* CONFIG_6xx */ - .section .text diff --git a/arch/ppc/platforms/pmac_smp.c b/arch/ppc/platforms/pmac_smp.c deleted file mode 100644 index 26ff26238f..0000000000 --- a/arch/ppc/platforms/pmac_smp.c +++ /dev/null @@ -1,692 +0,0 @@ -/* - * SMP support for power macintosh. - * - * We support both the old "powersurge" SMP architecture - * and the current Core99 (G4 PowerMac) machines. - * - * Note that we don't support the very first rev. of - * Apple/DayStar 2 CPUs board, the one with the funky - * watchdog. Hopefully, none of these should be there except - * maybe internally to Apple. I should probably still add some - * code to detect this card though and disable SMP. --BenH. - * - * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net) - * and Ben Herrenschmidt . - * - * Support for DayStar quad CPU cards - * Copyright (C) XLR8, Inc. 1994-2000 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Powersurge (old powermac SMP) support. - */ - -extern void __secondary_start_pmac_0(void); - -/* Addresses for powersurge registers */ -#define HAMMERHEAD_BASE 0xf8000000 -#define HHEAD_CONFIG 0x90 -#define HHEAD_SEC_INTR 0xc0 - -/* register for interrupting the primary processor on the powersurge */ -/* N.B. this is actually the ethernet ROM! */ -#define PSURGE_PRI_INTR 0xf3019000 - -/* register for storing the start address for the secondary processor */ -/* N.B. this is the PCI config space address register for the 1st bridge */ -#define PSURGE_START 0xf2800000 - -/* Daystar/XLR8 4-CPU card */ -#define PSURGE_QUAD_REG_ADDR 0xf8800000 - -#define PSURGE_QUAD_IRQ_SET 0 -#define PSURGE_QUAD_IRQ_CLR 1 -#define PSURGE_QUAD_IRQ_PRIMARY 2 -#define PSURGE_QUAD_CKSTOP_CTL 3 -#define PSURGE_QUAD_PRIMARY_ARB 4 -#define PSURGE_QUAD_BOARD_ID 6 -#define PSURGE_QUAD_WHICH_CPU 7 -#define PSURGE_QUAD_CKSTOP_RDBK 8 -#define PSURGE_QUAD_RESET_CTL 11 - -#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v))) -#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f) -#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v))) -#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v))) - -/* virtual addresses for the above */ -static volatile u8 __iomem *hhead_base; -static volatile u8 __iomem *quad_base; -static volatile u32 __iomem *psurge_pri_intr; -static volatile u8 __iomem *psurge_sec_intr; -static volatile u32 __iomem *psurge_start; - -/* values for psurge_type */ -#define PSURGE_NONE -1 -#define PSURGE_DUAL 0 -#define PSURGE_QUAD_OKEE 1 -#define PSURGE_QUAD_COTTON 2 -#define PSURGE_QUAD_ICEGRASS 3 - -/* what sort of powersurge board we have */ -static int psurge_type = PSURGE_NONE; - -/* L2 and L3 cache settings to pass from CPU0 to CPU1 */ -volatile static long int core99_l2_cache; -volatile static long int core99_l3_cache; - -/* Timebase freeze GPIO */ -static unsigned int core99_tb_gpio; - -/* Sync flag for HW tb sync */ -static volatile int sec_tb_reset = 0; -static unsigned int pri_tb_hi, pri_tb_lo; -static unsigned int pri_tb_stamp; - -static void __devinit core99_init_caches(int cpu) -{ - if (!cpu_has_feature(CPU_FTR_L2CR)) - return; - - if (cpu == 0) { - core99_l2_cache = _get_L2CR(); - printk("CPU0: L2CR is %lx\n", core99_l2_cache); - } else { - printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR()); - _set_L2CR(0); - _set_L2CR(core99_l2_cache); - printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache); - } - - if (!cpu_has_feature(CPU_FTR_L3CR)) - return; - - if (cpu == 0){ - core99_l3_cache = _get_L3CR(); - printk("CPU0: L3CR is %lx\n", core99_l3_cache); - } else { - printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR()); - _set_L3CR(0); - _set_L3CR(core99_l3_cache); - printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); - } -} - -/* - * Set and clear IPIs for powersurge. - */ -static inline void psurge_set_ipi(int cpu) -{ - if (psurge_type == PSURGE_NONE) - return; - if (cpu == 0) - in_be32(psurge_pri_intr); - else if (psurge_type == PSURGE_DUAL) - out_8(psurge_sec_intr, 0); - else - PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu); -} - -static inline void psurge_clr_ipi(int cpu) -{ - if (cpu > 0) { - switch(psurge_type) { - case PSURGE_DUAL: - out_8(psurge_sec_intr, ~0); - case PSURGE_NONE: - break; - default: - PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu); - } - } -} - -/* - * On