From: Greg Ungerer Date: Fri, 1 Feb 2008 07:40:26 +0000 (+1000) Subject: m68knommu: switch ColdFire TIMER to use GENERIC_TIME X-Git-Tag: v2.6.25-rc1~1095 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a7f61fa43e9b5622de5568b695b87c2166c49ea2;p=linux-2.6 m68knommu: switch ColdFire TIMER to use GENERIC_TIME Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index 489dec85c8..a60213e877 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -3,7 +3,7 @@ /* * timers.c -- generic ColdFire hardware timer support. * - * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1999-2008, Greg Ungerer */ /***************************************************************************/ @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include #include @@ -25,6 +27,7 @@ /* * By default use timer1 as the system clock timer. */ +#define FREQ (MCF_BUSCLK / 16) #define TA(a) (MCF_MBAR + MCFTIMER_BASE1 + (a)) /* @@ -41,7 +44,7 @@ unsigned int mcf_timerlevel = 5; * Unfortunately it is a little different on each ColdFire. */ extern void mcf_settimericr(int timer, int level); -extern int mcf_timerirqpending(int timer); +void coldfire_profile_init(void); #if defined(CONFIG_M532x) #define __raw_readtrr __raw_readl @@ -51,38 +54,70 @@ extern int mcf_timerirqpending(int timer); #define __raw_writetrr __raw_writew #endif +static u32 mcftmr_cycles_per_jiffy; +static u32 mcftmr_cnt; + /***************************************************************************/ -static irqreturn_t hw_tick(int irq, void *dummy) +static irqreturn_t mcftmr_tick(int irq, void *dummy) { /* Reset the ColdFire timer */ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER)); + mcftmr_cnt += mcftmr_cycles_per_jiffy; return arch_timer_interrupt(irq, dummy); } /***************************************************************************/ -static struct irqaction coldfire_timer_irq = { +static struct irqaction mcftmr_timer_irq = { .name = "timer", .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = hw_tick, + .handler = mcftmr_tick, }; /***************************************************************************/ -static int ticks_per_intr; +static cycle_t mcftmr_read_clk(void) +{ + unsigned long flags; + u32 cycles; + u16 tcn; + + local_irq_save(flags); + tcn = __raw_readw(TA(MCFTIMER_TCN)); + cycles = mcftmr_cnt; + local_irq_restore(flags); + + return cycles + tcn; +} + +/***************************************************************************/ + +static struct clocksource mcftmr_clk = { + .name = "tmr", + .rating = 250, + .read = mcftmr_read_clk, + .shift = 20, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/***************************************************************************/ void hw_timer_init(void) { - setup_irq(mcf_timervector, &coldfire_timer_irq); + setup_irq(mcf_timervector, &mcftmr_timer_irq); __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); - ticks_per_intr = (MCF_BUSCLK / 16) / HZ; - __raw_writetrr(ticks_per_intr - 1, TA(MCFTIMER_TRR)); + mcftmr_cycles_per_jiffy = FREQ / HZ; + __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR)); + mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift); + clocksource_register(&mcftmr_clk); + mcf_settimericr(1, mcf_timerlevel); #ifdef CONFIG_HIGHPROFILE @@ -90,21 +125,6 @@ void hw_timer_init(void) #endif } -/***************************************************************************/ - -unsigned long hw_timer_offset(void) -{ - unsigned long tcn, offset; - - tcn = __raw_readw(TA(MCFTIMER_TCN)); - offset = ((tcn + 1) * (1000000 / HZ)) / ticks_per_intr; - - /* Check if we just wrapped the counters and maybe missed a tick */ - if ((offset < (1000000 / HZ / 2)) && mcf_timerirqpending(1)) - offset += 1000000 / HZ; - return offset; -} - /***************************************************************************/ #ifdef CONFIG_HIGHPROFILE /***************************************************************************/