From: Mikael Pettersson Date: Mon, 2 Jul 2007 23:09:05 +0000 (+0200) Subject: sata_promise: SATA hotplug support, take 2 X-Git-Tag: v2.6.23-rc1~1108^2~18 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a77720ad0a4049e4bc6355e4febf899966a48222;p=linux-2.6 sata_promise: SATA hotplug support, take 2 This patch enables hotplugging of SATA devices in the sata_promise driver. It's been tested successfully on both first- and second-generation Promise SATA chips: SATA150 TX2plus, SATAII150 TX2plus, SATAII150 TX4, SATA300 TX2plus, and SATA300 TX4. The only quirk I've seen is that hotplugging (insertion) on the first-generation SATA150 TX2plus requires a lengthier EH sequence than on the second-generation chips. On the second-generation chips a simple soft reset seems to suffice, but on the first-generation chip there's a "port is slow to respond" after the initial soft reset, after which libata issues a hard reset, and then the device is recognised. The hotplug checks are high up in the interrupt handling path, not deep down in error_intr as in ahci/sata_sil24. That's because the chip doesn't signal hotplug status changes in the per-port status register: instead a global register contains hotplug control and status flags for all ports. I considered following the ahci/sata_sil24 structure, but that would have required non-trivial changes to the interrupt handling path, so I chose to keep the hotplug changes simple and unobtrusive. Signed-off-by: Mikael Pettersson -- This patch depends on the "sata_promise: cleanups" patch. Changes since the previous version (posted June 19): - Correct pdc_interrupt() to increment 'handled' also in the hotplug case. This prevents IRQ_NONE from being returned when an interrupt only has hotplug events to handle, which could confuse the kernel's IRQ machinery. - Added testing on the SATAII150 TX4. drivers/ata/sata_promise.c | 41 ++++++++++++++++++++++++++++++++++++----- 1 files changed, 36 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 2ad5872fe9..d2fcb9a6be 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -45,7 +45,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "2.08" +#define DRV_VERSION "2.09" enum { PDC_MAX_PORTS = 4, @@ -716,6 +716,9 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) unsigned int i, tmp; unsigned int handled = 0; void __iomem *mmio_base; + unsigned int hotplug_offset, ata_no; + u32 hotplug_status; + int is_sataii_tx4; VPRINTK("ENTER\n"); @@ -726,10 +729,20 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) mmio_base = host->iomap[PDC_MMIO_BAR]; + /* read and clear hotplug flags for all ports */ + if (host->ports[0]->flags & PDC_FLAG_GEN_II) + hotplug_offset = PDC2_SATA_PLUG_CSR; + else + hotplug_offset = PDC_SATA_PLUG_CSR; + hotplug_status = readl(mmio_base + hotplug_offset); + if (hotplug_status & 0xff) + writel(hotplug_status | 0xff, mmio_base + hotplug_offset); + hotplug_status &= 0xff; /* clear uninteresting bits */ + /* reading should also clear interrupts */ mask = readl(mmio_base + PDC_INT_SEQMASK); - if (mask == 0xffffffff) { + if (mask == 0xffffffff && hotplug_status == 0) { VPRINTK("QUICK EXIT 2\n"); return IRQ_NONE; } @@ -737,16 +750,34 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) spin_lock(&host->lock); mask &= 0xffff; /* only 16 tags possible */ - if (!mask) { + if (mask == 0 && hotplug_status == 0) { VPRINTK("QUICK EXIT 3\n"); goto done_irq; } writel(mask, mmio_base + PDC_INT_SEQMASK); + is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags); + for (i = 0; i < host->n_ports; i++) { VPRINTK("port %u\n", i); ap = host->ports[i]; + + /* check for a plug or unplug event */ + ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); + tmp = hotplug_status & (0x11 << ata_no); + if (tmp && ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_eh_info *ehi = &ap->eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp); + ata_port_freeze(ap); + ++handled; + continue; + } + + /* check for a packet interrupt */ tmp = mask & (1 << (i + 1)); if (tmp && ap && !(ap->flags & ATA_FLAG_DISABLED)) { @@ -902,9 +933,9 @@ static void pdc_host_init(struct ata_host *host) tmp = readl(mmio + hotplug_offset); writel(tmp | 0xff, mmio + hotplug_offset); - /* mask plug/unplug ints */ + /* unmask plug/unplug ints */ tmp = readl(mmio + hotplug_offset); - writel(tmp | 0xff0000, mmio + hotplug_offset); + writel(tmp & ~0xff0000, mmio + hotplug_offset); /* don't initialise TBG or SLEW on 2nd generation chips */ if (is_gen2)