powersurge (old SMP powermac architecture) we don't have - * separate IPIs for separate messages like openpic does. Instead - * we have a bitmap for each processor, where a 1 bit means that - * the corresponding message is pending for that processor. - * Ideally each cpu's entry would be in a different cache line. - * -- paulus. - */ -static unsigned long psurge_smp_message[NR_CPUS]; - -void psurge_smp_message_recv(struct pt_regs *regs) -{ - int cpu = smp_processor_id(); - int msg; - - /* clear interrupt */ - psurge_clr_ipi(cpu); - - if (num_online_cpus() < 2) - return; - - /* make sure there is a message there */ - for (msg = 0; msg < 4; msg++) - if (test_and_clear_bit(msg, &psurge_smp_message[cpu])) - smp_message_recv(msg, regs); -} - -irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs) -{ - psurge_smp_message_recv(regs); - return IRQ_HANDLED; -} - -static void smp_psurge_message_pass(int target, int msg) -{ - int i; - - if (num_online_cpus() < 2) - return; - - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_online(i)) - continue; - if (target == MSG_ALL - || (target == MSG_ALL_BUT_SELF && i != smp_processor_id()) - || target == i) { - set_bit(msg, &psurge_smp_message[i]); - psurge_set_ipi(i); - } - } -} - -/* - * Determine a quad card presence. We read the board ID register, we - * force the data bus to change to something else, and we read it again. - * It it's stable, then the register probably exist (ugh !) - */ -static int __init psurge_quad_probe(void) -{ - int type; - unsigned int i; - - type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID); - if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS - || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) - return PSURGE_DUAL; - - /* looks OK, try a slightly more rigorous test */ - /* bogus is not necessarily cacheline-aligned, - though I don't suppose that really matters. -- paulus */ - for (i = 0; i < 100; i++) { - volatile u32 bogus[8]; - bogus[(0+i)%8] = 0x00000000; - bogus[(1+i)%8] = 0x55555555; - bogus[(2+i)%8] = 0xFFFFFFFF; - bogus[(3+i)%8] = 0xAAAAAAAA; - bogus[(4+i)%8] = 0x33333333; - bogus[(5+i)%8] = 0xCCCCCCCC; - bogus[(6+i)%8] = 0xCCCCCCCC; - bogus[(7+i)%8] = 0x33333333; - wmb(); - asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory"); - mb(); - if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) - return PSURGE_DUAL; - } - return type; -} - -static void __init psurge_quad_init(void) -{ - int procbits; - - if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351); - procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU); - if (psurge_type == PSURGE_QUAD_ICEGRASS) - PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); - else - PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits); - mdelay(33); - out_8(psurge_sec_intr, ~0); - PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits); - PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); - if (psurge_type != PSURGE_QUAD_ICEGRASS) - PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits); - PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits); - mdelay(33); - PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits); - mdelay(33); - PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits); - mdelay(33); -} - -static int __init smp_psurge_probe(void) -{ - int i, ncpus; - - /* We don't do SMP on the PPC601 -- paulus */ - if (PVR_VER(mfspr(SPRN_PVR)) == 1) - return 1; - - /* - * The powersurge cpu board can be used in the generation - * of powermacs that have a socket for an upgradeable cpu card, - * including the 7500, 8500, 9500, 9600. - * The device tree doesn't tell you if you have 2 cpus because - * OF doesn't know anything about the 2nd processor. - * Instead we look for magic bits in magic registers, - * in the hammerhead memory controller in the case of the - * dual-cpu powersurge board. -- paulus. - */ - if (find_devices("hammerhead") == NULL) - return 1; - - hhead_base = ioremap(HAMMERHEAD_BASE, 0x800); - quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024); - psurge_sec_intr = hhead_base + HHEAD_SEC_INTR; - - psurge_type = psurge_quad_probe(); - if (psurge_type != PSURGE_DUAL) { - psurge_quad_init(); - /* All released cards using this HW design have 4 CPUs */ - ncpus = 4; - } else { - iounmap(quad_base); - if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { - /* not a dual-cpu card */ - iounmap(hhead_base); - psurge_type = PSURGE_NONE; - return 1; - } - ncpus = 2; - } - - psurge_start = ioremap(PSURGE_START, 4); - psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - - /* this is not actually strictly necessary -- paulus. */ - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; - - if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); - - return ncpus; -} - -static void __init smp_psurge_kick_cpu(int nr) -{ - unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; - unsigned long a; - - /* may need to flush here if secondary bats aren't setup */ - for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) - asm volatile("dcbf 0,%0" : : "r" (a) : "memory"); - asm volatile("sync"); - - if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); - - out_be32(psurge_start, start); - mb(); - - psurge_set_ipi(nr); - udelay(10); - psurge_clr_ipi(nr); - - if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); -} - -/* - * With the dual-cpu powersurge board, the decrementers and timebases - * of both cpus are frozen after the secondary cpu is started up, - * until we give the secondary cpu another interrupt. This routine - * uses this to get the timebases synchronized. - * -- paulus. - */ -static void __init psurge_dual_sync_tb(int cpu_nr) -{ - int t; - - set_dec(tb_ticks_per_jiffy); - set_tb(0, 0); - last_jiffy_stamp(cpu_nr) = 0; - - if (cpu_nr > 0) { - mb(); - sec_tb_reset = 1; - return; - } - - /* wait for the secondary to have reset its TB before proceeding */ - for (t = 10000000; t > 0 && !sec_tb_reset; --t) - ; - - /* now interrupt the secondary, starting both TBs */ - psurge_set_ipi(1); - - smp_tb_synchronized = 1; -} - -static struct irqaction psurge_irqaction = { - .handler = psurge_primary_intr, - .flags = SA_INTERRUPT, - .mask = CPU_MASK_NONE, - .name = "primary IPI", -}; - -static void __init smp_psurge_setup_cpu(int cpu_nr) -{ - - if (cpu_nr == 0) { - /* If we failed to start the second CPU, we should still - * send it an IPI to start the timebase & DEC or we might - * have them stuck. - */ - if (num_online_cpus() < 2) { - if (psurge_type == PSURGE_DUAL) - psurge_set_ipi(1); - return; - } - /* reset the entry point so if we get another intr we won't - * try to startup again */ - out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) - printk(KERN_ERR "Couldn't get primary IPI interrupt"); - } - - if (psurge_type == PSURGE_DUAL) - psurge_dual_sync_tb(cpu_nr); -} - -void __init smp_psurge_take_timebase(void) -{ - /* Dummy implementation */ -} - -void __init smp_psurge_give_timebase(void) -{ - /* Dummy implementation */ -} - -static int __init smp_core99_probe(void) -{ -#ifdef CONFIG_6xx - extern int powersave_nap; -#endif - struct device_node *cpus, *firstcpu; - int i, ncpus = 0, boot_cpu = -1; - u32 *tbprop = NULL; - - if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345); - cpus = firstcpu = find_type_devices("cpu"); - while(cpus != NULL) { - u32 *regprop = (u32 *)get_property(cpus, "reg", NULL); - char *stateprop = (char *)get_property(cpus, "state", NULL); - if (regprop != NULL && stateprop != NULL && - !strncmp(stateprop, "running", 7)) - boot_cpu = *regprop; - ++ncpus; - cpus = cpus->next; - } - if (boot_cpu == -1) - printk(KERN_WARNING "Couldn't detect boot CPU !\n"); - if (boot_cpu != 0) - printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu); - - if (machine_is_compatible("MacRISC4")) { - extern struct smp_ops_t core99_smp_ops; - - core99_smp_ops.take_timebase = smp_generic_take_timebase; - core99_smp_ops.give_timebase = smp_generic_give_timebase; - } else { - if (firstcpu != NULL) - tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL); - if (tbprop) - core99_tb_gpio = *tbprop; - else - core99_tb_gpio = KL_GPIO_TB_ENABLE; - } - - if (ncpus > 1) { - openpic_request_IPIs(); - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; -#ifdef CONFIG_6xx - powersave_nap = 0; -#endif - core99_init_caches(0); - } - - return ncpus; -} - -static void __devinit smp_core99_kick_cpu(int nr) -{ - unsigned long save_vector, new_vector; - unsigned long flags; - - volatile unsigned long *vector - = ((volatile unsigned long *)(KERNELBASE+0x100)); - if (nr < 0 || nr > 3) - return; - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); - - local_irq_save(flags); - local_irq_disable(); - - /* Save reset vector */ - save_vector = *vector; - - /* Setup fake reset vector that does - * b __secondary_start_pmac_0 + nr*8 - KERNELBASE - */ - new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; - *vector = 0x48000002 + new_vector - KERNELBASE; - - /* flush data cache and inval instruction cache */ - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); - - /* Put some life in our friend */ - pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); - - /* FIXME: We wait a bit for the CPU to take the exception, I should - * instead wait for the entry code to set something for me. Well, - * ideally, all that crap will be done in prom.c and the CPU left - * in a RAM-based wait loop like CHRP. - */ - mdelay(1); - - /* Restore our exception vector */ - *vector = save_vector; - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); - - local_irq_restore(flags); - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); -} - -static void __devinit smp_core99_setup_cpu(int cpu_nr) -{ - /* Setup L2/L3 */ - if (cpu_nr != 0) - core99_init_caches(cpu_nr); - - /* Setup openpic */ - do_openpic_setup_cpu(); - - if (cpu_nr == 0) { -#ifdef CONFIG_POWER4 - extern void g5_phy_disable_cpu1(void); - - /* If we didn't start the second CPU, we must take - * it off the bus - */ - if (machine_is_compatible("MacRISC4") && - num_online_cpus() < 2) - g5_phy_disable_cpu1(); -#endif /* CONFIG_POWER4 */ - if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349); - } -} - -/* not __init, called in sleep/wakeup code */ -void smp_core99_take_timebase(void) -{ - unsigned long flags; - - /* tell the primary we're here */ - sec_tb_reset = 1; - mb(); - - /* wait for the primary to set pri_tb_hi/lo */ - while (sec_tb_reset < 2) - mb(); - - /* set our stuff the same as the primary */ - local_irq_save(flags); - set_dec(1); - set_tb(pri_tb_hi, pri_tb_lo); - last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp; - mb(); - - /* tell the primary we're done */ - sec_tb_reset = 0; - mb(); - local_irq_restore(flags); -} - -/* not __init, called in sleep/wakeup code */ -void smp_core99_give_timebase(void) -{ - unsigned long flags; - unsigned int t; - - /* wait for the secondary to be in take_timebase */ - for (t = 100000; t > 0 && !sec_tb_reset; --t) - udelay(10); - if (!sec_tb_reset) { - printk(KERN_WARNING "Timeout waiting sync on second CPU\n"); - return; - } - - /* freeze the timebase and read it */ - /* disable interrupts so the timebase is disabled for the - shortest possible time */ - local_irq_save(flags); - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); - pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); - mb(); - pri_tb_hi = get_tbu(); - pri_tb_lo = get_tbl(); - pri_tb_stamp = last_jiffy_stamp(smp_processor_id()); - mb(); - - /* tell the secondary we're ready */ - sec_tb_reset = 2; - mb(); - - /* wait for the secondary to have taken it */ - for (t = 100000; t > 0 && sec_tb_reset; --t) - udelay(10); - if (sec_tb_reset) - printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); - else - smp_tb_synchronized = 1; - - /* Now, restart the timebase by leaving the GPIO to an open collector */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); - pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); - local_irq_restore(flags); -} - - -/* PowerSurge-style Macs */ -struct smp_ops_t psurge_smp_ops = { - .message_pass = smp_psurge_message_pass, - .probe = smp_psurge_probe, - .kick_cpu = smp_psurge_kick_cpu, - .setup_cpu = smp_psurge_setup_cpu, - .give_timebase = smp_psurge_give_timebase, - .take_timebase = smp_psurge_take_timebase, -}; - -/* Core99 Macs (dual G4s) */ -struct smp_ops_t core99_smp_ops = { - .message_pass = smp_openpic_message_pass, - .probe = smp_core99_probe, - .kick_cpu = smp_core99_kick_cpu, - .setup_cpu = smp_core99_setup_cpu, - .give_timebase = smp_core99_give_timebase, - .take_timebase = smp_core99_take_timebase, -}; - -#ifdef CONFIG_HOTPLUG_CPU - -int __cpu_disable(void) -{ - cpu_clear(smp_processor_id(), cpu_online_map); - - /* XXX reset cpu affinity here */ - openpic_set_priority(0xf); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - mb(); - udelay(20); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - return 0; -} - -extern void low_cpu_die(void) __attribute__((noreturn)); /* in pmac_sleep.S */ -static int cpu_dead[NR_CPUS]; - -void cpu_die(void) -{ - local_irq_disable(); - cpu_dead[smp_processor_id()] = 1; - mb(); - low_cpu_die(); -} - -void __cpu_die(unsigned int cpu) -{ - int timeout; - - timeout = 1000; - while (!cpu_dead[cpu]) { - if (--timeout == 0) { - printk("CPU %u refused to die!\n", cpu); - break; - } - msleep(1); - } - cpu_callin_map[cpu] = 0; - cpu_dead[cpu] = 0; -} - -#endif diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c deleted file mode 100644 index edb9fcc647..0000000000 --- a/arch/ppc/platforms/pmac_time.c +++ /dev/null @@ -1,291 +0,0 @@ -/* - * Support for periodic interrupts (100 per second) and for getting - * the current time from the RTC on Power Macintoshes. - * - * We use the decrementer register for our periodic interrupts. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -/* Apparently the RTC stores seconds since 1 Jan 1904 */ -#define RTC_OFFSET 2082844800 - -/* - * Calibrate the decrementer frequency with the VIA timer 1. - */ -#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ - -/* VIA registers */ -#define RS 0x200 /* skip between registers */ -#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ -#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ -#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ -#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ -#define ACR (11*RS) /* Auxiliary control register */ -#define IFR (13*RS) /* Interrupt flag register */ - -/* Bits in ACR */ -#define T1MODE 0xc0 /* Timer 1 mode */ -#define T1MODE_CONT 0x40 /* continuous interrupts */ - -/* Bits in IFR and IER */ -#define T1_INT 0x40 /* Timer 1 interrupt */ - -extern struct timezone sys_tz; - -long __init -pmac_time_init(void) -{ -#ifdef CONFIG_NVRAM - s32 delta = 0; - int dst; - - delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16; - delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8; - delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb); - if (delta & 0x00800000UL) - delta |= 0xFF000000UL; - dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0); - printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60, - dst ? "on" : "off"); - return delta; -#else - return 0; -#endif -} - -unsigned long -pmac_get_rtc_time(void) -{ -#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) - struct adb_request req; - unsigned long now; -#endif - - /* Get the time from the RTC */ - switch (sys_ctrler) { -#ifdef CONFIG_ADB_CUDA - case SYS_CTRLER_CUDA: - if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) - return 0; - while (!req.complete) - cuda_poll(); - if (req.reply_len != 7) - printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n", - req.reply_len); - now = (req.reply[3] << 24) + (req.reply[4] << 16) - + (req.reply[5] << 8) + req.reply[6]; - return now - RTC_OFFSET; -#endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) - return 0; - while (!req.complete) - pmu_poll(); - if (req.reply_len != 4) - printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n", - req.reply_len); - now = (req.reply[0] << 24) + (req.reply[1] << 16) - + (req.reply[2] << 8) + req.reply[3]; - return now - RTC_OFFSET; -#endif /* CONFIG_ADB_PMU */ - default: ; - } - return 0; -} - -int -pmac_set_rtc_time(unsigned long nowtime) -{ -#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) - struct adb_request req; -#endif - - nowtime += RTC_OFFSET; - - switch (sys_ctrler) { -#ifdef CONFIG_ADB_CUDA - case SYS_CTRLER_CUDA: - if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, - nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) - return 0; - while (!req.complete) - cuda_poll(); - if ((req.reply_len != 3) && (req.reply_len != 7)) - printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n", - req.reply_len); - return 1; -#endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - if (pmu_request(&req, NULL, 5, PMU_SET_RTC, - nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) - return 0; - while (!req.complete) - pmu_poll(); - if (req.reply_len != 0) - printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n", - req.reply_len); - return 1; -#endif /* CONFIG_ADB_PMU */ - default: - return 0; - } -} - -/* - * Calibrate the decrementer register using VIA timer 1. - * This is used both on powermacs and CHRP machines. - */ -int __init -via_calibrate_decr(void) -{ - struct device_node *vias; - volatile unsigned char __iomem *via; - int count = VIA_TIMER_FREQ_6 / 100; - unsigned int dstart, dend; - - vias = find_devices("via-cuda"); - if (vias == 0) - vias = find_devices("via-pmu"); - if (vias == 0) - vias = find_devices("via"); - if (vias == 0 || vias->n_addrs == 0) - return 0; - via = ioremap(vias->addrs[0].address, vias->addrs[0].size); - - /* set timer 1 for continuous interrupts */ - out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); - /* set the counter to a small value */ - out_8(&via[T1CH], 2); - /* set the latch to `count' */ - out_8(&via[T1LL], count); - out_8(&via[T1LH], count >> 8); - /* wait until it hits 0 */ - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dstart = get_dec(); - /* clear the interrupt & wait until it hits 0 again */ - in_8(&via[T1CL]); - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dend = get_dec(); - - tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); - tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", - tb_ticks_per_jiffy, dstart - dend); - - iounmap(via); - - return 1; -} - -#ifdef CONFIG_PM -/* - * Reset the time after a sleep. - */ -static int -time_sleep_notify(struct pmu_sleep_notifier *self, int when) -{ - static unsigned long time_diff; - unsigned long flags; - unsigned long seq; - - switch (when) { - case PBOOK_SLEEP_NOW: - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - time_diff = xtime.tv_sec - pmac_get_rtc_time(); - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - break; - case PBOOK_WAKE: - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = pmac_get_rtc_time() + time_diff; - xtime.tv_nsec = 0; - last_rtc_update = xtime.tv_sec; - write_sequnlock_irqrestore(&xtime_lock, flags); - break; - } - return PBOOK_SLEEP_OK; -} - -static struct pmu_sleep_notifier time_sleep_notifier = { - time_sleep_notify, SLEEP_LEVEL_MISC, -}; -#endif /* CONFIG_PM */ - -/* - * Query the OF and get the decr frequency. - * This was taken from the pmac time_init() when merging the prep/pmac - * time functions. - */ -void __init -pmac_calibrate_decr(void) -{ - struct device_node *cpu; - unsigned int freq, *fp; - -#ifdef CONFIG_PM - pmu_register_sleep_notifier(&time_sleep_notifier); -#endif /* CONFIG_PM */ - - /* We assume MacRISC2 machines have correct device-tree - * calibration. That's better since the VIA itself seems - * to be slightly off. --BenH - */ - if (!machine_is_compatible("MacRISC2") && - !machine_is_compatible("MacRISC3") && - !machine_is_compatible("MacRISC4")) - if (via_calibrate_decr()) - return; - - /* Special case: QuickSilver G4s seem to have a badly calibrated - * timebase-frequency in OF, VIA is much better on these. We should - * probably implement calibration based on the KL timer on these - * machines anyway... -BenH - */ - if (machine_is_compatible("PowerMac3,5")) - if (via_calibrate_decr()) - return; - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = find_type_devices("cpu"); - if (cpu == 0) - panic("can't find cpu node in time_init"); - fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL); - if (fp == 0) - panic("can't get cpu timebase frequency"); - freq = *fp; - printk("time_init: decrementer frequency = %u.%.6u MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); -} diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 84ef03018d..159dcd92a6 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -39,8 +39,6 @@ obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o obj-$(CONFIG_PCI_QSPAN) += qspan_pci.o obj-$(CONFIG_PPC_OF) += prom_init.o prom.o -obj-$(CONFIG_PPC_PMAC) += open_pic.o -obj-$(CONFIG_POWER4) += open_pic2.o obj-$(CONFIG_PPC_CHRP) += open_pic.o obj-$(CONFIG_PPC_PREP) += open_pic.o todc_time.o obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c index af4deace49..482f837fd3 100644 --- a/arch/ppc/syslib/prom.c +++ b/arch/ppc/syslib/prom.c @@ -70,8 +70,6 @@ int use_of_interrupt_tree; struct device_node *dflt_interrupt_controller; int num_interrupt_controllers; -int pmac_newworld; - extern unsigned int rtas_entry; /* physical pointer */ extern struct device_node *allnodes; @@ -123,22 +121,13 @@ finish_device_tree(void) unsigned long mem = (unsigned long) klimit; struct device_node *np; - /* All newworld pmac machines and CHRPs now use the interrupt tree */ + /* All CHRPs now use the interrupt tree */ for (np = allnodes; np != NULL; np = np->allnext) { if (get_property(np, "interrupt-parent", NULL)) { use_of_interrupt_tree = 1; break; } } - if (_machine == _MACH_Pmac && use_of_interrupt_tree) - pmac_newworld = 1; - -#ifdef CONFIG_BOOTX_TEXT - if (boot_infos && pmac_newworld) { - prom_print("WARNING ! BootX/miBoot booting is not supported on this machine\n"); - prom_print(" You should use an Open Firmware bootloader\n"); - } -#endif /* CONFIG_BOOTX_TEXT */ if (use_of_interrupt_tree) { /* @@ -434,16 +423,10 @@ finish_node_interrupts(struct device_node *np, unsigned long mem_start) * those machines, we want to offset interrupts from the * second openpic by 128 -- BenH */ - if (_machine != _MACH_Pmac && num_interrupt_controllers > 1 + if (num_interrupt_controllers > 1 && ic != NULL && get_property(ic, "interrupt-parent", NULL) == NULL) offset = 16; - else if (_machine == _MACH_Pmac && num_interrupt_controllers > 1 - && ic != NULL && ic->parent != NULL) { - char *name = get_property(ic->parent, "name", NULL); - if (name && !strcmp(name, "u3")) - offset = 128; - } np->intrs[i].line = irq[0] + offset; if (n > 1) diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index c80177f8ec..4344cbe9b5 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -27,11 +26,9 @@ static volatile unsigned char *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; static int xmon_expect(const char *str, unsigned int timeout); -static int use_serial; static int use_screen; static int via_modem; static int xmon_use_sccb; -static struct device_node *channel_node; #define TB_SPEED 25000000 @@ -112,96 +109,21 @@ xmon_map_scc(void) #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char *base; - if (_machine == _MACH_Pmac) { - struct device_node *np; - unsigned long addr; -#ifdef CONFIG_BOOTX_TEXT - if (!use_screen && !use_serial - && !machine_is_compatible("iMac")) { - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (np = find_devices("keyboard"); np; np = np->next) - if (np->parent && np->parent->type - && strcmp(np->parent->type, "adb") == 0) - break; - - /* needs to be hacked if xmon_printk is to be used - from within find_via_pmu() */ -#ifdef CONFIG_ADB_PMU - if (np != NULL && boot_text_mapped && find_via_pmu()) - use_screen = 1; -#endif -#ifdef CONFIG_ADB_CUDA - if (np != NULL && boot_text_mapped && find_via_cuda()) - use_screen = 1; -#endif - } - if (!use_screen && (np = find_devices("escc")) != NULL) { - /* - * look for the device node for the serial port - * we're using and see if it says it has a modem - */ - char *name = xmon_use_sccb? "ch-b": "ch-a"; - char *slots; - int l; - - np = np->child; - while (np != NULL && strcmp(np->name, name) != 0) - np = np->sibling; - if (np != NULL) { - /* XXX should parse this properly */ - channel_node = np; - slots = get_property(np, "slot-names", &l); - if (slots != NULL && l >= 10 - && strcmp(slots+4, "Modem") == 0) - via_modem = 1; - } - } - btext_drawstring("xmon uses "); - if (use_screen) - btext_drawstring("screen and keyboard\n"); - else { - if (via_modem) - btext_drawstring("modem on "); - btext_drawstring(xmon_use_sccb? "printer": "modem"); - btext_drawstring(" port\n"); - } - -#endif /* CONFIG_BOOTX_TEXT */ - -#ifdef CHRP_ESCC - addr = 0xc1013020; -#else - addr = 0xf3013020; -#endif - TXRDY = 4; - RXRDY = 1; - - np = find_devices("mac-io"); - if (np && np->n_addrs) - addr = np->addrs[0].address + 0x13020; - base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE); - sccc = base + (addr & ~PAGE_MASK); - sccd = sccc + 0x10; - - } #ifdef CONFIG_PPC_CHRP - else { - base = (volatile unsigned char *) isa_io_base; - if (_machine == _MACH_chrp) - base = (volatile unsigned char *) - ioremap(chrp_find_phys_io_base(), 0x1000); - - sccc = base + 0x3fd; - sccd = base + 0x3f8; - if (xmon_use_sccb) { - sccc -= 0x100; - sccd -= 0x100; - } - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; + base = (volatile unsigned char *) isa_io_base; + if (_machine == _MACH_chrp) + base = (volatile unsigned char *) + ioremap(chrp_find_phys_io_base(), 0x1000); + + sccc = base + 0x3fd; + sccd = base + 0x3f8; + if (xmon_use_sccb) { + sccc -= 0x100; + sccd -= 0x100; } + TXRDY = 0x20; + RXRDY = 1; + DLAB = 0x80; #endif /* CONFIG_PPC_CHRP */ #elif defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ @@ -385,16 +307,6 @@ xmon_read_poll(void) return *sccd; } -static unsigned char scc_inittab[] = { - 13, 0, /* set baud rate divisor */ - 12, 1, - 14, 1, /* baud rate gen enable, src=rtxc */ - 11, 0x50, /* clocks = br gen */ - 5, 0xea, /* tx 8 bits, assert DTR & RTS */ - 4, 0x46, /* x16 clock, 1 stop */ - 3, 0xc1, /* rx enable, 8 bits */ -}; - void xmon_init_scc(void) { @@ -407,43 +319,6 @@ xmon_init_scc(void) sccd[3] = 3; eieio(); /* LCR = 8N1 */ sccd[1] = 0; eieio(); /* IER = 0 */ } - else if ( _machine == _MACH_Pmac ) - { - int i, x; - - if (channel_node != 0) - pmac_call_feature( - PMAC_FTR_SCC_ENABLE, - channel_node, - PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); - printk(KERN_INFO "Serial port locked ON by debugger !\n"); - if (via_modem && channel_node != 0) { - unsigned int t0; - - pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, - channel_node, 0, 1); - printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = readtb(); - while (readtb() - t0 < 3*TB_SPEED) - eieio(); - } - /* use the B channel if requested */ - if (xmon_use_sccb) { - sccc = (volatile unsigned char *) - ((unsigned long)sccc & ~0x20); - sccd = sccc + 0x10; - } - for (i = 20000; i != 0; --i) { - x = *sccc; eieio(); - } - *sccc = 9; eieio(); /* reset A or B side */ - *sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio(); - for (i = 0; i < sizeof(scc_inittab); ++i) { - *sccc = scc_inittab[i]; - eieio(); - } - } scc_initialized = 1; if (via_modem) { for (;;) { @@ -632,19 +507,9 @@ xmon_fgets(char *str, int nb, void *f) void xmon_enter(void) { -#ifdef CONFIG_ADB_PMU - if (_machine == _MACH_Pmac) { - pmu_suspend(); - } -#endif } void xmon_leave(void) { -#ifdef CONFIG_ADB_PMU - if (_machine == _MACH_Pmac) { - pmu_resume(); - } -#endif } diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 9075a7538e..bdaf6597b4 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -16,9 +16,6 @@ #include #include #include -#ifdef CONFIG_PMAC_BACKLIGHT -#include -#endif #include "nonstdio.h" #include "privinst.h" @@ -260,16 +257,6 @@ int xmon(struct pt_regs *excp) */ #endif /* CONFIG_SMP */ remove_bpts(); -#ifdef CONFIG_PMAC_BACKLIGHT - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - set_backlight_enable(1); - set_backlight_level(BACKLIGHT_MAX); - sync(); - } - debugger_fault_handler = NULL; -#endif /* CONFIG_PMAC_BACKLIGHT */ cmd = cmds(excp); if (cmd == 's') { xmon_trace[smp_processor_id()] = SSTEP; diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 097d668c4f..556895e996 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2734,7 +2734,7 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) * BIOS does tho. Right now, all this PM stuff is pmac-only for that * reason. --BenH */ -#if defined(CONFIG_PM) && defined(CONFIG_PPC_OF) +#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) if (_machine == _MACH_Pmac && rinfo->of_node) { if (rinfo->is_mobility && rinfo->pm_reg && rinfo->family <= CHIP_FAMILY_RV250) @@ -2778,12 +2778,12 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000); #endif } -#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_OF) */ +#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) */ } void radeonfb_pm_exit(struct radeonfb_info *rinfo) { -#if defined(CONFIG_PM) && defined(CONFIG_PPC_OF) +#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) if (rinfo->pm_mode != radeon_pm_none) pmac_set_early_video_resume(NULL, NULL); #endif diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h index eb317a0806..6d431d6fb0 100644 --- a/include/asm-ppc/prom.h +++ b/include/asm-ppc/prom.h @@ -167,6 +167,14 @@ extern int of_address_to_resource(struct device_node *dev, int index, extern int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r); +#ifndef CONFIG_PPC_OF +/* + * Fallback definitions for builds where we don't have prom.c included. + */ +#define machine_is_compatible(x) 0 +#define of_find_compatible_node(f, t, c) NULL +#define get_property(p, n, l) NULL +#endif #endif /* _PPC_PROM_H */ #endif /* __KERNEL__ */